| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2010 Advanced Micro Devices, Inc. |
| * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /* This file contains functions for common utility functions */ |
| |
| /* |
| *----------------------------------------------------------------------------- |
| * MODULES USED |
| * |
| *----------------------------------------------------------------------------- |
| */ |
| |
| /* |
| *----------------------------------------------------------------------------- |
| * EXPORTED FUNCTIONS |
| * |
| *----------------------------------------------------------------------------- |
| */ |
| |
| static void AmdMemPCIReadBits(SBDFO loc, u8 highbit, u8 lowbit, u32 *pValue) |
| { |
| /* ASSERT(highbit < 32 && lowbit < 32 && highbit >= lowbit && (loc & 3) == 0); */ |
| |
| AmdMemPCIRead(loc, pValue); |
| *pValue = *pValue >> lowbit; /* Shift */ |
| |
| /* A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case */ |
| if ((highbit-lowbit) != 31) |
| *pValue &= (((u32)1 << (highbit-lowbit+1))-1); |
| } |
| |
| static void AmdMemPCIWriteBits(SBDFO loc, u8 highbit, u8 lowbit, u32 *pValue) |
| { |
| u32 temp, mask; |
| |
| /* ASSERT(highbit < 32 && lowbit < 32 && highbit >= lowbit && (loc & 3) == 0); */ |
| |
| /* A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case */ |
| if ((highbit-lowbit) != 31) |
| mask = (((u32)1 << (highbit-lowbit+1))-1); |
| else |
| mask = (u32)0xFFFFFFFF; |
| |
| AmdMemPCIRead(loc, &temp); |
| temp &= ~(mask << lowbit); |
| temp |= (*pValue & mask) << lowbit; |
| AmdMemPCIWrite(loc, &temp); |
| } |
| |
| /*----------------------------------------------------------------------------- |
| * u32 bitTestSet(u32 csMask,u32 tempD) |
| * |
| * Description: |
| * This routine sets a bit in a u32 |
| * |
| * Parameters: |
| * IN csMask = Target value in which the bit will be set |
| * IN tempD = Bit that will be set |
| * OUT value = Target value with the bit set |
| *----------------------------------------------------------------------------- |
| */ |
| static u32 bitTestSet(u32 csMask,u32 tempD) |
| { |
| u32 localTemp; |
| /* ASSERT(tempD < 32); */ |
| localTemp = 1; |
| csMask |= localTemp << tempD; |
| return csMask; |
| } |
| |
| /*----------------------------------------------------------------------------- |
| * u32 bitTestReset(u32 csMask,u32 tempD) |
| * |
| * Description: |
| * This routine re-sets a bit in a u32 |
| * |
| * Parameters: |
| * IN csMask = Target value in which the bit will be re-set |
| * IN tempD = Bit that will be re-set |
| * OUT value = Target value with the bit re-set |
| *----------------------------------------------------------------------------- |
| */ |
| static u32 bitTestReset(u32 csMask,u32 tempD) |
| { |
| u32 temp, localTemp; |
| /* ASSERT(tempD < 32); */ |
| localTemp = 1; |
| temp = localTemp << tempD; |
| temp = ~temp; |
| csMask &= temp; |
| return csMask; |
| } |
| |
| /*----------------------------------------------------------------------------- |
| * u32 get_Bits(DCTStruct *DCTData, u8 DCT, u8 Node, u8 func, u16 offset, |
| * u8 low, u8 high) |
| * |
| * Description: |
| * This routine Gets the PCT bits from the specified Node, DCT and PCI address |
| * |
| * Parameters: |
| * IN OUT *DCTData - Pointer to buffer with information about each DCT |
| * IN DCT - DCT number |
| * - 1 indicates DCT 1 |
| * - 0 indicates DCT 0 |
| * - 2 both DCTs |
| * Node - Node number |
| * Func - PCI Function number |
| * Offset - PCI register number |
