| # SPDX-License-Identifier: GPL-2.0-only |
| |
| config PLATFORM_USES_FSP2_0 |
| bool |
| default n |
| help |
| Include FSP 2.0 wrappers and functionality |
| |
| config PLATFORM_USES_FSP2_1 |
| bool |
| default n |
| select PLATFORM_USES_FSP2_0 |
| select FSP_USES_CB_STACK |
| help |
| Include FSP 2.1 wrappers and functionality. |
| Feature added into FSP 2.1 specification that impacts coreboot is: |
| 1. Remove FSP stack switch and use the same stack with boot firmware |
| |
| config PLATFORM_USES_FSP2_2 |
| bool |
| default n |
| select PLATFORM_USES_FSP2_1 |
| help |
| Include FSP 2.2 wrappers and functionality. |
| Features added into FSP 2.2 specification that impact coreboot are: |
| 1. Added multi-phase silicon initialization to increase the modularity of the |
| FspSiliconInit() API |
| 2. FSP_INFO_HEADER changes to add FspMultiPhaseSiInitEntryOffset |
| 3. Added EnableMultiPhaseSiliconInit, bootloaders designed for FSP2.0/2.1 can disable |
| the FspMultiPhaseSiInit() API and continue to use FspSiliconInit() without change. |
| |
| config PLATFORM_USES_FSP2_3 |
| bool |
| default n |
| select PLATFORM_USES_FSP2_2 |
| help |
| Include FSP 2.3 wrappers and functionality. |
| Features added into FSP 2.3 specification that impact coreboot are: |
| 1. Added ExtendedImageRevision field in FSP_INFO_HEADER |
| 2. Added FSP_NON_VOLATILE_STORAGE_HOB2 |
| |
| config PLATFORM_USES_FSP2_4 |
| bool |
| default n |
| select PLATFORM_USES_FSP2_3 |
| help |
| Include FSP 2.4 wrappers and functionality. |
| Features added into FSP 2.4 specification that impact coreboot are: |
| 1. FSP-M multi phase init support |
| 2. FSPM_ARCH2_UPD and FSPS_ARCH2_UPD data structures must be |
| used in place of FSPM_ARCH_UPD and FSPS_ARCH_UPD respectively |
| 3. 64-bits support |
| |
| if PLATFORM_USES_FSP2_0 |
| |
| config PLATFORM_USES_FSP2_X86_32 |
| bool |
| default n if PLATFORM_USES_FSP2_4 |
| default y |
| help |
| Specify if the FSP binaries are 32-bits (yes) or 64-bits |
| (no). By default, 64-bit should be used starting with FSP |
| specification 2.4 |
| |
| config HAVE_INTEL_FSP_REPO |
| bool |
| help |
| Select this, if the FSP binaries for the platform are public |
| and available in 3rdparty/fsp/. When selecting this option, the |
| platform must also set FSP_HEADER_PATH and FSP_FD_PATH correctly. |
| |
| config FSP_USE_REPO |
| bool "Use binaries of the Intel FSP repository on GitHub" |
| depends on HAVE_INTEL_FSP_REPO |
| select FSP_FULL_FD |
| default y |
| help |
| Select this option to use the default FSP headers and binaries |
| found in the IntelFsp GitHub repository at |
| |
| https://github.com/IntelFsp/FSP/ |
| |
| If unsure, say Y. |
| |
| config FSP_HEADER_PATH |
| string "Location of FSP headers" if !FSP_USE_REPO |
| help |
| Include directory with the FSP ABI header files. |
| |
| config ADD_FSP_BINARIES |
| bool "Add Intel FSP 2.0 binaries to CBFS" if !FSP_USE_REPO |
| default y if FSP_USE_REPO |
| help |
| Add the FSP-M and FSP-S binaries to CBFS. |
| |
| config PLATFORM_USES_SECOND_FSP |
| bool |
| default n |
| help |
| The platform uses two sets of FSP-M/FSP-S binaries and selects the |
| appropriate one at runtime. At least one platform requires different |
| binaries depending on CPU stepping, so supporting any stepping |
