| /* $NoKeywords:$ */ |
| /** |
| * @file |
| * |
| * Agesa structures and definitions |
| * |
| * Contains AMD AGESA core interface |
| * |
| * @xrefitem bom "File Content Label" "Release Content" |
| * @e project: AGESA |
| * @e sub-project: Include |
| * @e \$Revision: 85818 $ @e \$Date: 2013-01-11 17:04:21 -0600 (Fri, 11 Jan 2013) $ |
| */ |
| /***************************************************************************** |
| * |
| * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Advanced Micro Devices, Inc. nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| ***************************************************************************/ |
| |
| |
| #ifndef _AGESA_H_ |
| #define _AGESA_H_ |
| |
| #include "Porting.h" |
| #include "AMD.h" |
| |
| // |
| // |
| // AGESA Types and Definitions |
| // |
| // |
| |
| // AGESA BASIC CALLOUTS |
| #define AGESA_MEM_RELEASE 0x00028000ul |
| |
| // AGESA ADVANCED CALLOUTS, Processor |
| #define AGESA_CHECK_UMA 0x00028100ul |
| #define AGESA_DO_RESET 0x00028101ul |
| #define AGESA_ALLOCATE_BUFFER 0x00028102ul |
| #define AGESA_DEALLOCATE_BUFFER 0x00028103ul |
| #define AGESA_LOCATE_BUFFER 0x00028104ul |
| #define AGESA_RUNFUNC_ONAP 0x00028105ul |
| |
| // AGESA ADVANCED CALLOUTS, HyperTransport |
| |
| // AGESA ADVANCED CALLOUTS, Memory |
| #define AGESA_READ_SPD 0x00028140ul |
| #define AGESA_HOOKBEFORE_DRAM_INIT 0x00028141ul |
| #define AGESA_HOOKBEFORE_DQS_TRAINING 0x00028142ul |
| #define AGESA_READ_SPD_RECOVERY 0x00028143ul |
| #define AGESA_HOOKBEFORE_EXIT_SELF_REF 0x00028144ul |
| #define AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY 0x00028145ul |
| #define AGESA_EXTERNAL_VOLTAGE_ADJUST 0x00028147ul |
| |
| // AGESA IDS CALLOUTS |
| #define AGESA_GET_IDS_INIT_DATA 0x00028200ul |
| |
| // AGESA GNB CALLOUTS |
| #define AGESA_GNB_PCIE_SLOT_RESET 0x00028301ul |
| #define AGESA_GNB_GFX_GET_VBIOS_IMAGE 0x00028302ul |
| |
| // AGESA FCH CALLOUTS |
| #define AGESA_FCH_OEM_CALLOUT 0x00028401ul |
| |
| //------------------------------------------------------------------------ |
| // |
| // HyperTransport Interface |
| |
| |
| |
| //----------------------------------------------------------------------------- |
| // HT DEFINITIONS AND MACROS |
| // |
| //----------------------------------------------------------------------------- |
| |
| |
| // Width equates for call backs |
| #define HT_WIDTH_8_BITS 8 ///< Specifies 8 bit, or up to 8 bit widths. |
| #define HT_WIDTH_16_BITS 16 ///< Specifies 16 bit, or up to 16 bit widths. |
| #define HT_WIDTH_4_BITS 4 |
| #define HT_WIDTH_2_BITS 2 |
| #define HT_WIDTH_NO_LIMIT HT_WIDTH_16_BITS |
| |
| // Frequency Limit equates for call backs which take a frequency supported mask. |
| #define HT_FREQUENCY_LIMIT_200M 1 ///< Specifies a limit of no more than 200 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_400M 7 ///< Specifies a limit of no more than 400 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_600M 0x1F ///< Specifies a limit of no more than 600 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_800M 0x3F ///< Specifies a limit of no more than 800 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_1000M 0x7F ///< Specifies a limit of no more than 1000 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_HT1_ONLY 0x7F ///< Specifies a limit of no more than 1000 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_1200M 0xFF ///< Specifies a limit of no more than 1200 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_1400M 0x1FF ///< Specifies a limit of no more than 1400 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_1600M 0x3FF ///< Specifies a limit of no more than 1600 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_1800M 0x7FF ///< Specifies a limit of no more than 1800 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_2000M 0xFFF ///< Specifies a limit of no more than 2000 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_2200M 0x1FFF ///< Specifies a limit of no more than 2200 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_2400M 0x3FFF ///< Specifies a limit of no more than 2400 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_2600M 0x7FFF ///< Specifies a limit of no more than 2600 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_2800M 0x27FFFul ///< Specifies a limit of no more than 2800 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_3000M 0x67FFFul ///< Specifies a limit of no more than 3000 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_3200M 0xE7FFFul ///< Specifies a limit of no more than 3200 MHz HT frequency. |
| #define HT_FREQUENCY_LIMIT_3600M 0x1E7FFFul |
| #define HT_FREQUENCY_LIMIT_MAX HT_FREQUENCY_LIMIT_3600M |
| #define HT_FREQUENCY_NO_LIMIT 0xFFFFFFFFul ///< Specifies a no limit of HT frequency. |
| |
| // Unit ID Clumping special values |
| #define HT_CLUMPING_DISABLE 0x00000000ul |
| #define HT_CLUMPING_NO_LIMIT 0xFFFFFFFFul |
| |
| #define HT_LIST_TERMINAL 0xFF ///< End of list. |
| #define HT_LIST_MATCH_ANY 0xFE ///< Match Any value, used for Sockets, Links, IO Chain Depth. |
| #define HT_LIST_MATCH_INTERNAL_LINK 0xFD ///< Match all of the internal links. |
| |
| // Event Notify definitions |
| |
| // Event definitions. |
| |
| // Coherent subfunction events |
| #define HT_EVENT_COH_EVENTS 0x10001000ul |
| #define HT_EVENT_COH_NO_TOPOLOGY 0x10011000ul ///< See ::HT_EVENT_DATA_COH_NO_TOPOLOGY. |
| #define HT_EVENT_COH_OBSOLETE000 0x10021000ul // No longer used. |
| #define HT_EVENT_COH_PROCESSOR_TYPE_MIX 0x10031000ul ///< See ::HT_EVENT_DATA_COH_PROCESSOR_TYPE_MIX. |
| #define HT_EVENT_COH_NODE_DISCOVERED 0x10041000ul ///< See ::HT_EVENT_COH_NODE_DISCOVERED. |
| #define HT_EVENT_COH_MPCAP_MISMATCH 0x10051000ul ///< See ::HT_EVENT_COH_MPCAP_MISMATCH. |
| |
| // Non-coherent subfunction events |
| #define HT_EVENT_NCOH_EVENTS 0x10002000ul |
| #define HT_EVENT_NCOH_BUID_EXCEED 0x10012000ul ///< See ::HT_EVENT_DATA_NCOH_BUID_EXCEED |
| #define HT_EVENT_NCOH_OBSOLETE000 0x10022000ul // No longer used. |
| #define HT_EVENT_NCOH_BUS_MAX_EXCEED 0x10032000ul ///< See ::HT_EVENT_DATA_NCOH_BUS_MAX_EXCEED. |
| #define HT_EVENT_NCOH_CFG_MAP_EXCEED 0x10042000ul ///< See ::HT_EVENT_DATA_NCOH_CFG_MAP_EXCEED. |
| #define HT_EVENT_NCOH_DEVICE_FAILED 0x10052000ul ///< See ::HT_EVENT_DATA_NCOH_DEVICE_FAILED |
| #define HT_EVENT_NCOH_AUTO_DEPTH 0x10062000ul ///< See ::HT_EVENT_NCOH_AUTO_DEPTH |
| |
| // Optimization subfunction events |
| #define HT_EVENT_OPT_EVENTS 0x10003000ul |
| #define HT_EVENT_OPT_REQUIRED_CAP_RETRY 0x10013000ul ///< See ::HT_EVENT_DATA_OPT_REQUIRED_CAP. |
| #define HT_EVENT_OPT_REQUIRED_CAP_GEN3 0x10023000ul ///< See ::HT_EVENT_DATA_OPT_REQUIRED_CAP. |
| #define HT_EVENT_OPT_UNUSED_LINKS 0x10033000ul ///< See ::HT_EVENT_DATA_OPT_UNUSED_LINKS. |
| #define HT_EVENT_OPT_LINK_PAIR_EXCEED 0x10043000ul ///< See ::HT_EVENT_DATA_OPT_LINK_PAIR_EXCEED. |
| |
| // HW Fault events |
| #define HT_EVENT_HW_EVENTS 0x10004000ul |
| #define HT_EVENT_HW_SYNCFLOOD 0x10014000ul ///< See ::HT_EVENT_DATA_HW_SYNCFLOOD. |
| #define HT_EVENT_HW_HTCRC 0x10024000ul ///< See ::HT_EVENT_DATA_HW_HT_CRC. |
| |
| // The Recovery HT component uses 0x10005000 for events. |
| // For consistency, we avoid that range here. |
| |
| #define HT_MAX_NC_BUIDS 32 |
| //---------------------------------------------------------------------------- |
| // HT TYPEDEFS, STRUCTURES, ENUMS |
| // |
| //---------------------------------------------------------------------------- |
| |
| /// Specify the state redundant links are to be left in after match. |
| /// |
| /// After matching a link for IGNORE_LINK or SKIP_REGANG, the link may be left alone, |
| /// or powered off. |
| |
| typedef enum { |
| MATCHED, ///< The link matches the requested customization. |
| ///< When used with IGNORE_LINK, |
| ///< this will generally require other software to initialize the link. |
| ///< When used with SKIP_REGANG, |
| ///< the two unganged links will be available for distribution. |
| |
| POWERED_OFF, ///< Power the link off. Support may vary based on processor model. |
| ///< Power Off is only supported for coherent links. |
| ///< Link power off may occur at a warm reset rather than immediately. |
| ///< When used with SKIP_REGANG, the paired sublink is powered off, not the matching link. |
| |
| UNMATCHED, ///< The link should be processed according to normal defaults. |
| ///< Effectively, the link does not match the requested customization. |
| ///< This can be used to exclude links from a following match any. |
| |
| MaxFinalLinkState ///< Not a final link state, use for limit checking. |
| } FINAL_LINK_STATE; |
| |
| /// Swap a device from its current id to a new one. |
| |
| typedef struct { |
| IN UINT8 FromId; ///< The device responding to FromId, |
| IN UINT8 ToId; ///< will be moved to ToId. |
| } BUID_SWAP_ITEM; |
| |
| |
| /// Each Non-coherent chain may have a list of device swaps. After performing the swaps, |
| /// the final in order list of device ids is provided. (There can be more swaps than devices.) |
| /// The unused entries in both are filled with 0xFF. |
| |
| typedef struct { |
| IN BUID_SWAP_ITEM Swaps[HT_MAX_NC_BUIDS]; ///< The BUID Swaps to perform |
| IN UINT8 FinalIds[HT_MAX_NC_BUIDS]; ///< The ordered final BUIDs, resulting from the swaps |
| } BUID_SWAP_LIST; |
| |
| |
| /// Control Manual Initialization of Non-Coherent Chains |
| /// |
| /// This interface is checked every time a non-coherent chain is |
| /// processed. BUID assignment may be controlled explicitly on a |
| /// non-coherent chain. Provide a swap list. Swaps controls the |
| /// BUID assignment and FinalIds provides the device to device |
| /// Linking. Device orientation can be detected automatically, or |
| /// explicitly. See interface documentation for more details. |
| /// |
| /// If a manual swap list is not supplied, |
| /// automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially |
| /// based on each device's unit count. |
| |
| typedef struct { |
| // Match fields |
| IN UINT8 Socket; ///< The Socket on which this chain is located |
| IN UINT8 Link; ///< The Link on the host for this chain |
| // Override fields |
| IN BUID_SWAP_LIST SwapList; ///< The swap list |
| } MANUAL_BUID_SWAP_LIST; |
| |
| |
| /// Override options for DEVICE_CAP_OVERRIDE. |
| /// |
| /// Specify which override actions should be performed. For Checks, 1 means to check the item |
| /// and 0 means to skip the check. For the override options, 1 means to apply the override and |
| /// 0 means to ignore the override. |
| |
| typedef struct { |
| IN UINT32 IsCheckDevVenId:1; ///< Check Match on Device/Vendor id |
| IN UINT32 IsCheckRevision:1; ///< Check Match on device Revision |
| IN UINT32 IsOverrideWidthIn:1; ///< Override Width In |
| IN UINT32 IsOverrideWidthOut:1; ///< Override Width Out |
| IN UINT32 IsOverrideFreq:1; ///< Override Frequency |
| IN UINT32 IsOverrideClumping:1; ///< Override Clumping |
| IN UINT32 IsDoCallout:1; ///< Make the optional callout |
| } DEVICE_CAP_OVERRIDE_OPTIONS; |
| |
| /// Override capabilities of a device. |
| /// |
| /// This interface is checked once for every Link on every IO device. |
| /// Provide the width and frequency capability if needed for this device. |
| /// This is used along with device capabilities, the limit interfaces, and northbridge |
| /// limits to compute the default settings. The components of the device's PCI config |
| /// address are provided, so its settings can be consulted if need be. |
| /// The optional callout is a catch all. |
| |
| typedef struct { |
| // Match fields |
| IN UINT8 HostSocket; ///< The Socket on which this chain is located. |
| IN UINT8 HostLink; ///< The Link on the host for this chain. |
| IN UINT8 Depth; ///< The Depth in the I/O chain from the Host. |
| IN UINT32 DevVenId; ///< The Device's PCI Vendor + Device ID (offset 0x00). |
| IN UINT8 Revision; ///< The Device's PCI Revision field (offset 0x08). |
| IN UINT8 Link; ///< The Device's Link number (0 or 1). |
| IN DEVICE_CAP_OVERRIDE_OPTIONS Options; ///< The options for this device override. |
| // Override fields |
| IN UINT8 LinkWidthIn; ///< modify to change the Link Width In. |
| IN UINT8 LinkWidthOut; ///< modify to change the Link Width Out. |
| IN UINT32 FreqCap; ///< modify to change the Link's frequency capability. |
| IN UINT32 Clumping; ///< modify to change Unit ID clumping support. |
| IN CALLOUT_ENTRY Callout; ///< optional call for really complex cases, or NULL. |
| } DEVICE_CAP_OVERRIDE; |
| |
| /// Callout param struct for override capabilities of a device. |
| /// |
| /// If the optional callout is implemented this param struct is passed to it. |
| |
| typedef struct { |
| IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| // Match fields |
| IN UINT8 HostSocket; ///< The Socket on which this chain is located. |
| IN UINT8 HostLink; ///< The Link on the host for this chain. |
| IN UINT8 Depth; ///< The Depth in the I/O chain from the Host. |
| IN UINT32 DevVenId; ///< The Device's PCI Vendor + Device ID (offset 0x00). |
| IN UINT8 Revision; ///< The Device's PCI Revision field (offset 0x08). |
| IN UINT8 Link; ///< The Device's Link number (0 or 1). |
| IN PCI_ADDR PciAddress; ///< The Device's PCI Address. |
| // Override fields |
| OUT UINT8 *LinkWidthIn; ///< modify to change the Link Width In. |
| OUT UINT8 *LinkWidthOut; ///< modify to change the Link Width Out. |
| OUT UINT32 *FreqCap; ///< modify to change the Link's frequency capability. |
| OUT UINT32 *Clumping; ///< modify to change Unit ID clumping support. |
| } DEVICE_CAP_CALLOUT_PARAMS; |
| |
| /// Limits for CPU to CPU Links. |
| /// |
| /// For each coherent connection this interface is checked once. |
| /// Provide the frequency and width if needed for this Link (usually based on board |
| /// restriction). This is used with CPU device capabilities and northbridge limits |
| /// to compute the default settings. |
| |
| typedef struct { |
| // Match fields |
| IN UINT8 SocketA; ///< One Socket on which this Link is located |
| IN UINT8 LinkA; ///< The Link on this Node |
| IN UINT8 SocketB; ///< The other Socket on which this Link is located |
| IN UINT8 LinkB; ///< The Link on that Node |
| // Limit fields |
| IN UINT8 ABLinkWidthLimit; ///< modify to change the Link Width A->B |
| IN UINT8 BALinkWidthLimit; ///< modify to change the Link Width B-<A |
| IN UINT32 PcbFreqCap; ///< modify to change the Link's frequency capability |
| } CPU_TO_CPU_PCB_LIMITS; |
| |
| /// Get limits for non-coherent Links. |
| /// |
| /// For each non-coherent connection this interface is checked once. |
| /// Provide the frequency and width if needed for this Link (usually based on board |
| /// restriction). This is used with device capabilities, device overrides, and northbridge limits |
| /// to compute the default settings. |
| /// |
| typedef struct { |
| // Match fields |
| IN UINT8 HostSocket; ///< The Socket on which this Link is located |
| IN UINT8 HostLink; ///< The Link about to be initialized |
| IN UINT8 Depth; ///< The Depth in the I/O chain from the Host |
| // Limit fields |
| IN UINT8 DownstreamLinkWidthLimit; ///< modify to change the Link Width going away from processor |
| IN UINT8 UpstreamLinkWidthLimit; ///< modify to change the Link Width moving toward processor |
| IN UINT32 PcbFreqCap; ///< modify to change the Link's frequency capability |
| } IO_PCB_LIMITS; |
| |
| /// Manually control bus number assignment. |
| /// |
| /// This interface is checked every time a non-coherent chain is processed. |
| /// If a system can not use the auto Bus numbering feature for non-coherent chain bus |
| /// assignments, this interface can provide explicit control. For each chain, provide |
| /// the bus number range to use. |
| |
| typedef struct { |
| // Match fields |
| IN UINT8 Socket; ///< The Socket on which this chain is located |
| IN UINT8 Link; ///< The Link on the host for this chain |
| // Override fields |
| IN UINT8 SecBus; ///< Secondary Bus number for this non-coherent chain |
| IN UINT8 SubBus; ///< Subordinate Bus number |
| } OVERRIDE_BUS_NUMBERS; |
| |
| |
| /// Ignore a Link. |
| /// |
| /// This interface is checked every time a coherent Link is found and then every |
| /// time a non-coherent Link from a CPU is found. |
| /// Any coherent or non-coherent Link from a CPU can be ignored and not used |
| /// for discovery or initialization. Useful for connection based systems. |
| /// (Note: not checked for IO device to IO Device Links.) |
| /// (Note: not usable for internal links (MCM processors).) |
| |
| typedef struct { |
| // Match fields |
| IN UINT8 Socket; ///< The Socket on which this Link is located |
| IN UINT8 Link; ///< The Link about to be initialized |
| // Customization fields |
| IN FINAL_LINK_STATE LinkState; ///< The link may be left unitialized, or powered off. |
| } IGNORE_LINK; |
| |
| |
| /// Skip reganging of subLinks. |
| /// |
| /// This interface is checked whenever two subLinks are both connected to the same CPUs. |
| /// Normally, unganged sublinks between the same two CPUs are reganged. |
| /// Provide a matching structure to leave the Links unganged. |
| |
| typedef struct { |
| // Match fields |
| IN UINT8 SocketA; ///< One Socket on which this Link is located |
| IN UINT8 LinkA; ///< The Link on this Node |
| IN UINT8 SocketB; ///< The other Socket on which this Link is located |
| IN UINT8 LinkB; ///< The Link on that Node |
| // Customization fields |
| IN FINAL_LINK_STATE LinkState; ///< The paired sublink may be active, or powered off. |
| } SKIP_REGANG; |
| |
| /// The System Socket layout, which sockets are physically connected. |
| /// |
| /// The hardware method for Socket naming is preferred. Use this software method only |
| /// if required. |
| |
| typedef struct { |
| IN UINT8 CurrentSocket; ///< The socket from which this connection originates. |
| IN UINT8 CurrentLink; ///< The Link from the source socket connects to another socket. |
| IN UINT8 TargetSocket; ///< The target socket which is connected on that link. |
| } SYSTEM_PHYSICAL_SOCKET_MAP; |
| |
| //---------------------------------------------------------------------------- |
| /// |
| /// This is the input structure for AmdHtInitialize. |
| /// |
| typedef struct { |
| // Basic level customization |
| IN UINT8 AutoBusStart; ///< For automatic bus number assignment, starting bus number - usually zero. |
| ///< @BldCfgItem{BLDCFG_STARTING_BUSNUM} |
| IN UINT8 AutoBusMax; ///< For automatic bus number assignment, do not assign above max. |
| ///< @BldCfgItem{BLDCFG_MAXIMUM_BUSNUM} |
| IN UINT8 AutoBusIncrement; ///< For automatic bus number assignment, each chain gets this many busses. |
| ///< @BldCfgItem{BLDCFG_ALLOCATED_BUSNUM} |
| |
| // Advanced Level Customization |
| IN MANUAL_BUID_SWAP_LIST *ManualBuidSwapList; ///< Provide Manual Swap List, if any. |
| ///< @BldCfgItem{BLDCFG_BUID_SWAP_LIST} |
| IN DEVICE_CAP_OVERRIDE *DeviceCapOverrideList; ///< Provide Device Overrides, if any. |
| ///< @BldCfgItem{BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST} |
| IN CPU_TO_CPU_PCB_LIMITS *CpuToCpuPcbLimitsList; ///< Provide CPU PCB Limits, if any. |
| ///< @BldCfgItem{BLDCFG_HTFABRIC_LIMITS_LIST}. |
| ///< @n @e Examples: See @ref FrequencyLimitExamples "Frequency Limit Examples". |
| IN IO_PCB_LIMITS *IoPcbLimitsList; ///< Provide IO PCB Limits, if any. |
| ///< @BldCfgItem{BLDCFG_HTCHAIN_LIMITS_LIST}. |
| ///< @n @e Examples: See @ref FrequencyLimitExamples "Frequency Limit Examples". |
| IN OVERRIDE_BUS_NUMBERS *OverrideBusNumbersList; ///< Provide manual Bus Number assignment, if any. |
| ///< Use either auto bus numbering or override bus |
| ///< numbers, not both. |
| ///< @BldCfgItem{BLDCFG_BUS_NUMBERS_LIST} |
| |
| IN IGNORE_LINK *IgnoreLinkList; ///< Provide links to ignore, if any. |
| ///< @BldCfgItem{BLDCFG_IGNORE_LINK_LIST} |
| IN SKIP_REGANG *SkipRegangList; ///< Provide links to remain unganged, if any. |
| ///< @BldCfgItem{BLDCFG_LINK_SKIP_REGANG_LIST} |
| ///< @n @e Examples: See @ref PerfPerWattHt "Performance-per-watt Optimization". |
| |
| // Expert Level Customization |
| IN UINT8 **Topolist; ///< Use this topology list in addition to the built in, if not NULL. |
| ///< @BldCfgItem{BLDCFG_ADDITIONAL_TOPOLOGIES_LIST} |
| IN SYSTEM_PHYSICAL_SOCKET_MAP *SystemPhysicalSocketMap; |
| ///< The hardware socket naming method is preferred, |
| ///< If it can't be used, this provides a software method. |
| ///< @BldCfgItem{BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP} |
| } AMD_HT_INTERFACE; |
| |
| //----------------------------------------------------------------------------- |
| // |
| // HT Recovery Interface |
| // |
| |
| |
| /*----------------------------------------------------------------------------- |
| * HT Recovery DEFINITIONS AND MACROS |
| * |
| *----------------------------------------------------------------------------- |
| */ |
| |
| // BBHT subfunction events |
| #define HT_EVENT_BB_EVENTS 0x10005000ul |
| #define HT_EVENT_BB_BUID_EXCEED 0x10015000ul |
| #define HT_EVENT_BB_DEVICE_FAILED 0x10055000ul |
| #define HT_EVENT_BB_AUTO_DEPTH 0x10065000ul |
| |
| /*---------------------------------------------------------------------------- |
| * HT Recovery TYPEDEFS, STRUCTURES, ENUMS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| |
| /// The Interface structure to Recovery HT. |
| |
| typedef struct { |
| IN MANUAL_BUID_SWAP_LIST *ManualBuidSwapList; ///< Option to manually control SB link init |
| ///< @BldCfgItem{BLDCFG_BUID_SWAP_LIST} |
| OUT UINT32 Depth; ///< If auto init was used this is set to the depth of the chain, |
| ///< else, for manual init unmodified. |
| } AMD_HT_RESET_INTERFACE; |
| |
| |
| //----------------------------------------------------------------------------- |
| // FCH DEFINITIONS AND MACROS |
| // |
| //----------------------------------------------------------------------------- |
| |
| /// Configuration values for SdConfig |
| typedef enum { |
| SdDisable = 0, ///< Disabled |
| SdAmda, ///< AMDA, set 24,18,16, default |
| SdDma, ///< DMA clear 24, 16, set 18 |
| SdPio ///< PIO clear 24,18,16 |
| } SD_MODE; |
| |
| /// Configuration values for SdClockControl |
| typedef enum { |
| Sd50MhzTraceCableLengthWithinSixInches = 4, ///< 50Mhz, default |
| Sd40MhzTraceCableLengthSix2ElevenInches = 6, ///< 40Mhz |
| Sd25MhzTraceCableLengthEleven2TwentyfourInches = 7, ///< 25Mhz |
| } SD_CLOCK_CONTROL; |
| |
| /// Configuration values for IrConfig |
| typedef enum { |
| IrDisable = 0, ///< Disable |
| IrRxTx0 = 1, ///< Rx and Tx0 |
| IrRxTx1 = 2, ///< Rx and Tx1 |
| IrRxTx0Tx1 = 3 ///< Rx and both Tx0,Tx1 |
| } IR_CONFIG; |
| |
| /// Configuration values for SataClass |
| typedef enum { |
| SataNativeIde = 0, ///< Native IDE mode |
| SataRaid, ///< RAID mode |
| SataAhci, ///< AHCI mode |
| SataLegacyIde, ///< Legacy IDE mode |
| SataIde2Ahci, ///< IDE->AHCI mode |
| SataAhci7804, ///< AHCI mode as 7804 ID (AMD driver) |
| SataIde2Ahci7804 ///< IDE->AHCI mode as 7804 ID (AMD driver) |
| } SATA_CLASS; |
| |
| /// Configuration values for BLDCFG_FCH_GPP_LINK_CONFIG |
| typedef enum { |
| PortA4 = 0, ///< 4:0:0:0 |
| PortA2B2 = 2, ///< 2:2:0:0 |
| PortA2B1C1 = 3, ///< 2:1:1:0 |
| PortA1B1C1D1 = 4 ///< 1:1:1:1 |
| } GPP_LINKMODE; |
| |
| /// Configuration values for FchPowerFail |
| typedef enum { |
| AlwaysOff = 0, ///< Always power off after power resumes |
| AlwaysOn = 1, ///< Always power on after power resumes |
| UsePrevious = 3, ///< Resume to same setting when power fails |
