| ## |
| ## This file is part of the coreboot project. |
| ## |
| ## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> |
| ## |
| ## This program is free software; you can redistribute it and/or modify |
| ## it under the terms of the GNU General Public License as published by |
| ## the Free Software Foundation; either version 2 of the License, or |
| ## (at your option) any later version. |
| ## |
| ## This program is distributed in the hope that it will be useful, |
| ## but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ## GNU General Public License for more details. |
| ## |
| |
| chip northbridge/intel/i440bx # Northbridge |
| device cpu_cluster 0 on # APIC cluster |
| chip cpu/intel/slot_1 # CPU |
| device lapic 0 on end # APIC |
| end |
| end |
| device domain 0 on # PCI domain |
| device pci 0.0 on end # Host bridge |
| device pci 1.0 on end # PCI/AGP bridge |
| chip southbridge/intel/i82371eb # Southbridge |
| device pci 7.0 on # ISA bridge |
| chip superio/winbond/w83977tf # Super I/O |
| device pnp 3f0.0 on # Floppy |
| io 0x60 = 0x3f0 |
| irq 0x70 = 6 |
| drq 0x74 = 2 |
| end |
| device pnp 3f0.1 on # Parallel port |
| io 0x60 = 0x378 |
| irq 0x70 = 7 |
| drq 0x74 = 3 |
| end |
| device pnp 3f0.2 on # COM1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 3f0.3 on # COM2 / IR |
| io 0x60 = 0x2f8 |
| irq 0x70 = 3 |
| end |
| device pnp 3f0.5 on # PS/2 keyboard |
| io 0x60 = 0x60 |
| io 0x62 = 0x64 |
| irq 0x70 = 1 # PS/2 keyboard interrupt |
| irq 0x72 = 12 # PS/2 mouse interrupt |
| end |
| device pnp 3f0.7 off # GPIO 1 |
| end |
| device pnp 3f0.8 off # GPIO 2 |
| end |
| device pnp 3f0.9 off # GPIO 3 |
| end |
| device pnp 3f0.a off # ACPI |
| end |
| end |
| end |
| device pci 7.1 on end # IDE |
| device pci 7.2 on end # USB |
| device pci 7.3 on end # ACPI |
| device pci 14.0 on end # Onboard audio (Ensoniq ES1371) |
| register "ide0_enable" = "1" |
| register "ide1_enable" = "1" |
| register "ide_legacy_enable" = "1" |
| # Enable UDMA/33 for higher speed if your IDE device(s) support it. |
| register "ide0_drive0_udma33_enable" = "1" |
| register "ide0_drive1_udma33_enable" = "1" |
| register "ide1_drive0_udma33_enable" = "1" |
| register "ide1_drive1_udma33_enable" = "1" |
| end |
| end |
| end |