| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2015 Damien Zammit <damien@zamaudio.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /* Platform has no romstage entry point under mainboard directory, |
| * so this one is named with prefix mainboard. |
| */ |
| |
| #include <timestamp.h> |
| #include <console/console.h> |
| #include <device/pci_ops.h> |
| #include <cbmem.h> |
| #include <cf9_reset.h> |
| #include <romstage_handoff.h> |
| #include <southbridge/intel/i82801gx/i82801gx.h> |
| #include <southbridge/intel/common/pmclib.h> |
| #include <arch/romstage.h> |
| #include <cpu/x86/lapic.h> |
| #include "raminit.h" |
| #include "pineview.h" |
| |
| static void rcba_config(void) |
| { |
| /* Set up virtual channel 0 */ |
| RCBA32(0x0014) = 0x80000001; |
| RCBA32(0x001c) = 0x03128010; |
| } |
| |
| __weak void mb_pirq_setup(void) |
| { |
| } |
| |
| #define LPC_DEV PCI_DEV(0x0, 0x1f, 0x0) |
| |
| void mainboard_romstage_entry(void) |
| { |
| u8 spd_addrmap[4] = {}; |
| int boot_path, cbmem_was_initted; |
| int s3resume = 0; |
| |
| enable_lapic(); |
| |
| enable_smbus(); |
| |
| /* Perform some early chipset initialization required |
| * before RAM initialization can work |
| */ |
| i82801gx_early_init(); |
| pineview_early_initialization(); |
| |
| post_code(0x30); |
| |
| s3resume = southbridge_detect_s3_resume(); |
| |
| if (s3resume) { |
| boot_path = BOOT_PATH_RESUME; |
| } else { |
| if (MCHBAR32(0xf14) & (1 << 8)) /* HOT RESET */ |
| boot_path = BOOT_PATH_RESET; |
| else |
| boot_path = BOOT_PATH_NORMAL; |
| } |
| |
| get_mb_spd_addrmap(&spd_addrmap[0]); |
| |
| printk(BIOS_DEBUG, "Initializing memory\n"); |
| timestamp_add_now(TS_BEFORE_INITRAM); |
| sdram_initialize(boot_path, spd_addrmap); |
| timestamp_add_now(TS_AFTER_INITRAM); |
| printk(BIOS_DEBUG, "Memory initialized\n"); |
| |
| post_code(0x31); |
| |
| mb_pirq_setup(); |
| |
| rcba_config(); |
| |
| cbmem_was_initted = !cbmem_recovery(s3resume); |
| |
| if (!cbmem_was_initted && s3resume) { |
| /* Failed S3 resume, reset to come up cleanly */ |
| system_reset(); |
| } |
| |
| romstage_handoff_init(s3resume); |
| } |