| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2010 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <console/console.h> |
| #include <arch/io.h> |
| #include <arch/acpi.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <device/pci_ops.h> |
| #include <cpu/x86/msr.h> |
| #include <cpu/amd/mtrr.h> |
| #include "rs780.h" |
| |
| /***************************************** |
| * rs780_config_misc_clk() |
| *****************************************/ |
| void static rs780_config_misc_clk(struct device *nb_dev) |
| { |
| u32 reg; |
| u16 word; |
| u8 byte; |
| struct bus pbus; /* fake bus for dev0 fun1 */ |
| |
| reg = pci_read_config32(nb_dev, 0x4c); |
| reg |= 1 << 0; |
| pci_write_config32(nb_dev, 0x4c, reg); |
| |
| word = pci_cf8_conf1.read16(&pbus, 0, 1, 0xf8); |
| word &= 0xf00; |
| pci_cf8_conf1.write16(&pbus, 0, 1, 0xf8, word); |
| |
| word = pci_cf8_conf1.read16(&pbus, 0, 1, 0xe8); |
| word &= ~((1 << 12) | (1 << 13) | (1 << 14)); |
| word |= 1 << 13; |
| pci_cf8_conf1.write16(&pbus, 0, 1, 0xe8, word); |
| |
| reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x94); |
| reg &= ~((1 << 16) | (1 << 24) | (1 << 28)); |
| pci_cf8_conf1.write32(&pbus, 0, 1, 0x94, reg); |
| |
| reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x8c); |
| reg &= ~((1 << 13) | (1 << 14) | (1 << 24) | (1 << 25)); |
| reg |= 1 << 13; |
| pci_cf8_conf1.write32(&pbus, 0, 1, 0x8c, reg); |
| |
| reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0xcc); |
| reg |= 1 << 24; |
| pci_cf8_conf1.write32(&pbus, 0, 1, 0xcc, reg); |
| |
| reg = nbmc_read_index(nb_dev, 0x7a); |
| reg &= ~0x3f; |
| reg |= 1 << 2; |
| reg &= ~(1 << 6); |
| set_htiu_enable_bits(nb_dev, 0x05, 1 << 11, 1 << 11); |
| nbmc_write_index(nb_dev, 0x7a, reg); |
| /* Powering Down efuse and strap block clocks after boot-up. GFX Mode. */ |
| reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0xcc); |
| reg &= ~(1 << 23); |
| reg |= 1 << 24; |
| pci_cf8_conf1.write32(&pbus, 0, 1, 0xcc, reg); |
| |
| /* Programming NB CLK table. */ |
| byte = pci_cf8_conf1.read8(&pbus, 0, 1, 0xe0); |
| byte |= 0x01; |
| pci_cf8_conf1.write8(&pbus, 0, 1, 0xe0, byte); |
| |
| #if 0 |
| /* Powerdown reference clock to graphics core PLL in northbridge only mode */ |
| reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0x8c); |
| reg |= 1 << 21; |
| pci_cf8_conf1.write32(&pbus, 0, 1, 0x8c, reg); |
| |
| /* Powering Down efuse and strap block clocks after boot-up. NB Only Mode. */ |
| reg = pci_cf8_conf1.read32(&pbus, 0, 1, 0xcc); |
| reg |= (1 << 23) | (1 << 24); |
| pci_cf8_conf1.write32(&pbus, 0, 1, 0xcc, reg); |
| |
| /* Powerdown clock to memory controller in northbridge only mode */ |
