| |
| /** |
| * @file |
| * |
| * Config Southbridge SATA controller |
| * |
| * Init SATA features. |
| * |
| * @xrefitem bom "File Content Label" "Release Content" |
| * @e project: CIMx-SB |
| * @e sub-project: |
| * @e \$Revision:$ @e \$Date:$ |
| * |
| */ |
| /* |
| ***************************************************************************** |
| * |
| * Copyright (c) 2011, Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * *************************************************************************** |
| * |
| */ |
| |
| #include "SBPLATFORM.h" |
| #include "cbtypes.h" |
| |
| // |
| // Declaration of local functions |
| // |
| VOID sataSetIrqIntResource (IN AMDSBCFG* pConfig); |
| VOID sataBar5setting (IN AMDSBCFG* pConfig, IN UINT32 *pBar5); |
| VOID shutdownUnconnectedSataPortClock (IN AMDSBCFG* pConfig, IN UINT32 ddBar5); |
| VOID sataDriveDetection (IN AMDSBCFG* pConfig, IN UINT32 *pBar5); |
| |
| /** |
| * sataSetIrqIntResource - Config SATA IRQ/INT# resource |
| * |
| * |
| * - Private function |
| * |
| * @param[in] pConfig Southbridge configuration structure pointer. |
| * |
| */ |
| VOID |
| sataSetIrqIntResource ( |
| IN AMDSBCFG* pConfig |
| ) |
| { |
| UINT8 dbValue; |
| // IRQ14/IRQ15 come from IDE or SATA |
| dbValue = 0x08; |
| WriteIO (SB_IOMAP_REGC00, AccWidthUint8, &dbValue); |
| ReadIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); |
| dbValue = dbValue & 0x0F; |
| if (pConfig->SataClass == 3) { |
| dbValue = dbValue | 0x50; |
| } else { |
| if (pConfig->SataIdeMode == 1) { |
| // Both IDE & SATA set to Native mode |
| dbValue = dbValue | 0xF0; |
| } |
| } |
| WriteIO (SB_IOMAP_REGC01, AccWidthUint8, &dbValue); |
| } |
| |
| /** |
| * sataBar5setting - Config SATA BAR5 |
| * |
| * - Private function |
| * |
| * @param[in] pConfig - Southbridge configuration structure pointer. |
| * @param[in] *pBar5 - SATA BAR5 buffer. |
| * |
| */ |
| VOID |
| sataBar5setting ( |
| IN AMDSBCFG* pConfig, |
| IN UINT32 *pBar5 |
| ) |
| { |
| //Get BAR5 value |
| ReadPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, pBar5); |
| //Assign temporary BAR if is not already assigned |
| if ( (*pBar5 == 0) || (*pBar5 == - 1) ) { |
| //assign temporary BAR5 |
| if ( (pConfig->TempMMIO == 0) || (pConfig->TempMMIO == - 1) ) { |
| *pBar5 = 0xFEC01000; |
| } else { |
| *pBar5 = pConfig->TempMMIO; |
| } |
| WritePCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG24), AccWidthUint32, pBar5); |
| } |
| //Clear Bits 9:0 |
| *pBar5 = *pBar5 & 0xFFFFFC00; |
| } |
| /** |
| * shutdownUnconnectedSataPortClock - Shutdown unconnected Sata port clock |
| * |
| * - Private function |
| * |
| * @param[in] pConfig Southbridge configuration structure pointer. |
| * @param[in] ddBar5 Sata BAR5 base address. |
| * |
| */ |
| VOID |
| shutdownUnconnectedSataPortClock ( |
| IN AMDSBCFG* pConfig, |
| IN UINT32 ddBar5 |
| ) |
| { |
| UINT8 dbPortNum; |
| UINT8 dbPortSataStatus; |
| UINT8 NumOfPorts; |
| UINT8 cimSataClkAutoOff; |
| |
| cimSataClkAutoOff = (UINT8) pConfig->SataClkAutoOff; |
| #if SB_CIMx_PARAMETER == 0 |
| cimSataClkAutoOff = cimSataClkAutoOffDefault; |
| #endif |
| NumOfPorts = 0; |
| if ( cimSataClkAutoOff == TRUE ) { |
| for ( dbPortNum = 0; dbPortNum < 6; dbPortNum++ ) { |