| requires embedding two FSPs. The platform indicates which is the |
| "first" and "second" FSP. |
| |
| config FSP_T_CBFS |
| string "Name of FSP-T in CBFS" |
| depends on FSP_CAR |
| default "fspt.bin" |
| |
| config FSP_T_LOCATION |
| hex |
| default 0xfffe0000 |
| help |
| The location for FSP-T. |
| |
| config FSP_S_CBFS |
| string "Name of FSP-S in CBFS" |
| default "fsps.bin" |
| |
| config FSP_M_CBFS |
| string "Name of FSP-M in CBFS" |
| default "fspm.bin" |
| |
| config FSP_FULL_FD |
| bool "Use a combined FSP FD file" if !FSP_USE_REPO |
| depends on ADD_FSP_BINARIES |
| help |
| Use a combined FSP FD file instead of specifying individual, already split |
| binaries and split the file at build-time. |
| |
| config FSP_FD_PATH |
| string "Location of FSP FD file" if FSP_FULL_FD && !FSP_USE_REPO |
| help |
| Path to the FSP FD file that contains the individual FSP-T, FSP-M |
| and FSP-S binaries. The file gets split at build-time. |
| |
| config FSP_T_FILE |
| string "Intel FSP-T (temp RAM init) binary path and filename" if !FSP_FULL_FD |
| depends on ADD_FSP_BINARIES |
| depends on FSP_CAR |
| default "\$(obj)/Fsp_T.fd" if FSP_FULL_FD |
| help |
| The path and filename of the Intel FSP-T binary for this platform. |
| |
| config FSP_M_FILE |
| string "Intel FSP-M (memory init) binary path and filename" if !FSP_FULL_FD |
| depends on ADD_FSP_BINARIES |
| default "\$(obj)/Fsp_M.fd" if FSP_FULL_FD |
| help |
| The path and filename of the Intel FSP-M binary for this platform. |
| |
| config FSP_S_FILE |
| string "Intel FSP-S (silicon init) binary path and filename" if !FSP_FULL_FD |
| depends on ADD_FSP_BINARIES |
| default "\$(obj)/Fsp_S.fd" if FSP_FULL_FD |
| help |
| The path and filename of the Intel FSP-S binary for this platform. |
| |
| if PLATFORM_USES_SECOND_FSP |
| |
| config FSP_S_CBFS_2 |
| string "Name of the second FSP-S in CBFS" |
| default "fsps_2.bin" |
| |
| config FSP_M_CBFS_2 |
| string "Name of the second FSP-M in CBFS" |
| default "fspm_2.bin" |
| |
| config FSP_FD_PATH_2 |
| string "Location of the second FSP FD file" if FSP_FULL_FD && !FSP_USE_REPO |
| help |
| Path to the FSP FD file that contains the individual FSP-M and FSP-S |
| binaries. The file gets split at build-time. |
| |
| config FSP_M_FILE_2 |
| string "Intel FSP-M (memory init) second binary path and filename" if !FSP_FULL_FD |
| depends on ADD_FSP_BINARIES |
| default "\$(obj)/Fsp_2_M.fd" if FSP_FULL_FD |
| help |
| The path and filename of the second Intel FSP-M binary for this |
| platform. |
| |
| config FSP_S_FILE_2 |
| string "Intel FSP-S (silicon init) second binary path and filename" if !FSP_FULL_FD |
| depends on ADD_FSP_BINARIES |
| default "\$(obj)/Fsp_2_S.fd" if FSP_FULL_FD |
| help |
| The path and filename of the second Intel FSP-S binary for this |
| platform. |
| |
| endif |
| |
| config FSP_CAR |
| bool |
| default n |
| select NO_CBFS_MCACHE if !NO_FSP_TEMP_RAM_EXIT |
| help |
| Use FSP APIs to initialize & Tear Down the Cache-As-Ram |
| |
| config FSP_T_RESERVED_SIZE |
| hex |
| default 0x100 if FSP_CAR |
| default 0x0 |
| help |
| This is the size of the area reserved by FSP-T. This is not |
| defined in the FSP specification but in the SOC integration |
| guides. |
| |
| config NO_FSP_TEMP_RAM_EXIT |
| bool |
| depends on FSP_CAR |
| help |
| Select this on a platform where you want to use FSP-T but use |