| byte = pci_cf8_conf1.read8(&pbus, 0, 1, 0xe4); |
| byte |= 1 << 0; |
| pci_cf8_conf1.write8(&pbus, 0, 1, 0xe4, reg); |
| |
| /* CLKCFG:0xE8 Bit[17] = 0x1 Powerdown clock to IOC GFX block in no external graphics mode */ |
| /* TODO: */ |
| #endif |
| |
| reg = pci_read_config32(nb_dev, 0x4c); |
| reg &= ~(1 << 0); |
| pci_write_config32(nb_dev, 0x4c, reg); |
| |
| set_htiu_enable_bits(nb_dev, 0x05, 7 << 8, 7 << 8); |
| } |
| |
| static u32 get_vid_did(struct device *dev) |
| { |
| return pci_read_config32(dev, 0); |
| } |
| |
| static void rs780_nb_pci_table(struct device *nb_dev) |
| { /* NBPOR_InitPOR function. */ |
| u8 temp8; |
| u16 temp16; |
| u32 temp32; |
| |
| /* Program NB PCI table. */ |
| temp16 = pci_read_config16(nb_dev, 0x04); |
| printk(BIOS_DEBUG, "NB_PCI_REG04 = %x.\n", temp16); |
| temp32 = pci_read_config32(nb_dev, 0x84); |
| printk(BIOS_DEBUG, "NB_PCI_REG84 = %x.\n", temp32); |
| |
| pci_write_config8(nb_dev, 0x4c, 0x42); |
| |
| temp8 = pci_read_config8(nb_dev, 0x4e); |
| temp8 |= 0x05; |
| pci_write_config8(nb_dev, 0x4e, temp8); |
| |
| temp32 = pci_read_config32(nb_dev, 0x4c); |
| printk(BIOS_DEBUG, "NB_PCI_REG4C = %x.\n", temp32); |
| |
| /* set temporary NB TOM to 0x40000000. */ |
| rs780_set_tom(nb_dev); |
| |
| /* Program NB HTIU table. */ |
| #if 0 |
| set_htiu_enable_bits(nb_dev, 0x05, 1<<10 | 1<<9, 1<<10|1<<9); |
| set_htiu_enable_bits(nb_dev, 0x06, 1, 0x4203a202); |
| set_htiu_enable_bits(nb_dev, 0x07, 1<<1 | 1<<2, 0x8001); |
| set_htiu_enable_bits(nb_dev, 0x15, 0, 1<<31 | 1<<30 | 1<<27); |
| set_htiu_enable_bits(nb_dev, 0x1c, 0, 0xfffe0000); |
| set_htiu_enable_bits(nb_dev, 0x4b, 1<<11, 1<<11); |
| set_htiu_enable_bits(nb_dev, 0x0c, 0x3f, 1 | 1<<3); |
| set_htiu_enable_bits(nb_dev, 0x17, 1<<1 | 1<<27, 1<<1); |
| set_htiu_enable_bits(nb_dev, 0x17, 0, 1<<30); |
| set_htiu_enable_bits(nb_dev, 0x19, 0xfffff+(1<<31), 0x186a0+(1<<31)); |
| set_htiu_enable_bits(nb_dev, 0x16, 0x3f<<10, 0x7<<10); |
| set_htiu_enable_bits(nb_dev, 0x23, 0, 1<<28); |
| |
| /* Program NB MISC table. */ |
| set_nbmisc_enable_bits(nb_dev, 0x0b, 0xffff, 0x00000180); |
| set_nbmisc_enable_bits(nb_dev, 0x00, 0xffff, 0x00000106); |
| set_nbmisc_enable_bits(nb_dev, 0x51, 0xffffffff, 0x00100100); |
| set_nbmisc_enable_bits(nb_dev, 0x53, 0xffffffff, 0x00100100); |
| set_nbmisc_enable_bits(nb_dev, 0x55, 0xffffffff, 0x00100100); |
| set_nbmisc_enable_bits(nb_dev, 0x57, 0xffffffff, 0x00100100); |
| set_nbmisc_enable_bits(nb_dev, 0x59, 0xffffffff, 0x00100100); |
| set_nbmisc_enable_bits(nb_dev, 0x5b, 0xffffffff, 0x00100100); |
| set_nbmisc_enable_bits(nb_dev, 0x5d, 0xffffffff, 0x00100100); |