| * Low - Low bit of the bit field |
| * High - High bit of the bit field |
| * |
| * OUT value = Value read from PCI space |
| *----------------------------------------------------------------------------- |
| */ |
| static u32 get_Bits(sDCTStruct *pDCTData, |
| u8 dct, u8 node, u8 func, |
| u16 offset, u8 low, u8 high) |
| { |
| u32 temp; |
| uint32_t dword; |
| |
| /* ASSERT(node < MAX_NODES); */ |
| if (dct == BOTH_DCTS) |
| { |
| /* Registers exist on DCT0 only */ |
| if (is_fam15h()) |
| { |
| /* Select DCT 0 */ |
| AmdMemPCIRead(MAKE_SBDFO(0,0,24+node,1,0x10c), &dword); |
| dword &= ~0x1; |
| AmdMemPCIWrite(MAKE_SBDFO(0,0,24+node,1,0x10c), &dword); |
| } |
| |
| AmdMemPCIReadBits(MAKE_SBDFO(0,0,24+node,func,offset), high, low, &temp); |
| } |
| else |
| { |
| if (is_fam15h()) |
| { |
| /* Select DCT */ |
| AmdMemPCIRead(MAKE_SBDFO(0,0,24+node,1,0x10c), &dword); |
| dword &= ~0x1; |
| dword |= (dct & 0x1); |
| AmdMemPCIWrite(MAKE_SBDFO(0,0,24+node,1,0x10c), &dword); |
| |
| /* Read from the selected DCT */ |
| AmdMemPCIReadBits(MAKE_SBDFO(0,0,24+node,func,offset), high, low, &temp); |
| } |
| else |
| { |
| if (dct == 1) |
| { |
| /* Read from dct 1 */ |
| offset += 0x100; |
| AmdMemPCIReadBits(MAKE_SBDFO(0,0,24+node,func,offset), high, low, &temp); |
| } |
| else |
| { |
| /* Read from dct 0 */ |
| AmdMemPCIReadBits(MAKE_SBDFO(0,0,24+node,func,offset), high, low, &temp); |
| } |
| } |
| } |
| return temp; |
| } |
| |
| /*----------------------------------------------------------------------------- |
| * void set_Bits(DCTStruct *DCTData,u8 DCT,u8 Node,u8 func, u16 offset, |
| * u8 low, u8 high, u32 value) |
| * |
| * Description: |
| * This routine Sets the PCT bits from the specified Node, DCT and PCI address |
| * |
| * Parameters: |
| * IN OUT *DCTData - Pointer to buffer with information about each DCT |
| * IN DCT - DCT number |
| * - 1 indicates DCT 1 |
| * - 0 indicates DCT 0 |
| * - 2 both DCTs |
| * Node - Node number |
| * Func - PCI Function number |
| * Offset - PCI register number |
| * Low - Low bit of the bit field |
| * High - High bit of the bit field |
| * |
| * OUT |
| *----------------------------------------------------------------------------- |
| */ |
| static void set_Bits(sDCTStruct *pDCTData, |
| u8 dct, u8 node, u8 func, |
| u16 offset, u8 low, u8 high, u32 value) |
| { |
| u32 temp; |
| uint32_t dword; |
| |
| temp = value; |
| |
| if (dct == BOTH_DCTS) |
| { |
| /* Registers exist on DCT0 only */ |
| if (is_fam15h()) |
| { |
| /* Select DCT 0 */ |
| AmdMemPCIRead(MAKE_SBDFO(0,0,24+node,1,0x10c), &dword); |
| dword &= ~0x1; |
| AmdMemPCIWrite(MAKE_SBDFO(0,0,24+node,1,0x10c), &dword); |
| } |
| |
| AmdMemPCIWriteBits(MAKE_SBDFO(0,0,24+node,func,offset), high, low, &temp); |
| } |
| else |
| { |
| if (is_fam15h()) |
| { |
| /* Select DCT */ |
| AmdMemPCIRead(MAKE_SBDFO(0,0,24+node,1,0x10c), &dword); |
| dword &= ~0x1; |
| dword |= (dct & 0x1); |
| AmdMemPCIWrite(MAKE_SBDFO(0,0,24+node,1,0x10c), &dword); |
| |
| /* Write to the selected DCT */ |
| AmdMemPCIWriteBits(MAKE_SBDFO(0,0,24+node,func,offset), high, low, &temp); |
| } |
| else |
| { |
| if (dct == 1) |
| { |
| /* Write to dct 1 */ |
| offset += 0x100; |
| AmdMemPCIWriteBits(MAKE_SBDFO(0,0,24+node,func,offset), high, low, &temp); |
| } |
| else |
| { |
| /* Write to dct 0 */ |
| AmdMemPCIWriteBits(MAKE_SBDFO(0,0,24+node,func,offset), high, low, &temp); |
| } |
| } |
| } |
| } |
| |
| /*------------------------------------------------- |
| * u32 get_ADD_DCT_Bits(DCTStruct *DCTData,u8 DCT,u8 Node,u8 func, |