| ReadMEM (ddBar5 + SB_SATA_BAR5_REG128 + (dbPortNum * 0x80), AccWidthUint8, &dbPortSataStatus); |
| // Shutdown the clock for the port and do the necessary port reporting changes. |
| // ?? Error port status should be 1 not 3 |
| if ( ((dbPortSataStatus & 0x0F) != 0x03) && (! ((pConfig->SataEspPort) & (1 << dbPortNum))) ) { |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8, 0xFF, (1 << dbPortNum)); |
| RWMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, ~(1 << dbPortNum), 00); |
| } |
| } //end of for (dbPortNum=0;dbPortNum<6;dbPortNum++) |
| ReadMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, &dbPortSataStatus); |
| //if all ports are in disabled state, report atleast one port |
| if ( (dbPortSataStatus & 0x3F) == 0) { |
| RWMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, (UINT32) ~(0x3F), 01); |
| } |
| ReadMEM (ddBar5 + SB_SATA_BAR5_REG0C, AccWidthUint8, &dbPortSataStatus); |
| for (dbPortNum = 0; dbPortNum < 6; dbPortNum ++) { |
| if (dbPortSataStatus & (1 << dbPortNum)) { |
| NumOfPorts++; |
| } |
| } |
| if ( NumOfPorts == 0) { |
| NumOfPorts = 0x01; |
| } |
| RWMEM (ddBar5 + SB_SATA_BAR5_REG00, AccWidthUint8, 0xE0, NumOfPorts - 1); |
| } //end of SataClkAuto Off option |
| } |
| |
| /** |
| * Table for class code of SATA Controller in different modes |
| * |
| * |
| * |
| * |
| */ |
| const static UINT32 sataIfCodeTable[] = |
| { |
| 0x01018F40, //sata class ID of IDE |
| 0x01040040, //sata class ID of RAID |
| 0x01060140, //sata class ID of AHCI |
| 0x01018A40, //sata class ID of Legacy IDE |
| 0x01018F40, //sata class ID of IDE to AHCI mode |
| }; |
| |
| /** |
| * Table for device id of SATA Controller in different modes |
| * |
| * |
| * |
| * |
| */ |
| const static UINT16 sataDeviceIDTable[] = |
| { |
| 0x4390, //sata device ID of IDE |
| 0x4392, //sata device ID of RAID |
| 0x4391, //sata class ID of AHCI |
| 0x4390, //sata device ID of Legacy IDE |
| 0x4390, //sata device ID of IDE->AHCI mode |
| }; |
| |
| /** |
| * Table for Sata Phy Fine Setting |
| * |
| * |
| * |
| * |
| */ |
| const static SATAPHYSETTING sataPhyTable[] = |
| { |
| {0x3006, 0x0056A607}, |
| {0x2006, 0x00061400}, |
| {0x1006, 0x00061302}, |
| |
| {0x3206, 0x0056A607}, |
| {0x2206, 0x00061400}, |
| {0x1206, 0x00061302}, |
| |
| {0x3406, 0x0056A607}, |
| {0x2406, 0x00061402}, |
| {0x1406, 0x00064300}, |
| |
| {0x3606, 0x0056A607}, |
| {0x2606, 0x00061402}, |
| {0x1606, 0x00064300}, |
| |
| {0x3806, 0x0056A700}, |
| {0x2806, 0x00061502}, |
| {0x1806, 0x00064302}, |
| |
| {0x3A06, 0x0056A700}, |
| {0x2A06, 0x00061502}, |
| {0x1A06, 0x00064302} |
| }; |
| |
| /** |
| * sataInitBeforePciEnum - Config SATA controller before PCI emulation |
| * |
| * |
| * |
| * @param[in] pConfig Southbridge configuration structure pointer. |
| * |
| */ |
| VOID |
| sataInitBeforePciEnum ( |
| IN AMDSBCFG* pConfig |
| ) |
| { |
| UINT32 ddTempVar; |
| UINT32 ddValue; |
| UINT32 *tempptr; |
| UINT16 *pDeviceIdptr; |
| UINT32 dwDeviceId; |
| UINT8 dbValue; |
| UINT8 pValue; |
| UINT16 i; |
| SATAPHYSETTING *pPhyTable; |
| |
| ddTempVar = 0; |
| // BIT0 Enable write access to PCI header (reg 08h-0Bh) by setting SATA PCI register 40h |
| // BIT4: Disable fast boot |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0 + BIT2 + BIT4); |
