| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2008-2009 coresystems GmbH |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of |
| * the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <console/console.h> |
| #include <arch/io.h> |
| #include <cpu/cpu.h> |
| #include <cpu/x86/cache.h> |
| #include <cpu/x86/smm.h> |
| #include <string.h> |
| #include "i82801gx.h" |
| |
| extern unsigned char _binary_smm_start; |
| extern unsigned char _binary_smm_size; |
| |
| /* I945 */ |
| #define SMRAM 0x9d |
| #define D_OPEN (1 << 6) |
| #define D_CLS (1 << 5) |
| #define D_LCK (1 << 4) |
| #define G_SMRAME (1 << 3) |
| #define C_BASE_SEG ((0 << 2) | (1 << 1) | (0 << 0)) |
| |
| /* While we read PMBASE dynamically in case it changed, let's |
| * initialize it with a sane value |
| */ |
| static u16 pmbase = DEFAULT_PMBASE; |
| |
| /** |
| * @brief read and clear PM1_STS |
| * @return PM1_STS register |
| */ |
| static u16 reset_pm1_status(void) |
| { |
| u16 reg16; |
| |
| reg16 = inw(pmbase + PM1_STS); |
| /* set status bits are cleared by writing 1 to them */ |
| outw(reg16, pmbase + PM1_STS); |
| |
| return reg16; |
| } |
| |
| static void dump_pm1_status(u16 pm1_sts) |
| { |
| printk(BIOS_DEBUG, "PM1_STS: "); |
| if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK "); |
| if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK "); |
| if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR "); |
| if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC "); |
| if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN "); |
| if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL "); |
| if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM "); |
| if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF "); |
| printk(BIOS_DEBUG, "\n"); |
| } |
| |
| /** |
| * @brief read and clear SMI_STS |
| * @return SMI_STS register |
| */ |
| static u32 reset_smi_status(void) |
| { |
| u32 reg32; |
| |
| reg32 = inl(pmbase + SMI_STS); |
| /* set status bits are cleared by writing 1 to them */ |
| outl(reg32, pmbase + SMI_STS); |
| |
| return reg32; |
| } |
| |
| static void dump_smi_status(u32 smi_sts) |
| { |
| printk(BIOS_DEBUG, "SMI_STS: "); |
| if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); |
| if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); |
| if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); |
| if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); |
| if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); |
| if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); |
| if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); |
| if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); |
| if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); |
| if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); |
| if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); |
| if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); |
| if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); |
| if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); |
| if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); |
| if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); |
| if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); |
| if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); |
| if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); |
| if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); |
| printk(BIOS_DEBUG, "\n"); |
| } |
| |
| |
| /** |
| * @brief read and clear GPE0_STS |
| * @return GPE0_STS register |
| */ |
| static u32 reset_gpe0_status(void) |
| { |
| u32 reg32; |
| |
| reg32 = inl(pmbase + GPE0_STS); |
| /* set status bits are cleared by writing 1 to them */ |
| outl(reg32, pmbase + GPE0_STS); |
| |
| return reg32; |
| } |
| |
| static void dump_gpe0_status(u32 gpe0_sts) |
| { |
| int i; |
| printk(BIOS_DEBUG, "GPE0_STS: "); |
| for (i=31; i>= 16; i--) { |
| if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); |
| } |
| if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); |
| if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); |
| if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); |
| if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); |
| if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); |
| if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); |
| if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); |
| if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); |
| if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); |
| if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); |
| if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); |
| if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); |
| if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); |
| if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); |
| printk(BIOS_DEBUG, "\n"); |
| } |
| |
| |
| /** |
| * @brief read and clear ALT_GP_SMI_STS |
| * @return ALT_GP_SMI_STS register |
| */ |
| static u16 reset_alt_gp_smi_status(void) |
| { |
| u16 reg16; |
| |
| reg16 = inl(pmbase + ALT_GP_SMI_STS); |
| /* set status bits are cleared by writing 1 to them */ |
| outl(reg16, pmbase + ALT_GP_SMI_STS); |
| |
| return reg16; |
| } |
| |
| static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts) |
| { |
| int i; |
| printk(BIOS_DEBUG, "ALT_GP_SMI_STS: "); |
| for (i=15; i>= 0; i--) { |
| if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", i); |
| } |
| printk(BIOS_DEBUG, "\n"); |
| } |
| |
| |
| |
| /** |
| * @brief read and clear TCOx_STS |
| * @return TCOx_STS registers |
| */ |
| static u32 reset_tco_status(void) |
| { |
| u32 tcobase = pmbase + 0x60; |