| } POWER_FAIL; |
| |
| |
| /// Configuration values for SATA Link Speed |
| typedef enum { |
| Gen1 = 1, ///< SATA port GEN1 speed |
| Gen2 = 2, ///< SATA port GEN2 speed |
| Gen3 = 3, ///< SATA port GEN3 speed |
| } SATA_SPEED; |
| |
| |
| /// Configuration values for GPIO function |
| typedef enum { |
| Function0 = 0, ///< GPIO Function 1 |
| Function1 = 1, ///< GPIO Function 1 |
| Function2 = 2, ///< GPIO Function 2 |
| Function3 = 3, ///< GPIO Function 3 |
| } GPIO_FUN; |
| |
| |
| /// Configuration values for GPIO_CFG |
| typedef enum { |
| OwnedByEc = 1 << 0, ///< This bit can only be written by EC |
| OwnedByHost = 1 << 1, ///< This bit can only be written by host (BIOS) |
| Sticky = 1 << 2, ///< If set, [6:3] are sticky |
| PullUpB = 1 << 3, ///< 0: Pullup enable; 1: Pullup disabled |
| PullDown = 1 << 4, ///< 0: Pulldown disabled; 1: Pulldown enable |
| GpioOutEnB = 1 << 5, ///< 0: Output enable; 1: Output disable |
| GpioOut = 1 << 6, ///< Output state when GpioOutEnB is 0 |
| GpioIn = 1 << 7, ///< This bit is read only - current pin state |
| } CFG_BYTE; |
| |
| /// FCH GPIO CONTROL |
| typedef struct { |
| IN UINT8 GpioPin; ///< Gpio Pin, valid range: 0-67, 128-150, 160-228 |
| IN GPIO_FUN PinFunction; ///< Multi-function selection |
| IN CFG_BYTE CfgByte; ///< GPIO Register value |
| } GPIO_CONTROL; |
| |
| /// |
| /// FCH SCI MAP CONTROL |
| /// |
| typedef struct { |
| IN UINT8 InputPin; ///< Input Pin, valid range 0-63 |
| IN UINT8 GpeMap; ///< Gpe Map, valid range 0-31 |
| } SCI_MAP_CONTROL; |
| |
| /// |
| /// FCH SATA PHY CONTROL |
| /// |
| typedef struct { |
| IN BOOLEAN CommonPhy; ///< Common PHY or not |
| ///< @li <b>FALSE</b> - Only applied to specified port |
| ///< @li <b>TRUE</b> - Apply to all SATA ports |
| IN SATA_SPEED Gen; ///< SATA speed |
| IN UINT8 Port; ///< Port number, valid range: 0-7 |
| IN UINT32 PhyData; ///< SATA PHY data, valid range: 0-0xFFFFFFFF |
| } SATA_PHY_CONTROL; |
| |
| /// |
| /// FCH Component Data Structure in InitReset stage |
| /// |
| typedef struct { |
| IN BOOLEAN UmiGen2; ///< Enable Gen2 data rate of UMI |
| ///< @li <b>FALSE</b> - Disable Gen2 |
| ///< @li <b>TRUE</b> - Enable Gen2 |
| |
| IN BOOLEAN SataEnable; ///< SATA controller function |
| ///< @li <b>FALSE</b> - SATA controller is disabled |
| ///< @li <b>TRUE</b> - SATA controller is enabled |
| |
| IN BOOLEAN IdeEnable; ///< SATA IDE controller mode enabled/disabled |
| ///< @li <b>FALSE</b> - IDE controller is disabled |
| ///< @li <b>TRUE</b> - IDE controller is enabled |
| |
| IN BOOLEAN GppEnable; ///< Master switch of GPP function |
| ///< @li <b>FALSE</b> - GPP disabled |
| ///< @li <b>TRUE</b> - GPP enabled |
| |
| IN BOOLEAN Xhci0Enable; ///< XHCI0 controller function |
| ///< @li <b>FALSE</b> - XHCI0 controller disabled |
| ///< @li <b>TRUE</b> - XHCI0 controller enabled |
| |
| IN BOOLEAN Xhci1Enable; ///< XHCI1 controller function |
| ///< @li <b>FALSE</b> - XHCI1 controller disabled |
| ///< @li <b>TRUE</b> - XHCI1 controller enabled |
| } FCH_RESET_INTERFACE; |
| |
| |
| /// |
| /// FCH Component Data Structure from InitEnv stage |
| /// |
| typedef struct { |
| IN SD_MODE SdConfig; ///< Secure Digital (SD) controller mode |
| IN UINT8 AzaliaController; |
| |
| IN IR_CONFIG IrConfig; ///< Infrared (IR) Configuration |
| IN BOOLEAN UmiGen2; ///< Enable Gen2 data rate of UMI |
| ///< @li <b>FALSE</b> - Disable Gen2 |
| ///< @li <b>TRUE</b> - Enable Gen2 |
| |
| IN SATA_CLASS SataClass; ///< SATA controller mode |
| IN BOOLEAN SataEnable; ///< SATA controller function |
| ///< @li <b>FALSE</b> - SATA controller is disabled |
| ///< @li <b>TRUE</b> - SATA controller is enabled |
| |
| IN BOOLEAN IdeEnable; ///< SATA IDE controller mode enabled/disabled |
| ///< @li <b>FALSE</b> - IDE controller is disabled |
| ///< @li <b>TRUE</b> - IDE controller is enabled |
| |
| IN BOOLEAN SataIdeMode; ///< Native mode of SATA IDE controller |
| ///< @li <b>FALSE</b> - Legacy IDE mode |
| ///< @li <b>TRUE</b> - Native IDE mode |
| |
| IN BOOLEAN Ohci1Enable; ///< OHCI controller #1 Function |
| ///< @li <b>FALSE</b> - OHCI1 is disabled |
| ///< @li <b>TRUE</b> - OHCI1 is enabled |
| |
| IN BOOLEAN Ohci2Enable; ///< OHCI controller #2 Function |
| ///< @li <b>FALSE</b> - OHCI2 is disabled |
| ///< @li <b>TRUE</b> - OHCI2 is enabled |
| |
| IN BOOLEAN Ohci3Enable; ///< OHCI controller #3 Function |
| ///< @li <b>FALSE</b> - OHCI3 is disabled |
| ///< @li <b>TRUE</b> - OHCI3 is enabled |
| |
| IN BOOLEAN Ohci4Enable; ///< OHCI controller #4 Function |
| ///< @li <b>FALSE</b> - OHCI4 is disabled |
| ///< @li <b>TRUE</b> - OHCI4 is enabled |
| |
| IN BOOLEAN XhciSwitch; ///< XHCI controller Function |
| ///< @li <b>FALSE</b> - XHCI is disabled |
| ///< @li <b>TRUE</b> - XHCI is enabled |
| |
| IN BOOLEAN GppEnable; ///< Master switch of GPP function |
| ///< @li <b>FALSE</b> - GPP disabled |
| ///< @li <b>TRUE</b> - GPP enabled |
| |
| IN POWER_FAIL FchPowerFail; ///< FCH power failure option |
| } FCH_INTERFACE; |
| |
| |
| /*---------------------------------------------------------------------------- |
| * CPU Feature related info |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /// Build Configuration values for BLDCFG_PLATFORM_C1E_MODE |
| typedef enum { |
| C1eModeDisabled = 0, ///< Disabled |
| C1eModeAuto = 1, ///< Auto mode enables the best C1e method for the |
| ///< currently installed processor |
| C1eModeHardware = 2, ///< Hardware method |
| C1eModeMsgBased = 3, ///< Message-based method |
| C1eModeSoftwareDeprecated = 4, ///< Deprecated software SMI method. |
| ///< Refer to "Addendum\Examples\C1eSMMHandler.asm" for |
| ///< example host BIOS SMM Handler implementation |
| C1eModeHardwareSoftwareDeprecated = 5, ///< Hardware or deprecated software SMI method |
| MaxC1eMode = 6 ///< Not a valid value, used for verifying input |
| } PLATFORM_C1E_MODES; |
| |
| /// Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE |
| typedef enum { |
| CStateModeDisabled = 0, ///< Disabled |
| CStateModeC6 = 1, ///< C6 State |
| MaxCStateMode = 2 ///< Not a valid value, used for verifying input |
| } PLATFORM_CSTATE_MODES; |
| |
| /// Build Configuration values for BLDCFG_PLATFORM_CPB_MODE |
| typedef enum { |
| CpbModeAuto = 0, ///< Auto |
| CpbModeDisabled = 1, ///< Disabled |
| MaxCpbMode = 2 ///< Not a valid value, used for verifying input |
| } PLATFORM_CPB_MODES; |
| |
| /// Build Configuration values for BLDCFG_LOW_POWER_PSTATE_FOR_PROCHOT_MODE |
| typedef enum { |
| LOW_POWER_PSTATE_FOR_PROCHOT_AUTO = 0, ///< Auto |
| LOW_POWER_PSTATE_FOR_PROCHOT_DISABLE = 1, ///< Disabled |
| MAX_LOW_POWER_PSTATE_FOR_PROCHOT_MODE = 2 ///< Not a valid value, used for verifying input |
| } PLATFORM_LOW_POWER_PSTATE_MODES; |
| |
| /// Build Configuration values for BLDCFG_ACPI_PSTATES_PSD_POLICY |
| #define PsdPolicyProcessorDefault 0 ///< PSD is dependent or independent per processor default |
| #define PsdPolicyDependent 1 ///< PSD is forced dependent |
| #define PsdPolicyIndependent 2 ///< PSD is forced independent |
| #define PsdPolicyMax 3 ///< Not a valid value, used for verifying input |
| |
| /*---------------------------------------------------------------------------- |
| * GNB PCIe configuration info |
| *---------------------------------------------------------------------------- |
| */ |
| |
| // Event definitions |
| |
| #define GNB_EVENT_INVALID_CONFIGURATION 0x20010000ul // User configuration invalid |
| #define GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION 0x20010001ul // Requested lane allocation for PCIe port can not be supported |
| #define GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION 0x20010002ul // Requested incorrect PCIe port device address |
| #define GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION 0x20010003ul // Incorrect parameter in DDI link configuration |
| #define GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION 0x20010004ul // Invalid with for PCIe port or DDI link |
| #define GNB_EVENT_INVALID_LANES_CONFIGURATION 0x20010005ul // Lane double subscribe lanes |
| #define GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION 0x20010006ul // Requested lane allocation for DDI link(s) can not be supported |
| #define GNB_EVENT_LINK_TRAINING_FAIL 0x20020000ul // PCIe Link training fail |
| #define GNB_EVENT_BROKEN_LANE_RECOVERY 0x20030000ul // Broken lane workaround applied to recover link training |
| #define GNB_EVENT_GEN2_SUPPORT_RECOVERY 0x20040000ul // Scale back to GEN1 to recover link training |
| |
| |
| #define DESCRIPTOR_TERMINATE_LIST 0x80000000ull |
| #define DESCRIPTOR_IGNORE 0x40000000ull |
| |
| /// PCIe link initialization |
| typedef enum { |
| EndpointDetect = 0, ///< Detect endpoint presence |
| EndpointNotPresent ///< Endpoint not present (or connected). Used in case there is alternative way to determine |
| ///< if device present on board or in slot. For example GPIO can be used to determine device presence. |
| } PCIE_ENDPOINT_STATUS; |
| |
| |
| /// PCIe port misc extended controls |
| typedef struct { |
| IN UINT8 LinkComplianceMode :1; ///< Force port into compliance mode (device will not be trained, port output compliance pattern) |
| IN UINT8 LinkSafeMode :2; /**< Safe mode PCIe capability. (Parameter may limit PCIe speed requested through PCIe_PORT_DATA::LinkSpeedCapability) |
| * @li @b 0 - port can advertize muximum supported capability |
| * @li @b 1 - port limit advertized capability and speed to PCIe Gen1 |
| */ |
| IN UINT8 SbLink :1; /**< PCIe link type |
| * @li @b 0 - General purpose port |
| * @li @b 1 - Port connected to SB |
| */ |
| IN UINT8 ClkPmSupport :1; /**< Clock Power Management Support |
| * @li @b 0 - Clock Power Management not configured |
| * @li @b 1 - Clock Power Management configured according to PCIe device capability |
| */ |
| } PCIe_PORT_MISC_CONTROL; |
| |
| /// The IO APIC Interrupt Mapping Info |
| typedef struct { |
| IN UINT8 GroupMap; /**< Group mapping for slot or endpoint device (connected to PCIE port) interrupts . |
| * @li <b>0</b> - IGNORE THIS STRUCTURE AND USE RECOMMENDED SETTINGS |
| * @li <b>1</b> - mapped to Grp 0 (Interrupts 0..3 of IO APIC redirection table) |
| * @li <b>2</b> - mapped to Grp 1 (Interrupts 4..7 of IO APIC redirection table) |
| * @li ... |
| * @li <b>8</b> - mapped to Grp 7 (Interrupts 28..31 of IO APIC redirection table) |
| */ |
| IN UINT8 Swizzle; /**< Swizzle interrupt in the Group. |
| * @li <b>0</b> - ABCD |
| * @li <b>1</b> - BCDA |
| * @li <b>2</b> - CDAB |
| * @li <b>3</b> - DABC |
| */ |
| IN UINT8 BridgeInt; /**< IOAPIC redirection table entry for PCIE bridge interrupt |
| * @li <b>0</b> - Entry 0 of IO APIC redirection table |
| * @li <b>1</b> - Entry 1 of IO APIC redirection table |
| * @li ... |
| * @li <b>31</b> - Entry 31 of IO APIC redirection table |
| */ |
| } APIC_DEVICE_INFO; |
| |
| /// PCIe port configuration data |
| typedef struct { |
| IN UINT8 PortPresent; ///< Enable PCIe port for initialization. |
| IN UINT8 ChannelType; /**< Channel type. |
| * @li @b 0 - "lowLoss", |
| * @li @b 1 - "highLoss", |
| * @li @b 2 - "mob0db", |
| * @li @b 3 - "mob3db", |
| * @li @b 4 - "extnd6db" |
| * @li @b 5 - "extnd8db" |
| */ |
| IN UINT8 DeviceNumber; /**< PCI Device number for port. |
| * @li @b 0 - Native port device number |
| * @li @b N - Port device number (See available configurations @ref F12LaneConfigurations "Family 0x12", @ref F14ONLaneConfigurations "Family 0x14(ON)") |
| */ |
| IN UINT8 FunctionNumber; ///< Reserved for future use |
| IN UINT8 LinkSpeedCapability; /**< PCIe link speed/ |
| * @li @b 0 - Maximum supported by silicon |
| * @li @b 1 - Gen1 |
| * @li @b 2 - Gen2 |
| * @li @b 3 - Gen3 |
| */ |
| IN UINT8 LinkAspm; /**< ASPM control. (see AgesaPcieLinkAspm for additional option to control ASPM) |
| * @li @b 0 - Disabled |
| * @li @b 1 - L0s only |
| * @li @b 2 - L1 only |
| * @li @b 3 - L0s and L1 |
| */ |
| IN UINT8 LinkHotplug; /**< Hotplug control. |
| * @li @b 0 - Disabled |
| * @li @b 1 - Basic |
| * @li @b 2 - Server |
| * @li @b 3 - Enhanced |
| */ |
| IN UINT8 ResetId; /**< Arbitrary number greater than 0 assigned by platform firmware for GPIO |
| * identification which control reset for given port. |
| * Each port with unique GPIO should have unique ResetId assigned. |
| * All ports use same GPIO to control reset should have same ResetId assigned. |
| * see AgesaPcieSlotResetContol. |
| */ |
| IN PCIe_PORT_MISC_CONTROL MiscControls; ///< Misc extended controls |
| IN APIC_DEVICE_INFO ApicDeviceInfo; ///< IOAPIC device programming info |
| IN PCIE_ENDPOINT_STATUS EndpointStatus; ///< PCIe endpoint (device connected to PCIe port) status |
| } PCIe_PORT_DATA; |
| |
| /// DDI channel lane mapping |
| typedef struct { ///< Structure that discribe lane mapping |
| IN UINT8 Lane0 :2; /**< Lane 0 mapping |
| * @li @b 0 - Map to lane 0 |
| * @li @b 1 - Map to lane 1 |
| * @li @b 2 - Map to lane 2 |
| * @li @b 2 - Map to lane 3 |
| */ |
| IN UINT8 Lane1 :2; ///< Lane 1 mapping (see "Lane 0 mapping") |
| IN UINT8 Lane2 :2; ///< Lane 2 mapping (see "Lane 0 mapping") |
| IN UINT8 Lane3 :2; ///< Lane 3 mapping (see "Lane 0 mapping") |
| } CHANNEL_MAPPING; ///< Lane mapping |
| |
| /// Common Channel Mapping |
| typedef union { |
| IN UINT8 ChannelMappingValue; ///< Raw lane mapping |
| IN CHANNEL_MAPPING ChannelMapping; ///< Channel mapping |
| } CONN_CHANNEL_MAPPING; |
| |
| /// DDI Configuration data |
| typedef struct { |
| IN UINT8 ConnectorType; /**< Display Connector Type |
| * @li @b 0 - DP |
| * @li @b 1 - eDP |
| * @li @b 2 - Single Link DVI-D |
| * @li @b 3 - Dual Link DVI-D |
| * @li @b 4 - HDMI |
| * @li @b 5 - DP-to-VGA |
| * @li @b 6 - DP-to-LVDS |
| * @li @b 8 - Single Link DVI-I |
| * @li @b 9 - Native CRT (Family 0x14) |
| * @li @b 10 - Native LVDS (Family 0x14) |
| * @li @b 11 - Auto detect LCD panel connector type. VBIOS is able to auto detect the LVDS connector type: native LVDS, eDP or DP-to-LVDS |
| * The auto detection method only support panel with EDID. |
| */ |
| IN UINT8 AuxIndex; /**< Indicates which AUX or DDC Line is used |
| * @li @b 0 - AUX1 |
| * @li @b 1 - AUX2 |
| * @li @b 2 - AUX3 |
| * @li @b 3 - AUX4 |
| * @li @b 4 - AUX5 |
| * @li @b 5 - AUX6 |
| */ |
| IN UINT8 HdpIndex; /**< Indicates which HDP pin is used |
| * @li @b 0 - HDP1 |
| * @li @b 1 - HDP2 |
| * @li @b 2 - HDP3 |
| * @li @b 3 - HDP4 |
| * @li @b 4 - HDP5 |
| * @li @b 5 - HDP6 |
| */ |
| IN CONN_CHANNEL_MAPPING Mapping[2]; /**< Set specific mapping of lanes to connector pins |
| * @li Mapping[0] define mapping for group of 4 lanes starting at PCIe_ENGINE_DATA.StartLane |
| * @li Mapping[1] define mapping for group of 4 lanes ending at PCIe_ENGINE_DATA.EndLane (only applicable for Dual DDI link) |
| * if Mapping[x] set to 0 than default mapping assumed |
| */ |
| IN UINT8 LanePnInversionMask; /**< Specifies whether to invert the state of P and N for each lane. Each bit represents a PCIe lane on the DDI port. |
| * @li 0 - Do not invert (default) |
| * @li 1 - Invert P and N on this lane |
| */ |
| IN UINT8 Flags; /**< Capabilities flags |
| * @li Flags bit[0] DDI_DATA_FLAGS_DP1_1_ONLY Selects downgrade PHY link to DP1.1 |
| * @li Flags bit[7:1] Reserved |
| */ |
| } PCIe_DDI_DATA; |
| |
| /// Engine Configuration |
| typedef struct { |
| IN UINT8 EngineType; /**< Engine type |
| * @li @b 0 - Ignore engine configuration |
| * @li @b 1 - PCIe port |
| * @li @b 2 - DDI |
| */ |
| IN UINT16 StartLane; /**< Start Lane ID (in reversed configuration StartLane > EndLane) |
| * See lane description for @ref F12PcieLaneDescription "Family 0x12" |
| * @ref F14ONPcieLaneDescription "Family 0x14(ON)". |
| * See lane configurations for @ref F12LaneConfigurations "Family 0x12" |
| * @ref F14ONLaneConfigurations "Family 0x14(ON)". |
| */ |
| IN UINT16 EndLane; /**< End lane ID (in reversed configuration StartLane > EndLane) |
| * See lane description for @ref F12PcieLaneDescription "Family 0x12", |
| * @ref F14ONPcieLaneDescription "Family 0x14(ON)". |
| * See lane configurations for @ref F12LaneConfigurations "Family 0x12" |
| * @ref F14ONLaneConfigurations "Family 0x14(ON)". |
| */ |
| |
| } PCIe_ENGINE_DATA; |
| |
| /// PCIe port descriptor |
| typedef struct { |
| IN UINT32 Flags; /**< Descriptor flags |
| * @li @b Bit31 - last descriptor in complex |
| */ |
| IN PCIe_ENGINE_DATA EngineData; ///< Engine data |
| IN PCIe_PORT_DATA Port; ///< PCIe port specific configuration info |
| } PCIe_PORT_DESCRIPTOR; |
| |
| /// DDI descriptor |
| typedef struct { |
| IN UINT32 Flags; /**< Descriptor flags |
| * @li @b Bit31 - last descriptor in complex |
| */ |
| IN PCIe_ENGINE_DATA EngineData; ///< Engine data |
| IN PCIe_DDI_DATA Ddi; ///< DDI port specific configuration info |
| } PCIe_DDI_DESCRIPTOR; |
| |
| /// PCIe Complex descriptor |
| typedef struct { |
| IN UINT32 Flags; /**< Descriptor flags |
| * @li @b Bit31 - last descriptor in topology |
| */ |
| IN UINT32 SocketId; ///< Socket Id |
| IN CONST PCIe_PORT_DESCRIPTOR *PciePortList; ///< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). |
| IN CONST PCIe_DDI_DESCRIPTOR *DdiLinkList; ///< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). |
| IN VOID *Reserved; ///< Reserved for future use |
| } PCIe_COMPLEX_DESCRIPTOR; |
| |
| /// Action to control PCIe slot reset |
| typedef enum { |
| AssertSlotReset, ///< Assert slot reset |
| DeassertSlotReset ///< Deassert slot reset |
| } PCIE_RESET_CONTROL; |
| |
| ///Slot Reset Info |
| typedef struct { |
| IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN UINT8 ResetId; ///< Slot reset ID as specified in PCIe_PORT_DESCRIPTOR |
| IN UINT8 ResetControl; ///< Reset control as in PCIE_RESET_CONTROL |
| } PCIe_SLOT_RESET_INFO; |
| |
| #define GFX_VBIOS_IMAGE_FLAG_SPECIAL_POST 0x1 |
| |
| ///VBIOS image info |
| typedef struct { |
| IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| OUT VOID *ImagePtr; ///< Pointer to VBIOS image |
| IN PCI_ADDR GfxPciAddress; ///< PCI address of integrated graphics controller |
| IN UINT32 Flags; ///< BIT[0] - special repost requred |
| } GFX_VBIOS_IMAGE_INFO; |
| |
| /// Engine descriptor type |
| typedef enum { |
| PcieUnusedEngine = 0, ///< Unused descriptor |
| PciePortEngine = 1, ///< PCIe port |
| PcieDdiEngine = 2, ///< DDI |
| MaxPcieEngine ///< Max engine type for boundary check. |
| } PCIE_ENGINE_TYPE; |
| |
| /// PCIe link capability/speed |
| typedef enum { |
| PcieGenMaxSupported, ///< Maximum supported |
| PcieGen1 = 1, ///< Gen1 |
| PcieGen2, ///< Gen2 |
| PcieGen3, ///< Gen3 |
| MaxPcieGen ///< Max Gen for boundary check |
| } PCIE_LINK_SPEED_CAP; |
| |
| /// PCIe PSPP Power policy |
| typedef enum { |
| PsppDisabled, ///< PSPP disabled |
| PsppPerformance = 1, ///< Performance |
| PsppBalanceHigh, ///< Balance-High |
| PsppBalanceLow, ///< Balance-Low |
| PsppPowerSaving, ///< Power Saving |
| MaxPspp ///< Max Pspp for boundary check |
| } PCIE_PSPP_POLICY; |
| |
| /// DDI display connector type |
| typedef enum { |
| ConnectorTypeDP, ///< DP |
| ConnectorTypeEDP, ///< eDP |
| ConnectorTypeSingleLinkDVI, ///< Single Link DVI-D |
| ConnectorTypeDualLinkDVI, ///< Dual Link DVI-D |
| ConnectorTypeHDMI, ///< HDMI |
| ConnectorTypeDpToVga, ///< DP-to-VGA |
| ConnectorTypeDpToLvds, ///< DP-to-LVDS |
| ConnectorTypeStub, |
| ConnectorTypeSingleLinkDviI, ///< Single Link DVI-I |
| ConnectorTypeCrt, ///< CRT (VGA) |
| ConnectorTypeLvds, ///< LVDS |
| ConnectorTypeEDPToLvds, ///< 3rd party common eDP-to-LVDS translator chip without AMD SW init |
| ConnectorTypeEDPToLvdsSwInit, ///< 3rd party eDP-to-LVDS translator which requires AMD SW init |
| ConnectorTypeAutoDetect, ///< VBIOS auto detect connector type (native LVDS, eDP or DP-to-LVDS) |
| MaxConnectorType ///< Not valid value, used to verify input |
| } PCIE_CONNECTOR_TYPE; |
| |
| /// PCIe link channel type |
| typedef enum { |
| ChannelTypeLowLoss, ///< Low Loss |
| ChannelTypeHighLoss, ///< High Loss |
| ChannelTypeMob0db, ///< Mobile 0dB |
| ChannelTypeMob3db, ///< Mobile 3dB |
| ChannelTypeExt6db, ///< Extended 6dB |
| ChannelTypeExt8db, ///< Extended 8dB |
| MaxChannelType ///< Not valid value, used to verify input |
| } PCIE_CHANNEL_TYPE; |
| |
| /// PCIe link ASPM |
| typedef enum { |
| AspmDisabled, ///< Disabled |
| AspmL0s, ///< PCIe L0s link state |
| AspmL1, ///< PCIe L1 link state |
| AspmL0sL1, ///< PCIe L0s & L1 link state |
| MaxAspm ///< Not valid value, used to verify input |
| } PCIE_ASPM_TYPE; |
| |
| /// PCIe link hotplug support |
| typedef enum { |
| HotplugDisabled, ///< Hotplug disable |
| HotplugBasic, ///< Basic Hotplug |
| HotplugServer, ///< Server Hotplug |
| HotplugEnhanced, ///< Enhanced |
| HotplugInboard, ///< Inboard |
| MaxHotplug ///< Not valid value, used to verify input |
| } PCIE_HOTPLUG_TYPE; |
| |
| /// PCIe link initialization |
| typedef enum { |
| PortDisabled, ///< Disable |
| PortEnabled ///< Enable |
| } PCIE_PORT_ENABLE; |
| |
| /// PCIe ACS capability - Access Control Services |
| typedef enum { |
| PcieAcsDisabled, ///< Disabled |
| PcieAcsEnabled, ///< Enabled |
| } PCIE_ACS_CAP; |
| |
| /// PCIe ClkPmSupport initialization |
| typedef enum { |
| ClkPmSupportDisabled, ///< Disable |
| ClkPmSupportEnabled ///< Enable |
| } CLKPM_SUPPORT_ENABLE; |
| |
| /// DDI Aux channel |
| typedef enum { |
| Aux1, ///< Aux1 |
| Aux2, ///< Aux2 |
| Aux3, ///< Aux3 |
| Aux4, ///< Aux4 |
| Aux5, ///< Aux5 |
| Aux6, ///< Aux6 |
| MaxAux ///< Not valid value, used to verify input |
| } PCIE_AUX_TYPE; |
| |
| /// DDI Hdp Index |
| typedef enum { |
| Hdp1, ///< Hdp1 |
| Hdp2, ///< Hdp2 |
| Hdp3, ///< Hdp3 |
| Hdp4, ///< Hdp4 |
| Hdp5, ///< Hdp5 |
| Hdp6, ///< Hdp6 |
| MaxHdp ///< Not valid value, used to verify input |
| } PCIE_HDP_TYPE; |
| |
| /// PCIe_DDI_DATA.Flags definitions |
| #define DDI_DATA_FLAGS_DP1_1_ONLY 0x01 ///< BIT[0] Selects downgrade PHY link to DP1.1 |
| #define EXT_DISPLAY_PATH_CAPS_DP_FIXED_VS_EN 0x02 ///< BIT[1] VBIOS will always output fixed voltage swing during DP link training |
| /// DP receiver definitions with fixed voltage swing |
| typedef enum { |
| DP_VS_0_4V_0DB, ///< 0x00 |
| DP_VS_0_6V_0DB, ///< 0x01 |
| DP_VS_0_8V_0DB, ///< 0x02 |
| DP_VS_1_2V_0DB, ///< 0x03 |
| DP_VS_0_4V_3_5DB = 0x8, ///< 0x08 |
| DP_VS_0_6V_3_5DB, ///< 0x09 |
| DP_VS_0_8V_3_5DB, ///< 0x0a |
| DP_VS_0_4V_6DB = 0x10, ///< 0x10 |
| DP_VS_0_6V_6DB, ///< 0x11 |
| DP_VS_0_4V_9_5DB = 0x18 ///< 0x18 |
| } DP_FIXED_VOLT_SWING_TYPE; |
| |
| // Macro for statically initialization of various structures |
| #define PCIE_ENGINE_DATA_INITIALIZER(mType, mStartLane, mEndLane) {mType, mStartLane, mEndLane} |
| #define PCIE_PORT_DATA_INITIALIZER(mPortPresent, mChannelType, mDevAddress, mHotplug, mMaxLinkSpeed, mMaxLinkCap, mAspm, mResetId) \ |
| {mPortPresent, mChannelType, mDevAddress, 0, mMaxLinkSpeed, mAspm, mHotplug, mResetId, {0, mMaxLinkCap, 0, 0}, {0, 0, 0}, EndpointDetect} |
| #define PCIE_PORT_DATA_INITIALIZER_V2(mPortPresent, mChannelType, mDevAddress, mDevFunction, mHotplug, mMaxLinkSpeed, mMaxLinkCap, mAspm, mResetId, mClkPmSupport) \ |
| {mPortPresent, mChannelType, mDevAddress, mDevFunction, mMaxLinkSpeed, mAspm, mHotplug, mResetId, {0, mMaxLinkCap, 0, mClkPmSupport}, {0, 0, 0}, EndpointDetect} |
| #define PCIE_DDI_DATA_INITIALIZER(mConnectorType, mAuxIndex, mHpdIndex ) \ |
| {mConnectorType, mAuxIndex, mHpdIndex, {{0}, {0}}, 0, 0} |
| #define PCIE_DDI_DATA_INITIALIZER_V1(mConnectorType, mAuxIndex, mHpdIndex, mMapping0, mMapping1, mPNInversion) \ |