| // BIT0 Enable write access to PCI header (reg 08h-0Bh) by setting IDE PCI register 40h |
| RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0); |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8 | S3_SAVE, 0, pConfig->SataPortPower); |
| dbValue = (UINT8)pConfig->SataClass; |
| if (dbValue == AHCI_MODE_4394) { |
| dbValue = AHCI_MODE; |
| } |
| if (dbValue == IDE_TO_AHCI_MODE_4394) { |
| dbValue = IDE_TO_AHCI_MODE; |
| } |
| // Disable PATA MSI |
| RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG34), AccWidthUint8 | S3_SAVE, 0x00, 0x00); |
| RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG06), AccWidthUint8 | S3_SAVE, 0xEF, 0x00); |
| |
| // Get the appropriate class code from the table and write it to PCI register 08h-0Bh |
| // Set the appropriate SATA class based on the input parameters |
| // SATA IDE Controller Class ID & SSID |
| tempptr = (UINT32 *) FIXUP_PTR (&sataIfCodeTable[0]); |
| if ( (pConfig->SataIdeMode == 1) && (pConfig->SataClass != 3) ) { |
| ddValue = tempptr[0]; |
| // Write the class code to IDE PCI register 08h-0Bh |
| RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG08), AccWidthUint32 | S3_SAVE, 0, ddValue); |
| } |
| ddValue = tempptr[dbValue]; |
| // Write the class code to SATA PCI register 08h-0Bh |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG08), AccWidthUint32 | S3_SAVE, 0, ddValue); |
| if ( pConfig->SataClass == LEGACY_IDE_MODE ) { |
| //Set PATA controller to native mode |
| RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG09), AccWidthUint8 | S3_SAVE, 0x00, 0x08F); |
| } |
| if (pConfig->BuildParameters.IdeSsid != 0 ) { |
| RWPCI ((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG2C, AccWidthUint32 | S3_SAVE, 0x00, pConfig->BuildParameters.IdeSsid); |
| } |
| // SATA Controller Class ID & SSID |
| pDeviceIdptr = (UINT16 *) FIXUP_PTR (&sataDeviceIDTable[0]); |
| if ( pConfig->BuildParameters.SataIDESsid != 0 ) { |
| ddTempVar = pConfig->BuildParameters.SataIDESsid; |
| } |
| dwDeviceId = pDeviceIdptr[dbValue]; |
| if ( pConfig->SataClass == RAID_MODE) { |
| if ( pConfig->BuildParameters.SataRAID5Ssid != 0 ) { |
| ddTempVar = pConfig->BuildParameters.SataRAID5Ssid; |
| } |
| dwDeviceId = V_SB_SATA_RAID5_DID; |
| pValue = SATA_EFUSE_LOCATION; |
| getEfuseStatus (&pValue); |
| if (( pValue & SATA_EFUSE_BIT ) || ( pConfig->SataForceRaid == 1 )) { |
| dwDeviceId = V_SB_SATA_RAID_DID; |
| if ( pConfig->BuildParameters.SataRAIDSsid != 0 ) { |
| ddTempVar = pConfig->BuildParameters.SataRAIDSsid; |
| } |
| } |
| } |
| if ( ((pConfig->SataClass) == AHCI_MODE) || ((pConfig->SataClass) == IDE_TO_AHCI_MODE) || |
| ((pConfig->SataClass) == AHCI_MODE_4394) || ((pConfig->SataClass) == IDE_TO_AHCI_MODE_4394) ) { |
| if ( pConfig->BuildParameters.SataAHCISsid != 0 ) { |
| ddTempVar = pConfig->BuildParameters.SataAHCISsid; |
| } |
| } |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, dwDeviceId); |
| if ( ddTempVar != 0 ) { |
| RWPCI ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG2C, AccWidthUint32 | S3_SAVE, 0x00, ddTempVar); |
| } |
| // SATA IRQ Resource |
| sataSetIrqIntResource (pConfig); |
| |
| // 8.4 SATA PHY Programming Sequence |
| pPhyTable = (SATAPHYSETTING*)FIXUP_PTR (&sataPhyTable[0]); |
| for (i = 0; i < (sizeof (sataPhyTable) / sizeof (SATAPHYSETTING)); i++) { |
