| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2007-2008 coresystems GmbH |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <stdint.h> |
| #include <device/pci_def.h> |
| #include <device/pci_ops.h> |
| #include <cpu/x86/lapic.h> |
| #include <superio/smsc/lpc47m15x/lpc47m15x.h> |
| #include <console/console.h> |
| #include <arch/romstage.h> |
| #include <northbridge/intel/i945/i945.h> |
| #include <northbridge/intel/i945/raminit.h> |
| #include <southbridge/intel/i82801gx/i82801gx.h> |
| #include <southbridge/intel/common/pmclib.h> |
| |
| #define SERIAL_DEV PNP_DEV(0x2e, LPC47M15X_SP1) |
| #define PME_DEV PNP_DEV(0x2e, LPC47M15X_PME) |
| |
| static void rcba_config(void) |
| { |
| /* Set up virtual channel 0 */ |
| //RCBA32(0x0014) = 0x80000001; |
| |
| /* dev irq route register */ |
| RCBA16(D31IR) = 0x0132; |
| RCBA16(D30IR) = 0x0146; |
| RCBA16(D29IR) = 0x0237; |
| RCBA16(D28IR) = 0x3201; |
| RCBA16(D27IR) = 0x0146; |
| |
| /* Enable IOAPIC */ |
| RCBA8(OIC) = 0x03; |
| |
| /* Disable unused devices */ |
| RCBA32(FD) |= FD_INTLAN; |
| |
| /* Enable PCIe Root Port Clock Gate */ |
| // RCBA32(0x341c) = 0x00000001; |
| } |
| |
| static void early_ich7_init(void) |
| { |
| uint8_t reg8; |
| uint32_t reg32; |
| |
| // program secondary mlt XXX byte? |
| pci_write_config8(PCI_DEV(0, 0x1e, 0), SMLT, 0x20); |
| |
| // reset rtc power status |
| reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); |
| reg8 &= ~RTC_BATTERY_DEAD; |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); |
| |
| // usb transient disconnect |
| reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); |
| reg8 |= (3 << 0); |
| pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); |
| |
| reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); |
| reg32 |= (1 << 29) | (1 << 17); |
| pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); |
| |
| reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); |
| reg32 |= (1 << 31) | (1 << 27); |
| pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); |
| |
| ich7_setup_cir(); |
| } |
| |
| void mainboard_romstage_entry(void) |
| { |
| int s3resume = 0, boot_mode = 0; |
| |
| enable_lapic(); |
| |
| i82801gx_lpc_setup(); |
| /* Enable SuperIO PM */ |
| lpc47m15x_enable_serial(PME_DEV, 0x680); |
| lpc47m15x_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); /* 0x3f8 */ |
| |
| /* Set up the console */ |
| console_init(); |
| |
| if (MCHBAR16(SSKPD) == 0xCAFE) { |
| printk(BIOS_DEBUG, "soft reset detected.\n"); |
| boot_mode = 1; |
| } |
| |
| /* Perform some early chipset initialization required |
| * before RAM initialization can work |
| */ |
| i945_early_initialization(); |
| |
| s3resume = southbridge_detect_s3_resume(); |
| |
| /* Enable SPD ROMs and DDR-II DRAM */ |
| enable_smbus(); |
| |
| if (CONFIG(DEBUG_RAM_SETUP)) |
| dump_spd_registers(); |
| |
| sdram_initialize(s3resume ? 2 : boot_mode, NULL); |
| |
| /* Perform some initialization that must run before stage2 */ |
| early_ich7_init(); |
| |
| /* This should probably go away. Until now it is required |
| * and mainboard specific |
| */ |
| rcba_config(); |
| |
| /* Chipset Errata! */ |
| fixup_i945_errata(); |
| |
| /* Initialize the internal PCIe links before we go into stage2 */ |
| i945_late_initialization(s3resume); |
| } |