| {mConnectorType, mAuxIndex, mHpdIndex, {mMapping0, mMapping1}, mPNInversion, 0} |
| #define PCIE_DDI_DATA_INITIALIZER_V2(mConnectorType, mAuxIndex, mHpdIndex, mMapping0, mMapping1, mPNInversion, mFlags) \ |
| {mConnectorType, mAuxIndex, mHpdIndex, {mMapping0, mMapping1}, mPNInversion, mFlags} |
| |
| ///IOMMU requestor ID |
| typedef struct { |
| IN UINT16 Bus :8; ///< Bus |
| IN UINT16 Device :5; ///< Device |
| IN UINT16 Function :3; ///< Function |
| } IOMMU_REQUESTOR_ID; |
| |
| /// IVMD exclusion range descriptor |
| typedef struct { |
| IN UINT32 Flags; /**< Descriptor flags |
| * @li @b Flags[31] - Terminate descriptor array. |
| * @li @b Flags[30] - Ignore descriptor. |
| */ |
| IN IOMMU_REQUESTOR_ID RequestorIdStart; ///< Requestor ID start |
| IN IOMMU_REQUESTOR_ID RequestorIdEnd; ///< Requestor ID end (use same as start for single ID) |
| IN UINT64 RangeBaseAddress; ///< Phisical base address of exclusion range |
| IN UINT64 RangeLength; ///< Length of exclusion range in bytes |
| } IOMMU_EXCLUSION_RANGE_DESCRIPTOR; |
| |
| /*---------------------------------------------------------------------------- |
| * GNB configuration info |
| *---------------------------------------------------------------------------- |
| */ |
| |
| /// LVDS Misc Control Field |
| typedef struct { |
| IN UINT8 FpdiMode:1; ///< This item configures LVDS 888bit panel mode |
| ///< @li FALSE = LVDS 888 panel in LDI mode |
| ///< @li TRUE = LVDS 888 panel in FPDI mode |
| ///< @BldCfgItem{BLDCFG_LVDS_MISC_888_FPDI_MODE} |
| IN UINT8 DlChSwap:1; ///< This item configures LVDS panel lower and upper link mapping |
| ///< @li FALSE = Lower link and upper link not swap |
| ///< @li TRUE = Lower link and upper link are swapped |
| ///< @BldCfgItem{BLDCFG_LVDS_MISC_DL_CH_SWAP} |
| IN UINT8 VsyncActiveLow:1; ///< This item configures polarity of frame pulse encoded in lvds data stream |
| ///< @li FALSE = Active high Frame Pulse/Vsync |
| ///< @li TRUE = Active low Frame Pulse/Vsync |
| ///< @BldCfgItem{BLDCFG_LVDS_MISC_VSYNC_ACTIVE_LOW} |
| IN UINT8 HsyncActiveLow:1; ///< This item configures polarity of line pulse encoded in lvds data |
| ///< @li FALSE = Active high Line Pulse |
| ///< @li TRUE = Active low Line Pulse / Hsync |
| ///< @BldCfgItem{BLDCFG_LVDS_MISC_HSYNC_ACTIVE_LOW} |
| IN UINT8 BLONActiveLow:1; ///< This item configures polarity of signal sent to digital BLON output pin |
| ///< @li FALSE = Not inverted(active high) |
| ///< @li TRUE = Inverted (active low) |
| ///< @BldCfgItem{BLDCFG_LVDS_MISC_BLON_ACTIVE_LOW} |
| IN UINT8 LvdsVoltOverwriteEn:1; ///< This item configures polarity of DP-to-LVDS output voltage overwrite |
| ///< @li FALSE = DP-to-LVDS output voltage overwrite disable, use VBIOS default setting. |
| ///< @li TRUE = Use ucLVDSVolAdjust value to program register LVDS_CTRL_4 |
| ///< @BldCfgItem{BLDCFG_LVDS_MISC_VOLT_OVERWRITE_ENABLE} |
| IN UINT8 Reserved:2; ///< Reserved |
| } LVDS_MISC_CONTROL_FIELD; |
| |
| /// LVDS Misc Control |
| typedef union _LVDS_MISC_CONTROL { |
| IN LVDS_MISC_CONTROL_FIELD Field; ///< LVDS_MISC_CONTROL_FIELD |
| IN UINT8 Value; ///< LVDS Misc Control Value |
| } LVDS_MISC_CONTROL; |
| |
| /// Display Misc Control Field |
| typedef struct { |
| IN UINT8 Reserved1:3; ///< Reserved |
| IN UINT8 VbiosFastBootEn:1; ///< This item configures VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open. |
| ///< @li FALSE = VBIOS fast boot is disable. |
| ///< @li TRUE = VBIOS fast boot is enable. |
| ///< @BldCfgItem{BLDCFG_DISPLAY_MISC_VBIOS_FAST_BOOT_ENABLE} |
| IN UINT8 Reserved2:4; ///< Reserved |
| } DISPLAY_MISC_CONTROL_FIELD; |
| |
| /// LVDS Misc Control |
| typedef union _DISPLAY_MISC_CONTROL { |
| IN DISPLAY_MISC_CONTROL_FIELD Field; ///< DISPLAY_MISC_CONTROL_FIELD |
| IN UINT8 Value; ///< Display Misc Control Value |
| } DISPLAY_MISC_CONTROL; |
| |
| /// POST Configuration settings for GNB. |
| typedef struct { |
| IN UINT8 IgpuEnableDisablePolicy; ///< This item defines the iGPU Enable/Disable policy |
| ///< @li 0 = Auto - use existing default - |
| ///< @li 1 = Disable iGPU if any PCIe/PCI graphics card present |
| ///< @BldCfgItem{BLDCFG_IGPU_ENABLE_DISABLE_POLICY} |
| } GNB_POST_CONFIGURATION; |
| |
| /// iGPU Enable/Disable Policy values |
| #define IGPU_DISABLE_AUTO 0 ///< Auto setting - disable iGPU if ANY PCI graphics or non-AMD PCIe graphics |
| #define IGPU_DISABLE_ANY_PCIE 1 ///< Disable iGPU if any PCI or PCIE graphics card is present |
| |
| /// ENV Configuration settings for GNB. |
| typedef struct { |
| IN UINT8 Gnb3dStereoPinIndex; ///< 3D Stereo Pin ID. |
| ///< @li 0 = Stereo 3D is disabled (default). |
| ///< @li 1 = Use processor pin HPD1. |
| ///< @li 2 = Use processor pin HPD2 |
| ///< @li 3 = Use processor pin HPD3 |
| ///< @li 4 = Use processor pin HPD4 |
| ///< @li 5 = Use processor pin HPD5 |
| ///< @li 6 = Use processor pin HPD6 |
| ///< @BldCfgItem{BLDCFG_STEREO_3D_PINOUT} |
| IN BOOLEAN IommuSupport; ///< IOMMU support. |
| ///< @li FALSE = Disabled. Disable and hide IOMMU device. |
| ///< @li TRUE = Initialize IOMMU subsystem. Generate ACPI IVRS table. |
| ///< BldCfgItem{BLDCFG_IOMMU_SUPPORT} |
| IN UINT16 LvdsSpreadSpectrum; ///< Spread spectrum value in 0.01 % |
| ///< BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM} |
| IN UINT16 LvdsSpreadSpectrumRate; ///< Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz |
| ///< BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE} |
| IN UINT8 LvdsPowerOnSeqDigonToDe; ///< This item configures panel initialization timing. |
| ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DIGON_TO_DE} |
| IN UINT8 LvdsPowerOnSeqDeToVaryBl; ///< This item configures panel initialization timing. |
| ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_VARY_BL} |
| IN UINT8 LvdsPowerOnSeqDeToDigon; ///< This item configures panel initialization timing. |
| ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_DE_TO_DIGON} |
| IN UINT8 LvdsPowerOnSeqVaryBlToDe; ///< This item configures panel initialization timing. |
| ///< @BldCfgItem{BLDCFG_LVDS_POWERS_ON_SEQ_VARY_BL_TO_DE} |
| IN UINT8 LvdsPowerOnSeqOnToOffDelay; ///< This item configures panel initialization timing. |
| ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_ON_TO_OFF_DELAY} |
| IN UINT8 LvdsPowerOnSeqVaryBlToBlon; ///< This item configures panel initialization timing. |
| ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON} |
| IN UINT8 LvdsPowerOnSeqBlonToVaryBl; ///< This item configures panel initialization timing. |
| ///< @BldCfgItem{BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL} |
| IN UINT16 LvdsMaxPixelClockFreq; ///< This item configures the maximum pixel clock frequency supported. |
| ///< @BldCfgItem{BLDCFG_LVDS_MAX_PIXEL_CLOCK_FREQ} |
| IN UINT32 LcdBitDepthControlValue; ///< This item configures the LCD bit depth control settings. |
| ///< @BldCfgItem{BLDCFG_LCD_BIT_DEPTH_CONTROL_VALUE} |
| IN UINT8 Lvds24bbpPanelMode; ///< This item configures the LVDS 24 BBP mode. |
| ///< @BldCfgItem{BLDCFG_LVDS_24BBP_PANEL_MODE} |
| IN LVDS_MISC_CONTROL LvdsMiscControl;///< This item configures LVDS swap/Hsync/Vsync/BLON |
| IN UINT16 PcieRefClkSpreadSpectrum; ///< Spread spectrum value in 0.01 % |
| ///< @BldCfgItem{BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM} |
| IN BOOLEAN GnbRemoteDisplaySupport; ///< This item enables Wireless Display Support |
| ///< @li TRUE = Enable Wireless Display Support |
| ///< @li FALSE = Disable Wireless Display Support |
| ///< @BldCfgItem{BLDCFG_REMOTE_DISPLAY_SUPPORT} |
| IN UINT8 LvdsMiscVoltAdjustment; ///< Register LVDS_CTRL_4 to adjust LVDS output voltage |
| ///< @BldCfgItem{BLDCFG_LVDS_MISC_VOL_ADJUSTMENT} |
| IN DISPLAY_MISC_CONTROL DisplayMiscControl;///< This item configures display misc control |
| IN DP_FIXED_VOLT_SWING_TYPE DpFixedVoltSwingType;///< To indicate fixed voltage swing value |
| ///< @BldCfgItem{BLDCFG_DP_FIXED_VOLT_SWING} |
| } GNB_ENV_CONFIGURATION; |
| |
| /// Configuration settings for GNB. |
| typedef struct { |
| IN UINT8 iGpuVgaMode; ///< VGA resources decoding configuration for iGPU |
| ///< @li 0 = iGPU decode all VGA resources (must be primary VGA adapter) |
| ///< @li 1 = iGPU will not decode any VGA resources (must be secondary graphics adapter) |
| IN UINT8 PcieAcsCapability; ///< Pcie ACS Capability support |
| ///< @li 0 = Disabled |
| ///< @li 1 = Enabled |
| IN UINT64 GnbIoapicAddress; ///< GNB IOAPIC Base Address(NULL if platform configured) |
| ///< @BldCfgItem{BLDCFG_GNB_IOAPIC_ADDRESS} |
| } GNB_MID_CONFIGURATION; |
| |
| /// GNB configuration info |
| typedef struct { |
| IN PCIe_COMPLEX_DESCRIPTOR *PcieComplexList; /**< Pointer to array of structures describe PCIe topology on each processor package or NULL. |
| * Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST |
| * Example of topology definition for single socket system: |
| * @code |
| * PCIe_PORT_DESCRIPTOR PortList [] = { |
| * // Initialize Port descriptor (PCIe port, Lanes 8:15, PCI Device Number 2, ...) |
| * { |
| * 0, //Descriptor flags |
| * PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 8, 15), |
| * PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 2, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0) |
| * }, |
| * // Initialize Port descriptor (PCIe port, Lanes 16:19, PCI Device Number 3, ...) |
| * { |
| * 0, //Descriptor flags |
| * PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 16, 19), |
| * PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 3, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0) |
| * }, |
| * // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...) |
| * { |
| * DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array |
| * PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4), |
| * PCIE_PORT_DATA_INITIALIZER (PortEnabled, ChannelTypeExt6db, 4, HotplugDisabled, PcieGenMaxSupported, PcieGenMaxSupported, AspmDisabled, 0) |
| * } |
| * }; |
| * PCIe_PORT_DESCRIPTOR DdiList [] = { |
| * // Initialize Ddi descriptor (DDI interface Lanes 24:27, Display Port Connector, ...) |
| * { |
| * 0, //Descriptor flags |
| * PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 24, 27), |
| * PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1) |
| * }, |
| * // Initialize Ddi descriptor (DDI interface Lanes 28:31, HDMI, ...) |
| * { |
| * DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array |
| * PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 28, 31), |
| * PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2) |
| * } |
| * }; |
| * PCIe_COMPLEX_DESCRIPTOR PlatformTopology = { |
| * DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate complexes list |
| * 0, //Socket ID |
| * &PortList[0], |
| * &DdiList[0], |
| * } |
| * @endcode |
| */ |
| IN UINT8 PsppPolicy; /**< PSPP (PCIe Speed Power Policy) |
| * @li @b 0 - Disabled |
| * @li @b 1 - Performance |
| * @li @b 2 - Balance-High |
| * @li @b 3 - Balance-Low |
| * @li @b 4 - Power Saving |
| */ |
| |
| } GNB_CONFIGURATION; |
| |
| /// Late Configuration settings for GNB. |
| typedef struct { |
| IN BOOLEAN DockedTdpHeadroom; ///< Docked TDP headroom |
| ///< @li TRUE = Enable docked TDP headroom |
| ///< @li FALSE = Disable docked TDP headroom |
| ///< @BldCfgItem{BLDCFG_DOCKED_TDP_HEADROOM} |
| } GNB_LATE_CONFIGURATION; |
| |
| // |
| // MEMORY-SPECIFIC DATA STRUCTURES |
| // |
| // |
| // |
| // |
| // AGESA MAXIMIUM VALUES |
| // |
| // These Max values are used to define array sizes and associated loop |
| // counts in the code. They reflect the maximum values that AGESA |
| // currently supports and does not necessarily reflect the hardware |
| // capabilities of configuration. |
| // |
| |
| #define MAX_SOCKETS_SUPPORTED 8 ///< Max number of sockets in system |
| #define MAX_CHANNELS_PER_SOCKET 4 ///< Max Channels per sockets |
| #define MAX_DIMMS_PER_CHANNEL 4 ///< Max DIMMs on a memory channel (independent of platform) |
| #define NUMBER_OF_DELAY_TABLES 9 ///< Number of tables defined in CH_DEF_STRUCT. |
| ///< Eg: UINT16 *RcvEnDlys; |
| ///< UINT8 *WrDqsDlys; |
| ///< UINT8 *RdDqsDlys; |
| ///< UINT8 *WrDatDlys; |
| ///< UINT8 *RdDqsMinDlys; |
| ///< UINT8 *RdDqsMaxDlys; |
| ///< UINT8 *WrDatMinDlys; |
| ///< UINT8 *WrDatMaxDlys; |
| #define NUMBER_OF_FAILURE_MASK_TABLES 1 ///< Number of failure mask tables |
| |
| #define MAX_PLATFORM_TYPES 16 ///< Platform types per system |
| |
| #define MCT_TRNG_KEEPOUT_START 0x00004000ul ///< base [39:8] |
| #define MCT_TRNG_KEEPOUT_END 0x00007FFFul ///< base [39:8] |
| #define DATAEYE_VREF_RANGE 31 ///< Number of VREF steps in Data Eye Bitmap |
| |
| #define UMA_ATTRIBUTE_INTERLEAVE 0x80000000ul ///< Uma Region is interleaved |
| #define UMA_ATTRIBUTE_ON_DCT0 0x40000000ul ///< UMA resides on memory that belongs to DCT0 |
| #define UMA_ATTRIBUTE_ON_DCT1 0x20000000ul ///< UMA resides on memory that belongs to DCT1 |
| #define UMA_ATTRIBUTE_ON_DCT2 0x10000000ul ///< UMA resides on memory that belongs to DCT2 |
| #define UMA_ATTRIBUTE_ON_DCT3 0x08000000ul ///< UMA resides on memory that belongs to DCT3 |
| |
| typedef UINT8 PSO_TABLE; ///< Platform Configuration Table |
| |
| // AGESA DEFINITIONS |
| // |
| // Many of these are derived from the platform and hardware specific definitions |
| |
| /// EccSymbolSize override value |
| #define ECCSYMBOLSIZE_USE_BKDG 0 ///< Use BKDG Recommended Value |
| #define ECCSYMBOLSIZE_FORCE_X4 4 ///< Force to x4 |
| #define ECCSYMBOLSIZE_FORCE_X8 8 ///< Force to x8 |
| /// CPU Package Type |
| #define PT_L1 0 ///< L1 Package type |
| #define PT_M2 1 ///< AM Package type |
| #define PT_S1 2 ///< S1 Package type |
| |
| /// Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT |
| #define DDR400_FREQUENCY 200 ///< DDR 400 |
| #define DDR533_FREQUENCY 266 ///< DDR 533 |
| #define DDR667_FREQUENCY 333 ///< DDR 667 |
| #define DDR800_FREQUENCY 400 ///< DDR 800 |
| #define DDR1066_FREQUENCY 533 ///< DDR 1066 |
| #define DDR1333_FREQUENCY 667 ///< DDR 1333 |
| #define DDR1600_FREQUENCY 800 ///< DDR 1600 |
| #define DDR1866_FREQUENCY 933 ///< DDR 1866 |
| #define DDR2100_FREQUENCY 1050 ///< DDR 2100 |
| #define DDR2133_FREQUENCY 1066 ///< DDR 2133 |
| #define DDR2400_FREQUENCY 1200 ///< DDR 2400 |
| #define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency |
| |
| /// Build Configuration values for BLDCFG_TIMING_MODE_SELECT |
| #define TIMING_MODE_AUTO 0 ///< Use best rate possible |
| #define TIMING_MODE_LIMITED 1 ///< Set user top limit |
| #define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed |
| |
| /// Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE |
| #define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM |
| #define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM |
| |
| /// Build Configuration values for BLDCFG_POWER_DOWN_MODE |
| #define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode |
| #define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode |
| #define POWER_DOWN_MODE_AUTO 2 ///< AGESA to select power down mode |
| |
| /// Structures use to pass system Logical CPU-ID |
| typedef struct { |
| IN OUT UINT64 Family; ///< Indicates logical ID Family |
| IN OUT UINT64 Revision; ///< Indicates logical ID Family |
| } CPU_LOGICAL_ID; |
| |
| /// Structures use to report AMP status |
| typedef struct { |
| OUT BOOLEAN AmpVoltageValid; ///< Indicates if Amp voltage is valid |
| OUT BOOLEAN AmpSupportDetectedButNotEnabled; ///< Indicates if Amp support is detected but not enabled |
| OUT BOOLEAN AmpSelectedButNotEnabled; ///< Indicates if Amp is selected but not enabled |
| } AMP_STATUS; |
| |
| /// Normalized Critical Composite Data Eye |
| /// Bit 15 represents trained eye Center |
| /// Bit 0 represents eye center -15 delay steps |
| /// Bit 31 represents eye center +16 delay steps |
| /// Offset 0 represents +15 Vref Steps |
| /// Offset 31 represents -15 Vref Steps |
| typedef UINT32 COMPOSITE_DATAEYE[DATAEYE_VREF_RANGE]; |
| |
| /// Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE |
| typedef enum { |
| AMD_PLATFORM_SERVER = 0x8000, ///< Server |
| AMD_PLATFORM_DESKTOP = 0x10000, ///< Desktop |
| AMD_PLATFORM_MOBILE = 0x20000, ///< Mobile |
| } AMD_PLATFORM_TYPE; |
| |
| /// Dram technology type |
| typedef enum { |
| DDR2_TECHNOLOGY, ///< DDR2 technology |
| DDR3_TECHNOLOGY, ///< DDR3 technology |
| STUB_TECHNOLOGY, ///< |
| UNSUPPORTED_TECHNOLOGY, ///< Unsupported technology |
| } TECHNOLOGY_TYPE; |
| |
| /// Low voltage support |
| typedef enum { |
| VOLT_INITIAL, ///< Initial value for VDDIO |
| VOLT1_5, ///< 1.5 Volt |
| VOLT1_35, ///< 1.35 Volt |
| VOLT1_25, ///< 1.25 Volt |
| VOLT_UNSUPPORTED = 0xFF ///< No common voltage found |
| } DIMM_VOLTAGE; |
| |
| /// AMP voltage support |
| typedef enum { |
| AMP_VOLT_RSVD, ///< Reserved |
| AMP_VOLT1_5, ///< 1.5 Volt |
| AMP_VOLT1_55, ///< 1.55 Volt |
| AMP_VOLT1_6, ///< 1.6 Volt |
| AMP_VOLT1_65, ///< 1.65 Volt |
| AMP_VOLT1_7, ///< 1.7 Volt |
| AMP_VOLT1_75, ///< 1.75 Volt |
| AMP_VOLT1_8, ///< 1.8 Volt |
| AMP_VOLT1_85, ///< 1.85 Volt |
| AMP_VOLT1_9, ///< 1.9 Volt |
| AMP_VOLT1_45 = 0x10, ///< 1.45 Volt |
| AMP_VOLT1_4 = 0x20, ///< 1.4 Volt |
| AMP_VOLT1_35 = 0x30, ///< 1.35 Volt |
| AMP_VOLT1_3 = 0x40, ///< 1.3 Volt |
| AMP_VOLT1_25 = 0x50, ///< 1.25 Volt |
| AMP_VOLT1_2 = 0x60 ///< 1.2 Volt |
| } AMP_DIMM_VOLTAGE; |
| |
| /// UMA Mode |
| typedef enum { |
| UMA_NONE = 0, ///< UMA None |
| UMA_SPECIFIED = 1, ///< UMA Specified |
| UMA_AUTO = 2 ///< UMA Auto |
| } UMA_MODE; |
| |
| /// Force Training Mode |
| typedef enum { |
| FORCE_TRAIN_1D = 0, ///< 1D Training only |
| FORCE_TRAIN_AUTO = 2 ///< Auto - 1D or 2D depending on configuration |
| } FORCE_TRAIN_MODE; |
| |
| /// The possible DRAM prefetch mode settings. |
| typedef enum { |
| DRAM_PREFETCHER_AUTO, ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled. |
| DISABLE_DRAM_PREFETCH_FOR_IO, ///< Disable DRAM prefetching for I/O requests only. |
| DISABLE_DRAM_PREFETCH_FOR_CPU, ///< Disable DRAM prefetching for requests from processor cores only. |
| DISABLE_DRAM_PREFETCHER, ///< Disable DRAM prefetching. |
| MAX_DRAM_FREFETCH_MODE ///< Not a DRAM prefetch mode, use for limit checking. |
| } DRAM_PREFETCH_MODE; |
| |
| /// Build Configuration values for BLDCFG_UMA_ALIGNMENT |
| typedef enum { |
| NO_UMA_ALIGNED = 0x00FFFFFF, ///< NO UMA aligned |
| UMA_4MB_ALIGNED = 0x00FFFFC0, ///< UMA 4MB aligned |
| UMA_128MB_ALIGNED = 0x00FFF800, ///< UMA 128MB aligned |
| UMA_256MB_ALIGNED = 0x00FFF000, ///< UMA 256MB aligned |
| UMA_512MB_ALIGNED = 0x00FFE000, ///< UMA 512MB aligned |
| } UMA_ALIGNMENT; |
| |
| /// |
| /// Global MCT Configuration Status Word (GStatus) |
| /// |
| typedef enum { |
| GsbMTRRshort, ///< Ran out of MTRRs while mapping memory |
| GsbAllECCDimms, ///< All banks of all Nodes are ECC capable |
| GsbDramECCDis, ///< Dram ECC requested but not enabled. |
| GsbSoftHole, ///< A Node Base gap was created |
| GsbHWHole, ///< A HW dram remap was created |
| GsbNodeIntlv, ///< Node Memory interleaving was enabled |
| GsbSpIntRemapHole, ///< Special condition for Node Interleave and HW remapping |
| GsbEnDIMMSpareNW, ///< Indicates that DIMM Spare can be used without a warm reset |
| |
| GsbEOL ///< End of list |
| } GLOBAL_STATUS_FIELD; |
| |
| /// |
| /// Local Error Status (DIE_STRUCT.ErrStatus[31:0]) |
| /// |
| typedef enum { |
| EsbNoDimms, ///< No DIMMs |
| EsbSpdChkSum, ///< SPD Checksum fail |
| EsbDimmMismatchM, ///< dimm module type(buffer) mismatch |
| EsbDimmMismatchT, ///< dimm CL/T mismatch |
| EsbDimmMismatchO, ///< dimm organization mismatch (128-bit) |
| EsbNoTrcTrfc, ///< SPD missing Trc or Trfc info |
| EsbNoCycTime, ///< SPD missing byte 23 or 25 |
| EsbBkIntDis, ///< Bank interleave requested but not enabled |
| EsbDramECCDis, ///< Dram ECC requested but not enabled |
| EsbSpareDis, ///< Online spare requested but not enabled |
| EsbMinimumMode, ///< Running in Minimum Mode |
| EsbNoRcvrEn, ///< No DQS Receiver Enable pass window found |
| EsbSmallRcvr, ///< DQS Rcvr En pass window too small (far right of dynamic range) |
| EsbNoDqsPos, ///< No DQS-DQ passing positions |
| EsbSmallDqs, ///< DQS-DQ passing window too small |
| EsbDCBKScrubDis, ///< DCache scrub requested but not enabled |
| |
| EsbEMPNotSupported, ///< Processor is not capable for EMP. |
| EsbEMPConflict, ///< EMP requested but cannot be enabled since |
| ///< channel interleaving, bank interleaving, or bank swizzle is enabled. |
| EsbEMPDis, ///< EMP requested but cannot be enabled since |
| ///< memory size of each DCT is not a power of two. |
| |
| EsbEOL ///< End of list |
| } ERROR_STATUS_FIELD; |
| |
| /// |
| /// Local Configuration Status (DIE_STRUCT.Status[31:0]) |
| /// |
| typedef enum { |
| SbRegistered, ///< All DIMMs are Registered |
| SbEccDimms, ///< All banks ECC capable |
| SbParDimms, ///< All banks Addr/CMD Parity capable |
| SbDiagClks, ///< Jedec ALL slots clock enable diag mode |
| Sb128bitmode, ///< DCT in 128-bit mode operation |
| Sb64MuxedMode, ///< DCT in 64-bit mux'ed mode. |
| Sb2TMode, ///< 2T CMD timing mode is enabled. |
| SbSWNodeHole, ///< Remapping of Node Base on this Node to create a gap. |
| SbHWHole, ///< Memory Hole created on this Node using HW remapping. |
| SbOver400Mhz, ///< DCT freq greater than or equal to 400MHz flag |
| SbDQSPosPass2, ///< Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz |
| SbDQSRcvLimit, ///< Used for DQSRcvEnTrain to know we have reached the upper bound. |
| SbExtConfig, ///< Indicate the default setting for extended PCI configuration support |
| SbLrdimms, ///< All DIMMs are LRDIMMs |
| |
| SbEOL ///< End of list |
| } LOCAL_STATUS_FIELD; |
| |
| |
| ///< CPU MSR Register definitions ------------------------------------------ |
| #define SYS_CFG 0xC0010010ul |
| #define TOP_MEM 0xC001001Aul |
| #define TOP_MEM2 0xC001001Dul |
| #define HWCR 0xC0010015ul |
| #define NB_CFG 0xC001001Ful |
| |
| #define FS_BASE 0xC0000100ul |
| #define IORR0_BASE 0xC0010016ul |
| #define IORR0_MASK 0xC0010017ul |
| #define BU_CFG 0xC0011023ul |
| #define BU_CFG2 0xC001102Aul |
| #define COFVID_STAT 0xC0010071ul |
| #define TSC 0x10 |
| |
| //----------------------------------------------------------------------------- |
| /// |
| /// SPD Data for each DIMM. |
| /// |
| typedef struct _SPD_DEF_STRUCT { |
| IN BOOLEAN DimmPresent; ///< Indicates that the DIMM is present and Data is valid |
| IN UINT8 Data[256]; ///< Buffer for 256 Bytes of SPD data from DIMM |
| } SPD_DEF_STRUCT; |
| |
| /// |
| /// Channel Definition Structure. |
| /// This data structure defines entries that are specific to the channel initialization |
| /// |
| typedef struct _CH_DEF_STRUCT { |
| OUT UINT8 ChannelID; ///< Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D) |
| OUT TECHNOLOGY_TYPE TechType; ///< Technology type of this channel |
| OUT UINT8 ChDimmPresent; ///< For each bit n 0..7, 1 = DIMM n is present. |
| ///< DIMM# Select Signal |
| ///< 0 MA0_CS_L[0, 1] |
| ///< 1 MB0_CS_L[0, 1] |
| ///< 2 MA1_CS_L[0, 1] |
| ///< 3 MB1_CS_L[0, 1] |
| ///< 4 MA2_CS_L[0, 1] |
| ///< 5 MB2_CS_L[0, 1] |
| ///< 6 MA3_CS_L[0, 1] |
| ///< 7 MB3_CS_L[0, 1] |
| |
| OUT struct _DCT_STRUCT *DCTPtr; ///< Pointer to the DCT data of this channel. |
| OUT struct _DIE_STRUCT *MCTPtr; ///< Pointer to the node data of this channel. |
| OUT SPD_DEF_STRUCT *SpdPtr; ///< Pointer to the SPD data for this channel. (Setup by NB Constructor) |
| OUT SPD_DEF_STRUCT *DimmSpdPtr[MAX_DIMMS_PER_CHANNEL]; ///< Array of pointers to |
| ///< SPD Data for each Dimm. (Setup by Tech Block Constructor) |