| RWPCI ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG84, AccWidthUint16 | S3_SAVE, ~(BIT1 + BIT2 + BIT9 + BIT10 + BIT11 + BIT12 + BIT13 + BIT14), pPhyTable->wPhyCoreControl); |
| RWPCI ((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG94, AccWidthUint32 | S3_SAVE, 0x00, pPhyTable->dwPhyFineTune); |
| ++pPhyTable; |
| } |
| |
| // CallBackToOEM (SATA_PHY_PROGRAMMING, NULL, pConfig); |
| |
| RWPCI (((IDE_BUS_DEV_FUN << 16) + SB_IDE_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0); |
| // Disable write access to PCI header |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0); |
| } |
| |
| /** |
| * sataInitAfterPciEnum - Config SATA controller after PCI emulation |
| * |
| * |
| * |
| * @param[in] pConfig Southbridge configuration structure pointer. |
| * |
| */ |
| VOID |
| sataInitAfterPciEnum ( |
| IN AMDSBCFG* pConfig |
| ) |
| { |
| UINT32 ddAndMask; |
| UINT32 ddOrMask; |
| UINT32 ddBar5; |
| UINT8 dbVar; |
| UINT8 dbPortNum; |
| UINT8 dbEfuse; |
| UINT8 dbPortMode; |
| UINT16 SataPortMode; |
| UINT8 cimSataAggrLinkPmCap; |
| UINT8 cimSataPortMultCap; |
| UINT8 cimSataPscCap; |
| UINT8 cimSataSscCap; |
| UINT8 cimSataFisBasedSwitching; |
| UINT8 cimSataCccSupport; |
| |
| cimSataAggrLinkPmCap = (UINT8) pConfig->SataAggrLinkPmCap; |
| cimSataPortMultCap = (UINT8) pConfig->SataPortMultCap; |
| cimSataPscCap = (UINT8) pConfig->SataPscCap; |
| cimSataSscCap = (UINT8) pConfig->SataSscCap; |
| cimSataFisBasedSwitching = (UINT8) pConfig->SataFisBasedSwitching; |
| cimSataCccSupport = (UINT8) pConfig->SataCccSupport; |
| |
| #if SB_CIMx_PARAMETER == 0 |
| cimSataAggrLinkPmCap = cimSataAggrLinkPmCapDefault; |
| cimSataPortMultCap = cimSataPortMultCapDefault; |
| cimSataPscCap = cimSataPscCapDefault; |
| cimSataSscCap = cimSataSscCapDefault; |
| cimSataFisBasedSwitching = cimSataFisBasedSwitchingDefault; |
| cimSataCccSupport = cimSataCccSupportDefault; |
| #endif |
| |
| ddAndMask = 0; |
| ddOrMask = 0; |
| ddBar5 = 0; |
| if ( pConfig->SATAMODE.SataMode.SataController == 0 ) { |
| return; //return if SATA controller is disabled. |
| } |
| |
| //Enable write access to pci header, pm capabilities |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xFF, BIT0); |
| //Disable AHCI Prefetch function |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 2), AccWidthUint8 | S3_SAVE, 0x7F, BIT7); |
| |
| sataBar5setting (pConfig, &ddBar5); |
| |
| ReadPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8,0xFF, 0x03); //memory and io access enable |
| dbEfuse = SATA_FIS_BASE_EFUSE_LOC; |
| getEfuseStatus (&dbEfuse); |
| |
| if ( !cimSataPortMultCap ) { |
| ddAndMask |= BIT12; |
| } |
| if ( cimSataAggrLinkPmCap ) { |
| ddOrMask |= BIT11; |
| } else { |
| ddAndMask |= BIT11; |
| } |
| if ( cimSataPscCap ) { |
| ddOrMask |= BIT1; |
| } |
| if ( cimSataSscCap ) { |
| ddOrMask |= BIT26; |
| } |
| if ( cimSataFisBasedSwitching ) { |
| if (dbEfuse & BIT1) { |
| ddAndMask |= BIT10; |
| } else { |
| ddOrMask |= BIT10; |
| } |
| } else { |
| ddAndMask |= BIT10; |
| } |
| // RPR 8.10 Disabling CCC (Command Completion Coalescing) support. |
| if ( cimSataCccSupport ) { |
| ddOrMask |= BIT19; |
| } else { |
| ddAndMask |= BIT19; |
| } |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REGFC), AccWidthUint32 | S3_SAVE, ~ddAndMask, ddOrMask); |
