| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2014 Google Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| Device (GPIO) |
| { |
| // GPIO Controller |
| Method (_HID) |
| { |
| If (\ISWP ()) { |
| // WildcatPoint |
| Return ("INT3437") |
| } |
| |
| // LynxPoint-LP |
| Return ("INT33C7") |
| } |
| Name (_UID, 1) |
| |
| Name (RBUF, ResourceTemplate() |
| { |
| DWordIo (ResourceProducer, |
| MinFixed, // IsMinFixed |
| MaxFixed, // IsMaxFixed |
| PosDecode, // Decode |
| EntireRange, // ISARanges |
| 0x00000000, // AddressGranularity |
| 0x00000000, // AddressMinimum |
| 0x00000000, // AddressMaximum |
| 0x00000000, // AddressTranslation |
| 0x00000000, // RangeLength |
| , // ResourceSourceIndex |
| , // ResourceSource |
| BAR0) |
| // Disabled due to IRQ storm: http://crosbug.com/p/29548 |
| //Interrupt (ResourceConsumer, |
| // Level, ActiveHigh, Shared, , , ) {14} |
| }) |
| |
| Method (_CRS, 0, NotSerialized) |
| { |
| CreateDwordField (^RBUF, ^BAR0._MIN, BMIN) |
| CreateDwordField (^RBUF, ^BAR0._MAX, BMAX) |
| CreateDwordField (^RBUF, ^BAR0._LEN, BLEN) |
| |
| Store (GPIO_BASE_SIZE, BLEN) |
| Store (GPIO_BASE_ADDRESS, BMIN) |
| Store (Subtract (Add (GPIO_BASE_ADDRESS, |
| GPIO_BASE_SIZE), 1), BMAX) |
| |
| Return (RBUF) |
| } |
| |
| Method (_STA, 0, NotSerialized) |
| { |
| Return (0xF) |
| } |
| |
| // GWAK: Setup GPIO as ACPI GPE for Wake |
| // Arg0: GPIO Number |
| Method (GWAK, 1, NotSerialized) |
| { |
| // Local0 = GPIO Base Address |
| Store (And (GPBS, Not(0x1)), Local0) |
| |
| // Local1 = BANK, Local2 = OFFSET |
| Divide (Arg0, 32, Local2, Local1) |
| |
| // |
| // Set OWNER to ACPI |
| // |
| |
| // Local3 = GPIOBASE + GPIO_OWN(BANK) |
| Store (Add (Local0, Multiply (Local1, 0x4)), Local3) |
| |
| // GPIO_OWN(BANK) |
| OperationRegion (IOWN, SystemIO, Local3, 4) |
| Field (IOWN, AnyAcc, NoLock, Preserve) { |
| GOWN, 32, |
| } |
| |
| // GPIO_OWN[GPIO] = 0 (ACPI) |
| Store (And (GOWN, Not (ShiftLeft (0x1, Local2))), GOWN) |
| |
| // |
| // Set ROUTE to SCI |
| // |
| |
| // Local3 = GPIOBASE + GPIO_ROUTE(BANK) |
| Store (Add (Add (Local0, 0x30), Multiply (Local1, 0x4)), Local3) |
| |
| // GPIO_ROUTE(BANK) |
| OperationRegion (IROU, SystemIO, Local3, 4) |
| Field (IROU, AnyAcc, NoLock, Preserve) { |
| GROU, 32, |
| } |
| |
| // GPIO_ROUTE[GPIO] = 0 (SCI) |
| Store (And (GROU, Not (ShiftLeft (0x1, Local2))), GROU) |
| |
| // |
| // Set GPnCONFIG to GPIO|INPUT|INVERT |
| // |
| |
| // Local3 = GPIOBASE + GPnCONFIG0(GPIO) |
| Store (Add (Add (Local0, 0x100), Multiply (Arg0, 0x8)), Local3) |
| |
| // GPnCONFIG(GPIO) |
| OperationRegion (GPNC, SystemIO, Local3, 8) |
| Field (GPNC, AnyAcc, NoLock, Preserve) { |
| GMOD, 1, // MODE: 0=NATIVE 1=GPIO |
| , 1, |
| GIOS, 1, // IO_SEL: 0=OUTPUT 1=INPUT |
| GINV, 1, // INVERT: 0=NORMAL 1=INVERT |
| GLES, 1, // LxEB: 0=EDGE 1=LEVEL |
| , 24, |
| ILVL, 1, // INPUT: 0=LOW 1=HIGH |
| OLVL, 1, // OUTPUT: 0=LOW 1=HIGH |
| GPWP, 2, // PULLUP: 00=NONE 01=DOWN 10=UP 11=INVALID |
| ISEN, 1, // SENSE: 0=ENABLE 1=DISABLE |
| } |
| |
| Store (0x1, GMOD) // GPIO |
| Store (0x1, GIOS) // INPUT |
| Store (0x1, GINV) // INVERT |
| } |
| } |