| /* |
| * Copyright 2005 AMD |
| * by yinghai.lu@amd.com |
| */ |
| |
| #if USE_FALLBACK_IMAGE == 1 |
| |
| static void bcm5785_enable_rom(void) |
| { |
| unsigned char byte; |
| uint32_t dword; |
| uint16_t word; |
| device_t addr; |
| |
| /* Enable 4MB rom access at 0xFFC00000 - 0xFFFFFFFF */ |
| /* Locate the BCM 5785 SB PCI Main */ |
| addr = pci_locate_device(PCI_ID(0x1166, 0x0205), 0); // 0x0201? |
| |
| /* Set the 4MB enable bit bit */ |
| byte = pci_read_config8(addr, 0x41); |
| byte |= 0x0e; |
| pci_write_config8(addr, 0x41, byte); |
| } |
| |
| static void bcm5785_enable_lpc(void) |
| { |
| |
| uint8_t byte; |
| device_t dev; |
| |
| dev = pci_locate_device(PCI_ID(0x1166, 0x0234), 0); |
| |
| /* LPC Control 0 */ |
| byte = pci_read_config8(dev, 0x44); |
| /* Serial 0 */ |
| byte |= (1<<6); |
| pci_write_config8(dev, 0x44, byte); |
| |
| /* LPC Control 4 */ |
| byte = pci_read_config8(dev, 0x48); |
| /* superio port 0x2e/4e enable */ |
| byte |=(1<<1)|(1<<0); |
| pci_write_config8(dev, 0x48, byte); |
| } |
| #endif /* USE_FALLBACK_IMAGE == 1 */ |
| |
| |
| static void bcm5785_enable_wdt_port_cf9(void) |
| { |
| device_t dev; |
| uint32_t dword; |
| uint32_t dword_old; |
| |
| dev = pci_locate_device(PCI_ID(0x1166, 0x0205), 0); |
| |
| dword_old = pci_read_config32(dev, 0x4c); |
| dword = dword_old | (1<<4); //enable Timer Func |
| if(dword != dword_old ) { |
| pci_write_config32(dev, 0x4c, dword); |
| } |
| |
| dword_old = pci_read_config32(dev, 0x6c); |
| dword = dword_old | (1<<9); //unhide Timer Func in pci space |
| if(dword != dword_old ) { |
| pci_write_config32(dev, 0x6c, dword); |
| } |
| |
| dev = pci_locate_device(PCI_ID(0x1166, 0x0238), 0); |
| |
| /* enable cf9 */ |
| pci_write_config8(dev, 0x40, (1<<2)); |
| } |
| |
| static unsigned get_sbdn(unsigned bus) |
| { |
| device_t dev; |
| |
| /* Find the device. |
| * There can only be one 8111 on a hypertransport chain/bus. |
| */ |
| dev = pci_locate_device_on_bus( |
| PCI_ID(0x1166, 0x0036), |
| bus); |
| |
| return (dev>>15) & 0x1f; |
| |
| } |
| |
| #define SB_VFSMAF 0 |
| |
| static void enable_fid_change_on_sb(unsigned sbbusn, unsigned sbdn) |
| { |
| //ACPI Decode Enable |
| outb(0x0e, 0xcd6); |
| outb((1<<3), 0xcd7); |
| |
| // set port to 0x2060 |
| outb(0x67, 0xcd6); |
| outb(0x60, 0xcd7); |
| outb(0x68, 0xcd6); |
| outb(0x20, 0xcd7); |
| |
| outb(0x69, 0xcd6); |
| outb(7, 0xcd7); |
| |
| outb(0x64, 0xcd6); |
| outb(9, 0xcd7); |
| } |
| |
| static void ldtstop_sb(void) |
| { |
| outb(1, 0x2060); |
| } |
| |
| |
| static void hard_reset(void) |
| { |
| bcm5785_enable_wdt_port_cf9(); |
| |
| set_bios_reset(); |
| |
| /* full reset */ |
| outb(0x0a, 0x0cf9); |
| outb(0x0e, 0x0cf9); |
| } |
| |
| static void soft_reset(void) |
| { |
| bcm5785_enable_wdt_port_cf9(); |
| |
| set_bios_reset(); |
| #if 1 |
| /* link reset */ |
| // outb(0x02, 0x0cf9); |
| outb(0x06, 0x0cf9); |
| #endif |
| } |
| |
| |
| |
| static void bcm5785_enable_msg(void) |
| { |