| |
| |
| // SATA ESP port setting |
| // These config bits are set for SATA driver to identify which ports are external SATA ports and need to |
| // support hotplug. If a port is set as an external SATA port and need to support hotplug, then driver will |
| // not enable power management (HIPM & DIPM) for these ports. |
| if ( pConfig->SataEspPort != 0 ) { |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(pConfig->SataEspPort), 0); |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT12 + BIT13 + BIT14 + BIT15 + BIT16 + BIT17 + BIT5 + BIT4 + BIT3 + BIT2 + BIT1 + BIT0), (pConfig->SataEspPort << 12)); |
| // RPR 8.7 External SATA Port Indication Registers |
| // If any of the ports was programmed as an external port, HCAP.SXS should also be set |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REGFC), AccWidthUint32 | S3_SAVE, ~(BIT20), BIT20); |
| } else { |
| // RPR 8.7 External SATA Port Indication Registers |
| // If any of the ports was programmed as an external port, HCAP.SXS should also be set (Clear for no ESP port) |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT5 + BIT4 + BIT3 + BIT2 + BIT1 + BIT0), 0x00); |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REGFC), AccWidthUint32 | S3_SAVE, ~(BIT20), 0x00); |
| } |
| if ( cimSataFisBasedSwitching ) { |
| if (dbEfuse & BIT1) { |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27), 0x00); |
| } else { |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27), (BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27)); |
| } |
| } else { |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REGF8), AccWidthUint32 | S3_SAVE, ~(BIT22 + BIT23 + BIT24 + BIT25 + BIT26 + BIT27), 0x00); |
| } |
| |
| // Disabled SATA MSI and D3 Power State capability |
| // RPR 8.13 SATA MSI and D3 Power State Capability |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG34), AccWidthUint8 | S3_SAVE, 0, 0x70); |
| |
| if (((pConfig->SataClass) != NATIVE_IDE_MODE) && ((pConfig->SataClass) != LEGACY_IDE_MODE)) { |
| // RAID or AHCI |
| if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == SATA_IDE_COMBINE_DISABLE) { |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REG00), AccWidthUint8 | S3_SAVE, ~(BIT2 + BIT1 + BIT0), BIT2 + BIT0); |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REG0C), AccWidthUint8 | S3_SAVE, 0xC0, 0x3F); |
| // RPR 8.10 Disabling CCC (Command Completion Coalescing) support. |
| // 8 messages |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG50 + 2), AccWidthUint8, ~(BIT3 + BIT2 + BIT1), BIT2 + BIT1); |
| } else { |
| // RPR 8.10 Disabling CCC (Command Completion Coalescing) support. |
| if ( pConfig->SataCccSupport ) { |
| // 8 messages |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG50 + 2), AccWidthUint8, ~(BIT3 + BIT2 + BIT1), BIT2 + BIT1); |
| } else { |
| // 4 messages |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG50 + 2), AccWidthUint8, ~(BIT3 + BIT2 + BIT1), BIT2); |
| } |
| } |
| } |
| |
| if ( pConfig->BIOSOSHandoff == 1 ) { |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REG24), AccWidthUint8 | S3_SAVE, ~BIT0, BIT0); |
| } else { |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REG24), AccWidthUint8 | S3_SAVE, ~BIT0, 0x00); |