| set_nbmisc_enable_bits(nb_dev, 0x5f, 0xffffffff, 0x00100100); |
| set_nbmisc_enable_bits(nb_dev, 0x20, 1<<1, 0); |
| set_nbmisc_enable_bits(nb_dev, 0x37, 1<<11|1<<12|1<<13|1<<26, 0); |
| set_nbmisc_enable_bits(nb_dev, 0x68, 1<<5|1<<6, 1<<5); |
| set_nbmisc_enable_bits(nb_dev, 0x6b, 1<<22, 1<<10); |
| set_nbmisc_enable_bits(nb_dev, 0x67, 1<<26, 1<<14|1<<10); |
| set_nbmisc_enable_bits(nb_dev, 0x24, 1<<28|1<<26|1<<25|1<<16, 1<<29|1<<25); |
| set_nbmisc_enable_bits(nb_dev, 0x38, 1<<24|1<<25, 1<<24); |
| set_nbmisc_enable_bits(nb_dev, 0x36, 1<<29, 1<<29|1<<28); |
| set_nbmisc_enable_bits(nb_dev, 0x0c, 0, 1<<13); |
| set_nbmisc_enable_bits(nb_dev, 0x34, 1<<22, 1<<10); |
| set_nbmisc_enable_bits(nb_dev, 0x39, 1<<10, 1<<30); |
| set_nbmisc_enable_bits(nb_dev, 0x22, 1<<3, 0); |
| set_nbmisc_enable_bits(nb_dev, 0x68, 1<<19, 0); |
| set_nbmisc_enable_bits(nb_dev, 0x24, 1<<16|1<<17, 1<<17); |
| set_nbmisc_enable_bits(nb_dev, 0x6a, 1<<22|1<<23, 1<<17|1<<23); |
| set_nbmisc_enable_bits(nb_dev, 0x35, 1<<21|1<<22, 1<<22); |
| set_nbmisc_enable_bits(nb_dev, 0x01, 0xffffffff, 0x48); |
| |
| /* the last two step. */ |
| set_nbmisc_enable_bits(nb_dev, 0x01, 1<<8, 1<<8); |
| set_htiu_enable_bits(nb_dev, 0x2d, 1<<6|1<<4, 1<<6|1<<4); |
| #endif |
| } |
| |
| static void rs780_nb_gfx_dev_table(struct device *nb_dev, struct device *dev) |
| { |
| /* NB_InitGFXStraps */ |
| u32 MMIOBase, apc04, apc18, apc24, romstrap2; |
| volatile u32 *strap; |
| |
| /* Choose a base address that is unused and routed to the RS780. */ |
| MMIOBase = 0xFFB00000; |
| |
| /* 1E: NB_BIF_SPARE */ |
| set_nbmisc_enable_bits(nb_dev, 0x1e, 0xffffffff, 1<<1 | 1<<4 | 1<<6 | 1<<7); |
| /* Set a temporary Bus number. */ |
| apc18 = pci_read_config32(dev, 0x18); |
| pci_write_config32(dev, 0x18, 0x010100); |
| /* Set MMIO window for AGP target(graphics controller). */ |
| apc24 = pci_read_config32(dev, 0x24); |
| pci_write_config32(dev, 0x24, (MMIOBase>>16)+((MMIOBase+0x20000)&0xffff0000)); |
| /* Enable memory access. */ |
| apc04 = pci_read_config32(dev, 0x04); |
| pci_write_config8(dev, 0x04, 0x02); |
| |
| /* Program Straps. */ |
| romstrap2 = 1 << 26; // enables audio function |
| #if IS_ENABLED(CONFIG_GFXUMA) |
| // bits 7-9: aperture size |
| // 0-7: 128mb, 256mb, 64mb, 32mb, 512mb, 1g, 2g, 4g |
| if (uma_memory_size == 0x02000000) romstrap2 |= 3 << 7; |
| if (uma_memory_size == 0x04000000) romstrap2 |= 2 << 7; |
| if (uma_memory_size == 0x08000000) romstrap2 |= 0 << 7; |
| if (uma_memory_size == 0x10000000) romstrap2 |= 1 << 7; |
| if (uma_memory_size == 0x20000000) romstrap2 |= 4 << 7; |
| if (uma_memory_size == 0x40000000) romstrap2 |= 5 << 7; |