| OUT UINT8 ChDimmValid; ///< For each bit n 0..3, 1 = DIMM n is valid and is/will be configured where 4..7 are reserved. |
| ///< |
| OUT UINT8 RegDimmPresent; ///< For each bit n 0..3, 1 = DIMM n is a registered DIMM where 4..7 are reserved. |
| OUT UINT8 LrDimmPresent; ///< For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. |
| OUT UINT8 SODimmPresent; ///< For each bit n 0..3, 1 = DIMM n is a SO-DIMM, where 4..7 are reserved. |
| OUT UINT8 Loads; ///< Number of devices loading bus |
| OUT UINT8 Dimms; ///< Number of DIMMs loading Channel |
| OUT UINT8 Ranks; ///< Number of ranks loading Channel DATA |
| OUT BOOLEAN SlowMode; ///< 1T or 2T CMD mode (slow access mode) |
| ///< FALSE = 1T |
| ///< TRUE = 2T |
| ///< The following pointers will be pointed to dynamically allocated buffers. |
| ///< Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below. |
| ///< Example: If DIMM and Byte based training, then |
| ///< XX is a value in Hex |
| ///< BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE |
| ///< Row1 - Logical DIMM0 XX XX XX XX XX XX XX XX XX |
| ///< Row2 - Logical DIMM1 XX XX XX XX XX XX XX XX XX |
| OUT UINT16 *RcvEnDlys; ///< DQS Receiver Enable Delays |
| OUT UINT8 *WrDqsDlys; ///< Write DQS delays (only valid for DDR3) |
| OUT UINT8 *RdDqsDlys; ///< Read Dqs delays |
| OUT UINT8 *WrDatDlys; ///< Write Data delays |
| OUT UINT8 *RdDqs2dDlys; ///< 2d Read DQS data |
| OUT UINT8 *RdDqsMinDlys; ///< Minimum Window for Read DQS |
| OUT UINT8 *RdDqsMaxDlys; ///< Maximum Window for Read DQS |
| OUT UINT8 *WrDatMinDlys; ///< Minimum Window for Write data |
| OUT UINT8 *WrDatMaxDlys; ///< Maximum Window for Write data |
| OUT UINT16 *RcvEnDlysMemPs1; ///< DQS Receiver Enable Delays for Mem Pstate 1 |
| OUT UINT8 *WrDqsDlysMemPs1; ///< Write DQS delays (only valid for DDR3) for Mem Pstate 1 |
| OUT UINT8 *RdDqsDlysMemPs1; ///< Read Dqs delays for Memory Pstate 1 |
| OUT UINT8 *WrDatDlysMemPs1; ///< Write Data delays for Memory Pstate 1 |
| OUT UINT8 *RdDqs2dDlysMemPs1; ///< 2d Read DQS data for Memory Pstate 1 |
| OUT UINT8 *RdDqsMinDlysMemPs1; ///< Minimum Window for Read DQS for Memory Pstate 1 |
| OUT UINT8 *RdDqsMaxDlysMemPs1; ///< Maximum Window for Read DQS for Memory Pstate 1 |
| OUT UINT8 *WrDatMinDlysMemPs1; ///< Minimum Window for Write data for Memory Pstate 1 |
| OUT UINT8 *WrDatMaxDlysMemPs1; ///< Maximum Window for Write data for Memory Pstate 1 |
| OUT UINT8 RowCount; ///< Number of rows of the allocated buffer. |
| OUT UINT8 ColumnCount; ///< Number of columns of the allocated buffer. |
| OUT UINT8 *FailingBitMask; ///< Table of masks to Track Failing bits |
| OUT UINT8 *FailingBitMaskMemPs1; ///< Table of masks to Track Failing bits for Memory Pstate 1 |
| OUT VOID *RdDataEyes; ///< Pointer to Read Data Eye Bitmaps |
| OUT VOID *WrDataEyes; ///< Pointer to Write Data Eye Bitmaps |
| OUT UINT32 DctOdcCtl; ///< Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h) |
| OUT UINT32 DctAddrTmg; ///< Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h) |
| OUT UINT32 PhyRODTCSLow; ///< Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 230h) |
| OUT UINT32 PhyRODTCSHigh; ///< Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 234h) |
| OUT UINT32 PhyWODTCSLow; ///< Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 238h) |
| OUT UINT32 PhyWODTCSHigh; ///< Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 23Ch) |
| OUT UINT8 PhyWLODT[4]; ///< Write Levelization ODT Pattern for Dimm 0-3 or CS 0-7(see BKDG FN2:Offset 9Ch, index 0x8[11:8]) |
| OUT UINT16 DctEccDqsLike; ///< DCT DQS ECC UINT8 like... |
| OUT UINT8 DctEccDqsScale; ///< DCT DQS ECC UINT8 scale |
| OUT UINT16 PtrPatternBufA; ///< Ptr on stack to aligned DQS testing pattern |
| OUT UINT16 PtrPatternBufB; ///< Ptr on stack to aligned DQS testing pattern |
| OUT UINT8 ByteLane; ///< Current UINT8 Lane (0..7) |
| OUT UINT8 Direction; ///< Current DQS-DQ training write direction (0=read, 1=write) |
| OUT UINT8 Pattern; ///< Current pattern |
| OUT UINT8 DqsDelay; ///< Current DQS delay value |
| OUT UINT16 HostBiosSrvc1; ///< UINT16 sized general purpose field for use by host BIOS. Scratch space. |
| OUT UINT32 HostBiosSrvc2; ///< UINT32 sized general purpose field for use by host BIOS. Scratch space. |
| OUT UINT16 DctMaxRdLat[4]; ///< Max Read Latency (ns) for the DCT |
| ///< DctMaxRdLat [i] is for NBPstate i |
| OUT UINT8 DIMMValidCh; ///< DIMM# in CH |
| OUT UINT8 MaxCh; ///< Max number of CH in system |
| OUT UINT8 Dct; ///< Dct pointer |
| OUT UINT8 WrDatGrossH; ///< Write Data Gross delay high value |
| OUT UINT8 DqsRcvEnGrossL; ///< DQS Receive Enable Gross Delay low |
| |
| OUT UINT8 TrwtWB; ///< Non-SPD timing value for TrwtWB |
| OUT UINT8 CurrRcvrDctADelay; ///< for keep current RcvrEnDly |
| OUT UINT16 T1000; ///< get the T1000 figure (cycle time (ns) * 1K) |
| OUT UINT8 DqsRcvEnPass; ///< for TrainRcvrEn UINT8 lane pass flag |
| OUT UINT8 DqsRcvEnSaved; ///< for TrainRcvrEn UINT8 lane saved flag |
| OUT UINT8 SeedPass1Remainder; ///< for Phy assisted DQS receiver enable training |
| |
| OUT UINT8 ClToNbFlag; ///< is used to restore ClLinesToNbDis bit after memory |
| OUT UINT32 NodeSysBase; ///< for channel interleave usage |
| OUT UINT8 RefRawCard[MAX_DIMMS_PER_CHANNEL]; ///< Array of rawcards detected |
| OUT UINT8 CtrlWrd02[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 2 values per DIMM |
| OUT UINT8 CtrlWrd03[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 3 values per DIMM |
| OUT UINT8 CtrlWrd04[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 4 values per DIMM |
| OUT UINT8 CtrlWrd05[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 5 values per DIMM |
| OUT UINT8 CtrlWrd08[MAX_DIMMS_PER_CHANNEL]; ///< Control Word 8 values per DIMM |
| |
| OUT UINT16 CsPresentDCT; ///< For each bit n 0..7, 1 = Chip-select n is present |
| OUT UINT8 DimmMirrorPresent; ///< For each bit n 0..3, 1 = DIMM n is OnDimmMirror capable where 4..7 are reserved. |
| OUT UINT8 DimmSpdCse; ///< For each bit n 0..3, 1 = DIMM n SPD checksum error where 4..7 are reserved. |
| OUT UINT8 DimmExclude; ///< For each bit n 0..3, 1 = DIMM n gets excluded where 4..7 are reserved. |
| OUT UINT8 DimmYr06; ///< Bitmap indicating which Dimms have a manufacturer's year code <= 2006 |
| OUT UINT8 DimmWk2406; ///< Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June) |
| OUT UINT8 DimmPlPresent; ///< Bitmap indicating that Planar (1) or Stacked (0) Dimms are present. |
| OUT UINT8 DimmQrPresent; ///< QuadRank DIMM present? |
| OUT UINT8 DimmDrPresent; ///< Bitmap indicating that Dual Rank Dimms are present |
| OUT UINT8 DimmSRPresent; ///< Bitmap indicating that Single Rank Dimms are present |
| OUT UINT8 Dimmx4Present; ///< For each bit n 0..3, 1 = DIMM n contains x4 data devices. where 4..7 are reserved. |
| OUT UINT8 Dimmx8Present; ///< For each bit n 0..3, 1 = DIMM n contains x8 data devices. where 4..7 are reserved. |
| OUT UINT8 Dimmx16Present; ///< For each bit n 0..3, 1 = DIMM n contains x16 data devices. where 4..7 are reserved. |
| OUT UINT8 LrdimmPhysicalRanks[MAX_DIMMS_PER_CHANNEL];///< Number of Physical Ranks for LRDIMMs |
| OUT UINT8 LrDimmLogicalRanks[MAX_DIMMS_PER_CHANNEL];///< Number of LRDIMM Logical ranks in this configuration |
| OUT UINT8 LrDimmRankMult[MAX_DIMMS_PER_CHANNEL];///< Rank Multipication factor per dimm. |
| OUT UINT8 DimmNibbleAccess; ///< For each bit n 0..3, 1 = DIMM n will use nibble signaling. Where 4..7 are reserved. |
| OUT UINT8 *MemClkDisMap; ///< This pointer will be set to point to an array that describes |
| ///< the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will |
| ///< base on this array to disable unused MemClk to save power. |
| ///< |
| ///< The array must have 8 entries. Each entry, which associates with |
| ///< one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to. |
| |
| OUT UINT8 *CKETriMap; ///< This pointer will be set to point to an array that describes |
| ///< the routing of CKE pins to the DIMMs' ranks. |
| ///< The array must have 2 entries. Each entry, which associates with |
| ///< one CKE pin, is a bitmap of 8 CS that that CKE is routed to. |
| ///< AGESA will base on this array to disable unused CKE pins to save power. |
| |
| OUT UINT8 *ODTTriMap; ///< This pointer will be set to point to an array that describes |
| ///< the routing of ODT pins to the DIMMs' ranks. |
| ///< The array must have 4 entries. Each entry, which associates with |
| ///< one ODT pin, is a bitmap of 8 CS that that ODT is routed to. |
| ///< AGESA will base on this array to disable unused ODT pins to save power. |
| |
| OUT UINT8 *ChipSelTriMap; ///< This pointer will be set to point to an array that describes |
| ///< the routing of chip select pins to the DIMMs' ranks. |
| ///< The array must have 8 entries. Each entry is a bitmap of 8 CS. |
| ///< AGESA will base on this array to disable unused Chip select pins to save power. |
| |
| OUT BOOLEAN ExtendTmp; ///< If extended temperature is supported on all dimms on a channel. |
| |
| OUT UINT8 MaxVref; ///< Maximum Vref Value for channel |
| |
| OUT UINT8 Reserved[100]; ///< Reserved |
| } CH_DEF_STRUCT; |
| |
| /// |
| /// DCT Channel Timing Parameters. |
| /// This data structure sets timings that are specific to the channel. |
| /// |
| typedef struct _CH_TIMING_STRUCT { |
| OUT UINT16 DctDimmValid; ///< For each bit n 0..3, 1=DIMM n is valid and is/will be configured where 4..7 are reserved. |
| OUT UINT16 DimmMirrorPresent; ///< For each bit n 0..3, 1=DIMM n is OnDimmMirror capable where 4..7 are reserved. |
| OUT UINT16 DimmSpdCse; ///< For each bit n 0..3, 1=DIMM n SPD checksum error where 4..7 are reserved. |
| OUT UINT16 DimmExclude; ///< For each bit n 0..3, 1 = DIMM n gets excluded where 4..7 are reserved. |
| OUT UINT16 CsPresent; ///< For each bit n 0..7, 1=Chip-select n is present |
| OUT UINT16 CsEnabled; ///< For each bit n 0..7, 1=Chip-select n is enabled |
| OUT UINT16 CsTestFail; ///< For each bit n 0..7, 1=Chip-select n is present but disabled |
| OUT UINT16 CsTrainFail; ///< Bitmap showing which chipselects failed training |
| OUT UINT16 DIMM1KPage; ///< For each bit n 0..3, 1=DIMM n contains 1K page devices. where 4..7 are reserved |
| OUT UINT16 DimmQrPresent; ///< QuadRank DIMM present? |
| OUT UINT16 DimmDrPresent; ///< Bitmap indicating that Dual Rank Dimms are present , where 4..7 are reserved |
| OUT UINT8 DimmSRPresent; ///< Bitmap indicating that Single Rank Dimms are present, where 4..7 are reserved |
| OUT UINT16 Dimmx4Present; ///< For each bit n 0..3, 1=DIMM n contains x4 data devices. where 4..7 are reserved |
| OUT UINT16 Dimmx8Present; ///< For each bit n 0..3, 1=DIMM n contains x8 data devices. where 4..7 are reserved |
| OUT UINT16 Dimmx16Present; ///< For each bit n 0..3, 1=DIMM n contains x16 data devices. where 4..7 are reserved |
| |
| OUT UINT16 DIMMTrcd; ///< Minimax Trcd*40 (ns) of DIMMs |
| OUT UINT16 DIMMTrp; ///< Minimax Trp*40 (ns) of DIMMs |
| OUT UINT16 DIMMTrtp; ///< Minimax Trtp*40 (ns) of DIMMs |
| OUT UINT16 DIMMTras; ///< Minimax Tras*40 (ns) of DIMMs |
| OUT UINT16 DIMMTrc; ///< Minimax Trc*40 (ns) of DIMMs |
| OUT UINT16 DIMMTwr; ///< Minimax Twr*40 (ns) of DIMMs |
| OUT UINT16 DIMMTrrd; ///< Minimax Trrd*40 (ns) of DIMMs |
| OUT UINT16 DIMMTwtr; ///< Minimax Twtr*40 (ns) of DIMMs |
| OUT UINT16 DIMMTfaw; ///< Minimax Tfaw*40 (ns) of DIMMs |
| OUT UINT16 TargetSpeed; ///< Target DRAM bus speed in MHz |
| OUT UINT16 Speed; ///< DRAM bus speed in MHz |
| ///< 400 (MHz) |
| ///< 533 (MHz) |
| ///< 667 (MHz) |
| ///< 800 (MHz) |
| ///< and so on... |
| OUT UINT8 CasL; ///< CAS latency DCT setting (busclocks) |
| OUT UINT8 Trcd; ///< DCT Trcd (busclocks) |
| OUT UINT8 Trp; ///< DCT Trp (busclocks) |
| OUT UINT8 Trtp; ///< DCT Trtp (busclocks) |
| OUT UINT8 Tras; ///< DCT Tras (busclocks) |
| OUT UINT8 Trc; ///< DCT Trc (busclocks) |
| OUT UINT8 Twr; ///< DCT Twr (busclocks) |
| OUT UINT8 Trrd; ///< DCT Trrd (busclocks) |
| OUT UINT8 Twtr; ///< DCT Twtr (busclocks) |
| OUT UINT8 Tfaw; ///< DCT Tfaw (busclocks) |
| OUT UINT8 Trfc0; ///< DCT Logical DIMM0 Trfc |
| ///< 0 = 75ns (for 256Mb devs) |
| ///< 1 = 105ns (for 512Mb devs) |
| ///< 2 = 127.5ns (for 1Gb devs) |
| ///< 3 = 195ns (for 2Gb devs) |
| ///< 4 = 327.5ns (for 4Gb devs) |
| OUT UINT8 Trfc1; ///< DCT Logical DIMM1 Trfc (see Trfc0 for format) |
| OUT UINT8 Trfc2; ///< DCT Logical DIMM2 Trfc (see Trfc0 for format) |
| OUT UINT8 Trfc3; ///< DCT Logical DIMM3 Trfc (see Trfc0 for format) |
| OUT UINT32 DctMemSize; ///< Base[47:16], total DRAM size controlled by this DCT. |
| ///< |
| OUT BOOLEAN SlowMode; ///< 1T or 2T CMD mode (slow access mode) |
| ///< FALSE = 1T |
| ///< TRUE = 2T |
| OUT UINT8 TrwtTO; ///< DCT TrwtTO (busclocks) |
| OUT UINT8 Twrrd; ///< DCT Twrrd (busclocks) |
| OUT UINT8 Twrwr; ///< DCT Twrwr (busclocks) |
| OUT UINT8 Trdrd; ///< DCT Trdrd (busclocks) |
| OUT UINT8 TrwtWB; ///< DCT TrwtWB (busclocks) |
| OUT UINT8 TrdrdSD; ///< DCT TrdrdSD (busclocks) |
| OUT UINT8 TwrwrSD; ///< DCT TwrwrSD (busclocks) |
| OUT UINT8 TwrrdSD; ///< DCT TwrrdSD (busclocks) |
| OUT UINT16 MaxRdLat; ///< Max Read Latency |
| OUT UINT8 WrDatGrossH; ///< Temporary variables must be removed |
| OUT UINT8 DqsRcvEnGrossL; ///< Temporary variables must be removed |
| } CH_TIMING_STRUCT; |
| |
| /// |
| /// Data for each DCT. |
| /// This data structure defines data used to configure each DRAM controller. |
| /// |
| typedef struct _DCT_STRUCT { |
| OUT UINT8 Dct; ///< Current Dct |
| OUT CH_TIMING_STRUCT Timings; ///< Channel Timing structure |
| OUT CH_TIMING_STRUCT *TimingsMemPs1; ///< Pointed to channel timing structure for memory Pstate 1 |
| OUT CH_DEF_STRUCT *ChData; ///< Pointed to a dynamically allocated array of Channel structures |
| OUT UINT8 ChannelCount; ///< Number of channel per this DCT |
| OUT BOOLEAN BkIntDis; ///< Bank interleave requested but not enabled on current DCT |
| OUT UINT8 BankAddrMap; ///< Bank Address Mapping |
| OUT UINT8 EnabledChipSels; ///< Number of enabled chip selects on current DCT |
| } DCT_STRUCT; |
| |
| |
| /// |
| /// Data Structure defining each Die. |
| /// This data structure contains information that is used to configure each Die. |
| /// |
| typedef struct _DIE_STRUCT { |
| |
| /// Advanced: |
| |
| OUT UINT8 NodeId; ///< Node ID of current controller |
| OUT UINT8 SocketId; ///< Socket ID of this Die |
| OUT UINT8 DieId; ///< ID of this die relative to the socket |
| OUT PCI_ADDR PciAddr; ///< Pci bus and device number of this controller. |
| OUT AGESA_STATUS ErrCode; ///< Current error condition of Node |
| ///< 0x0 = AGESA_SUCCESS |
| ///< 0x1 = AGESA_UNSUPPORTED |
| ///< 0x2 = AGESA_BOUNDS_CHK |
| ///< 0x3 = AGESA_ALERT |
| ///< 0x4 = AGESA_WARNING |
| ///< 0x5 = AGESA_ERROR |
| ///< 0x6 = AGESA_CRITICAL |
| ///< 0x7 = AGESA_FATAL |
| ///< |
| OUT BOOLEAN ErrStatus[EsbEOL]; ///< Error Status bit Field |
| ///< |
| OUT BOOLEAN Status[SbEOL]; ///< Status bit Field |
| ///< |
| OUT UINT32 NodeMemSize; ///< Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node. |
| ///< |
| OUT UINT32 NodeSysBase; ///< Base[47:16] (system address) DRAM base address of this Node. |
| ///< |
| OUT UINT32 NodeHoleBase; ///< If not zero, Base[47:16] (system address) of dram hole for HW remapping. Dram hole exists on this Node |
| ///< |
| OUT UINT32 NodeSysLimit; ///< Base[47:16] (system address) DRAM limit address of this Node. |
| ///< |
| OUT UINT32 DimmPresent; ///< For each bit n 0..7, 1 = DIMM n is present. |
| ///< DIMM# Select Signal |
| ///< 0 MA0_CS_L[0, 1] |
| ///< 1 MB0_CS_L[0, 1] |
| ///< 2 MA1_CS_L[0, 1] |
| ///< 3 MB1_CS_L[0, 1] |
| ///< 4 MA2_CS_L[0, 1] |
| ///< 5 MB2_CS_L[0, 1] |
| ///< 6 MA3_CS_L[0, 1] |
| ///< 7 MB3_CS_L[0, 1] |
| ///< |
| OUT UINT32 DimmValid; ///< For each bit n 0..7, 1 = DIMM n is valid and is / will be configured |
| OUT UINT32 RegDimmPresent; ///< For each bit n 0..7, 1 = DIMM n is registered DIMM |
| OUT UINT32 LrDimmPresent; ///< For each bit n 0..7, 1 = DIMM n is Load Reduced DIMM |
| OUT UINT32 DimmEccPresent; ///< For each bit n 0..7, 1 = DIMM n is ECC capable. |
| OUT UINT32 DimmParPresent; ///< For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable. |
| ///< |
| OUT UINT16 DimmTrainFail; ///< Bitmap showing which dimms failed training |
| OUT UINT16 ChannelTrainFail; ///< Bitmap showing the channel information about failed Chip Selects |
| ///< 0 in any bit field indicates Channel 0 |
| ///< 1 in any bit field indicates Channel 1 |
| OUT UINT8 Dct; ///< Need to be removed |
| ///< DCT pointer |
| OUT BOOLEAN GangedMode; ///< Ganged mode |
| ///< 0 = disabled |
| ///< 1 = enabled |
| OUT CPU_LOGICAL_ID LogicalCpuid; ///< The logical CPUID of the node |
| ///< |
| OUT UINT16 HostBiosSrvc1; ///< UINT16 sized general purpose field for use by host BIOS. Scratch space. |
| ///< |
| OUT UINT32 HostBiosSrvc2; ///< UINT32 sized general purpose field for use by host BIOS. Scratch space. |
| ///< |
| OUT UINT8 MLoad; ///< Need to be removed |
| ///< Number of devices loading MAA bus |
| ///< |
| OUT UINT8 MaxAsyncLat; ///< Legacy wrapper |
| ///< |
| OUT UINT8 ChbD3Rcvrdly; ///< Legacy wrapper |
| ///< |
| OUT UINT16 ChaMaxRdLat; ///< Max Read Latency (ns) for DCT 0 |
| ///< |
| OUT UINT8 ChbD3BcRcvrdly; ///< CHB DIMM 3 Check UINT8 Receiver Enable Delay |
| |
| OUT DCT_STRUCT *DctData; ///< Pointed to a dynamically allocated array of DCT_STRUCTs |
| OUT UINT8 DctCount; ///< Number of DCTs per this Die |
| OUT UINT8 Reserved[16]; ///< Reserved |
| } DIE_STRUCT; |
| |
| /********************************************************************** |
| * S3 Support structure |
| **********************************************************************/ |
| /// AmdInitResume, AmdS3LateRestore, and AmdS3Save param structure |
| typedef struct { |
| OUT UINT32 Signature; ///< "ASTR" for AMD Suspend-To-RAM |
| OUT UINT16 Version; ///< S3 Params version number |
| IN OUT UINT32 Flags; ///< Indicates operation |
| IN OUT VOID *NvStorage; ///< Pointer to memory critical save state data |
| IN OUT UINT32 NvStorageSize; ///< Size in bytes of the NvStorage region |
| IN OUT VOID *VolatileStorage; ///< Pointer to remaining AMD save state data |
| IN OUT UINT32 VolatileStorageSize; ///< Size in bytes of the VolatileStorage region |
| } AMD_S3_PARAMS; |
| |
| ///=============================================================================== |
| /// MEM_PARAMETER_STRUCT |
| /// This data structure is used to pass wrapper parameters to the memory configuration code |
| /// |
| typedef struct _MEM_PARAMETER_STRUCT { |
| |
| // Basic (Return parameters) |
| // (This section contains the outbound parameters from the memory init code) |
| |
| OUT BOOLEAN GStatus[GsbEOL]; ///< Global Status bitfield. |
| ///< |
| OUT UINT32 HoleBase; ///< If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping. |
| ///< |
| OUT UINT32 Sub4GCacheTop; ///< If not zero, the 32-bit top of cacheable memory. |
| ///< |
| OUT UINT32 Sub1THoleBase; ///< If not zero Base[47:16] (system address) of sub 1TB dram hole. |
| ///< |
| OUT UINT32 SysLimit; ///< Limit[47:16] (system address). |
| ///< |
| OUT DIMM_VOLTAGE DDR3Voltage; ///< Find support voltage and send back to platform BIOS. |
| ///< |
| OUT UINT8 ExternalVrefValue; ///< Target reference voltage for external Vref for 2D training |
| ///< |
| OUT struct _MEM_DATA_STRUCT *MemData; ///< Access to global memory init data. |
| |
| // Advanced (Optional parameters) |
| // Optional (all defaults values will be initialized by the |
| // 'AmdMemInitDataStructDef' based on AMD defaults. It is up |
| // to the IBV/OEM to change the defaults after initialization |
| // but prior to the main entry to the memory code): |
| |
| // Memory Map/Mgt. |
| |
| IN UINT16 BottomIo; ///< Bottom of 32-bit IO space (8-bits). |
| ///< NV_BOTTOM_IO[7:0]=Addr[31:24] |
| ///< |
| IN BOOLEAN MemHoleRemapping; ///< Memory Hole Remapping (1-bit). |
| ///< FALSE = disable |
| ///< TRUE = enable |
| ///< |
| IN BOOLEAN LimitMemoryToBelow1Tb;///< Limit memory address space to below 1 TB |
| ///< FALSE = disable |
| ///< TRUE = enable |
| ///< |
| ///< @BldCfgItem{BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB} |
| |
| |
| // Dram Timing |
| |
| IN UINT32 UserTimingMode; ///< User Memclock Mode. |
| ///< @BldCfgItem{BLDCFG_TIMING_MODE_SELECT} |
| |
| IN UINT32 MemClockValue; ///< Memory Clock Value. |
| ///< @BldCfgItem{BLDCFG_MEMORY_CLOCK_SELECT} |
| |
| |
| // Dram Configuration |
| |
| IN BOOLEAN EnableBankIntlv; ///< Dram Bank (chip-select) Interleaving (1-bit). |
| ///< - FALSE =disable (default) |
| ///< - TRUE = enable |
| ///< |
| ///< @BldCfgItem{BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING} |
| |
| IN BOOLEAN EnableNodeIntlv; ///< Node Memory Interleaving (1-bit). |
| ///< - FALSE = disable (default) |
| ///< - TRUE = enable |
| ///< |
| ///< @BldCfgItem{BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING} |
| |
| IN BOOLEAN EnableChannelIntlv; ///< Channel Interleaving (1-bit). |
| ///< - FALSE = disable (default) |
| ///< - TRUE = enable |
| ///< |
| ///< @BldCfgItem{BLDCFG_MEMORY_CHANNEL_INTERLEAVING} |
| // ECC |
| |
| IN BOOLEAN EnableEccFeature; ///< enable ECC error to go into MCE. |
| ///< - FALSE = disable (default) |
| ///< - TRUE = enable |
| ///< |
| ///< @BldCfgItem{BLDCFG_ENABLE_ECC_FEATURE} |
| // Dram Power |
| |
| IN BOOLEAN EnablePowerDown; ///< CKE based power down mode (1-bit). |
| ///< - FALSE =disable (default) |
| ///< - TRUE =enable |
| ///< |
| ///< @BldCfgItem{BLDCFG_MEMORY_POWER_DOWN} |
| |
| // Online Spare |
| |
| IN BOOLEAN EnableOnLineSpareCtl; ///< Chip Select Spare Control bit 0. |
| ///< - FALSE = disable Spare (default) |
| ///< - TRUE = enable Spare |
| ///< |
| ///< @BldCfgItem{BLDCFG_ONLINE_SPARE} |
| |
| IN UINT8 *TableBasedAlterations; ///< Desired modifications to register settings. |
| |
| IN PSO_TABLE *PlatformMemoryConfiguration; |
| ///< A table that contains platform specific settings. |
| ///< For example, MemClk routing, the number of DIMM slots per channel, .... |
| ///< AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that |
| ///< contains default conservative settings. Platform BIOS can either tweak |
| ///< DefaultPlatformMemoryConfiguration or reassign this pointer to its own table. |
| ///< |
| IN BOOLEAN EnableParity; ///< Parity control. |
| ///< - TRUE = enable |
| ///< - FALSE = disable (default) |
| ///< |
| ///< @BldCfgItem{BLDCFG_MEMORY_PARITY_ENABLE} |
| |
| IN BOOLEAN EnableBankSwizzle; ///< BankSwizzle control. |
| ///< - FALSE = disable |
| ///< - TRUE = enable (default) |
| ///< |
| ///< @BldCfgItem{BLDCFG_BANK_SWIZZLE} |
| |
| ///< |
| |
| IN BOOLEAN EnableMemClr; ///< Memory Clear functionality control. |
| ///< - FALSE = disable |
| ///< - TRUE = enable (default) |
| ///< |
| |
| // Uma Configuration |
| |
| IN UMA_MODE UmaMode; ///< Uma Mode |
| ///< 0 = None |
| ///< 1 = Specified |
| ///< 2 = Auto |
| IN OUT UINT32 UmaSize; ///< The size of shared graphics dram (16-bits) |
| ///< NV_UMA_Size[31:0]=Addr[47:16] |
| ///< |
| OUT UINT32 UmaBase; ///< The allocated Uma base address (32-bits) |
| ///< NV_UMA_Base[31:0]=Addr[47:16] |
| ///< |
| |
| /// Memory Restore Feature |
| |
| IN BOOLEAN MemRestoreCtl; ///< Memory context restore control |
| ///< FALSE = perform memory init as normal (AMD default) |
| ///< TRUE = restore memory context and skip training. This requires |
| ///< MemContext is valid before AmdInitPost |
| ///< |
| IN BOOLEAN SaveMemContextCtl; ///< Control switch to save memory context at the end of MemAuto |
