| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <delay.h> |
| #include <intelblocks/power_limit.h> |
| #include <intelblocks/systemagent.h> |
| #include <soc/iomap.h> |
| #include <soc/soc_chip.h> |
| #include <soc/systemagent.h> |
| |
| /* |
| * SoC implementation |
| * |
| * Add all known fixed memory ranges for Host Controller/Memory |
| * controller. |
| */ |
| void soc_add_fixed_mmio_resources(struct device *dev, int *index) |
| { |
| static const struct sa_mmio_descriptor soc_fixed_resources[] = { |
| { PCIEXBAR, CONFIG_ECAM_MMCONF_BASE_ADDRESS, CONFIG_ECAM_MMCONF_LENGTH, |
| "PCIEXBAR" }, |
| { DMIBAR, DMI_BASE_ADDRESS, DMI_BASE_SIZE, "DMIBAR" }, |
| { EPBAR, EP_BASE_ADDRESS, EP_BASE_SIZE, "EPBAR" }, |
| { REGBAR, REG_BASE_ADDRESS, REG_BASE_SIZE, "REGBAR" }, |
| { EDRAMBAR, EDRAM_BASE_ADDRESS, EDRAM_BASE_SIZE, "EDRAMBAR" }, |
| }; |
| |
| sa_add_fixed_mmio_resources(dev, index, soc_fixed_resources, |
| ARRAY_SIZE(soc_fixed_resources)); |
| |
| /* Add Vt-d resources if VT-d is enabled */ |
| if ((pci_read_config32(dev, CAPID0_A) & VTD_DISABLE)) |
| return; |
| |
| sa_add_fixed_mmio_resources(dev, index, soc_vtd_resources, |
| ARRAY_SIZE(soc_vtd_resources)); |
| } |
| |
| /* |
| * SoC implementation |
| * |
| * Perform System Agent Initialization during Ramstage phase. |
| */ |
| void soc_systemagent_init(struct device *dev) |
| { |
| struct soc_power_limits_config *soc_config; |
| struct device *sa; |
| uint16_t sa_pci_id; |
| config_t *config; |
| |
| /* Enable Power Aware Interrupt Routing */ |
| enable_power_aware_intr(); |
| |
| config = config_of_soc(); |
| |
| /* Get System Agent PCI ID */ |
| sa = pcidev_path_on_root(PCI_DEVFN_ROOT); |
| sa_pci_id = sa ? pci_read_config16(sa, PCI_DEVICE_ID) : 0xFFFF; |
| |
| /* Choose a power limits configuration based on the SoC SKU type, |
| * differentiated here based on SA PCI ID. */ |
| switch (sa_pci_id) { |
| case PCI_DID_INTEL_MTL_P_ID_1: |
| soc_config = &config->power_limits_config[MTL_P_POWER_LIMITS_1]; |
| break; |
| case PCI_DID_INTEL_MTL_P_ID_2: |
| soc_config = &config->power_limits_config[MTL_P_POWER_LIMITS_2]; |
| break; |
| case PCI_DID_INTEL_MTL_P_ID_3: |
| soc_config = &config->power_limits_config[MTL_P_POWER_LIMITS_3]; |
| break; |
| case PCI_DID_INTEL_MTL_P_ID_4: |
| soc_config = &config->power_limits_config[MTL_P_POWER_LIMITS_4]; |
| break; |
| default: |
| printk(BIOS_ERR, "unknown SA ID: 0x%4x, skipping power limits configuration\n", |
| sa_pci_id); |
| return; |
| } |
| |
| /* Remove once commented line below is enabled */ |
| (void)soc_config; |
| /* UPDATEME: Need to enable later */ |
| //set_power_limits(MOBILE_SKU_PL1_TIME_SEC, soc_config); |
| } |
| |
| uint32_t soc_systemagent_max_chan_capacity_mib(u8 capid0_a_ddrsz) |
| { |
| switch (capid0_a_ddrsz) { |
| case 1: |
| return 8192; |
| case 2: |
| return 4096; |
| case 3: |
| return 2048; |
| default: |
| return 65536; |
| } |
| } |