| if (uma_memory_size == 0x80000000) romstrap2 |= 6 << 7; |
| #endif |
| strap = (volatile u32 *)(MMIOBase + 0x15020); |
| *strap = romstrap2; |
| strap = (volatile u32 *)(MMIOBase + 0x15000); |
| *strap = 0x2c006300; |
| strap = (volatile u32 *)(MMIOBase + 0x15010); |
| *strap = 0x03015330; |
| strap = (volatile u32 *)(MMIOBase + 0x15020); |
| *strap = romstrap2 | 0x00000040; |
| strap = (volatile u32 *)(MMIOBase + 0x15030); |
| *strap = 0x00001002; |
| strap = (volatile u32 *)(MMIOBase + 0x15040); |
| *strap = 0x00000000; |
| strap = (volatile u32 *)(MMIOBase + 0x15050); |
| *strap = 0x00000000; |
| strap = (volatile u32 *)(MMIOBase + 0x15220); |
| *strap = 0x03c03800; |
| strap = (volatile u32 *)(MMIOBase + 0x15060); |
| *strap = 0x00000000; |
| |
| /* BIF switches into normal functional mode. */ |
| set_nbmisc_enable_bits(nb_dev, 0x1e, 1<<4 | 1<<5, 1<<5); |
| |
| /* NB Revision is A12 or newer */ |
| if (get_nb_rev(nb_dev) >= REV_RS780_A12) |
| set_nbmisc_enable_bits(nb_dev, 0x1e, 1<<9, 1<<9); |
| |
| /* Restore APC04, APC18, APC24. */ |
| pci_write_config32(dev, 0x04, apc04); |
| pci_write_config32(dev, 0x18, apc18); |
| pci_write_config32(dev, 0x24, apc24); |
| |
| printk(BIOS_INFO, "GC is accessible from now on.\n"); |
| } |
| |
| /*********************************************** |
| * 0:00.0 NBCFG : |
| * 0:00.1 CLK : bit 0 of nb_cfg 0x4c : 0 - disable, default |
| * 0:01.0 P2P Internal: |
| * 0:02.0 P2P : bit 2 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 |
| * 0:03.0 P2P : bit 3 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 |
| * 0:04.0 P2P : bit 4 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 |
| * 0:05.0 P2P : bit 5 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 |
| * 0:06.0 P2P : bit 6 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 |
| * 0:07.0 P2P : bit 7 of nbmiscind 0x0c : 0 - enable, default + 32 * 2 |
| * 0:08.0 NB2SB : bit 6 of nbmiscind 0x00 : 0 - disable, default + 32 * 1 |
| * case 0 will be called twice, one is by CPU in hypertransport.c line458, |
| * the other is by rs780. |
| ***********************************************/ |
| void rs780_enable(struct device *dev) |
| { |
| struct device *nb_dev = NULL, *sb_dev = NULL; |
| int dev_ind; |
| |
| printk(BIOS_INFO, "rs780_enable: dev=%p, VID_DID=0x%x\n", dev, get_vid_did(dev)); |
| |
| nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0)); |
| if (!nb_dev) { |
| die("rs780_enable: CAN NOT FIND RS780 DEVICE, HALT!\n"); |
| /* NOT REACHED */ |
| } |
| |
| /* sb_dev (dev 8) is a bridge that links to southbridge. */ |
| sb_dev = dev_find_slot(0, PCI_DEVFN(8, 0)); |