| coreboot code to tear down CAR. |
| |
| config FSP_M_XIP |
| bool |
| default n |
| help |
| Select this value when FSP-M is execute-in-place. |
| |
| config FSP_T_XIP |
| bool |
| default n |
| help |
| Select this value when FSP-T is execute-in-place. |
| |
| config FSP_USES_CB_STACK |
| bool |
| default n |
| help |
| Enable support for fsp to use same stack as coreboot. |
| This option allows fsp to continue using coreboot stack |
| without reinitializing stack pointer. This feature is |
| supported Icelake onwards. |
| |
| config FSP_SPEC_VIOLATION_XEON_SP_HEAP_WORKAROUND |
| bool |
| help |
| Starting with Intel CPX there is a bug in there reference code during |
| the pipe init. This code synchronises the CAR between sockets in FSP-M. |
| This code implicitly assumes that the FSP heap is right above the |
| RC heap, where both of them are located at the bottom part of CAR. |
| Select this to have an explicit handling of the FSP StackBase to work |
| around this issue. This is needed on multi-socket Xeon-SP systems. |
| This will place the FSP heap right above the FSP-M RC heap. |
| |
| config FSP_TEMP_RAM_SIZE |
| hex |
| help |
| The amount of memory coreboot reserves for the FSP to use. In the |
| case of FSP 2.1 and newer that share the stack with coreboot instead |
| of having its own stack, this is the amount of anticipated heap usage |
| in CAR by FSP to setup HOB and needs to be the recommended value from |
| the Platform FSP integration guide. In the case of the FSP having its |
| own stack that will be placed in DRAM and not in CAR, this is the |
| amount of memory the FSP needs for its stack and heap. |
| |
| config FSP_PLATFORM_MEMORY_SETTINGS_VERSIONS |
| bool |
| help |
| This is selected by SoC or mainboard to supply their own |
| concept of a version for the memory settings respectively. |
| This allows deployed systems to bump their version number |
| with the same FSP which will trigger a retrain of the memory. |
| |
| config HAVE_FSP_LOGO_SUPPORT |
| bool |
| default n |
| |
| config BMP_LOGO |
| bool "Enable logo" |
| default n |
| depends on HAVE_FSP_LOGO_SUPPORT |
| help |
| Uses the FSP to display the boot logo. This method supports a |
| BMP file only. The uncompressed size can be up to 1 MB. The logo can |
| be compressed based on either `BMP_LOGO_COMPRESS_*` configs (default LZMA). |
| |
| config HAVE_BMP_LOGO_COMPRESS_LZMA |
| bool |
| depends on BMP_LOGO |
| default y |
| |
| choice |
| prompt "BMP Logo compression" |
| depends on BMP_LOGO |
| default BMP_LOGO_COMPRESS_LZMA if HAVE_BMP_LOGO_COMPRESS_LZMA |
| default BMP_LOGO_COMPRESS_LZ4 |
| |
| config BMP_LOGO_COMPRESS_LZMA |
| bool "Use LZMA compression for BMP logo" |
| help |
| This option enables the use of LZMA compression for the BMP logo. |
| LZMA is a lossless compression algorithm that can significantly reduce |
| the size of the logo, without sacrificing quality. |
| |
| If this option is not enabled, the BMP logo will be uncompressed. |
| |
| config BMP_LOGO_COMPRESS_LZ4 |
| bool "Compress BMP logo using LZ4" |
| help |
| This option enables compression of the BMP logo using the LZ4 algorithm. |
| Although the size reduction is not as efficient as LZMA compression, however, |
| it can also make the boot process slightly faster compared to the LZMA. |