| ///< TRUE = AGESA will setup MemContext block before exit AmdInitPost |
| ///< FALSE = AGESA will not setup MemContext block. Platform is |
| ///< expected to call S3Save later in POST if it wants to |
| ///< use memory context restore feature. |
| ///< |
| IN OUT AMD_S3_PARAMS MemContext; ///< Memory context block describes the data that platform needs to |
| ///< save and restore for memory context restore feature to work. |
| ///< It uses the subset of S3Save block to save/restore. Hence platform |
| ///< may save only S3 block and uses it for both S3 resume and |
| ///< memory context restore. |
| ///< - If MemRestoreCtl is TRUE, platform needs to pass in MemContext |
| ///< before AmdInitPost. |
| ///< - If SaveMemContextCtl is TRUE, platform needs to save MemContext |
| ///< right after AmdInitPost. |
| ///< |
| IN BOOLEAN IsCapsuleMode; ///< Capsule reboot control |
| ///< FALSE = This is not a capsule reboot. |
| ///< TRUE = This is a capsule reboot. |
| ///< |
| IN BOOLEAN ExternalVrefCtl; ///< Control the use of external Vref |
| ///< TRUE = AGESA will use the function defined in "AGESA_EXTERNAL_VREF_CHANGE" in function list |
| ///< to change the vref |
| ///< FALSE = AGESA will will use the internal vref control. |
| ///< @BldCfgItem{BLDCFG_ENABLE_EXTERNAL_VREF_FEATURE} |
| ///< |
| IN FORCE_TRAIN_MODE ForceTrainMode; ///< Training Mode |
| ///< 0 = Force 1D Training for all configurations |
| ///< 1 = Force 2D Training for all configurations |
| ///< 2 = Auto - AGESA will control 1D or 2D |
| IN TECHNOLOGY_TYPE DimmTypeUsedInMixedConfig; ///< Select the preferred technology type that AGESA will enable |
| ///< when it is mixed with other technology types. |
| ///< DDR3_TECHNOLOGY = Use DDR3 DIMMs |
| ///< @BldCfgItem{BLDCFG_DIMM_TYPE_USED_IN_MIXED_CONFIG} |
| IN BOOLEAN AmpEnable; ///< AMP functionality control |
| ///< TRUE = Enable, platform BIOS requests to enable memory overclocking function, and AGESA |
| ///< detects if memory is capable of it |
| ///< FALSE = Disable, there is no request to enable memory overclocking function |
| ///< |
| IN BOOLEAN AmpWarningMsgEnable; ///< AMP warning messages control |
| ///< TRUE = Enable to log the warning messages of AMP |
| ///< FALSE = Disable |
| ///< |
| OUT AMP_STATUS AmpStatus; ///< AMP status allows platform BIOS to check which voltage or warning message it should |
| ///< use/apply. |
| ///< |
| ///< AmpVoltageValid : |
| ///< TRUE - AGESA does enable AMP function, so use AmpVoltage for voltage adjustment |
| ///< FALSE - AGESA does not enable AMP function, so use DDR3Voltage for voltage adjustment |
| ///< |
| ///< AmpSupportDetectedButNotEnabled : |
| ///< TRUE - Display warning message of "AMP support detected but not enabled" |
| ///< FALSE - No corresponding message should be displayed |
| ///< |
| ///< AmpSelectedButNotEnabled : |
| ///< TRUE - Display warning message of "AMP selected but not enabled" |
| ///< FALSE - No corresponding message should be displayed |
| ///< |
| ///< Note that both of warning message status reports are controlled by AmpWarningMsgEnable |
| ///< |
| OUT AMP_DIMM_VOLTAGE AmpVoltage; ///< AMP voltage which will be sent back to platform BIOS, and |
| ///< the value in AmpVoltage is valid only if AmpStatus is TRUE returned |
| IN BOOLEAN DataEyeEn; ///< Get 2D training data eye |
| ///< TRUE = Enable to get the 2D data eye |
| ///< FALSE = The 2D data eye is not enabled |
| ///< @BldCfgItem{BLDCFG_ENABLE_DATA_EYE} |
| IN BOOLEAN DramDoubleRefreshRate;///< Specify the average time between refresh requests to all DRAM devices. |
| ///< TRUE = 2x refresh rate. |
| ///< FALSE = 1x refresh rate. |
| ///< @BldCfgItem{BLDCFG_DRAM_DOUBLE_REFRESH_RATE} |
| } MEM_PARAMETER_STRUCT; |
| |
| |
| /// |
| /// Function definition. |
| /// This data structure passes function pointers to the memory configuration code. |
| /// The wrapper can use this structure with customized versions. |
| /// |
| typedef struct _MEM_FUNCTION_STRUCT { |
| |
| // PUBLIC required Internal functions |
| |
| IN OUT BOOLEAN (*amdMemGetPsCfgU) ( VOID *pMemData); ///< Proc for Unbuffered DIMMs, platform specific |
| IN OUT BOOLEAN (*amdMemGetPsCfgR) (VOID *pMemData); ///< Proc for Registered DIMMs, platform specific |
| |
| // PUBLIC optional functions |
| |
| IN OUT VOID (*amdMemEccInit) (VOID *pMemData); ///< NB proc for ECC feature |
| IN OUT VOID (*amdMemChipSelectInterleaveInit) (VOID *pMemData); ///< NB proc for CS interleave feature |
| IN OUT VOID (*amdMemDctInterleavingInit) (VOID *pMemData); ///< NB proc for Channel interleave feature |
| IN OUT VOID (*amdMemMctInterleavingInit) (VOID *pMemData); ///< NB proc for Node interleave feature |
| IN OUT VOID (*amdMemParallelTraining) (VOID *pMemData); ///< NB proc for parallel training feature |
| IN OUT VOID (*amdMemEarlySampleSupport) (VOID *pMemData); ///< NB code for early sample support feature |
| IN OUT VOID (*amdMemMultiPartInitSupport) (VOID *pMemData); ///< NB code for 'multi-part' |
| IN OUT VOID (*amdMemOnlineSpareSupport) (VOID *pMemData); ///< NB code for On-Line Spare feature |
| IN OUT VOID (*amdMemUDimmInit) (VOID *pMemData); ///< NB code for UDIMMs |
| IN OUT VOID (*amdMemRDimmInit) (VOID *pMemData); ///< NB code for RDIMMs |
| IN OUT VOID (*amdMemLrDimmInit) (VOID *pMemData); ///< NB code for LRDIMMs |
| IN OUT UINT32 Reserved[100]; ///< Reserved for later function definition |
| } MEM_FUNCTION_STRUCT; |
| |
| /// |
| /// Socket Structure |
| /// |
| /// |
| typedef struct _MEM_SOCKET_STRUCT { |
| OUT VOID *ChannelPtr[MAX_CHANNELS_PER_SOCKET]; ///< Pointers to each channels training data |
| |
| OUT VOID *TimingsPtr[MAX_CHANNELS_PER_SOCKET]; ///< Pointers to each channels timing data |
| } MEM_SOCKET_STRUCT; |
| |
| /// |
| /// Contains all data relevant to Memory Initialization. |
| /// |
| typedef struct _MEM_DATA_STRUCT { |
| IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| |
| IN MEM_PARAMETER_STRUCT *ParameterListPtr; ///< List of input Parameters |
| |
| OUT MEM_FUNCTION_STRUCT FunctionList; ///< List of function Pointers |
| |
| IN OUT AGESA_STATUS (*GetPlatformCfg[MAX_PLATFORM_TYPES]) (struct _MEM_DATA_STRUCT *MemData, UINT8 SocketID, CH_DEF_STRUCT *CurrentChannel); ///< look-up platform info |
| |
| IN OUT BOOLEAN (*ErrorHandling)(struct _DIE_STRUCT *MCTPtr, UINT8 DCT, UINT16 ChipSelMask, AMD_CONFIG_PARAMS *StdHeader); ///< Error Handling |
| |
| |
| OUT MEM_SOCKET_STRUCT SocketList[MAX_SOCKETS_SUPPORTED]; ///< Socket list for memory code. |
| ///< SocketList is a shortcut for IBVs to retrieve training |
| ///< and timing data for each channel indexed by socket/channel, |
| ///< eliminating their need to parse die/dct/channel etc. |
| ///< It contains pointers to the populated data structures for |
| ///< each channel and skips the channel structures that are |
| ///< unpopulated. In the case of channels sharing the same DCT, |
| ///< the pTimings pointers will point to the same DCT Timing data. |
| |
| OUT DIE_STRUCT *DiesPerSystem; ///< Pointed to an array of DIE_STRUCTs |
| OUT UINT8 DieCount; ///< Number of MCTs in the system. |
| |
| IN SPD_DEF_STRUCT *SpdDataStructure; ///< Pointer to SPD Data structure |
| |
| IN OUT struct _PLATFORM_CONFIGURATION *PlatFormConfig; ///< Platform profile/build option config structure |
| |
| IN OUT BOOLEAN IsFlowControlSupported; ///< Indicates if flow control is supported |
| |
| OUT UINT32 TscRate; ///< The rate at which the TSC increments in megahertz. |
| |
| } MEM_DATA_STRUCT; |
| |
| /// |
| /// Uma Structure |
| /// |
| /// |
| typedef struct _UMA_INFO { |
| OUT UINT64 UmaBase; ///< UmaBase[63:0] = Addr[63:0] |
| OUT UINT32 UmaSize; ///< UmaSize[31:0] = Addr[31:0] |
| OUT UINT32 UmaAttributes; ///< Indicate the attribute of Uma |
| OUT UINT8 UmaMode; ///< Indicate the mode of Uma |
| OUT UINT16 MemClock; ///< Indicate memory running speed in MHz |
| OUT UINT8 MemType; ///< Indicate the DRAM technology type that is being used |
| OUT UINT8 Reserved[2]; ///< Reserved for future usage |
| } UMA_INFO; |
| |
| /// Bitfield for ID |
| typedef struct { |
| OUT UINT16 SocketId:8; ///< Socket ID |
| OUT UINT16 ModuleId:8; ///< Module ID |
| } ID_FIELD; |
| /// |
| /// Union for ID of socket and module that will be passed out in call out |
| /// |
| typedef union { |
| OUT ID_FIELD IdField; ///< Bitfield for ID |
| OUT UINT16 IdInformation; ///< ID information for call out |
| } ID_INFO; |
| |
| // AGESA MEMORY ERRORS |
| |
| // AGESA_SUCCESS memory events |
| #define MEM_EVENT_CAPSULE_IN_EFFECT 0x04013600ul ///< Capsule is in effect |
| #define MEM_EVENT_CONTEXT_RESTORE_IN_EFFECT 0x04023600ul ///< Context restore is in effect |
| |
| // AGESA_ALERT Memory Errors |
| #define MEM_ALERT_USER_TMG_MODE_OVERRULED 0x04010000ul ///< TIMING_MODE_SPECIFIC is requested but |
| ///< cannot be applied to current configurations. |
| #define MEM_ALERT_ORG_MISMATCH_DIMM 0x04010100ul ///< DIMM organization miss-match |
| #define MEM_ALERT_BK_INT_DIS 0x04010200ul ///< Bank interleaving disable for internal issue |
| |
| // AGESA_ERROR Memory Errors |
| #define MEM_ERROR_NO_DQS_POS_RD_WINDOW 0x04010300ul ///< No DQS Position window for RD DQS |
| #define MEM_ERROR_SMALL_DQS_POS_RD_WINDOW 0x04020300ul ///< Small DQS Position window for RD DQS |
| #define MEM_ERROR_NO_DQS_POS_WR_WINDOW 0x04030300ul ///< No DQS Position window for WR DQS |
| #define MEM_ERROR_SMALL_DQS_POS_WR_WINDOW 0x04040300ul ///< Small DQS Position window for WR DQS |
| #define MEM_ERROR_DIMM_SPARING_NOT_ENABLED 0x04010500ul ///< DIMM sparing has not been enabled for an internal issues |
| #define MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE 0x04050300ul ///< Receive Enable value is too large |
| #define MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW 0x04060300ul ///< There is no DQS receiver enable window |
| #define MEM_ERROR_DRAM_ENABLED_TIME_OUT 0x04010600ul ///< Time out when polling DramEnabled bit |
| #define MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT 0x04010700ul ///< Time out when polling DctAccessDone bit |
| #define MEM_ERROR_SEND_CTRL_WORD_TIME_OUT 0x04010800ul ///< Time out when polling SendCtrlWord bit |
| #define MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT 0x04010900ul ///< Time out when polling PrefDramTrainMode bit |
| #define MEM_ERROR_ENTER_SELF_REF_TIME_OUT 0x04010A00ul ///< Time out when polling EnterSelfRef bit |
| #define MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT 0x04010B00ul ///< Time out when polling FreqChgInProg bit |
| #define MEM_ERROR_EXIT_SELF_REF_TIME_OUT 0x04020A00ul ///< Time out when polling ExitSelfRef bit |
| #define MEM_ERROR_SEND_MRS_CMD_TIME_OUT 0x04010C00ul ///< Time out when polling SendMrsCmd bit |
| #define MEM_ERROR_SEND_ZQ_CMD_TIME_OUT 0x04010D00ul ///< Time out when polling SendZQCmd bit |
| #define MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT 0x04010E00ul ///< Time out when polling DctExtraAccessDone bit |
| #define MEM_ERROR_MEM_CLR_BUSY_TIME_OUT 0x04010F00ul ///< Time out when polling MemClrBusy bit |
| #define MEM_ERROR_MEM_CLEARED_TIME_OUT 0x04020F00ul ///< Time out when polling MemCleared bit |
| #define MEM_ERROR_FLUSH_WR_TIME_OUT 0x04011000ul ///< Time out when polling FlushWr bit |
| #define MEM_ERROR_NBPSTATE_TRANSITION_TIME_OUT 0x04012600ul ///< Time out when polling CurNBPstate bit |
| #define MEM_ERROR_MAX_LAT_NO_WINDOW 0x04070300ul ///< Fail to find pass during Max Rd Latency training |
| #define MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL 0x04080300ul ///< Fail to launch training code on an AP |
| #define MEM_ERROR_PARALLEL_TRAINING_TIME_OUT 0x04090300ul ///< Fail to finish parallel training |
| #define MEM_ERROR_NO_ADDRESS_MAPPING 0x04011100ul ///< No address mapping found for a dimm |
| #define MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT 0x040A0300ul ///< There is no DQS receiver enable window and the value is equal to the largest value |
| #define MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE 0x040B0300ul ///< Receive Enable value is too large and is 1 less than limit |
| #define MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR 0x04011200ul ///< SPD Checksum error for NV_SPDCHK_RESTRT |
| #define MEM_ERROR_NO_CHIPSELECT 0x04011300ul ///< No chipselects found |
| #define MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM 0x04011500ul ///< Unbuffered dimm is not supported at 333MHz |
| #define MEM_ERROR_WL_PRE_OUT_OF_RANGE 0x040C0300ul ///< Returned PRE value during write levelizzation was out of range |
| #define MEM_ERROR_NO_2D_RDDQS_WINDOW 0x040D0300ul ///< No 2D RdDqs Window |
| #define MEM_ERROR_NO_2D_RDDQS_HEIGHT 0x040E0300ul ///< No 2D RdDqs Height |
| #define MEM_ERROR_2D_DQS_ERROR 0x040F0300ul ///< 2d RdDqs Error |
| #define MEM_ERROR_INVALID_2D_RDDQS_VALUE 0x04022400ul ///< 2d RdDqs invalid value found |
| #define MEM_ERROR_2D_DQS_VREF_MARGIN_ERROR 0x04023400ul ///< 2d RdDqs Vef Margin error found |
| #define MEM_ERROR_LR_IBT_NOT_FOUND 0x04013500ul ///< No LR dimm IBT value is found |
| #define MEM_ERROR_MR0_NOT_FOUND 0x04023500ul ///< No MR0 value is found |
| #define MEM_ERROR_ODT_PATTERN_NOT_FOUND 0x04033500ul ///< No odt pattern value is found |
| #define MEM_ERROR_RC2_IBT_NOT_FOUND 0x04043500ul ///< No RC2 IBT value is found |
| #define MEM_ERROR_RC10_OP_SPEED_NOT_FOUND 0x04053500ul ///< No RC10 op speed is found |
| #define MEM_ERROR_RTT_NOT_FOUND 0x04063500ul ///< No RTT value is found |
| #define MEM_ERROR_P2D_NOT_FOUND 0x04073500ul ///< No 2D training config value is found |
| #define MEM_ERROR_SAO_NOT_FOUND 0x04083500ul ///< No slow access mode, Address timing and Output driver compensation value is found |
| #define MEM_ERROR_CLK_DIS_MAP_NOT_FOUND 0x04093500ul ///< No CLK disable map is found |
| #define MEM_ERROR_CKE_TRI_MAP_NOT_FOUND 0x040A3500ul ///< No CKE tristate map is found |
| #define MEM_ERROR_ODT_TRI_MAP_NOT_FOUND 0x040B3500ul ///< No ODT tristate map is found |
| #define MEM_ERROR_CS_TRI_MAP_NOT_FOUND 0x040C3500ul ///< No CS tristate map is found |
| #define MEM_ERROR_TRAINING_SEED_NOT_FOUND 0x040D3500ul ///< No training seed is found |
| #define MEM_ERROR_NO_2D_WRDAT_WINDOW 0x040D0400ul ///< No 2D WrDat Window |
| #define MEM_ERROR_NO_2D_WRDAT_HEIGHT 0x040E0400ul ///< No 2D WrDat Height |
| #define MEM_ERROR_2D_WRDAT_ERROR 0x040F0400ul ///< 2d WrDat Error |
| #define MEM_ERROR_INVALID_2D_WRDAT_VALUE 0x04100400ul ///< 2d WrDat invalid value found |
| #define MEM_ERROR_2D_WRDAT_VREF_MARGIN_ERROR 0x04110400ul ///< 2d WrDat Vef Margin error found |
| |
| // AGESA_WARNING Memory Errors |
| #define MEM_WARNING_UNSUPPORTED_QRDIMM 0x04011600ul ///< QR DIMMs detected but not supported |
| #define MEM_WARNING_UNSUPPORTED_UDIMM 0x04021600ul ///< U DIMMs detected but not supported |
| #define MEM_WARNING_UNSUPPORTED_SODIMM 0x04031600ul ///< SO-DIMMs detected but not supported |
| #define MEM_WARNING_UNSUPPORTED_X4DIMM 0x04041600ul ///< x4 DIMMs detected but not supported |
| #define MEM_WARNING_UNSUPPORTED_RDIMM 0x04051600ul ///< R DIMMs detected but not supported |
| #define MEM_WARNING_UNSUPPORTED_LRDIMM 0x04061600ul ///< LR DIMMs detected but not supported |
| #define MEM_WARNING_EMP_NOT_SUPPORTED 0x04011700ul ///< Processor is not capable for EMP |
| #define MEM_WARNING_EMP_CONFLICT 0x04021700ul ///< EMP cannot be enabled if channel interleaving, |
| #define MEM_WARNING_EMP_NOT_ENABLED 0x04031700ul ///< Memory size is not power of two. |
| #define MEM_WARNING_ECC_DIS 0x04041700ul ///< ECC has been disabled as a result of an internal issue |
| #define MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED 0x04011800ul ///< Performance has been enabled, but battery life is preferred. |
| ///< bank interleaving, or bank swizzle is enabled. |
| #define MEM_WARNING_NO_SPDTRC_FOUND 0x04011900ul ///< No Trc timing value found in SPD of a dimm. |
| #define MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED 0x04012000ul ///< Node Interleaveing Requested, but could not be enabled |
| #define MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED 0x04012100ul ///< Channel Interleaveing Requested, but could not be enabled |
| #define MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED 0x04012200ul ///< Bank Interleaveing Requested, but could not be enabled |
| #define MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED 0x04012300ul ///< Voltage 1.35 determined, but could not be supported |
| #define MEM_WARNING_INITIAL_DDR3VOLT_NONZERO 0x04012400ul ///< DDR3 voltage initial value is not 0 |
| #define MEM_WARNING_NO_COMMONLY_SUPPORTED_VDDIO 0x04012500ul ///< Cannot find a commonly supported VDDIO |
| #define MEM_WARNING_AMP_SUPPORT_DETECTED_BUT_NOT_ENABLED 0x04012900ul ///< AMP support detected but not enabled |
| #define MEM_WARNING_AMP_SELECTED_BUT_NOT_ENABLED 0x04022900ul ///< AMP selected but not enabled |
| |
| // AGESA_FATAL Memory Errors |
| #define MEM_ERROR_MINIMUM_MODE 0x04011A00ul ///< Running in minimum mode |
| #define MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM 0x04011B00ul ///< DIMM modules are miss-matched |
| #define MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM 0x04011C00ul ///< No DIMMs have been found |
| #define MEM_ERROR_MISMATCH_DIMM_CLOCKS 0x04011D00ul ///< DIMM clocks miss-matched |
| #define MEM_ERROR_NO_CYC_TIME 0x04011E00ul ///< No cycle time found |
| #define MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS 0x04011F00ul ///< Heap allocation error with dynamic storing of trained timings |
| #define MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs 0x04021F00ul ///< Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT |
| #define MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV 0x04031F00ul ///< Heap allocation error with REMOTE_TRAINING_ENV |
| #define MEM_ERROR_HEAP_ALLOCATE_FOR_SPD 0x04041F00ul ///< Heap allocation error for SPD data |
| #define MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA 0x04051F00ul ///< Heap allocation error for RECEIVED_DATA during parallel training |
| #define MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS 0x04061F00ul ///< Heap allocation error for S3 "SPECIAL_CASE_REGISTER" |
| #define MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA 0x04071F00ul ///< Heap allocation error for Training Data |
| #define MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK 0x04081F00ul ///< Heap allocation error for DIMM Identify "MEM_NB_BLOCK |
| #define MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM 0x04022300ul ///< No Constructor for DIMM Identify |
| #define MEM_ERROR_VDDIO_UNSUPPORTED 0x04022500ul ///< VDDIO of the dimms on the board is not supported |
| #define MEM_ERROR_HEAP_ALLOCATE_FOR_2D 0x040B1F00ul ///< Heap allocation error for 2D training data |
| #define MEM_ERROR_HEAP_DEALLOCATE_FOR_2D 0x040C1F00ul ///< Heap de-allocation error for 2D training data |
| #define MEM_ERROR_HEAP_ALLOCATE_FOR_DATAEYE 0x040F1F00ul ///< Heap allocation error for DATAEYE Storage |
| #define MEM_ERROR_HEAP_DEALLOCATE_FOR_DATAEYE 0x040E1F00ul ///< Heap de-allocation error for DATAEYE Storage |
| |
| // AGESA_CRITICAL Memory Errors |
| #define MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3 0x04091F00ul ///< Heap allocation error for DMI table for DDR3 |
| #define MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2 0x040A1F00ul ///< Heap allocation error for DMI table for DDR2 |
| #define MEM_ERROR_UNSUPPORTED_DIMM_CONFIG 0x04011400ul ///< Dimm population is not supported |
| #define MEM_ERROR_HEAP_ALLOCATE_FOR_CRAT_MEM_AFFINITY 0x040D1F00ul ///< Heap allocation error for CRAT memory affinity info |
| |
| |
| |
| /*---------------------------------------------------------------------------- |
| * |
| * END OF MEMORY-SPECIFIC DATA STRUCTURES |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| |
| |
| |
| /*---------------------------------------------------------------------------- |
| * |
| * CPU RELATED DEFINITIONS |
| * |
| *---------------------------------------------------------------------------- |
| */ |
| |
| // CPU Event definitions. |
| |
| // Defines used to filter CPU events based on functional blocks |
| #define CPU_EVENT_PM_EVENT_MASK 0xFF00FF00ul |
| #define CPU_EVENT_PM_EVENT_CLASS 0x08000400ul |
| |
| //================================================================ |
| // CPU General events |
| // Heap allocation (AppFunction = 01h) |
| #define CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT 0x08000100ul |
| #define CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED 0x08010100ul |
| #define CPU_ERROR_HEAP_IS_FULL 0x08020100ul |
| #define CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED 0x08030100ul |
| #define CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT 0x08040100ul |
| // BrandId (AppFunction = 02h) |
| #define CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE 0x08000200ul |
| // Micro code patch (AppFunction = 03h) |
| #define CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED 0x08000300ul |
| // Power management (AppFunction = 04h) |
| #define CPU_EVENT_PM_PSTATE_OVERCURRENT 0x08000400ul |
| #define CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT 0x08010400ul |
| #define CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE 0x08020400ul |
| #define CPU_ERROR_PM_NB_PSTATE_MISMATCH 0x08030400ul |
| // TDP Limiting |
| #define CPU_EVENT_TDP_LIMIT_FORCE_TO_50_PERCENTAGE 0x08060100ul |
| #define CPU_ERROR_TDP_LIMIT_SAVE_PSTATE_FAIL 0x08060200ul |
| #define CPU_ERROR_TDP_LIMIT_RESTORE_PSTATE_FAIL 0x08060201ul |
| #define CPU_ERROR_TDP_LIMIT_TDP2WATT_IS_ZERO 0x08060202ul |
| #define CPU_ERROR_TDP_LIMIT_INVALID_INPUT 0x08060203ul |
| // Other CPU events (AppFunction = 05h) |
| #define CPU_EVENT_BIST_ERROR 0x08000500ul |
| #define CPU_EVENT_UNKNOWN_PROCESSOR_FAMILY 0x08010500ul |
| #define CPU_EVENT_STACK_REENTRY 0x08020500ul |
| #define CPU_EVENT_CORE_NOT_IDENTIFIED 0x08030500ul |
| |
| //================================================================= |
| // CPU Feature events |
| // Execution cache (AppFunction = 21h) |
| // AGESA_CACHE_SIZE_REDUCED 2101 |
| // AGESA_CACHE_REGIONS_ACROSS_1MB 2102 |
| // AGESA_CACHE_REGIONS_ACROSS_4GB 2103 |
| // AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 2104 |
| // AGESA_CACHE_START_ADDRESS_LESS_D0000 2105 |
| // AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 2106 |
| // AGESA_DEALLOCATE_CACHE_REGIONS 2107 |
| #define CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR 0x08002100ul |
| // Core Leveling (AppFunction = 22h) |
| #define CPU_WARNING_ADJUSTED_LEVELING_MODE 0x08002200ul |
| // HT Assist (AppFunction = 23h) |
| #define CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG 0x08002300ul |
| // SCS initialization (AppFunction = 24h) |
| // AGESA_SCS_HEAP_ENTRY_MISSING 2401 |
| // AGESA_SCS_BUFFER_EMPTY 2402 |
| // AGESA_SCS_WEIGHTS_MISMATCH 2403 |
| #define CPU_EVENT_SCS_INITIALIZATION_ERROR 0x08002400ul |
| |
| // CPU Build Configuration structures and definitions |
| |
| /// Build Configuration structure for BLDCFG_AP_MTRR_SETTINGS |
| typedef struct { |
| IN UINT32 MsrAddr; ///< Fixed-Sized MTRR address |
| IN UINT64 MsrData; ///< MTRR Settings |
| } AP_MTRR_SETTINGS; |
| |
| #define AMD_AP_MTRR_FIX64k_00000 0x00000250ul |
| #define AMD_AP_MTRR_FIX16k_80000 0x00000258ul |
| #define AMD_AP_MTRR_FIX16k_A0000 0x00000259ul |
| #define AMD_AP_MTRR_FIX4k_C0000 0x00000268ul |
| #define AMD_AP_MTRR_FIX4k_C8000 0x00000269ul |
| #define AMD_AP_MTRR_FIX4k_D0000 0x0000026Aul |