| device_t dev; |
| uint32_t dword; |
| uint32_t dword_old; |
| uint8_t byte; |
| |
| dev = pci_locate_device(PCI_ID(0x1166, 0x0205), 0); |
| |
| byte = pci_read_config8(dev, 0x42); |
| byte = (1<<1); //enable a20 |
| pci_write_config8(dev, 0x42, byte); |
| |
| dword_old = pci_read_config32(dev, 0x6c); |
| // bit 5: enable A20 Message |
| // bit 4: enable interrupt messages |
| // bit 3: enable reset init message |
| // bit 2: enable keyboard init message |
| // bit 1: enable upsteam messages |
| // bit 0: enable shutdowm message to init generation |
| dword = dword_old | (1<<5) | (1<<3) | (1<<2) | (1<<1) | (1<<0); // bit 1 and bit 4 must be set, otherwise interrupt msg will not be delivered to the processor |
| if(dword != dword_old ) { |
| pci_write_config32(dev, 0x6c, dword); |
| } |
| |
| } |
| |
| static void bcm5785_early_setup(void) |
| { |
| uint8_t byte; |
| uint16_t word; |
| uint32_t dword; |
| device_t dev; |
| |
| //F0 |
| // enable device on bcm5785 at first |
| dev = pci_locate_device(PCI_ID(0x1166, 0x0205), 0); |
| dword = pci_read_config32(dev, 0x64); |
| dword |= (1<<15) | (1<<11) | (1<<3); // ioapci enable |
| dword |= (1<<8); // USB enable |
| dword |= /* (1<<27)|*/(1<<14); // IDE enable |
| pci_write_config32(dev, 0x64, dword); |
| |
| byte = pci_read_config8(dev, 0x84); |
| byte |= (1<<0); // SATA enable |
| pci_write_config8(dev, 0x84, byte); |
| |
| // wdt and cf9 for later in coreboot_ram to call hard_reset |
| bcm5785_enable_wdt_port_cf9(); |
| |
| bcm5785_enable_msg(); |
| |
| |
| #if 1 |
| // IDE related |
| //F0 |
| byte = pci_read_config8(dev, 0x4e); |
| byte |= (1<<4); //enable IDE ext regs |
| pci_write_config8(dev, 0x4e, byte); |
| |
| //F1 |
| dev = pci_locate_device(PCI_ID(0x1166, 0x0214), 0); |
| byte = pci_read_config8(dev, 0x48); |
| byte &= ~1; // disable pri channel |
| pci_write_config8(dev, 0x48, byte); |
| pci_write_config8(dev, 0xb0, 0x01); |
| pci_write_config8(dev, 0xb2, 0x02); |
| byte = pci_read_config8(dev, 0x06); |
| byte |= (1<<4); // so b0, b2 can not be changed from now |
| pci_write_config8(dev, 0x06, byte); |
| byte = pci_read_config8(dev, 0x49); |
| byte |= 1; // enable second channel |
| pci_write_config8(dev, 0x49, byte); |
| #endif |
| |
| //F2 |
| dev = pci_locate_device(PCI_ID(0x1166, 0x0234), 0); |
| |
| byte = pci_read_config8(dev, 0x40); |
| byte |= (1<<3)|(1<<2); // LPC Retry, LPC to PCI DMA enable |
| pci_write_config8(dev, 0x40, byte); |
| |
| pci_write_config32(dev, 0x60, 0x0000ffff); // LPC Memory hole start and end |
| |
| #if 1 |
| // USB related |
| pci_write_config8(dev, 0x90, 0x40); |
| pci_write_config8(dev, 0x92, 0x06); |
| pci_write_config8(dev, 0x9c, 0x7c); //PHY timinig register |
| pci_write_config8(dev, 0xa4, 0x02); //mask reg - low/full speed func |
| pci_write_config8(dev, 0xa5, 0x02); //mask reg - low/full speed func |
| pci_write_config8(dev, 0xa6, 0x00); //mask reg - high speed func |
| pci_write_config8(dev, 0xb4, 0x40); |
| #endif |
| } |