| if (!sb_dev) { |
| die("rs780_enable: CAN NOT FIND SB bridge, HALT!\n"); |
| /* NOT REACHED */ |
| } |
| |
| dev_ind = dev->path.pci.devfn >> 3; |
| switch (dev_ind) { |
| case 0: /* bus0, dev0, fun0; */ |
| printk(BIOS_INFO, "Bus-0, Dev-0, Fun-0.\n"); |
| enable_pcie_bar3(nb_dev); /* PCIEMiscInit */ |
| config_gpp_core(nb_dev, sb_dev); |
| rs780_gpp_sb_init(nb_dev, sb_dev, 8); |
| /* 5.10.8.4. set SB payload size: 64byte */ |
| set_pcie_enable_bits(nb_dev, 0x10 | PCIE_CORE_INDEX_GPPSB, 3 << 11, 2 << 11); |
| |
| /* Bus0Dev0Fun1Clock control init, we have to do it here, for dev0 Fun1 doesn't have a vendor or device ID */ |
| rs780_config_misc_clk(nb_dev); |
| |
| rs780_nb_pci_table(nb_dev); |
| break; |
| |
| case 1: /* bus0, dev1, APC. */ |
| printk(BIOS_INFO, "Bus-0, Dev-1, Fun-0.\n"); |
| rs780_nb_gfx_dev_table(nb_dev, dev); |
| break; |
| case 2: /* bus0, dev2,3, two GFX */ |
| case 3: |
| printk(BIOS_INFO, "Bus-0, Dev-2,3, Fun-0. enable=%d\n", dev->enabled); |
| set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind, |
| (dev->enabled ? 0 : 1) << dev_ind); |
| if (dev->enabled) |
| rs780_gfx_init(nb_dev, dev, dev_ind); |
| break; |
| case 4: /* bus0, dev4-7, four GPPSB */ |
| case 5: |
| case 6: |
| case 7: |
| printk(BIOS_INFO, "Bus-0, Dev-4,5,6,7, Fun-0. enable=%d\n", |
| dev->enabled); |
| set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << dev_ind, |
| (dev->enabled ? 0 : 1) << dev_ind); |
| if (dev->enabled) |
| rs780_gpp_sb_init(nb_dev, dev, dev_ind); |
| break; |
| case 8: /* bus0, dev8, SB */ |
| printk(BIOS_INFO, "Bus-0, Dev-8, Fun-0. enable=%d\n", dev->enabled); |
| set_nbmisc_enable_bits(nb_dev, 0x00, 1 << 6, |
| (dev->enabled ? 1 : 0) << 6); |
| if (dev->enabled) |
| rs780_gpp_sb_init(nb_dev, dev, dev_ind); |
| break; |
| case 9: /* bus 0, dev 9,10, GPP */ |
| case 10: |
| printk(BIOS_INFO, "Bus-0, Dev-9, 10, Fun-0. enable=%d\n", |
| dev->enabled); |
| set_nbmisc_enable_bits(nb_dev, 0x0c, 1 << (7 + dev_ind), |
| (dev->enabled ? 0 : 1) << (7 + dev_ind)); |
| if (dev->enabled) |
| rs780_gpp_sb_init(nb_dev, dev, dev_ind); |
| |
| if (dev_ind == 10) { |
| disable_pcie_bar3(nb_dev); |
| pcie_hide_unused_ports(nb_dev); |
| } |
| break; |
| default: |
| printk(BIOS_DEBUG, "unknown dev: %s\n", dev_path(dev)); |
| } |
| } |
| |
| #if !IS_ENABLED(CONFIG_AMD_SB_CIMX) |
| unsigned long acpi_fill_mcfg(unsigned long current) |
| { |
| /* FIXME |
| * Leave table blank until proper contents |
| * are determined. |
| */ |
| return current; |
| } |
| #endif |
| |
| struct chip_operations southbridge_amd_rs780_ops = { |
| CHIP_NAME("ATI RS780") |
| .enable_dev = rs780_enable, |
| }; |