| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include "rx6110sa.h" |
| |
| struct drivers_i2c_rx6110sa_config { |
| unsigned int bus_speed; /* Bus clock in Hz (default 400 kHz)*/ |
| /* The day (of the week) is indicated by 7 bits, bit 0 to bit 6. */ |
| unsigned char user_weekday; /* User day of the week to set */ |
| unsigned char user_day; /* User day to set */ |
| unsigned char user_month; /* User month to set */ |
| unsigned char user_year; /* User year to set */ |
| unsigned char set_user_date; /* Use user date from device tree */ |
| unsigned char cof_selection; /* Set up "clock out" frequency */ |
| unsigned char timer_clk; /* Set up timer clock */ |
| unsigned char timer_irq_en; /* Interrupt generation on timer */ |
| unsigned short timer_preset; /* Preset value for the timer */ |
| unsigned char timer_mode; /* Set the timer mode of operation */ |
| unsigned char timer_en; /* Enable timer operation */ |
| unsigned char irq_output_pin; /* 0: IRQ2 pin used, 1: IRQ1 pin used */ |
| unsigned char fout_output_pin; /* 0: IRQ2, 1: IRQ1, 2: DO/FOUT */ |
| unsigned char enable_1hz_out; /* If set enables 1 Hz output on IRQ1 */ |
| unsigned char pmon_sampling; /* Select power monitor sampling time */ |
| /* The following two bits set the power monitor and backup mode. */ |
| unsigned char bks_on; |
| unsigned char bks_off; |
| unsigned char iocut_en; /* Disable backup of I/O circuit. */ |
| }; |