| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2011 Advanced Micro Devices, Inc. |
| * Copyright (C) 2014 Sage Electronic Engineering, LLC. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <arch/io.h> |
| #include <cpu/x86/msr.h> |
| #include <device/pci_def.h> |
| #include <southbridge/amd/common/amd_pci_util.h> |
| #include <southbridge/amd/cimx/cimx_util.h> |
| #include <arch/acpi.h> |
| #include <northbridge/amd/agesa/BiosCallOuts.h> |
| #include <cpu/amd/agesa/s3_resume.h> |
| #include <cpu/amd/mtrr.h> |
| #include "SBPLATFORM.h" |
| #include <southbridge/amd/cimx/sb800/pci_devs.h> |
| #include <northbridge/amd/agesa/family14/pci_devs.h> |
| |
| void set_pcie_reset(void); |
| void set_pcie_dereset(void); |
| |
| /*********************************************************** |
| * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. |
| * This table is responsible for physically routing the PIC and |
| * IOAPIC IRQs to the different PCI devices on the system. It |
| * is read and written via registers 0xC00/0xC01 as an |
| * Index/Data pair. These values are chipset and mainboard |
| * dependent and should be updated accordingly. |
| * |
| * These values are used by the PCI configuration space, |
| * MP Tables. TODO: Make ACPI use these values too. |
| * |
| * The Persimmon PCI INTA/B/C/D pins are connected to |
| * FCH pins INTE/F/G/H on the schematic so these need |
| * to be routed as well. |
| */ |
| static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = { |
| /* INTA# - INTH# */ |
| [0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B, |
| /* Misc-nil,0,1,2, INT from Serial irq */ |
| [0x08] = 0x00,0xF0,0x00,0x00,0x1F,0x1F,0x1F,0x1F, |
| /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon */ |
| [0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F, |
| /* IMC INT0 - 5 */ |
| [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, |
| /* USB Devs 18/19/20/22 INTA-C */ |
| [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A, |
| /* IDE, SATA */ |
| [0x40] = 0x0B,0x0B, |
| /* GPPInt0 - 3 */ |
| [0x50] = 0x0A,0x0B,0x0A,0x0B |
| }; |
| |
| static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = { |
| /* INTA# - INTH# */ |
| [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, |
| /* Misc-nil,0,1,2, INT from Serial irq */ |
| [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, |
| /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon */ |
| [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F, |
| /* IMC INT0 - 5 */ |
| [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, |
| /* USB Devs 18/19/22/20 INTA-C */ |
| [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12, |
| /* IDE, SATA */ |
| [0x40] = 0x11,0x13, |
| /* GPPInt0 - 3 */ |
| [0x50] = 0x10,0x11,0x12,0x13 |
| }; |
| |
| /* |
| * This table defines the index into the picr/intr_data |
| * tables for each device. Any enabled device and slot |
| * that uses hardware interrupts should have an entry |
| * in this table to define its index into the FCH |
| * PCI_INTR register 0xC00/0xC01. This index will define |
| * the interrupt that it should use. Putting PIRQ_A into |
| * the PIN A index for a device will tell that device to |
| * use PIC IRQ 10 if it uses PIN A for its hardware INT. |
| */ |
| /* |
| * Persimmon has PCI slot INTA/B/C/D connected to PIRQE/F/G/H |
| * but because PCI INT_PIN swizzling isnt implemented to match |
| * the IDSEL (dev 3) of the slot, the table is adjusted for the |
| * swizzle and INTA is connected to PIRQH so PINA/B/C/D on |
| * off-chip devices should get mapped to PIRQH/E/F/G. |
| */ |
| static const struct pirq_struct mainboard_pirq_data[] = { |
| /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */ |
| {GFX_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */ |
| {NB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 04.0 */ |
| {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* PCIe bdg: 06.0 */ |
| {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */ |
| {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */ |
| {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */ |
| {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 13.0 */ |
| {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 13.2 */ |
| {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 14.0 */ |
| {IDE_DEVFN, {PIRQ_NC, PIRQ_IDE, PIRQ_NC, PIRQ_NC}}, /* IDE: 14.1 */ |
| {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */ |
| {SB_PCI_PORT_DEVFN, {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}}, /* PCI bdg: 14.4 */ |
| {OHCI4_DEVFN, {PIRQ_NC, PIRQ_NC, PIRQ_OHCI4, PIRQ_NC}}, /* OHCI4: 14.5 */ |
| {OHCI3_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3: 16.0 */ |
| {EHCI3_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3: 16.2 */ |
| }; |
| |
| /* PIRQ Setup */ |
| static void pirq_setup(void) |
| { |
| pirq_data_ptr = mainboard_pirq_data; |
| pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct); |
| intr_data_ptr = mainboard_intr_data; |
| picr_data_ptr = mainboard_picr_data; |
| } |
| |
| /** |
| * TODO |
| * SB CIMx callback |
| */ |
| void set_pcie_reset(void) |
| { |
| } |
| |
| /** |
| * TODO |
| * mainboard specific SB CIMx callback |
| */ |
| void set_pcie_dereset(void) |
| { |
| } |
| |
| |
| /********************************************** |
| * Enable the dedicated functions of the board. |
| **********************************************/ |
| static void mainboard_enable(device_t dev) |
| { |
| printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n"); |
| |
| /* enable GPP CLK0 thru CLK1 */ |
| /* disable GPP CLK2 thru SLT_GFX_CLK */ |
| u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE); |
| write8(misc_mem_clk_cntrl + 0, 0xFF); |
| write8(misc_mem_clk_cntrl + 1, 0x00); |
| write8(misc_mem_clk_cntrl + 2, 0x00); |
| write8(misc_mem_clk_cntrl + 3, 0x00); |
| write8(misc_mem_clk_cntrl + 4, 0x00); |
| |
| /* |
| * Initialize ASF registers to an arbitrary address because someone |
| * long ago set things up this way inside the SPD read code. The |
| * SPD read code has been made generic and moved out of the board |
| * directory, so the ASF init is being done here. |
| */ |
| pm_iowrite(0x29, 0x80); |
| pm_iowrite(0x28, 0x61); |
| |
| /* Initialize the PIRQ data structures for consumption */ |
| pirq_setup(); |
| } |
| |
| struct chip_operations mainboard_ops = { |
| .enable_dev = mainboard_enable, |
| }; |