| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <device/azalia_device.h> |
| |
| const u32 cim_verb_data[] = { |
| /* coreboot specific header */ |
| 0x10ec0256, // Codec Vendor / Device ID: Realtek ALC256 |
| 0x10ec12ac, // Subsystem ID |
| 0x0000001D, // Number of jacks (NID entries) |
| |
| AZALIA_RESET(0x1), |
| /* NID 0x01, HDA Codec Subsystem ID Verb table */ |
| AZALIA_SUBVENDOR(0, 0x10ec12ac), |
| |
| /* Pin Widget Verb Table */ |
| |
| /* |
| * DMIC |
| * Requirement is to use PCH DMIC. Hence, |
| * commented out codec's Internal DMIC. |
| * AZALIA_PIN_CFG(0, 0x12, 0x90A60130), |
| * AZALIA_PIN_CFG(0, 0x13, 0x40000000), |
| */ |
| |
| /* Pin widget 0x14 - Front (Port-D) */ |
| AZALIA_PIN_CFG(0, 0x14, 0x90170110), |
| /* Pin widget 0x18 - NPC */ |
| AZALIA_PIN_CFG(0, 0x18, 0x411111F0), |
| /* Pin widget 0x19 - MIC2 (Port-F) */ |
| AZALIA_PIN_CFG(0, 0x19, 0x04A11040), |
| /* Pin widget 0x1A - LINE1 (Port-C) */ |
| AZALIA_PIN_CFG(0, 0x1a, 0x411111F0), |
| /* Pin widget 0x1B - NPC */ |
| AZALIA_PIN_CFG(0, 0x1b, 0x411111F0), |
| /* Pin widget 0x1D - BEEP-IN */ |
| AZALIA_PIN_CFG(0, 0x1d, 0x40610041), |
| /* Pin widget 0x1E - NPC */ |
| AZALIA_PIN_CFG(0, 0x1e, 0x411111F0), |
| /* Pin widget 0x21 - HP1-OUT (Port-I) */ |
| AZALIA_PIN_CFG(0, 0x21, 0x04211020), |
| /* |
| * Widget node 0x20 - 1 |
| * Codec hidden reset and speaker power 2W/4ohm |
| */ |
| 0x0205001A, |
| 0x0204C003, |
| 0x02050038, |
| 0x02047901, |
| /* |
| * Widget node 0x20 - 2 |
| * Class D power on Reset |
| */ |
| 0x0205003C, |
| 0x02040354, |
| 0x0205003C, |
| 0x02040314, |
| /* |
| * Widget node 0x20 - 3 |
| * Disable AGC and set AGC limit to -1.5dB |
| */ |
| 0x02050016, |
| 0x02040C50, |
| 0x02050012, |
| 0x0204EBC1, |
| /* |
| * Widget node 0x20 - 4 |
| * Set AGC Post gain +1.5dB then Enable AGC |
| */ |
| 0x02050013, |
| 0x02044023, |
| 0x02050016, |
| 0x02040E50, |
| /* |
| * Widget node 0x20 - 5 |
| * Silence detector enabling + Set EAPD to verb control |
| */ |
| 0x02050037, |
| 0x0204FE15, |
| 0x02050010, |
| 0x02040020, |
| /* |
| * Widget node 0x20 - 6 |
| * Silence data mode Threshold (-90dB) |
| */ |
| 0x02050030, |
| 0x0204A000, |
| 0x0205001B, |
| 0x02040A4B, |
| /* |
| * Widget node 0x20 - 7 |
| * Default setting - 1 |
| */ |
| 0x05750003, |
| 0x05740DA3, |
| 0x02050046, |
| 0x02040004, |
| /* |
| * Widget node 0x20 - 8 |
| * support 1 pin detect two port |
| */ |
| 0x02050009, |
| 0x0204E003, |
| 0x0205000A, |
| 0x02047770, |
| /* |
| * Widget node 0x20 - 9 |
| * To set LDO1/LDO2 as default (used for headset) |
| */ |
| 0x02050008, |
| 0x02046A0C, |
| 0x02050008, |
| 0x02046A0C, |
| }; |
| |
| const u32 pc_beep_verbs[] = { |
| }; |
| |
| AZALIA_ARRAY_SIZES; |