| } |
| |
| SataPortMode = (UINT16)pConfig->SataPortMode; |
| dbPortNum = 0; |
| while ( dbPortNum < 6 ) { |
| dbPortMode = (UINT8) (SataPortMode & 3); |
| if ( (dbPortMode == BIT0) || (dbPortMode == BIT1) ) { |
| if ( dbPortMode == BIT0 ) { |
| // set GEN 1 |
| RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0x0F, 0x10); |
| } |
| if ( dbPortMode == BIT1 ) { |
| // set GEN2 (default is GEN3) |
| RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0x0F, 0x20); |
| } |
| RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFF, 0x01); |
| } |
| SataPortMode >>= 2; |
| dbPortNum ++; |
| } |
| SbStall (1000); |
| SataPortMode = (UINT16)pConfig->SataPortMode; |
| dbPortNum = 0; |
| while ( dbPortNum < 6 ) { |
| dbPortMode = (UINT8) (SataPortMode & 3); |
| if ( (dbPortMode == BIT0) || (dbPortMode == BIT1) ) { |
| RWMEM (ddBar5 + SB_SATA_BAR5_REG12C + dbPortNum * 0x80, AccWidthUint8, 0xFE, 0x00); |
| } |
| dbPortNum ++; |
| SataPortMode >>= 2; |
| } |
| WritePCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); |
| //Disable write access to pci header, pm capabilities |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0); |
| } |
| |
| |
| /** |
| * sataInitMidPost - Config SATA controller in Middle POST. |
| * |
| * |
| * |
| * @param[in] pConfig Southbridge configuration structure pointer. |
| * |
| */ |
| VOID |
| sataInitMidPost ( |
| IN AMDSBCFG* pConfig |
| ) |
| { |
| UINT32 ddBar5; |
| sataBar5setting (pConfig, &ddBar5); |
| //If this is not S3 resume and also if SATA set to one of IDE mode, then implement drive detection workaround. |
| if ( ! (pConfig->S3Resume) && ( ((pConfig->SataClass) != AHCI_MODE) && ((pConfig->SataClass) != RAID_MODE) ) ) { |
| sataDriveDetection (pConfig, &ddBar5); |
| } |
| } |
| |
| /** |
| * sataDriveDetection - Sata drive detection |
| * |
| * |
| * @param[in] pConfig Southbridge configuration structure pointer. |
| * @param[in] *pBar5 Sata BAR5 base address. |
| * |
| */ |
| VOID |
| sataDriveDetection ( |
| IN AMDSBCFG* pConfig, |
| IN UINT32 *pBar5 |
| ) |
| { |
| UINT32 ddVar0; |
| UINT8 dbPortNum; |
| UINT8 dbVar0; |
| UINT16 dwIoBase; |
| UINT32 dwVar0; |
| if ( (pConfig->SataClass == NATIVE_IDE_MODE) || (pConfig->SataClass == LEGACY_IDE_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE) ) { |
| for ( dbPortNum = 0; dbPortNum < 4; dbPortNum++ ) { |
| ReadMEM (*pBar5 + SB_SATA_BAR5_REG128 + dbPortNum * 0x80, AccWidthUint32, &ddVar0); |
| if ( ( ddVar0 & 0x0F ) == 0x03 ) { |
| if ( dbPortNum & BIT0 ) { |
| //this port belongs to secondary channel |
| ReadPCI (((UINT32) (SATA_BUS_DEV_FUN << 16) + SB_SATA_REG18), AccWidthUint16, &dwIoBase); |
| } else { |
| //this port belongs to primary channel |
| ReadPCI (((UINT32) (SATA_BUS_DEV_FUN << 16) + SB_SATA_REG10), AccWidthUint16, &dwIoBase); |
| } |
| //if legacy ide mode, then the bar registers don't contain the correct values. So we need to hardcode them |
| if ( pConfig->SataClass == LEGACY_IDE_MODE ) { |
| dwIoBase = ( (0x170) | ((UINT16) ( (~((UINT8) (dbPortNum & BIT0) << 7)) & 0x80 )) ); |
| } |
| if ( dbPortNum & BIT1 ) { |
| //this port is slave |
| dbVar0 = 0xB0; |
| } else { |
| //this port is master |
| dbVar0 = 0xA0; |
| } |
| dwIoBase &= 0xFFF8; |
| WriteIO (dwIoBase + 6, AccWidthUint8, &dbVar0); |