| u32 reg32; |
| |
| reg32 = inl(tcobase + 0x04); |
| /* set status bits are cleared by writing 1 to them */ |
| outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS |
| if (reg32 & (1 << 18)) |
| outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS |
| |
| return reg32; |
| } |
| |
| |
| static void dump_tco_status(u32 tco_sts) |
| { |
| printk(BIOS_DEBUG, "TCO_STS: "); |
| if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); |
| if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); |
| if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); |
| if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); |
| if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); |
| if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); |
| if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); |
| if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); |
| if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); |
| if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); |
| if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); |
| if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); |
| if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); |
| printk(BIOS_DEBUG, "\n"); |
| } |
| |
| |
| |
| /** |
| * @brief Set the EOS bit |
| */ |
| static void smi_set_eos(void) |
| { |
| u8 reg8; |
| |
| reg8 = inb(pmbase + SMI_EN); |
| reg8 |= EOS; |
| outb(reg8, pmbase + SMI_EN); |
| } |
| |
| extern uint8_t smm_relocation_start, smm_relocation_end; |
| |
| static void smm_relocate(void) |
| { |
| u32 smi_en; |
| u16 pm1_en; |
| |
| printk(BIOS_DEBUG, "Initializing SMM handler..."); |
| |
| pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), 0x40) & 0xfffc; |
| printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); |
| |
| smi_en = inl(pmbase + SMI_EN); |
| if (smi_en & APMC_EN) { |
| printk(BIOS_INFO, "SMI# handler already enabled?\n"); |
| return; |
| } |
| |
| /* copy the SMM relocation code */ |
| memcpy((void *)0x38000, &smm_relocation_start, |
| &smm_relocation_end - &smm_relocation_start); |
| |
| printk(BIOS_DEBUG, "\n"); |
| dump_smi_status(reset_smi_status()); |
| dump_pm1_status(reset_pm1_status()); |
| dump_gpe0_status(reset_gpe0_status()); |
| dump_alt_gp_smi_status(reset_alt_gp_smi_status()); |
| dump_tco_status(reset_tco_status()); |
| |
| /* Enable SMI generation: |
| * - on TCO events |
| * - on APMC writes (io 0xb2) |
| * - on writes to SLP_EN (sleep states) |
| * - on writes to GBL_RLS (bios commands) |
| * No SMIs: |
| * - on microcontroller writes (io 0x62/0x66) |
| */ |
| |
| smi_en = 0; /* reset SMI enables */ |
| |
| #if 0 |
| smi_en |= LEGACY_USB2_EN | LEGACY_USB_EN; |
| #endif |
| smi_en |= TCO_EN; |
| smi_en |= APMC_EN; |
| #if DEBUG_PERIODIC_SMIS |
| /* Set DEBUG_PERIODIC_SMIS in i82801gx.h to debug using |
| * periodic SMIs. |
| */ |
| smi_en |= PERIODIC_EN; |
| #endif |
| smi_en |= SLP_SMI_EN; |
| smi_en |= BIOS_EN; |
| |
| /* The following need to be on for SMIs to happen */ |
| smi_en |= EOS | GBL_SMI_EN; |
| |
| outl(smi_en, pmbase + SMI_EN); |
| |
| pm1_en = 0; |
| pm1_en |= PWRBTN_EN; |
| pm1_en |= GBL_EN; |
| outw(pm1_en, pmbase + PM1_EN); |
| |
| /** |
| * There are several methods of raising a controlled SMI# via |
| * software, among them: |
| * - Writes to io 0xb2 (APMC) |
| * - Writes to the Local Apic ICR with Delivery mode SMI. |
| * |
| * Using the local apic is a bit more tricky. According to |
| * AMD Family 11 Processor BKDG no destination shorthand must be |
| * used. |
| * The whole SMM initialization is quite a bit hardware specific, so |
| * I'm not too worried about the better of the methods at the moment |
| */ |
| |
| /* raise an SMI interrupt */ |
| printk(BIOS_SPEW, " ... raise SMI#\n"); |
| outb(0x00, 0xb2); |
| } |
| |
| static int smm_handler_copied = 0; |
| |
| static int is_wakeup(void) |
| { |
| device_t dev0 = dev_find_slot(0, PCI_DEVFN(0,0)); |
| |
| if (!dev0) |
| return 0; |
| |
| return pci_read_config32(dev0, 0xdc) == SKPAD_ACPI_S3_MAGIC; |
| } |
| |
| static void smm_install(void) |
| { |
| /* The first CPU running this gets to copy the SMM handler. But not all |
| * of them. |
| */ |
| if (smm_handler_copied) |
| return; |
| smm_handler_copied = 1; |
| |
| |
| /* if we're resuming from S3, the SMM code is already in place, |
| * so don't copy it again to keep the current SMM state */ |
| |
| if (!is_wakeup()) { |
| /* enable the SMM memory window */ |
| pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, |
| D_OPEN | G_SMRAME | C_BASE_SEG); |
| |
| /* copy the real SMM handler */ |
| memcpy((void *)0xa0000, &_binary_smm_start, (size_t)&_binary_smm_size); |
| wbinvd(); |
| } |
| |
| /* close the SMM memory window and enable normal SMM */ |
| pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, |
| G_SMRAME | C_BASE_SEG); |
| } |
| |
| void smm_init(void) |
| { |
| /* Put SMM code to 0xa0000 */ |
| smm_install(); |
| |
| /* Put relocation code to 0x38000 and relocate SMBASE */ |
| smm_relocate(); |
| |
| /* We're done. Make sure SMIs can happen! */ |
| smi_set_eos(); |
| } |
| |
| void smm_lock(void) |
| { |
| /* LOCK the SMM memory window and enable normal SMM. |
| * After running this function, only a full reset can |
| * make the SMM registers writable again. |
| */ |
| printk(BIOS_DEBUG, "Locking SMM.\n"); |
| pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, |
| D_LCK | G_SMRAME | C_BASE_SEG); |
| } |
| |
| void smm_setup_structures(void *gnvs, void *tcg, void *smi1) |
| { |
| /* The GDT or coreboot table is going to live here. But a long time |
| * after we relocated the GNVS, so this is not troublesome. |
| */ |
| *(u32 *)0x500 = (u32)gnvs; |
| outb(0xea, 0xb2); |
| } |