| #define AMD_AP_MTRR_FIX4k_D8000 0x0000026Bul |
| #define AMD_AP_MTRR_FIX4k_E0000 0x0000026Cul |
| #define AMD_AP_MTRR_FIX4k_E8000 0x0000026Dul |
| #define AMD_AP_MTRR_FIX4k_F0000 0x0000026Eul |
| #define AMD_AP_MTRR_FIX4k_F8000 0x0000026Ful |
| #define CPU_LIST_TERMINAL 0xFFFFFFFFul |
| |
| /// Data structure for the Mapping Item between Unified ID for IDS Setup Option |
| /// and the option value. |
| /// |
| typedef struct { |
| IN UINT16 IdsNvId; ///< Unified ID for IDS Setup Option. |
| OUT UINT16 IdsNvValue; ///< The value of IDS Setup Option. |
| } IDS_NV_ITEM; |
| |
| /// Data Structure for IDS CallOut Function |
| typedef struct { |
| IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN IDS_NV_ITEM *IdsNvPtr; ///< Memory Pointer of IDS NV Table |
| IN OUT UINTN Reserved; ///< reserved |
| } IDS_CALLOUT_STRUCT; |
| |
| /************************************************************************ |
| * |
| * AGESA interface Call-Out function parameter structures |
| * |
| ***********************************************************************/ |
| |
| /// Parameters structure for interface call-out AgesaAllocateBuffer |
| typedef struct { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN OUT UINT32 BufferLength; ///< Size of buffer to allocate |
| IN UINT32 BufferHandle; ///< Identifier or name for the buffer |
| OUT VOID *BufferPointer; ///< location of the created buffer |
| } AGESA_BUFFER_PARAMS; |
| |
| /// Parameters structure for interface call-out AgesaRunCodeOnAp |
| typedef struct { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN UINT32 FunctionNumber; ///< Index of the procedure to execute |
| IN VOID *RelatedDataBlock; ///< Location of data structure the procedure will use |
| IN UINT32 RelatedBlockLength; ///< Size of the related data block |
| } AP_EXE_PARAMS; |
| |
| /// Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery |
| typedef struct { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN UINT8 SocketId; ///< Address of SPD - socket ID |
| IN UINT8 MemChannelId; ///< Address of SPD - memory channel ID |
| IN UINT8 DimmId; ///< Address of SPD - DIMM ID |
| IN OUT UINT8 *Buffer; ///< Location where to place the SPD content |
| IN OUT MEM_DATA_STRUCT *MemData; ///< Location of the MemData structure, for reference |
| } AGESA_READ_SPD_PARAMS; |
| |
| /// VoltageType values |
| typedef enum { |
| VTYPE_CPU_VREF, ///< Cpu side Vref |
| VTYPE_DIMM_VREF, ///< Dimm Side Vref |
| VTYPE_VDDIO ///< Vddio |
| } VTYPE; |
| |
| /// Parameters structure for the interface call-out AgesaExternalVoltageAdjust |
| typedef struct _VOLTAGE_ADJUST { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN OUT MEM_DATA_STRUCT *MemData; ///< Location of the MemData structure, for reference |
| IN VTYPE VoltageType; ///< Which Voltage Type to adjust |
| IN INT8 AdjustValue; ///< Positive/Negative Adjust Value |
| } VOLTAGE_ADJUST; |
| |
| /// Buffer Handles |
| typedef enum { |
| AMD_DMI_INFO_BUFFER_HANDLE = 0x000D000, ///< Assign 0x000D000 buffer handle to DMI function |
| AMD_PSTATE_DATA_BUFFER_HANDLE, ///< Assign 0x000D001 buffer handle to Pstate data |
| AMD_PSTATE_ACPI_BUFFER_HANDLE, ///< Assign 0x000D002 buffer handle to Pstate table |
| AMD_BRAND_ID_BUFFER_HANDLE, ///< Assign 0x000D003 buffer handle to Brand ID |
| AMD_ACPI_SLIT_BUFFER_HANDLE, ///< Assign 0x000D004 buffer handle to SLIT function |
| AMD_SRAT_INFO_BUFFER_HANDLE, ///< Assign 0x000D005 buffer handle to SRAT function |
| AMD_WHEA_BUFFER_HANDLE, ///< Assign 0x000D006 buffer handle to WHEA function |
| AMD_S3_INFO_BUFFER_HANDLE, ///< Assign 0x000D007 buffer handle to S3 function |
| AMD_S3_NB_INFO_BUFFER_HANDLE, ///< Assign 0x000D008 buffer handle to S3 NB device info |
| AMD_ACPI_ALIB_BUFFER_HANDLE, ///< Assign 0x000D009 buffer handle to ALIB SSDT table |
| AMD_ACPI_IVRS_BUFFER_HANDLE, ///< Assign 0x000D00A buffer handle to IOMMU IVRS table |
| AMD_CRAT_INFO_BUFFER_HANDLE, ///< Assign 0x000D00B buffer handle to CRAT function |
| AMD_ACPI_CDIT_BUFFER_HANDLE ///< Assign 0x000D00C buffer handle to CDIT function |
| } AMD_BUFFER_HANDLE; |
| |
| |
| /************************************************************************ |
| * |
| * AGESA interface Call-Out function prototypes |
| * |
| ***********************************************************************/ |
| |
| VOID |
| AgesaDoReset ( |
| IN UINTN ResetType, |
| IN OUT AMD_CONFIG_PARAMS *StdHeader |
| ); |
| |
| AGESA_STATUS |
| AgesaAllocateBuffer ( |
| IN UINTN FcnData, |
| IN OUT AGESA_BUFFER_PARAMS *AllocParams |
| ); |
| |
| AGESA_STATUS |
| AgesaDeallocateBuffer ( |
| IN UINTN FcnData, |
| IN OUT AGESA_BUFFER_PARAMS *DeallocParams |
| ); |
| |
| AGESA_STATUS |
| AgesaLocateBuffer ( |
| IN UINTN FcnData, |
| IN OUT AGESA_BUFFER_PARAMS *LocateParams |
| ); |
| |
| AGESA_STATUS |
| AgesaReadSpd ( |
| IN UINTN FcnData, |
| IN OUT AGESA_READ_SPD_PARAMS *ReadSpd |
| ); |
| |
| AGESA_STATUS |
| AgesaReadSpdRecovery ( |
| IN UINTN FcnData, |
| IN OUT AGESA_READ_SPD_PARAMS *ReadSpd |
| ); |
| |
| AGESA_STATUS |
| AgesaHookBeforeDramInitRecovery ( |
| IN UINTN FcnData, |
| IN OUT MEM_DATA_STRUCT *MemData |
| ); |
| |
| AGESA_STATUS |
| AgesaRunFcnOnAp ( |
| IN UINTN ApicIdOfCore, |
| IN AP_EXE_PARAMS *LaunchApParams |
| ); |
| |
| AGESA_STATUS |
| AgesaHookBeforeDramInit ( |
| IN UINTN SocketIdModuleId, |
| IN OUT MEM_DATA_STRUCT *MemData |
| ); |
| |
| AGESA_STATUS |
| AgesaHookBeforeDQSTraining ( |
| IN UINTN SocketIdModuleId, |
| IN OUT MEM_DATA_STRUCT *MemData |
| ); |
| |
| AGESA_STATUS |
| AgesaHookBeforeExitSelfRefresh ( |
| IN UINTN FcnData, |
| IN OUT MEM_DATA_STRUCT *MemData |
| ); |
| |
| AGESA_STATUS |
| AgesaPcieSlotResetControl ( |
| IN UINTN FcnData, |
| IN PCIe_SLOT_RESET_INFO *ResetInfo |
| ); |
| |
| AGESA_STATUS |
| AgesaGetVbiosImage ( |
| IN UINTN FcnData, |
| IN OUT GFX_VBIOS_IMAGE_INFO *VbiosImageInfo |
| ); |
| |
| AGESA_STATUS |
| AgesaFchOemCallout ( |
| IN VOID *FchData |
| ); |
| |
| AGESA_STATUS |
| AgesaExternal2dTrainVrefChange ( |
| IN UINTN SocketIdModuleId, |
| IN OUT MEM_DATA_STRUCT *MemData |
| ); |
| |
| AGESA_STATUS |
| AgesaGetIdsData ( |
| IN UINTN Data, |
| IN OUT IDS_CALLOUT_STRUCT *IdsCalloutData |
| ); |
| |
| AGESA_STATUS |
| AgesaExternalVoltageAdjust ( |
| IN UINTN SocketIdModuleId, |
| IN OUT VOLTAGE_ADJUST *AdjustValue |
| ); |
| /************************************************************************ |
| * |
| * AGESA interface structure definition and function prototypes |
| * |
| ***********************************************************************/ |
| |
| /********************************************************************** |
| * Platform Configuration: The parameters in boot branch function |
| **********************************************************************/ |
| |
| /// The possible platform control flow settings. |
| typedef enum { |
| Nfcm, ///< Normal Flow Control Mode. |
| UmaDr, ///< UMA using Display Refresh flow control. |
| UmaIfcm, ///< UMA using Isochronous Flow Control. |
| Ifcm, ///< Isochronous Flow Control Mode (other than for UMA). |
| Iommu, ///< An IOMMU is in use in the system. |
| MaxControlFlow ///< Not a control flow mode, use for limit checking. |
| } PLATFORM_CONTROL_FLOW; |
| |
| /// Platform Deemphasis Levels. |
| /// |
| /// The deemphasis level is set for the receiver, based on link characterization. The DCV level is |
| /// set based on the level of the far transmitter. |
| typedef enum { |
| DeemphasisLevelNone, ///< No Deemphasis. |
| DeemphasisLevelMinus3, ///< Minus 3 db deemphasis. |
| DeemphasisLevelMinus6, ///< Minus 6 db deemphasis. |
| DeemphasisLevelMinus8, ///< Minus 8 db deemphasis. |
| DeemphasisLevelMinus11, ///< Minus 11 db deemphasis. |
| DeemphasisLevelMinus11pre8, ///< Minus 11, Minus 8 precursor db deemphasis. |
| DcvLevelNone = 16, ///< No DCV Deemphasis. |
| DcvLevelMinus2, ///< Minus 2 db DCV deemphasis. |
| DcvLevelMinus3, ///< Minus 3 db DCV deemphasis. |
| DcvLevelMinus5, ///< Minus 5 db DCV deemphasis. |
| DcvLevelMinus6, ///< Minus 6 db DCV deemphasis. |
| DcvLevelMinus7, ///< Minus 7 db DCV deemphasis. |
| DcvLevelMinus8, ///< Minus 8 db DCV deemphasis. |
| DcvLevelMinus9, ///< Minus 9 db DCV deemphasis. |
| DcvLevelMinus11, ///< Minus 11 db DCV deemphasis. |
| MaxPlatformDeemphasisLevel ///< Not a deemphasis level, use for limit checking. |
| } PLATFORM_DEEMPHASIS_LEVEL; |
| |
| /// Provide Deemphasis Levels for HT Links. |
| /// |
| /// For each CPU to CPU or CPU to IO device HT link, the list of Deemphasis Levels will |
| /// be checked for a match. The item matches for a Socket, Link if the link frequency is |
| /// is in the inclusive range HighFreq:LoFreq. |
| /// AGESA does not set deemphasis in IO devices, only in processors. |
| |
| typedef struct { |
| // Match fields |
| IN UINT8 Socket; ///< One Socket on which this Link is located |
| IN UINT8 Link; ///< The Link on this Processor. |
| IN UINT8 LoFreq; ///< If the link is set to this frequency or greater, apply these levels, and |
| IN UINT8 HighFreq; ///< If the link is set to this frequency or less, apply these levels. |
| // Value fields |
| IN PLATFORM_DEEMPHASIS_LEVEL ReceiverDeemphasis; ///< The deemphasis level for this link |
| IN PLATFORM_DEEMPHASIS_LEVEL DcvDeemphasis; ///< The DCV, or far transmitter deemphasis level. |
| } CPU_HT_DEEMPHASIS_LEVEL; |
| |
| |
| /// The possible hardware prefetch mode settings. |
| typedef enum { |
| HARDWARE_PREFETCHER_AUTO, ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled. |
| DISABLE_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES, ///< Use the recommended setting for the hardware prefetcher, but disable training on software prefetches. |
| DISABLE_L1_PREFETCHER, ///< Use the recommended settings for the hardware prefetcher, but disable L1 prefetching and above. |
| DISABLE_L1_PREFETCHER_AND_HW_PREFETCHER_TRAINING_ON_SOFTWARE_PREFETCHES, ///< (deprecated) - This setting is deprecated; it has the same effect as DISABLE_L1_PREFETCHER |
| DISABLE_L2_STRIDE_PREFETCHER, ///< Use the recommended settings for the hardware prefetcher, but disable the L2 stride prefetcher and above |
| DISABLE_HARDWARE_PREFETCH, ///< Disable hardware prefetching. |
| MAX_HARDWARE_PREFETCH_MODE ///< Not a hardware prefetch mode, use for limit checking. |
| } HARDWARE_PREFETCH_MODE; |
| |
| /// The possible software prefetch mode settings. |
| typedef enum { |
| SOFTWARE_PREFETCHES_AUTO, ///< Use the recommended setting for the processor. In most cases, the recommended setting is enabled. |
| DISABLE_SOFTWARE_PREFETCHES, ///< Disable software prefetches (convert software prefetch instructions to NOP). |
| MAX_SOFTWARE_PREFETCH_MODE ///< Not a software prefetch mode, use for limit checking. |
| } SOFTWARE_PREFETCH_MODE; |
| |
| /// Advanced performance tunings, prefetchers. |
| /// These settings provide for performance tuning to optimize for specific workloads. |
| typedef struct { |
| IN HARDWARE_PREFETCH_MODE HardwarePrefetchMode; ///< This value provides for advanced performance tuning by controlling the hardware prefetcher setting. |
| IN SOFTWARE_PREFETCH_MODE SoftwarePrefetchMode; ///< This value provides for advanced performance tuning by controlling the software prefetch instructions. |
| IN DRAM_PREFETCH_MODE DramPrefetchMode; ///< This value provides for advanced performance tuning by controlling the DRAM prefetcher setting. |
| } ADVANCED_PERFORMANCE_PROFILE; |
| |
| /// The possible platform power policy settings. |
| typedef enum { |
| Performance, ///< Optimize for performance. |
| BatteryLife, ///< Optimize for battery life. |
| MaxPowerPolicy ///< Not a power policy mode, use for limit checking. |
| } PLATFORM_POWER_POLICY; |
| |
| /// Platform performance settings for optimized settings. |
| /// Several configuration settings for the processor depend upon other parts and |
| /// general designer choices for the system. The determination of these data points |
| /// is not standard for all platforms, so the host environment needs to provide these |
| /// to specify how the system is to be configured. |
| typedef struct { |
| IN PLATFORM_CONTROL_FLOW PlatformControlFlowMode; ///< The platform's control flow mode for optimum platform performance. |
| ///< @BldCfgItem{BLDCFG_PLATFORM_CONTROL_FLOW_MODE} |
| IN BOOLEAN UseHtAssist; ///< HyperTransport link traffic optimization. |
| ///< @BldCfgItem{BLDCFG_USE_HT_ASSIST} |
| IN BOOLEAN UseAtmMode; ///< HyperTransport link traffic optimization. |
| ///< @BldCfgItem{BLDCFG_USE_ATM_MODE} |
| IN BOOLEAN UseNeighborCache; ///< Neighbor cache mode. |
| ///< @BldCfgItem{BLDCFG_USE_NEIGHBOR_CACHE} |
| IN BOOLEAN Use32ByteRefresh; ///< Display Refresh traffic generates 32 byte requests. |
| ///< @BldCfgItem{BLDCFG_USE_32_BYTE_REFRESH} |
| IN BOOLEAN UseVariableMctIsocPriority; ///< The Memory controller will be set to Variable Isoc Priority. |
| ///< @BldCfgItem{BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY} |
| IN ADVANCED_PERFORMANCE_PROFILE AdvancedPerformanceProfile; ///< The advanced platform performance settings. |
| IN PLATFORM_POWER_POLICY PlatformPowerPolicy; ///< The platform's desired power policy |
| ///< @BldCfgItem{BLDCFG_PLATFORM_POWER_POLICY_MODE} |
| IN BOOLEAN NbPstatesSupported; ///< The Nb-Pstates is supported or not |
| ///< @BldCfgItem{BLDCFG_NB_PSTATES_SUPPORTED} |
| } PERFORMANCE_PROFILE; |
| |
| /// Platform settings that describe the voltage regulator modules of the system. |
| /// Many power management settings are dependent upon the characteristics of the |
| /// on-board voltage regulator module (VRM). The host environment needs to provide |
| /// these to specify how the system is to be configured. |
| typedef struct { |
| IN UINT32 CurrentLimit; ///< Vrm Current Limit. |
| ///< @BldCfgItem{BLDCFG_VRM_CURRENT_LIMIT} |
| ///< @BldCfgItem{BLDCFG_VRM_NB_CURRENT_LIMIT} |
| IN UINT32 LowPowerThreshold; ///< Vrm Low Power Threshold. |
| ///< @BldCfgItem{BLDCFG_VRM_LOW_POWER_THRESHOLD} |
| ///< @BldCfgItem{BLDCFG_VRM_NB_LOW_POWER_THRESHOLD} |
| IN UINT32 SlewRate; ///< Vrm Slew Rate. |
| ///< @BldCfgItem{BLDCFG_VRM_SLEW_RATE} |
| ///< @BldCfgItem{BLDCFG_VRM_NB_SLEW_RATE} |
| IN BOOLEAN HiSpeedEnable; ///< Select high speed VRM. |
| ///< @BldCfgItem{BLDCFG_VRM_HIGH_SPEED_ENABLE} |
| ///< @BldCfgItem{BLDCFG_VRM_NB_HIGH_SPEED_ENABLE} |
| IN UINT32 MaximumCurrentLimit; ///< Vrm Maximum Current Limit. |
| ///< @BldCfgItem{BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT} |
| ///< @BldCfgItem{BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT} |
| IN UINT32 SviOcpLevel; ///< SVI OCP Level. |
| ///< @BldCfgItem{BLDCFG_VRM_SVI_OCP_LEVEL} |
| ///< @BldCfgItem{BLDCFG_VRM_NB_SVI_OCP_LEVEL} |
| } PLATFORM_VRM_CONFIGURATION; |
| |
| /// The VRM types to characterize. |
| typedef enum { |
| CoreVrm, ///< VDD plane. |
| NbVrm, ///< VDDNB plane. |
| MaxVrmType ///< Not a valid VRM type, use for limit checking. |
| } PLATFORM_VRM_TYPE; |
| |
| |
| /// FCH Platform Configuration Policy |
| typedef struct { |
| IN UINT16 CfgSmbus0BaseAddress; ///< SMBUS0 Controller Base Address |
| IN UINT16 CfgSmbus1BaseAddress; ///< SMBUS1 Controller Base Address |
| IN UINT16 CfgSioPmeBaseAddress; ///< I/O base address for LPC I/O target range |
| IN UINT16 CfgAcpiPm1EvtBlkAddr; ///< I/O base address of ACPI power management Event Block |
| IN UINT16 CfgAcpiPm1CntBlkAddr; ///< I/O base address of ACPI power management Control Block |
| IN UINT16 CfgAcpiPmTmrBlkAddr; ///< I/O base address of ACPI power management Timer Block |
| IN UINT16 CfgCpuControlBlkAddr; ///< I/O base address of ACPI power management CPU Control Block |
| IN UINT16 CfgAcpiGpe0BlkAddr; ///< I/O base address of ACPI power management General Purpose Event Block |
| IN UINT16 CfgSmiCmdPortAddr; ///< I/O base address of ACPI SMI Command Block |
| IN UINT16 CfgAcpiPmaCntBlkAddr; ///< I/O base address of ACPI power management additional control block |
| IN UINT32 CfgGecShadowRomBase; ///< 32-bit base address to the GEC shadow ROM |
| IN UINT32 CfgWatchDogTimerBase; ///< Watchdog Timer base address |
| IN UINT32 CfgSpiRomBaseAddress; ///< Base address for the SPI ROM controller |
| IN UINT32 CfgHpetBaseAddress; ///< HPET MMIO base address |
| IN UINT32 CfgAzaliaSsid; |
| IN UINT32 CfgSmbusSsid; ///< Subsystem ID of SMBUS controller |
| IN UINT32 CfgIdeSsid; ///< Subsystem ID of IDE controller |
| IN UINT32 CfgSataAhciSsid; ///< Subsystem ID of SATA controller in AHCI mode |
| IN UINT32 CfgSataIdeSsid; ///< Subsystem ID of SATA controller in IDE mode |
| IN UINT32 CfgSataRaid5Ssid; ///< Subsystem ID of SATA controller in RAID5 mode |
| IN UINT32 CfgSataRaidSsid; ///< Subsystem ID of SATA controller in RAID mode |
| IN UINT32 CfgEhciSsid; ///< Subsystem ID of EHCI |
| IN UINT32 CfgOhciSsid; ///< Subsystem ID of OHCI |
| IN UINT32 CfgLpcSsid; ///< Subsystem ID of LPC ISA Bridge |
| IN UINT32 CfgSdSsid; ///< Subsystem ID of SecureDigital controller |
| IN UINT32 CfgXhciSsid; ///< Subsystem ID of XHCI |
| IN BOOLEAN CfgFchPort80BehindPcib; ///< Is port80 cycle going to the PCI bridge |
| IN BOOLEAN CfgFchEnableAcpiSleepTrap; ///< ACPI sleep SMI enable/disable |
| IN GPP_LINKMODE CfgFchGppLinkConfig; ///< GPP link configuration |
| IN BOOLEAN CfgFchGppPort0Present; ///< Is FCH GPP port 0 present |
| IN BOOLEAN CfgFchGppPort1Present; ///< Is FCH GPP port 1 present |
| IN BOOLEAN CfgFchGppPort2Present; ///< Is FCH GPP port 2 present |
| IN BOOLEAN CfgFchGppPort3Present; ///< Is FCH GPP port 3 present |
| IN BOOLEAN CfgFchGppPort0HotPlug; ///< Is FCH GPP port 0 hotplug capable |
| IN BOOLEAN CfgFchGppPort1HotPlug; ///< Is FCH GPP port 1 hotplug capable |
| IN BOOLEAN CfgFchGppPort2HotPlug; ///< Is FCH GPP port 2 hotplug capable |
| IN BOOLEAN CfgFchGppPort3HotPlug; ///< Is FCH GPP port 3 hotplug capable |
| |
| IN UINT8 CfgFchEsataPortBitMap; ///< ESATA Port definition, eg: [0]=1, means port 0 is ESATA capable |
| IN UINT8 CfgFchIrPinControl; ///< Register bitfield describing Infrared Pin Control: |
| ///< [0] - IR Enable 0 |
| ///< [1] - IR Enable 1 |
| ///< [2] - IR Tx0 |
| ///< [3] - IR Tx1 |
| ///< [4] - IR Open Drain |
| ///< [5] - IR Enable LED |
| IN SD_CLOCK_CONTROL CfgFchSdClockControl; ///< FCH SD Clock Control |
| IN SCI_MAP_CONTROL *CfgFchSciMapControl; ///< FCH SCI Mapping Control |
| IN SATA_PHY_CONTROL *CfgFchSataPhyControl; ///< FCH SATA PHY Control |
| IN GPIO_CONTROL *CfgFchGpioControl; ///< FCH GPIO Control |
| IN BOOLEAN CfgFchRtcWorkAround; ///< FCH RTC Workaround |
| } FCH_PLATFORM_POLICY; |
| |
| |
| /// Build Option/Configuration Boolean Structure. |
| typedef struct { |
| IN AMD_CODE_HEADER VersionString; ///< AMD embedded code version string |
| |
| //Build Option Area |
| IN BOOLEAN OptionUDimms; ///< @ref BLDOPT_REMOVE_UDIMMS_SUPPORT "BLDOPT_REMOVE_UDIMMS_SUPPORT" |
| IN BOOLEAN OptionRDimms; ///< @ref BLDOPT_REMOVE_RDIMMS_SUPPORT "BLDOPT_REMOVE_RDIMMS_SUPPORT" |
| IN BOOLEAN OptionLrDimms; ///< @ref BLDOPT_REMOVE_LRDIMMS_SUPPORT "BLDOPT_REMOVE_LRDIMMS_SUPPORT" |
| IN BOOLEAN OptionEcc; ///< @ref BLDOPT_REMOVE_ECC_SUPPORT "BLDOPT_REMOVE_ECC_SUPPORT" |
| IN BOOLEAN OptionBankInterleave; ///< @ref BLDOPT_REMOVE_BANK_INTERLEAVE "BLDOPT_REMOVE_BANK_INTERLEAVE" |
| IN BOOLEAN OptionDctInterleave; ///< @ref BLDOPT_REMOVE_DCT_INTERLEAVE "BLDOPT_REMOVE_DCT_INTERLEAVE" |
| IN BOOLEAN OptionNodeInterleave; ///< @ref BLDOPT_REMOVE_NODE_INTERLEAVE "BLDOPT_REMOVE_NODE_INTERLEAVE" |
| IN BOOLEAN OptionParallelTraining; ///< @ref BLDOPT_REMOVE_PARALLEL_TRAINING "BLDOPT_REMOVE_PARALLEL_TRAINING" |
| IN BOOLEAN OptionOnlineSpare; ///< @ref BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT "BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT" |
| IN BOOLEAN OptionMemRestore; ///< @ref BLDOPT_REMOVE_MEM_RESTORE_SUPPORT "BLDOPT_REMOVE_MEM_RESTORE_SUPPORT" |
| IN BOOLEAN OptionMultisocket; ///< @ref BLDOPT_REMOVE_MULTISOCKET_SUPPORT "BLDOPT_REMOVE_MULTISOCKET_SUPPORT" |
| IN BOOLEAN OptionAcpiPstates; ///< @ref BLDOPT_REMOVE_ACPI_PSTATES "BLDOPT_REMOVE_ACPI_PSTATES" |
| IN BOOLEAN OptionPStatesInHpcMode; ///< @ref BLDCFG_PSTATE_HPC_MODE "BLDCFG_PSTATE_HPC_MODE" |
| IN BOOLEAN OptionCrat; ///< @ref BLDOPT_REMOVE_CRAT "BLDOPT_REMOVE_CRAT" |
| IN BOOLEAN OptionCdit; ///< @ref BLDOPT_REMOVE_CDIT "BLDOPT_REMOVE_CDIT" |
| IN BOOLEAN OptionSrat; ///< @ref BLDOPT_REMOVE_SRAT "BLDOPT_REMOVE_SRAT" |
| IN BOOLEAN OptionSlit; ///< @ref BLDOPT_REMOVE_SLIT "BLDOPT_REMOVE_SLIT" |
| IN BOOLEAN OptionWhea; ///< @ref BLDOPT_REMOVE_WHEA "BLDOPT_REMOVE_WHEA" |
| IN BOOLEAN OptionDmi; ///< @ref BLDOPT_REMOVE_DMI "BLDOPT_REMOVE_DMI" |
| IN BOOLEAN OptionEarlySamples; ///< @ref BLDOPT_REMOVE_EARLY_SAMPLES "BLDOPT_REMOVE_EARLY_SAMPLES" |
| IN BOOLEAN OptionAddrToCsTranslator; ///< ADDR_TO_CS_TRANSLATOR |
| |
| //Build Configuration Area |
| IN UINT64 CfgPciMmioAddress; ///< Pci Mmio Base Address to use for PCI Config accesses. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCI_MMIO_BASE} |
| IN UINT32 CfgPciMmioSize; ///< Pci Mmio region Size. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCI_MMIO_SIZE} |
| IN PLATFORM_VRM_CONFIGURATION CfgPlatVrmCfg[MaxVrmType]; ///< Several configuration settings for the voltage regulator modules. |
| IN UINT32 CfgPlatNumIoApics; ///< The number of IO APICS for the platform. |
| IN UINT32 CfgMemInitPstate; ///< Memory Init Pstate. |
| IN PLATFORM_C1E_MODES CfgPlatformC1eMode; ///< Select the C1e Mode that will used. |
| IN UINT32 CfgPlatformC1eOpData; ///< An IO port or additional C1e setup data, depends on C1e mode. |
| IN UINT32 CfgPlatformC1eOpData1; ///< An IO port or additional C1e setup data, depends on C1e mode. |
| IN UINT32 CfgPlatformC1eOpData2; ///< An IO port or additional C1e setup data, depends on C1e mode. |
| IN UINT32 CfgPlatformC1eOpData3; ///< An IO port or additional C1e setup data, depends on C1e mode. |
| IN PLATFORM_CSTATE_MODES CfgPlatformCStateMode; ///< Select the C-State Mode that will used. |
| IN UINT32 CfgPlatformCStateOpData; ///< An IO port or additional C-State setup data, depends on C-State mode. |
| IN UINT16 CfgPlatformCStateIoBaseAddress; ///< Specifies I/O ports that can be used to allow CPU to enter CStates |
| IN PLATFORM_CPB_MODES CfgPlatformCpbMode; ///< Enable or disable core performance boost |
| IN PLATFORM_LOW_POWER_PSTATE_MODES CfgLowPowerPstateForProcHot; ///< Low power Pstate for PROCHOT mode |
| IN UINT32 CfgCoreLevelingMode; ///< Apply any downcoring or core count leveling as specified. |
| IN PERFORMANCE_PROFILE CfgPerformanceProfile; ///< The platform's control flow mode and platform performance settings. |
| IN CPU_HT_DEEMPHASIS_LEVEL *CfgPlatformDeemphasisList; ///< Deemphasis levels for the platform's HT links. |
| |
| IN UINT32 CfgAmdPlatformType; ///< Designate the platform as a Server, Desktop, or Mobile. |
| IN UINT32 CfgAmdPowerCeiling; ///< PowerCeiling, specifies a maximum power usage limit for the platform |
| IN UINT16 CfgHtcTemperatureLimit; ///< Hardware Thermal Control temperature limit in tenths of degrees Celsius. |
| IN UINT16 CfgLhtcTemperatureLimit; ///< Local Hardware Thermal Control temperature limit in tenths of degrees Celsius. |
| |
| IN UINT32 CfgMemoryBusFrequencyLimit; ///< Memory Bus Frequency Limit. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT} |
| IN BOOLEAN CfgMemoryModeUnganged; ///< Memory Mode Unganged. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_MODE_UNGANGED} |
| IN BOOLEAN CfgMemoryQuadRankCapable; ///< Memory Quad Rank Capable. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_QUAD_RANK_CAPABLE} |
