| ## |
| ## This file is part of the coreboot project. |
| ## |
| ## Copyright (C) 2011-2013 Alexandru Gagniuc <mr.nuke.me@gmail.com> |
| ## |
| ## This program is free software: you can redistribute it and/or modify |
| ## it under the terms of the GNU General Public License as published by |
| ## the Free Software Foundation, either version 2 of the License, or |
| ## (at your option) any later version. |
| ## |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| ## |
| |
| chip northbridge/via/vx900 # Northbridge |
| register "assign_pex_to_dp" = "0" |
| register "pcie_port1_2_lane_wide" = "1" |
| register "ext_int_route_to_pirq" = "'H'" |
| |
| device cpu_cluster 0 on # APIC cluster |
| chip cpu/via/nano # VIA NANO |
| device lapic 0 on end # APIC |
| end |
| end |
| device domain 0 on |
| device pci 0.0 on end # [0410] Host controller |
| device pci 0.1 on end # [1410] Error Reporting |
| device pci 0.2 on end # [2410] CPU Bus Control |
| device pci 0.3 on end # [3410] DRAM Bus Control |
| device pci 0.4 on end # [4410] Power Management |
| device pci 0.5 on # [5410] APIC+Traffic Control |
| chip drivers/generic/ioapic |
| register "have_isa_interrupts" = "0" |
| register "irq_on_fsb" = "1" |
| register "enable_virtual_wire" = "1" |
| register "base" = "(void *)0xfecc0000" |
| device ioapic 2 on end |
| end |
| end |
| device pci 0.6 off end # [6410] Scratch Registers |
| device pci 0.7 on end # [7410] V4 Link Control |
| device pci 1.0 on # [7122] VGA Chrome9 HD |
| ioapic_irq 2 INTA 0x28 |
| end |
| device pci 1.1 on # [9170] Audio Device |
| ioapic_irq 2 INTA 0x29 |
| end |
| device pci 3.0 on end # [a410] PEX1 |
| device pci 3.1 on end # [b410] PEX2 |
| device pci 3.2 on end # [c410] PEX3 |
| device pci 3.3 on end # [d410] PEX4 |
| device pci 3.4 on end # [e410] PCIE bridge |
| device pci b.0 on end # [a409] USB Device |
| device pci c.0 off end # [95d0] SDIO Host Controller |
| device pci d.0 off end # [9530] Memory Card controller |
| device pci f.0 on # [9001] SATA Controller |
| ioapic_irq 1 INTA 0x15 |
| end |
| device pci 10.0 on end # [3038] USB 1.1 |
| device pci 10.1 on end # [3038] USB 1.1 |
| device pci 10.2 on end # [3038] USB 1.1 |
| device pci 10.3 on end # [3038] USB 1.1 |
| device pci 10.4 on end # [3104] USB 2.0 |
| device pci 11.0 on # [8410] LPC Bus Control |
| chip drivers/generic/ioapic |
| register "have_isa_interrupts" = "1" |
| register "irq_on_fsb" = "1" |
| register "enable_virtual_wire" = "1" |
| register "base" = "(void *)0xfec00000" |
| device ioapic 1 on end |
| end |
| #chip drivers/generic/generic # DIMM 0 channel 1 |
| # device i2c 50 on end |
| #end |
| #chip drivers/generic/generic # DIMM 1 channel 1 |
| # device i2c 51 on end |
| #end |
| chip superio/fintek/f81865f # Super duper IO |
| device pnp 4e.0 off end # Floppy |
| device pnp 4e.3 off end # Parallel Port |
| device pnp 4e.4 off end # Hardware Monitor |
| device pnp 4e.5 off end # Keyboard not here |
| device pnp 4e.6 off end # GPIO |
| device pnp 4e.a off end # PME |
| device pnp 4e.10 on # COM1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 4e.11 on # COM2 |
| io 0x60 = 0x2f8 |
| irq 0x70 = 3 |
| end |
| device pnp 4e.12 on # COM3 |
| io 0x60 = 0x3e8 |
| irq 0x70 = 10 |
| end |
| device pnp 4e.13 on # COM4 |
| io 0x60 = 0x2e8 |
| irq 0x70 = 11 |
| end |
| end # superio/fintek/f81865f |
| end # LPC |
| device pci 11.7 on end # [a353] North-South control |
| device pci 14.0 on end # [3288] Azalia HDAC |
| end |
| end |