| //Wait in loop for 30s for the drive to become ready |
| for ( dwVar0 = 0; dwVar0 < 300000; dwVar0++ ) { |
| ReadIO (dwIoBase + 7, AccWidthUint8, &dbVar0); |
| if ( (dbVar0 & 0x88) == 0 ) { |
| break; |
| } |
| SbStall (100); |
| } |
| } //end of if ( ( ddVar0 & 0x0F ) == 0x03) |
| } //for (dbPortNum = 0; dbPortNum < 4; dbPortNum++) |
| } //if ( (pConfig->SataClass == NATIVE_IDE_MODE) || (pConfig->SataClass == LEGACY_IDE_MODE) || (pConfig->SataClass == IDE_TO_AHCI_MODE)) |
| } |
| |
| /** |
| * sataInitLatePost - Prepare SATA controller to boot to OS. |
| * |
| * - Set class ID to AHCI (if set to AHCI * Mode) |
| * - Enable AHCI interrupt |
| * |
| * @param[in] pConfig Southbridge configuration structure pointer. |
| * |
| */ |
| VOID |
| sataInitLatePost ( |
| IN AMDSBCFG* pConfig |
| ) |
| { |
| UINT32 ddBar5; |
| UINT8 dbVar; |
| UINT8 dbPortNum; |
| |
| //Return immediately is sata controller is not enabled |
| if ( pConfig->SATAMODE.SataMode.SataController == 0 ) { |
| return; |
| } |
| //Enable write access to pci header, pm capabilities |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, 0xff, BIT0); |
| |
| // if ((pConfig->SATAMODE.SataMode.SataIdeCombinedMode) == SATA_IDE_COMBINE_DISABLE) { |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40 + 1), AccWidthUint8 | S3_SAVE, ~BIT7, BIT7); |
| // } |
| sataBar5setting (pConfig, &ddBar5); |
| |
| ReadPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar); |
| //Enable memory and io access |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, 0xFF, 0x03); |
| |
| shutdownUnconnectedSataPortClock (pConfig, ddBar5); |
| |
| if (( pConfig->SataClass == IDE_TO_AHCI_MODE) || ( pConfig->SataClass == IDE_TO_AHCI_MODE_4394 )) { |
| //program the AHCI class code |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG08), AccWidthUint32 | S3_SAVE, 0, 0x01060100); |
| //Set interrupt enable bit |
| RWMEM ((ddBar5 + 0x04), AccWidthUint8, (UINT32)~0, BIT1); |
| //program the correct device id for AHCI mode |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, 0x4391); |
| } |
| |
| if (( pConfig->SataClass == AHCI_MODE_4394 ) || ( pConfig->SataClass == IDE_TO_AHCI_MODE_4394 )) { |
| //program the correct device id for AHCI 4394 mode |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG02), AccWidthUint16 | S3_SAVE, 0, 0x4394); |
| } |
| |
| //Clear error status ?? only 4 port |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REG130), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REG1B0), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REG230), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REG2B0), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REG330), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); |
| RWMEM ((ddBar5 + SB_SATA_BAR5_REG3B0), AccWidthUint32 | S3_SAVE, 0xFFFFFFFF, 0xFFFFFFFF); |
| //Restore memory and io access bits |
| WritePCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG04), AccWidthUint8, &dbVar ); |
| //Disable write access to pci header and pm capabilities |
| RWPCI (((SATA_BUS_DEV_FUN << 16) + SB_SATA_REG40), AccWidthUint8 | S3_SAVE, ~BIT0, 0); |
| for ( dbPortNum = 0; dbPortNum < 6; dbPortNum++ ) { |
| RWMEM ((ddBar5 + 0x110 + (dbPortNum * 0x80)), AccWidthUint32, 0xFFFFFFFF, 0x00); |
| } |
| } |
| |
| |