| IN UINT32 CfgMemoryQuadrankType; ///< Memory Quadrank Type. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_QUADRANK_TYPE} |
| IN BOOLEAN CfgMemoryRDimmCapable; ///< Memory RDIMM Capable. |
| IN BOOLEAN CfgMemoryLRDimmCapable; ///< Memory LRDIMM Capable. |
| IN BOOLEAN CfgMemoryUDimmCapable; ///< Memory UDIMM Capable. |
| IN BOOLEAN CfgMemorySODimmCapable; ///< Memory SODimm Capable. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_SODIMM_CAPABLE} |
| IN BOOLEAN CfgLimitMemoryToBelow1Tb; ///< Limit memory address space to below 1TB |
| IN BOOLEAN CfgMemoryEnableBankInterleaving; ///< Memory Enable Bank Interleaving. |
| IN BOOLEAN CfgMemoryEnableNodeInterleaving; ///< Memory Enable Node Interleaving. |
| IN BOOLEAN CfgMemoryChannelInterleaving; ///< Memory Channel Interleaving. |
| IN BOOLEAN CfgMemoryPowerDown; ///< Memory Power Down. |
| IN UINT32 CfgPowerDownMode; ///< Power Down Mode. |
| IN BOOLEAN CfgOnlineSpare; ///< Online Spare. |
| IN BOOLEAN CfgMemoryParityEnable; ///< Memory Parity Enable. |
| IN BOOLEAN CfgBankSwizzle; ///< Bank Swizzle. |
| IN UINT32 CfgTimingModeSelect; ///< Timing Mode Select. |
| IN UINT32 CfgMemoryClockSelect; ///< Memory Clock Select. |
| IN BOOLEAN CfgDqsTrainingControl; ///< Dqs Training Control. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_DQS_TRAINING_CONTROL} |
| IN BOOLEAN CfgIgnoreSpdChecksum; ///< Ignore Spd Checksum. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGNORE_SPD_CHECKSUM} |
| IN BOOLEAN CfgUseBurstMode; ///< Use Burst Mode. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_USE_BURST_MODE} |
| IN BOOLEAN CfgMemoryAllClocksOn; ///< Memory All Clocks On. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_MEMORY_ALL_CLOCKS_ON} |
| IN BOOLEAN CfgEnableEccFeature; ///< Enable ECC Feature. |
| IN BOOLEAN CfgEccRedirection; ///< ECC Redirection. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_REDIRECTION} |
| IN UINT16 CfgScrubDramRate; ///< Scrub Dram Rate. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_DRAM_RATE} |
| IN UINT16 CfgScrubL2Rate; ///< Scrub L2Rate. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_L2_RATE} |
| IN UINT16 CfgScrubL3Rate; ///< Scrub L3Rate. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_L3_RATE} |
| IN UINT16 CfgScrubIcRate; ///< Scrub Ic Rate. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_IC_RATE} |
| IN UINT16 CfgScrubDcRate; ///< Scrub Dc Rate. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_SCRUB_DC_RATE} |
| IN BOOLEAN CfgEccSyncFlood; ///< ECC Sync Flood. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_SYNC_FLOOD} |
| IN UINT16 CfgEccSymbolSize; ///< ECC Symbol Size. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_ECC_SYMBOL_SIZE} |
| IN UINT64 CfgHeapDramAddress; ///< Heap contents will be temporarily stored in this address during the transition. |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_HEAP_DRAM_ADDRESS} |
| IN BOOLEAN CfgNodeMem1GBAlign; ///< Node Mem 1GB boundary Alignment |
| IN BOOLEAN CfgS3LateRestore; ///< S3 Late Restore |
| IN BOOLEAN CfgAcpiPstateIndependent; ///< PSD method dependent/Independent |
| IN UINT32 CfgAcpiPstatesPsdPolicy; ///< PSD policy |
| IN AP_MTRR_SETTINGS *CfgApMtrrSettingsList; ///< The AP's MTRR settings before final halt |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_AP_MTRR_SETTINGS_LIST} |
| IN UMA_MODE CfgUmaMode; ///< Uma Mode |
| IN UINT32 CfgUmaSize; ///< Uma Size [31:0]=Addr[47:16] |
| IN BOOLEAN CfgUmaAbove4G; ///< Uma Above 4G Support |
| IN UMA_ALIGNMENT CfgUmaAlignment; ///< Uma alignment |
| IN BOOLEAN CfgProcessorScopeInSb; ///< ACPI Processor Object in \\_SB scope |
| IN CHAR8 CfgProcessorScopeName0; ///< OEM specific 1st character of processor scope name. |
| IN CHAR8 CfgProcessorScopeName1; ///< OEM specific 2nd character of processor scope name. |
| IN UINT8 CfgGnbHdAudio; ///< GNB HD Audio |
| IN UINT8 CfgAbmSupport; ///< Abm Support |
| IN UINT8 CfgDynamicRefreshRate; ///< DRR Dynamic Refresh Rate |
| IN UINT16 CfgLcdBackLightControl; ///< LCD Backlight Control |
| IN UINT8 CfgGnb3dStereoPinIndex; ///< 3D Stereo Pin ID. |
| IN UINT32 CfgTempPcieMmioBaseAddress; ///< Temp pcie MMIO base Address |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_TEMP_PCIE_MMIO_BASE_ADDRESS} |
| IN UINT32 CfgGnbIGPUSSID; ///< Gnb internal GPU SSID |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGPU_SUBSYSTEM_ID} |
| IN UINT32 CfgGnbHDAudioSSID; ///< Gnb HD Audio SSID |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID} |
| IN UINT32 CfgGnbPcieSSID; ///< Gnb PCIe SSID |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_APU_PCIE_PORTS_SUBSYSTEM_ID} |
| IN UINT16 CfgLvdsSpreadSpectrum; ///< Lvds Spread Spectrum |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM} |
| IN UINT16 CfgLvdsSpreadSpectrumRate; ///< Lvds Spread Spectrum Rate |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_GFX_LVDS_SPREAD_SPECTRUM_RATE} |
| IN FCH_PLATFORM_POLICY *FchBldCfg; ///< FCH platform build configuration policy |
| |
| IN BOOLEAN CfgIommuSupport; ///< IOMMU support |
| IN UINT8 CfgLvdsPowerOnSeqDigonToDe; ///< Panel initialization timing |
| IN UINT8 CfgLvdsPowerOnSeqDeToVaryBl; ///< Panel initialization timing |
| IN UINT8 CfgLvdsPowerOnSeqDeToDigon; ///< Panel initialization timing |
| IN UINT8 CfgLvdsPowerOnSeqVaryBlToDe; ///< Panel initialization timing |
| IN UINT8 CfgLvdsPowerOnSeqOnToOffDelay; ///< Panel initialization timing |
| IN UINT8 CfgLvdsPowerOnSeqVaryBlToBlon; ///< Panel initialization timing |
| IN UINT8 CfgLvdsPowerOnSeqBlonToVaryBl; ///< Panel initialization timing |
| IN UINT16 CfgLvdsMaxPixelClockFreq; ///< The maximum pixel clock frequency supported |
| IN UINT32 CfgLcdBitDepthControlValue; ///< The LCD bit depth control settings |
| IN UINT8 CfgLvds24bbpPanelMode; ///< The LVDS 24 BBP mode |
| IN LVDS_MISC_CONTROL CfgLvdsMiscControl; ///< THe LVDS Misc control |
| IN UINT16 CfgPcieRefClkSpreadSpectrum; ///< PCIe Reference Clock Spread Spectrum |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM} |
| IN BOOLEAN CfgExternalVrefCtlFeature; ///< External Vref control |
| IN FORCE_TRAIN_MODE CfgForceTrainMode; ///< Force Train Mode |
| IN BOOLEAN CfgGnbRemoteDisplaySupport; ///< Wireless Display Support |
| IN IOMMU_EXCLUSION_RANGE_DESCRIPTOR *CfgIvrsExclusionRangeList; |
| IN BOOLEAN CfgGnbSyncFloodPinAsNmi; ///< @ref BLDCFG_USE_SYNCFLOOD_AS_NMI "BLDCFG_USE_SYNCFLOOD_AS_NMI" |
| IN UINT8 CfgIgpuEnableDisablePolicy; ///< This item defines the iGPU Enable/Disable policy |
| ///< @li 0 = Auto - use current default |
| ///< @li 2 = Disable iGPU if ANY PCI or PCIe Graphics card is present |
| ///< @BldCfgItem{BLDCFG_IGPU_ENABLE_DISABLE_POLICY} |
| IN UINT8 CfgGnbSwTjOffset; ///< Software-writeable TjOffset to account for changes in junction temperature |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_GNB_THERMAL_SENSOR_CORRECTION} |
| IN UINT8 CfgLvdsMiscVoltAdjustment; ///< Register LVDS_CTRL_4 to adjust LVDS output voltage |
| ///< Build-time customizable only - @BldCfgItem{BLDCFG_LVDS_MISC_VOL_ADJUSTMENT} |
| IN DISPLAY_MISC_CONTROL CfgDisplayMiscControl; ///< The Display Misc control |
| IN DP_FIXED_VOLT_SWING_TYPE CfgDpFixedVoltSwingType;///< To indicate fixed voltage swing value |
| ///< @BldCfgItem{BLDCFG_DP_FIXED_VOLT_SWING} |
| IN TECHNOLOGY_TYPE CfgDimmTypeUsedInMixedConfig; ///< Select the preferred technology type that AGESA will enable |
| ///< when it is mixed with other technology types. |
| IN BOOLEAN CfgHybridBoostEnable; ///< HyBrid Boost support |
| ///< @BldCfgItem{BLDCFG_HYBRID_BOOST_ENABLE} |
| IN UINT64 CfgGnbIoapicAddress; ///< GNB IOAPIC Base Address(NULL if platform configured) |
| ///< @BldCfgItem{BLDCFG_GNB_IOAPIC_ADDRESS} |
| IN BOOLEAN CfgDataEyeEn; ///< Enable get 2D Data Eye |
| IN BOOLEAN CfgDockedTdpHeadroom; ///< @BldCfgItem{BLDCFG_DOCKED_TDP_HEADROOM} |
| IN BOOLEAN CfgDramDoubleRefreshRateEn; ///< Double DRAM refresh rate |
| IN BOOLEAN Reserved; ///< reserved... |
| } BUILD_OPT_CFG; |
| |
| /// A structure containing platform specific operational characteristics. This |
| /// structure is initially populated by the initializer with a copy of the same |
| /// structure that was created at build time using the build configuration controls. |
| typedef struct _PLATFORM_CONFIGURATION { |
| IN PERFORMANCE_PROFILE PlatformProfile; ///< Several configuration settings for the processor. |
| IN CPU_HT_DEEMPHASIS_LEVEL *PlatformDeemphasisList; ///< Deemphasis levels for the platform's HT links. |
| ///< @BldCfgItem{BLDCFG_PLATFORM_DEEMPHASIS_LIST}. |
| ///< @n @e Examples: See @ref DeemphasisExamples "Deemphasis List Examples". |
| IN UINT8 CoreLevelingMode; ///< Indicates how to balance the number of cores per processor. |
| ///< @BldCfgItem{BLDCFG_CORE_LEVELING_MODE} |
| IN PLATFORM_C1E_MODES C1eMode; ///< Specifies the method of C1e enablement - Disabled, HW, or message based. |
| ///< @BldCfgItem{BLDCFG_PLATFORM_C1E_MODE} |
| IN UINT32 C1ePlatformData; ///< If C1eMode is HW, specifies the P_LVL3 I/O port of the platform. |
| ///< @BldCfgItem{BLDCFG_PLATFORM_C1E_OPDATA} |
| IN UINT32 C1ePlatformData1; ///< If C1eMode is SW, specifies the address of chipset's SMI command port. |
| ///< @BldCfgItem{BLDCFG_PLATFORM_C1E_OPDATA1} |
| IN UINT32 C1ePlatformData2; ///< If C1eMode is SW, specifies the unique number used by the SMI handler to identify SMI source. |
| ///< @BldCfgItem{BLDCFG_PLATFORM_C1E_OPDATA2} |
| IN UINT32 C1ePlatformData3; ///< If C1eMode is Auto, specifies the P_LVL3 I/O port of the platform for HW C1e |
| ///< @BldCfgItem{BLDCFG_PLATFORM_C1E_OPDATA3} |
| IN PLATFORM_CSTATE_MODES CStateMode; ///< Specifies the method of C-State enablement - Disabled, or C6. |
| ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_MODE} |
| IN UINT32 CStatePlatformData; ///< This element specifies some pertinent data needed for the operation of the Cstate feature |
| ///< If CStateMode is CStateModeC6, this item is reserved |
| ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_OPDATA} |
| IN UINT16 CStateIoBaseAddress; ///< This item specifies a free block of 8 consecutive bytes of I/O ports that |
| ///< can be used to allow the CPU to enter Cstates. |
| ///< @BldCfgItem{BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS} |
| IN PLATFORM_CPB_MODES CpbMode; ///< Specifies the method of core performance boost enablement - Disabled, or Auto. |
| ///< @BldCfgItem{BLDCFG_PLATFORM_CPB_MODE} |
| IN BOOLEAN UserOptionDmi; ///< When set to TRUE, the DMI data table is generated. |
| IN BOOLEAN UserOptionPState; ///< When set to TRUE, the PState data tables are generated. |
| IN BOOLEAN UserOptionCrat; ///< When set to TRUE, the CRAT data table is generated. |
| IN BOOLEAN UserOptionCdit; ///< When set to TRUE, the CDIT data table is generated. |
| IN BOOLEAN UserOptionSrat; ///< When set to TRUE, the SRAT data table is generated. |
| IN BOOLEAN UserOptionSlit; ///< When set to TRUE, the SLIT data table is generated. |
| IN BOOLEAN UserOptionWhea; ///< When set to TRUE, the WHEA data table is generated. |
| IN PLATFORM_LOW_POWER_PSTATE_MODES LowPowerPstateForProcHot; ///< Specifies the method of low power Pstate for PROCHOT enablement - Disabled, or Auto. |
| IN UINT32 PowerCeiling; ///< P-State Ceiling Enabling Deck - Max power milli-watts. |
| IN BOOLEAN ForcePstateIndependent; ///< Deprecated in favor of PstatesPsdPolicy. |
| ///< P-State _PSD is forced independent. |
| ///< @BldCfgItem{BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT} |
| IN UINT32 PstatesPsdPolicy; ///< PSD policy |
| ///< @BldCfgItem{BLDCFG_ACPI_PSTATES_PSD_POLICY} |
| IN BOOLEAN PStatesInHpcMode; ///< @BldCfgItem{BLDCFG_PSTATE_HPC_MODE} |
| IN UINT32 NumberOfIoApics; ///< Number of I/O APICs in the system |
| ///< @BldCfgItem{BLDCFG_PLATFORM_NUM_IO_APICS} |
| IN PLATFORM_VRM_CONFIGURATION VrmProperties[MaxVrmType]; ///< Several configuration settings for the voltage regulator modules. |
| IN BOOLEAN ProcessorScopeInSb; ///< ACPI Processor Object in \\_SB scope |
| ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_IN_SB} |
| IN CHAR8 ProcessorScopeName0; ///< OEM specific 1st character of processor scope name. |
| ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_NAME0} |
| IN CHAR8 ProcessorScopeName1; ///< OEM specific 2nd character of processor scope name. |
| ///< @BldCfgItem{BLDCFG_PROCESSOR_SCOPE_NAME1} |
| IN UINT8 GnbHdAudio; ///< Control GFX HD Audio controller(Used for HDMI and DP display output), |
| ///< essentially it enables function 1 of graphics device. |
| ///< @li 0 = HD Audio disable |
| ///< @li 1 = HD Audio enable |
| ///< @BldCfgItem{BLDCFG_CFG_GNB_HD_AUDIO} |
| IN UINT8 AbmSupport; ///< Automatic adjust LVDS/eDP Back light level support.It is |
| ///< characteristic specific to display panel which used by platform design. |
| ///< @li 0 = ABM support disabled |
| ///< @li 1 = ABM support enabled |
| ///< @BldCfgItem{BLDCFG_CFG_ABM_SUPPORT} |
| IN UINT8 DynamicRefreshRate; ///< Adjust refresh rate on LVDS/eDP. |
| ///< @BldCfgItem{BLDCFG_CFG_DYNAMIC_REFRESH_RATE} |
| IN UINT16 LcdBackLightControl; ///< The PWM frequency to LCD backlight control. |
| ///< If equal to 0 backlight not controlled by iGPU |
| ///< @BldCfgItem{BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL} |
| IN UINT16 HtcTemperatureLimit; ///< The Hardware Thermal Control temperature limit in tenths of degrees Celsius. |
| ///< If equal to 0, use hardware defaults. |
| ///< @BldCfgItem{BLDCFG_HTC_TEMPERATURE_LIMIT} |
| IN UINT16 LhtcTemperatureLimit; ///< The Local Hardware Thermal Control temperature limit in tenths of degrees Celsius. |
| ///< If equal to 0, use hardware defaults. |
| ///< @BldCfgItem{BLDCFG_LHTC_TEMPERATURE_LIMIT} |
| } PLATFORM_CONFIGURATION; |
| |
| |
| /********************************************************************** |
| * Structures for: AmdInitLate |
| **********************************************************************/ |
| #define PROC_VERSION_LENGTH 48 |
| #define MAX_DIMMS_PER_SOCKET 16 |
| #define PROC_MANU_LENGTH 29 |
| |
| /* Interface Parameter Structures */ |
| /// DMI Type4 - Processor ID |
| typedef struct { |
| OUT UINT32 ProcIdLsd; ///< Lower half of 64b ID |
| OUT UINT32 ProcIdMsd; ///< Upper half of 64b ID |
| } TYPE4_PROC_ID; |
| |
| /// DMI Type 4 - Processor information |
| typedef struct { |
| OUT UINT8 T4ProcType; ///< CPU Type |
| OUT UINT8 T4ProcFamily; ///< Family 1 |
| OUT TYPE4_PROC_ID T4ProcId; ///< Id |
| OUT UINT8 T4Voltage; ///< Voltage |
| OUT UINT16 T4ExternalClock; ///< External clock |
| OUT UINT16 T4MaxSpeed; ///< Max speed |
| OUT UINT16 T4CurrentSpeed; ///< Current speed |
| OUT UINT8 T4Status; ///< Status |
| OUT UINT8 T4ProcUpgrade; ///< Up grade |
| OUT UINT8 T4CoreCount; ///< Core count |
| OUT UINT8 T4CoreEnabled; ///< Core Enable |
| OUT UINT8 T4ThreadCount; ///< Thread count |
| OUT UINT16 T4ProcCharacteristics; ///< Characteristics |
| OUT UINT16 T4ProcFamily2; ///< Family 2 |
| OUT CHAR8 T4ProcVersion[PROC_VERSION_LENGTH]; ///< Cpu version |
| OUT CHAR8 T4ProcManufacturer[PROC_MANU_LENGTH]; ///< Manufacturer |
| } TYPE4_DMI_INFO; |
| |
| /// DMI Type 7 - Cache information |
| typedef struct _TYPE7_DMI_INFO { |
| OUT UINT16 T7CacheCfg; ///< Cache cfg |
| OUT UINT16 T7MaxCacheSize; ///< Max size |
| OUT UINT16 T7InstallSize; ///< Install size |
| OUT UINT16 T7SupportedSramType; ///< Supported Sram Type |
| OUT UINT16 T7CurrentSramType; ///< Current type |
| OUT UINT8 T7CacheSpeed; ///< Speed |
| OUT UINT8 T7ErrorCorrectionType; ///< ECC type |
| OUT UINT8 T7SystemCacheType; ///< Cache type |
| OUT UINT8 T7Associativity; ///< Associativity |
| } TYPE7_DMI_INFO; |
| |
| /// DMI Type 16 offset 04h - Location |
| typedef enum { |
| OtherLocation = 0x01, ///< Assign 01 to Other |
| UnknownLocation, ///< Assign 02 to Unknown |
| SystemboardOrMotherboard, ///< Assign 03 to systemboard or motherboard |
| IsaAddonCard, ///< Assign 04 to ISA add-on card |
| EisaAddonCard, ///< Assign 05 to EISA add-on card |
| PciAddonCard, ///< Assign 06 to PCI add-on card |
| McaAddonCard, ///< Assign 07 to MCA add-on card |
| PcmciaAddonCard, ///< Assign 08 to PCMCIA add-on card |
| ProprietaryAddonCard, ///< Assign 09 to proprietary add-on card |
| NuBus, ///< Assign 0A to NuBus |
| Pc98C20AddonCard, ///< Assign 0A0 to PC-98/C20 add-on card |
| Pc98C24AddonCard, ///< Assign 0A1 to PC-98/C24 add-on card |
| Pc98EAddoncard, ///< Assign 0A2 to PC-98/E add-on card |
| Pc98LocalBusAddonCard ///< Assign 0A3 to PC-98/Local bus add-on card |
| } DMI_T16_LOCATION; |
| |
| /// DMI Type 16 offset 05h - Memory Error Correction |
| typedef enum { |
| OtherUse = 0x01, ///< Assign 01 to Other |
| UnknownUse, ///< Assign 02 to Unknown |
| SystemMemory, ///< Assign 03 to system memory |
| VideoMemory, ///< Assign 04 to video memory |
| FlashMemory, ///< Assign 05 to flash memory |
| NonvolatileRam, ///< Assign 06 to non-volatile RAM |
| CacheMemory ///< Assign 07 to cache memory |
| } DMI_T16_USE; |
| |
| /// DMI Type 16 offset 07h - Maximum Capacity |
| typedef enum { |
| Dmi16OtherErrCorrection = 0x01, ///< Assign 01 to Other |
| Dmi16UnknownErrCorrection, ///< Assign 02 to Unknown |
| Dmi16NoneErrCorrection, ///< Assign 03 to None |
| Dmi16Parity, ///< Assign 04 to parity |
| Dmi16SingleBitEcc, ///< Assign 05 to Single-bit ECC |
| Dmi16MultiBitEcc, ///< Assign 06 to Multi-bit ECC |
| Dmi16Crc ///< Assign 07 to CRC |
| } DMI_T16_ERROR_CORRECTION; |
| |
| /// DMI Type 16 - Physical Memory Array |
| typedef struct { |
| OUT DMI_T16_LOCATION Location; ///< The physical location of the Memory Array, |
| ///< whether on the system board or an add-in board. |
| OUT DMI_T16_USE Use; ///< Identifies the function for which the array |
| ///< is used. |
| OUT DMI_T16_ERROR_CORRECTION MemoryErrorCorrection; ///< The primary hardware error correction or |
| ///< detection method supported by this memory array. |
| OUT UINT32 MaximumCapacity; ///< The maximum memory capacity, in kilobytes, |
| ///< for the array. |
| OUT UINT16 NumberOfMemoryDevices; ///< The number of slots or sockets available |
| ///< for memory devices in this array. |
| OUT UINT64 ExtMaxCapacity; ///< The maximum memory capacity, in bytes, |
| ///< for this array. |
| } TYPE16_DMI_INFO; |
| |
| /// DMI Type 17 offset 0Eh - Form Factor |
| typedef enum { |
| OtherFormFactor = 0x01, ///< Assign 01 to Other |
| UnknowFormFactor, ///< Assign 02 to Unknown |
| SimmFormFactor, ///< Assign 03 to SIMM |
| SipFormFactor, ///< Assign 04 to SIP |
| ChipFormFactor, ///< Assign 05 to Chip |
| DipFormFactor, ///< Assign 06 to DIP |
| ZipFormFactor, ///< Assign 07 to ZIP |
| ProprietaryCardFormFactor, ///< Assign 08 to Proprietary Card |
| DimmFormFactorFormFactor, ///< Assign 09 to DIMM |
| TsopFormFactor, ///< Assign 10 to TSOP |
| RowOfChipsFormFactor, ///< Assign 11 to Row of chips |
| RimmFormFactor, ///< Assign 12 to RIMM |
| SodimmFormFactor, ///< Assign 13 to SODIMM |
| SrimmFormFactor, ///< Assign 14 to SRIMM |
| FbDimmFormFactor ///< Assign 15 to FB-DIMM |
| } DMI_T17_FORM_FACTOR; |
| |
| /// DMI Type 17 offset 12h - Memory Type |
| typedef enum { |
| OtherMemType = 0x01, ///< Assign 01 to Other |
| UnknownMemType, ///< Assign 02 to Unknown |
| DramMemType, ///< Assign 03 to DRAM |
| EdramMemType, ///< Assign 04 to EDRAM |
| VramMemType, ///< Assign 05 to VRAM |
| SramMemType, ///< Assign 06 to SRAM |
| RamMemType, ///< Assign 07 to RAM |
| RomMemType, ///< Assign 08 to ROM |
| FlashMemType, ///< Assign 09 to Flash |
| EepromMemType, ///< Assign 10 to EEPROM |
| FepromMemType, ///< Assign 11 to FEPROM |
| EpromMemType, ///< Assign 12 to EPROM |
| CdramMemType, ///< Assign 13 to CDRAM |
| ThreeDramMemType, ///< Assign 14 to 3DRAM |
| SdramMemType, ///< Assign 15 to SDRAM |
| SgramMemType, ///< Assign 16 to SGRAM |
| RdramMemType, ///< Assign 17 to RDRAM |
| DdrMemType, ///< Assign 18 to DDR |
| Ddr2MemType, ///< Assign 19 to DDR2 |
| Ddr2FbdimmMemType, ///< Assign 20 to DDR2 FB-DIMM |
| Ddr3MemType = 0x18, ///< Assign 24 to DDR3 |
| Fbd2MemType ///< Assign 25 to FBD2 |
| } DMI_T17_MEMORY_TYPE; |
| |
| /// DMI Type 17 offset 13h - Type Detail |
| typedef struct { |
| OUT UINT16 Reserved1:1; ///< Reserved |
| OUT UINT16 Other:1; ///< Other |
| OUT UINT16 Unknown:1; ///< Unknown |
| OUT UINT16 FastPaged:1; ///< Fast-Paged |
| OUT UINT16 StaticColumn:1; ///< Static column |
| OUT UINT16 PseudoStatic:1; ///< Pseudo-static |
| OUT UINT16 Rambus:1; ///< RAMBUS |
| OUT UINT16 Synchronous:1; ///< Synchronous |
| OUT UINT16 Cmos:1; ///< CMOS |
| OUT UINT16 Edo:1; ///< EDO |
| OUT UINT16 WindowDram:1; ///< Window DRAM |
| OUT UINT16 CacheDram:1; ///< Cache Dram |
| OUT UINT16 NonVolatile:1; ///< Non-volatile |
| OUT UINT16 Registered:1; ///< Registered (Buffered) |
| OUT UINT16 Unbuffered:1; ///< Unbuffered (Unregistered) |
| OUT UINT16 Reserved2:1; ///< Reserved |
| } DMI_T17_TYPE_DETAIL; |
| |
| /// DMI Type 17 - Memory Device |
| typedef struct { |
| OUT UINT16 Handle; ///< The temporary handle, or instance number, associated with the structure |
| OUT UINT16 TotalWidth; ///< Total Width, in bits, of this memory device, including any check or error-correction bits. |
| OUT UINT16 DataWidth; ///< Data Width, in bits, of this memory device. |
| OUT UINT16 MemorySize; ///< The size of the memory device. |
| OUT DMI_T17_FORM_FACTOR FormFactor; ///< The implementation form factor for this memory device. |
| OUT UINT8 DeviceSet; ///< Identifies when the Memory Device is one of a set of |
| ///< Memory Devices that must be populated with all devices of |
| ///< the same type and size, and the set to which this device belongs. |
| OUT CHAR8 DeviceLocator[8]; ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located. |
| OUT CHAR8 BankLocator[10]; ///< The string number of the string that identifies the physically labeled bank where the memory device is located. |
| OUT DMI_T17_MEMORY_TYPE MemoryType; ///< The type of memory used in this device. |
| OUT DMI_T17_TYPE_DETAIL TypeDetail; ///< Additional detail on the memory device type |
| OUT UINT16 Speed; ///< Identifies the speed of the device, in megahertz (MHz). |
| OUT UINT64 ManufacturerIdCode; ///< Manufacturer ID code. |
| OUT CHAR8 SerialNumber[9]; ///< Serial Number. |
| OUT CHAR8 PartNumber[19]; ///< Part Number. |
| OUT UINT8 Attributes; ///< Bits 7-4: Reserved, Bits 3-0: rank. |
| OUT UINT32 ExtSize; ///< Extended Size. |
| OUT UINT16 ConfigSpeed; ///< Configured memory clock speed |
| } TYPE17_DMI_INFO; |
| |
| /// Memory DMI Type 17 - for memory use |
| typedef struct { |
| OUT UINT8 Socket:3; ///< Socket ID |
| OUT UINT8 Channel:2; ///< Channel ID |
| OUT UINT8 Dimm:2; ///< DIMM ID |
| OUT UINT8 DimmPresent:1; ///< Dimm Present |
| OUT UINT16 Handle; ///< The temporary handle, or instance number, associated with the structure |
| OUT UINT16 TotalWidth; ///< Total Width, in bits, of this memory device, including any check or error-correction bits. |
| OUT UINT16 DataWidth; ///< Data Width, in bits, of this memory device. |
| OUT UINT16 MemorySize; ///< The size of the memory device. |
| OUT DMI_T17_FORM_FACTOR FormFactor; ///< The implementation form factor for this memory device. |
| OUT UINT8 DeviceLocator; ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located. |
| OUT UINT8 BankLocator; ///< The string number of the string that identifies the physically labeled bank where the memory device is located. |
| OUT UINT16 Speed; ///< Identifies the speed of the device, in megahertz (MHz). |
| OUT UINT64 ManufacturerIdCode; ///< Manufacturer ID code. |