| * u16 offset,u8 low, u8 high) |
| * |
| * Description: |
| * This routine gets the Additional PCT register from Function 2 by specified |
| * Node, DCT and PCI address |
| * |
| * Parameters: |
| * IN OUT *DCTData - Pointer to buffer with information about each DCT |
| * IN DCT - DCT number |
| * - 1 indicates DCT 1 |
| * - 0 indicates DCT 0 |
| * - 2 both DCTs |
| * Node - Node number |
| * Func - PCI Function number |
| * Offset - Additional PCI register number |
| * Low - Low bit of the bit field |
| * High - High bit of the bit field |
| * |
| * OUT |
| *------------------------------------------------- |
| */ |
| static u32 get_ADD_DCT_Bits(sDCTStruct *pDCTData, |
| u8 dct, u8 node, u8 func, |
| u16 offset, u8 low, u8 high) |
| { |
| u32 tempD; |
| tempD = offset; |
| tempD = bitTestReset(tempD,DctAccessWrite); |
| set_Bits(pDCTData, dct, node, FUN_DCT, DRAM_CONTROLLER_ADD_DATA_OFFSET_REG, |
| PCI_MIN_LOW, PCI_MAX_HIGH, offset); |
| while ((get_Bits(pDCTData,dct, node, FUN_DCT, DRAM_CONTROLLER_ADD_DATA_OFFSET_REG, |
| DctAccessDone, DctAccessDone)) == 0); |
| return (get_Bits(pDCTData, dct, node, FUN_DCT, DRAM_CONTROLLER_ADD_DATA_PORT_REG, |
| low, high)); |
| } |
| |
| /*------------------------------------------------- |
| * void set_DCT_ADDR_Bits(DCTStruct *DCTData, u8 DCT,u8 Node,u8 func, |
| * u16 offset,u8 low, u8 high, u32 value) |
| * |
| * Description: |
| * This routine sets the Additional PCT register from Function 2 by specified |
| * Node, DCT and PCI address |
| * |
| * Parameters: |
| * IN OUT *DCTData - Pointer to buffer with information about each DCT |
| * IN DCT - DCT number |
| * - 1 indicates DCT 1 |
| * - 0 indicates DCT 0 |
| * - 2 both DCTs |
| * Node - Node number |
| * Func - PCI Function number |
| * Offset - Additional PCI register number |
| * Low - Low bit of the bit field |
| * High - High bit of the bit field |
| * |
| * OUT |
| *------------------------------------------------- |
| */ |
| static void set_DCT_ADDR_Bits(sDCTStruct *pDCTData, |
| u8 dct, u8 node, u8 func, |
| u16 offset, u8 low, u8 high, u32 value) |
| { |
| u32 tempD; |
| |
| set_Bits(pDCTData, dct, node, FUN_DCT, DRAM_CONTROLLER_ADD_DATA_OFFSET_REG, |
| PCI_MIN_LOW, PCI_MAX_HIGH, offset); |
| while ((get_Bits(pDCTData,dct, node, FUN_DCT, DRAM_CONTROLLER_ADD_DATA_OFFSET_REG, |
| DctAccessDone, DctAccessDone)) == 0); |
| |
| set_Bits(pDCTData, dct, node, FUN_DCT, DRAM_CONTROLLER_ADD_DATA_PORT_REG, |
| low, high, value); |
| tempD = offset; |
| tempD = bitTestSet(tempD,DctAccessWrite); |
| set_Bits(pDCTData, dct, node, FUN_DCT,DRAM_CONTROLLER_ADD_DATA_OFFSET_REG, |
| PCI_MIN_LOW, PCI_MAX_HIGH, tempD); |
| while ((get_Bits(pDCTData,dct, pDCTData->NodeId, FUN_DCT, |
| DRAM_CONTROLLER_ADD_DATA_OFFSET_REG, DctAccessDone, |
| DctAccessDone)) == 0); |
| } |
| |
| /*------------------------------------------------- |
| * BOOL bitTest(u32 value, u8 bitLoc) |
| * |
| * Description: |
| * This routine tests the value to determine if the bitLoc is set |
| * |
| * Parameters: |
| * IN Value - value to be tested |
| * bitLoc - bit location to be tested |
| * OUT TRUE - bit is set |
| * FALSE - bit is clear |
| *------------------------------------------------- |
| */ |
| static BOOL bitTest(u32 value, u8 bitLoc) |
| { |
| u32 tempD, compD; |
| tempD = value; |
| compD = 0; |
| compD = bitTestSet(compD,bitLoc); |
| tempD &= compD; |
| if (compD == tempD) |
| { |
| return TRUE; |
| } |
| else |
| { |
| return FALSE; |
| } |
| } |