| OUT UINT8 SerialNumber[4]; ///< Serial Number. |
| OUT UINT8 PartNumber[18]; ///< Part Number. |
| OUT UINT8 Attributes; ///< Bits 7-4: Reserved, Bits 3-0: rank. |
| OUT UINT32 ExtSize; ///< Extended Size. |
| OUT UINT16 ConfigSpeed; ///< Configured memory clock speed |
| } MEM_DMI_PHYSICAL_DIMM_INFO; |
| |
| /// Memory DMI Type 20 - for memory use |
| typedef struct { |
| OUT UINT8 Socket:3; ///< Socket ID |
| OUT UINT8 Channel:2; ///< Channel ID |
| OUT UINT8 Dimm:2; ///< DIMM ID |
| OUT UINT8 DimmPresent:1; ///< Dimm Present |
| OUT UINT32 StartingAddr; ///< The physical address, in kilobytes, of a range |
| ///< of memory mapped to the referenced Memory Device. |
| OUT UINT32 EndingAddr; ///< The handle, or instance number, associated with |
| ///< the Memory Device structure to which this address |
| ///< range is mapped. |
| OUT UINT16 MemoryDeviceHandle; ///< The handle, or instance number, associated with |
| ///< the Memory Device structure to which this address |
| ///< range is mapped. |
| OUT UINT64 ExtStartingAddr; ///< The physical address, in bytes, of a range of |
| ///< memory mapped to the referenced Memory Device. |
| OUT UINT64 ExtEndingAddr; ///< The physical ending address, in bytes, of the last of |
| ///< a range of addresses mapped to the referenced Memory Device. |
| } MEM_DMI_LOGICAL_DIMM_INFO; |
| |
| /// DMI Type 19 - Memory Array Mapped Address |
| typedef struct { |
| OUT UINT32 StartingAddr; ///< The physical address, in kilobytes, |
| ///< of a range of memory mapped to the |
| ///< specified physical memory array. |
| OUT UINT32 EndingAddr; ///< The physical ending address of the |
| ///< last kilobyte of a range of addresses |
| ///< mapped to the specified physical memory array. |
| OUT UINT16 MemoryArrayHandle; ///< The handle, or instance number, associated |
| ///< with the physical memory array to which this |
| ///< address range is mapped. |
| OUT UINT8 PartitionWidth; ///< Identifies the number of memory devices that |
| ///< form a single row of memory for the address |
| ///< partition defined by this structure. |
| OUT UINT64 ExtStartingAddr; ///< The physical address, in bytes, of a range of |
| ///< memory mapped to the specified Physical Memory Array. |
| OUT UINT64 ExtEndingAddr; ///< The physical address, in bytes, of a range of |
| ///< memory mapped to the specified Physical Memory Array. |
| } TYPE19_DMI_INFO; |
| |
| ///DMI Type 20 - Memory Device Mapped Address |
| typedef struct { |
| OUT UINT32 StartingAddr; ///< The physical address, in kilobytes, of a range |
| ///< of memory mapped to the referenced Memory Device. |
| OUT UINT32 EndingAddr; ///< The handle, or instance number, associated with |
| ///< the Memory Device structure to which this address |
| ///< range is mapped. |
| OUT UINT16 MemoryDeviceHandle; ///< The handle, or instance number, associated with |
| ///< the Memory Device structure to which this address |
| ///< range is mapped. |
| OUT UINT16 MemoryArrayMappedAddressHandle; ///< The handle, or instance number, associated |
| ///< with the Memory Array Mapped Address structure to |
| ///< which this device address range is mapped. |
| OUT UINT8 PartitionRowPosition; ///< Identifies the position of the referenced Memory |
| ///< Device in a row of the address partition. |
| OUT UINT8 InterleavePosition; ///< The position of the referenced Memory Device in |
| ///< an interleave. |
| OUT UINT8 InterleavedDataDepth; ///< The maximum number of consecutive rows from the |
| ///< referenced Memory Device that are accessed in a |
| ///< single interleaved transfer. |
| OUT UINT64 ExtStartingAddr; ///< The physical address, in bytes, of a range of |
| ///< memory mapped to the referenced Memory Device. |
| OUT UINT64 ExtEndingAddr; ///< The physical ending address, in bytes, of the last of |
| ///< a range of addresses mapped to the referenced Memory Device. |
| } TYPE20_DMI_INFO; |
| |
| /// Collection of pointers to the DMI records |
| typedef struct { |
| OUT TYPE4_DMI_INFO T4[MAX_SOCKETS_SUPPORTED]; ///< Type 4 struc |
| OUT TYPE7_DMI_INFO T7L1[MAX_SOCKETS_SUPPORTED]; ///< Type 7 struc 1 |
| OUT TYPE7_DMI_INFO T7L2[MAX_SOCKETS_SUPPORTED]; ///< Type 7 struc 2 |
| OUT TYPE7_DMI_INFO T7L3[MAX_SOCKETS_SUPPORTED]; ///< Type 7 struc 3 |
| OUT TYPE16_DMI_INFO T16; ///< Type 16 struc |
| OUT TYPE17_DMI_INFO T17[MAX_SOCKETS_SUPPORTED][MAX_CHANNELS_PER_SOCKET][MAX_DIMMS_PER_CHANNEL]; ///< Type 17 struc |
| OUT TYPE19_DMI_INFO T19; ///< Type 19 struc |
| OUT TYPE20_DMI_INFO T20[MAX_SOCKETS_SUPPORTED][MAX_CHANNELS_PER_SOCKET][MAX_DIMMS_PER_CHANNEL]; ///< Type 20 struc |
| } DMI_INFO; |
| |
| /********************************************************************** |
| * Interface call: AllocateExecutionCache |
| **********************************************************************/ |
| #define MAX_CACHE_REGIONS 3 |
| |
| /// AllocateExecutionCache sub param structure for cached memory region |
| typedef struct { |
| IN OUT UINT32 ExeCacheStartAddr; ///< Start address |
| IN OUT UINT32 ExeCacheSize; ///< Size |
| } EXECUTION_CACHE_REGION; |
| |
| /********************************************************************** |
| * Interface call: AmdGetAvailableExeCacheSize |
| **********************************************************************/ |
| /// Get available Cache remain |
| typedef struct { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| OUT UINT32 AvailableExeCacheSize; ///< Remain size |
| } AMD_GET_EXE_SIZE_PARAMS; |
| |
| AGESA_STATUS |
| AmdGetAvailableExeCacheSize ( |
| IN OUT AMD_GET_EXE_SIZE_PARAMS *AmdGetExeSizeParams |
| ); |
| |
| /// Selection type for core leveling |
| typedef enum { |
| CORE_LEVEL_LOWEST, ///< Level to lowest common denominator |
| CORE_LEVEL_TWO, ///< Level to 2 cores |
| CORE_LEVEL_POWER_OF_TWO, ///< Level to 1,2,4 or 8 |
| CORE_LEVEL_NONE, ///< Do no leveling |
| CORE_LEVEL_COMPUTE_UNIT, ///< Level cores to one core per compute unit |
| CORE_LEVEL_COMPUTE_UNIT_TWO, ///< Level cores to two cores per compute unit |
| CORE_LEVEL_COMPUTE_UNIT_THREE, ///< Level cores to three cores per compute unit |
| CORE_LEVEL_ONE, ///< Level to 1 core |
| CORE_LEVEL_THREE, ///< Level to 3 cores |
| CORE_LEVEL_FOUR, ///< Level to 4 cores |
| CORE_LEVEL_FIVE, ///< Level to 5 cores |
| CORE_LEVEL_SIX, ///< Level to 6 cores |
| CORE_LEVEL_SEVEN, ///< Level to 7 cores |
| CORE_LEVEL_EIGHT, ///< Level to 8 cores |
| CORE_LEVEL_NINE, ///< Level to 9 cores |
| CORE_LEVEL_TEN, ///< Level to 10 cores |
| CORE_LEVEL_ELEVEN, ///< Level to 11 cores |
| CORE_LEVEL_TWELVE, ///< Level to 12 cores |
| CORE_LEVEL_THIRTEEN, ///< Level to 13 cores |
| CORE_LEVEL_FOURTEEN, ///< Level to 14 cores |
| CORE_LEVEL_FIFTEEN, ///< Level to 15 cores |
| CoreLevelModeMax ///< Used for bounds checking |
| } CORE_LEVELING_TYPE; |
| |
| |
| |
| |
| |
| /************************************************************************ |
| * |
| * AGESA Basic Level interface structure definition and function prototypes |
| * |
| ***********************************************************************/ |
| |
| /********************************************************************** |
| * Interface call: AmdCreateStruct |
| **********************************************************************/ |
| AGESA_STATUS |
| AmdCreateStruct ( |
| IN OUT AMD_INTERFACE_PARAMS *InterfaceParams |
| ); |
| |
| /********************************************************************** |
| * Interface call: AmdReleaseStruct |
| **********************************************************************/ |
| AGESA_STATUS |
| AmdReleaseStruct ( |
| IN OUT AMD_INTERFACE_PARAMS *InterfaceParams |
| ); |
| |
| /********************************************************************** |
| * Interface call: AmdInitReset |
| **********************************************************************/ |
| /// AmdInitReset param structure |
| typedef struct { |
| IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN EXECUTION_CACHE_REGION CacheRegion[3]; ///< The cached memory region |
| IN AMD_HT_RESET_INTERFACE HtConfig; ///< The interface for Ht Recovery |
| IN FCH_RESET_INTERFACE FchInterface; ///< Interface for FCH configuration |
| } AMD_RESET_PARAMS; |
| |
| AGESA_STATUS |
| AmdInitReset ( |
| IN OUT AMD_RESET_PARAMS *ResetParams |
| ); |
| |
| |
| /********************************************************************** |
| * Interface call: AmdInitEarly |
| **********************************************************************/ |
| /// InitEarly param structure |
| /// |
| /// Provide defaults or customizations to each service performed in AmdInitEarly. |
| /// |
| typedef struct { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN EXECUTION_CACHE_REGION CacheRegion[3]; ///< Execution Map Interface |
| IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. |
| IN AMD_HT_INTERFACE HtConfig; ///< HyperTransport Interface |
| IN GNB_CONFIGURATION GnbConfig; ///< GNB configuration |
| } AMD_EARLY_PARAMS; |
| |
| AGESA_STATUS |
| AmdInitEarly ( |
| IN OUT AMD_EARLY_PARAMS *EarlyParams |
| ); |
| |
| |
| /********************************************************************** |
| * Interface call: AmdInitPost |
| **********************************************************************/ |
| /// AmdInitPost param structure |
| typedef struct { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. |
| IN MEM_PARAMETER_STRUCT MemConfig; ///< Memory post param |
| IN GNB_POST_CONFIGURATION GnbPostConfig; ///< GNB post param |
| } AMD_POST_PARAMS; |
| |
| AGESA_STATUS |
| AmdInitPost ( |
| IN OUT AMD_POST_PARAMS *PostParams ///< Amd Cpu init param |
| ); |
| |
| |
| /********************************************************************** |
| * Interface call: AmdInitEnv |
| **********************************************************************/ |
| /// AmdInitEnv param structure |
| typedef struct { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. |
| IN GNB_ENV_CONFIGURATION GnbEnvConfiguration; ///< GNB configuration |
| IN FCH_INTERFACE FchInterface; ///< FCH configuration |
| } AMD_ENV_PARAMS; |
| |
| AGESA_STATUS |
| AmdInitEnv ( |
| IN OUT AMD_ENV_PARAMS *EnvParams |
| ); |
| |
| |
| /********************************************************************** |
| * Interface call: AmdInitMid |
| **********************************************************************/ |
| /// AmdInitMid param structure |
| typedef struct { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. |
| IN GNB_MID_CONFIGURATION GnbMidConfiguration; ///< GNB configuration |
| IN FCH_INTERFACE FchInterface; ///< FCH configuration |
| } AMD_MID_PARAMS; |
| |
| AGESA_STATUS |
| AmdInitMid ( |
| IN OUT AMD_MID_PARAMS *MidParams |
| ); |
| |
| |
| /********************************************************************** |
| * Interface call: AmdInitLate |
| **********************************************************************/ |
| /// AmdInitLate param structure |
| typedef struct { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. |
| IN IOMMU_EXCLUSION_RANGE_DESCRIPTOR *IvrsExclusionRangeList; ///< Pointer to array of exclusion ranges |
| OUT DMI_INFO *DmiTable; ///< DMI Interface |
| OUT VOID *AcpiPState; ///< Acpi Pstate SSDT Table |
| OUT VOID *AcpiSrat; ///< SRAT Table |
| OUT VOID *AcpiSlit; ///< SLIT Table |
| OUT VOID *AcpiWheaMce; ///< WHEA MCE Table |
| OUT VOID *AcpiWheaCmc; ///< WHEA CMC Table |
| OUT VOID *AcpiAlib; ///< ACPI SSDT table with ALIB implementation |
| OUT VOID *AcpiIvrs; ///< IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table |
| OUT VOID *AcpiCrat; ///< Component Resource Affinity Table table |
| OUT VOID *AcpiCdit; ///< Component Locality Distance Information table |
| IN GNB_LATE_CONFIGURATION GnbLateConfiguration; ///< GNB configuration |
| } AMD_LATE_PARAMS; |
| |
| AGESA_STATUS |
| AmdInitLate ( |
| IN OUT AMD_LATE_PARAMS *LateParams |
| ); |
| |
| /********************************************************************** |
| * Interface call: AmdInitRecovery |
| **********************************************************************/ |
| /// CPU Recovery Parameters |
| typedef struct { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. |
| } AMD_CPU_RECOVERY_PARAMS; |
| |
| /// AmdInitRecovery param structure |
| typedef struct { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN MEM_PARAMETER_STRUCT MemConfig; ///< Memory post param |
| IN EXECUTION_CACHE_REGION CacheRegion[3]; ///< The cached memory region. And the max cache region is 3 |
| IN AMD_CPU_RECOVERY_PARAMS CpuRecoveryParams; ///< Params for CPU related recovery init. |
| } AMD_RECOVERY_PARAMS; |
| |
| AGESA_STATUS |
| AmdInitRecovery ( |
| IN OUT AMD_RECOVERY_PARAMS *RecoveryParams |
| ); |
| |
| /********************************************************************** |
| * Interface call: AmdInitResume |
| **********************************************************************/ |
| /// AmdInitResume param structure |
| typedef struct { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN PLATFORM_CONFIGURATION PlatformConfig; ///< Platform operational characteristics |
| IN AMD_S3_PARAMS S3DataBlock; ///< Save state data |
| } AMD_RESUME_PARAMS; |
| |
| AGESA_STATUS |
| AmdInitResume ( |
| IN AMD_RESUME_PARAMS *ResumeParams |
| ); |
| |
| |
| /********************************************************************** |
| * Interface call: AmdS3LateRestore |
| **********************************************************************/ |
| /// AmdS3LateRestore param structure |
| typedef struct { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. |
| IN AMD_S3_PARAMS S3DataBlock; ///< Save state data |
| } AMD_S3LATE_PARAMS; |
| |
| AGESA_STATUS |
| AmdS3LateRestore ( |
| IN OUT AMD_S3LATE_PARAMS *S3LateParams |
| ); |
| |
| |
| /********************************************************************** |
| * Interface call: AmdS3Save |
| **********************************************************************/ |
| /// AmdS3Save param structure |
| typedef struct { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN PLATFORM_CONFIGURATION PlatformConfig; ///< platform operational characteristics. |
| OUT AMD_S3_PARAMS S3DataBlock; ///< Standard header |
| IN FCH_INTERFACE FchInterface; ///< FCH configuration |
| } AMD_S3SAVE_PARAMS; |
| |
| AGESA_STATUS |
| AmdS3Save ( |
| IN OUT AMD_S3SAVE_PARAMS *AmdS3SaveParams |
| ); |
| |
| |
| /********************************************************************** |
| * Interface call: AmdLateRunApTask |
| **********************************************************************/ |
| /** |
| * Entry point for AP tasking. |
| */ |
| AGESA_STATUS |
| AmdLateRunApTask ( |
| IN AP_EXE_PARAMS *AmdApExeParams |
| ); |
| |
| // |
| // General Services API |
| // |
| |
| /********************************************************************** |
| * Interface service call: AmdGetApicId |
| **********************************************************************/ |
| /// Request the APIC ID of a particular core. |
| |
| typedef struct { |
| IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN UINT8 Socket; ///< The Core's Socket. |
| IN UINT8 Core; ///< The Core id. |
| OUT BOOLEAN IsPresent; ///< The Core is present, and ApicAddress is valid. |
| OUT UINT8 ApicAddress; ///< The Core's APIC ID. |
| } AMD_APIC_PARAMS; |
| |
| /** |
| * Get a specified Core's APIC ID. |
| */ |
| AGESA_STATUS |
| AmdGetApicId ( |
| IN OUT AMD_APIC_PARAMS *AmdParamApic |
| ); |
| |
| /********************************************************************** |
| * Interface service call: AmdGetPciAddress |
| **********************************************************************/ |
| /// Request the PCI Address of a Processor Module (that is, its Northbridge) |
| |
| typedef struct { |
| IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN UINT8 Socket; ///< The Processor's socket |
| IN UINT8 Module; ///< The Module in that Processor |
| OUT BOOLEAN IsPresent; ///< The Core is present, and PciAddress is valid. |
| OUT PCI_ADDR PciAddress; ///< The Processor's PCI Config Space address (Function 0, Register 0) |
| } AMD_GET_PCI_PARAMS; |
| |
| /** |
| * Get Processor Module's PCI Config Space address. |
| */ |
| AGESA_STATUS |
| AmdGetPciAddress ( |
| IN OUT AMD_GET_PCI_PARAMS *AmdParamGetPci |
| ); |
| |
| /********************************************************************** |
| * Interface service call: AmdIdentifyCore |
| **********************************************************************/ |
| /// Request the identity (Socket, Module, Core) of the current Processor Core |
| |
| typedef struct { |
| IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| OUT UINT8 Socket; ///< The current Core's Socket |
| OUT UINT8 Module; ///< The current Core's Processor Module |
| OUT UINT8 Core; ///< The current Core's core id. |
| } AMD_IDENTIFY_PARAMS; |
| |
| /** |
| * "Who am I" for the current running core. |
| */ |
| AGESA_STATUS |
| AmdIdentifyCore ( |
| IN OUT AMD_IDENTIFY_PARAMS *AmdParamIdentify |
| ); |
| |
| /********************************************************************** |
| * Interface service call: AmdReadEventLog |
| **********************************************************************/ |
| /// An Event Log Entry. |
| typedef struct { |
| IN AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| OUT UINT32 EventClass; ///< The severity of this event, matches AGESA_STATUS. |
| OUT UINT32 EventInfo; ///< The unique event identifier, zero means "no event". |
| OUT UINT32 DataParam1; ///< Data specific to the Event. |
| OUT UINT32 DataParam2; ///< Data specific to the Event. |
| OUT UINT32 DataParam3; ///< Data specific to the Event. |
| OUT UINT32 DataParam4; ///< Data specific to the Event. |
| } EVENT_PARAMS; |
| |
| /** |
| * Read an Event from the Event Log. |
| */ |
| AGESA_STATUS |
| AmdReadEventLog ( |
| IN EVENT_PARAMS *Event |
| ); |
| |
| /********************************************************************** |
| * Interface service call: AmdIdentifyDimm |
| **********************************************************************/ |
| /// Request the identity of dimm from system address |
| |
| typedef struct { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN UINT64 MemoryAddress; ///< System Address that needs to be translated to dimm identification. |
| OUT UINT8 SocketId; ///< The socket on which the targeted address locates. |
| OUT UINT8 MemChannelId; ///< The channel on which the targeted address locates. |
| OUT UINT8 DimmId; ///< The dimm on which the targeted address locates. |
| } AMD_IDENTIFY_DIMM; |
| |
| /** |
| * Get the dimm identification for the address. |
| */ |
| AGESA_STATUS |
| AmdIdentifyDimm ( |
| IN OUT AMD_IDENTIFY_DIMM *AmdDimmIdentify |
| ); |
| |
| AGESA_STATUS |
| AmdIdsRunApTaskLate ( |
| IN AP_EXE_PARAMS *AmdApExeParams |
| ); |
| |
| /// Request the 2D Data Eye Training Data |
| #define RD_DATAEYE 0 |
| #define WR_DATAEYE 1 |
| |
| /********************************************************************** |
| * Interface service call: AmdGet2DDataEye |
| **********************************************************************/ |
| /// Request the training data eye on Socket, Channel, Dimm. |
| |
| typedef struct _AMD_GET_DATAEYE { |
| IN OUT AMD_CONFIG_PARAMS StdHeader; ///< Standard configuration header |
| IN OUT AMD_POST_PARAMS *PostParamsPtr; ///< Pointer to AMD_POST_PARAMS |
| IN UINT8 SocketId; ///< The socket number to get the 2D data eye |
| IN UINT8 MemChannelId; ///< The channel number to get the 2D data eye |
| IN UINT8 DimmId; ///< The dimm number to get the 2D data eye |
| IN UINT8 DataEyeType; ///< Get the 2D data eye on read or write training |
| OUT UINT8* DataEyeBuffer; ///< The buffer to stores the 2D data eye |
| } AMD_GET_DATAEYE; |
| |
| AGESA_STATUS |
| AmdGet2DDataEye ( |
| IN OUT AMD_GET_DATAEYE *AmdGetDataEye |
| ); |
| |
| #define AGESA_IDS_DFT_VAL 0xFFFF ///< Default value of every uninitlized NV item, the action for it will be ignored |
| #define AGESA_IDS_NV_END 0xFFFF ///< Flag specify end of option structure |
| /// WARNING: Don't change the comment below, it used as signature for script |
| /// AGESA IDS NV ID Definitions |
| typedef enum { |
| AGESA_IDS_EXT_ID_START = 0x0000,///< 0x0000 specify the start of external NV id |
| |
| AGESA_IDS_NV_UCODE, ///< 0x0001 Enable or disable microcode patching |
| |
| AGESA_IDS_NV_TARGET_PSTATE, ///< 0x0002 Set the P-state required to be activated |
| AGESA_IDS_NV_POSTPSTATE, ///< 0x0003 Set the P-state required to be activated through POST |
| |
| AGESA_IDS_NV_BANK_INTERLEAVE, ///< 0x0004 Enable or disable Bank Interleave |
| AGESA_IDS_NV_CHANNEL_INTERLEAVE, ///< 0x0005 Enable or disable Channel Interleave |
| AGESA_IDS_NV_NODE_INTERLEAVE, ///< 0x0006 Enable or disable Node Interleave |
| AGESA_IDS_NV_MEMHOLE, ///< 0x0007 Enables or disable memory hole |
| |
| AGESA_IDS_NV_SCRUB_REDIRECTION, ///< 0x0008 Enable or disable a write to dram with corrected data |
| AGESA_IDS_NV_DRAM_SCRUB, ///< 0x0009 Set the rate of background scrubbing for DRAM |
| AGESA_IDS_NV_DCACHE_SCRUB, ///< 0x000A Set the rate of background scrubbing for the DCache. |
| AGESA_IDS_NV_L2_SCRUB, ///< 0x000B Set the rate of background scrubbing for the L2 cache |
| AGESA_IDS_NV_L3_SCRUB, ///< 0x000C Set the rate of background scrubbing for the L3 cache |
| AGESA_IDS_NV_ICACHE_SCRUB, ///< 0x000D Set the rate of background scrubbing for the Icache |
| AGESA_IDS_NV_SYNC_ON_ECC_ERROR, ///< 0x000E Enable or disable the sync flood on un-correctable ECC error |
| AGESA_IDS_NV_ECC_SYMBOL_SIZE, ///< 0x000F Set ECC symbol size |
| |
| AGESA_IDS_NV_ALL_MEMCLKS, ///< 0x0010 Enable or disable all memory clocks enable |
| AGESA_IDS_NV_DCT_GANGING_MODE, ///< 0x0011 Set the Ganged mode |
| AGESA_IDS_NV_DRAM_BURST_LENGTH32, ///< 0x0012 Set the DRAM Burst Length 32 |
| AGESA_IDS_NV_MEMORY_POWER_DOWN, ///< 0x0013 Enable or disable Memory power down mode |
| AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE, ///< 0x0014 Set the Memory power down mode |
| AGESA_IDS_NV_DLL_SHUT_DOWN, ///< 0x0015 Enable or disable DLLShutdown |
| AGESA_IDS_NV_ONLINE_SPARE, ///< 0x0016 Enable or disable the Dram controller to designate a DIMM bank as a spare for logical swap |
| |
| AGESA_IDS_NV_HT_ASSIST, ///< 0x0017 Enable or Disable HT Assist |
| AGESA_IDS_NV_ATMMODE, ///< 0x0018 Enable or Disable ATM mode |
| |
| AGESA_IDS_NV_HDTOUT, ///< 0x0019 Enable or disable HDTOUT feature |
| |
| AGESA_IDS_NV_HTLINKSOCKET, ///< 0x001A HT Link Socket |
| AGESA_IDS_NV_HTLINKPORT, ///< 0x001B HT Link Port |
| AGESA_IDS_NV_HTLINKFREQ, ///< 0x001C HT Link Frequency |
| AGESA_IDS_NV_HTLINKWIDTHIN, ///< 0x001D HT Link In Width |
| AGESA_IDS_NV_HTLINKWIDTHOUT, ///< 0x001E HT Link Out Width |
| |
| AGESA_IDS_NV_GNBHDAUDIOEN, ///< 0x001F Enable or disable GNB HD Audio |
| |
| AGESA_IDS_NV_CPB_EN, ///< 0x0020 Core Performance Boost |
| |
| AGESA_IDS_NV_HTC_EN, ///< 0x0021 HTC Enable |
| AGESA_IDS_NV_HTC_OVERRIDE, ///< 0x0022 HTC Override |
| AGESA_IDS_NV_HTC_PSTATE_LIMIT, ///< 0x0023 HTC P-state limit select |
| AGESA_IDS_NV_HTC_TEMP_HYS, ///< 0x0024 HTC Temperature Hysteresis |
| AGESA_IDS_NV_HTC_ACT_TEMP, ///< 0x0025 HTC Activation Temp |
| |
| AGESA_IDS_NV_POWER_POLICY, ///< 0x0026 Select Platform Power Policy |
| AGESA_IDS_NV_DRAMCON, ///< 0x0027 Specify the mode for controller initialization |
| AGESA_IDS_EXT_ID_END, ///< 0x0028 specify the end of external NV ID |
| } IDS_EX_NV_ID; |
| |
| |
| #define IDS_NUM_EXT_NV_ITEM (AGESA_IDS_EXT_ID_END - AGESA_IDS_EXT_ID_START + 1) |
| |
| |
| #endif // _AGESA_H_ |