| |
| endchoice |
| |
| config FSP2_0_LOGO_FILE_NAME |
| string "Logo file" |
| depends on BMP_LOGO |
| default "3rdparty/blobs/mainboard/\$(MAINBOARDDIR)/logo.bmp" |
| |
| config FSP_COMPRESS_FSP_S_LZMA |
| bool |
| |
| config FSP_COMPRESS_FSP_S_LZ4 |
| bool |
| |
| config FSP_COMPRESS_FSP_M_LZMA |
| bool |
| depends on !FSP_M_XIP |
| |
| config FSP_COMPRESS_FSP_M_LZ4 |
| bool |
| depends on !FSP_M_XIP |
| |
| config FSP_ALIGNMENT_FSP_S |
| int |
| help |
| Sets the CBFS alignment for FSP-S |
| |
| config FSP_ALIGNMENT_FSP_M |
| int |
| help |
| Sets the CBFS alignment for FSP-M |
| |
| config FSP_M_ADDR |
| hex |
| help |
| The address FSP-M will be relocated to during build time |
| |
| config FSP_STATUS_GLOBAL_RESET_REQUIRED_3 |
| bool |
| help |
| FSP Reset Status code used for global reset as per FSP EAS v2.0 section 11.2.2 |
| |
| config FSP_STATUS_GLOBAL_RESET_REQUIRED_4 |
| bool |
| help |
| FSP Reset Status code used for global reset as per FSP EAS v2.0 section 11.2.2 |
| |
| config FSP_STATUS_GLOBAL_RESET_REQUIRED_5 |
| bool |
| help |
| FSP Reset Status code used for global reset as per FSP EAS v2.0 section 11.2.2 |
| |
| config FSP_STATUS_GLOBAL_RESET_REQUIRED_6 |
| bool |
| help |
| FSP Reset Status code used for global reset as per FSP EAS v2.0 section 11.2.2 |
| |
| config FSP_STATUS_GLOBAL_RESET_REQUIRED_7 |
| bool |
| help |
| FSP Reset Status code used for global reset as per FSP EAS v2.0 section 11.2.2 |
| |
| config FSP_STATUS_GLOBAL_RESET_REQUIRED_8 |
| bool |
| help |
| FSP Reset Status code used for global reset as per FSP EAS v2.0 section 11.2.2 |
| |
| config FSP_STATUS_GLOBAL_RESET |
| hex |
| depends on SOC_INTEL_COMMON_FSP_RESET |
| default 0x40000003 if FSP_STATUS_GLOBAL_RESET_REQUIRED_3 |
| default 0x40000004 if FSP_STATUS_GLOBAL_RESET_REQUIRED_4 |
| default 0x40000005 if FSP_STATUS_GLOBAL_RESET_REQUIRED_5 |
| default 0x40000006 if FSP_STATUS_GLOBAL_RESET_REQUIRED_6 |
| default 0x40000007 if FSP_STATUS_GLOBAL_RESET_REQUIRED_7 |
| default 0x40000008 if FSP_STATUS_GLOBAL_RESET_REQUIRED_8 |
| default 0xffffffff |
| help |
| If global reset is supported by SoC then select the correct status value for global |
| reset type from SoC Kconfig based on available Kconfig options |
| FSP_STATUS_GLOBAL_RESET_REQUIRED_X. Default is unsupported. |
| |
| config SOC_INTEL_COMMON_FSP_RESET |
| bool |
| help |
| Common code block to handle platform reset request raised by FSP. The FSP |
| will use the FSP EAS v2.0 section 12.2.2 (OEM Status Code) to indicate that |
| a reset is required. |
| |
| config FSPS_HAS_ARCH_UPD |
| bool |
| help |
| SoC users must select this Kconfig if the `FSPS_UPD` header has architecture |
| UPD structure as `FSPS_ARCH_UPD`. Typically, platform with FSP 2.2 specification |
| onwards has support for `FSPS_ARCH_UPD` section as part of `FSPS_UPD` structure. |
| But there are some exceptions as in TGL, JSL, XEON_SP FSP header doesn't have |
| support for FSPS_ARCH_UPD. |
| |
| config FSPS_USE_MULTI_PHASE_INIT |
| bool |
| help |
| SoC users to select this Kconfig to set EnableMultiPhaseSiliconInit to enable and |
| execute FspMultiPhaseSiInit() API. |
| |
| config USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM |
| bool |
| help |
| The FSP API is used to notify the FSP about different phases in the boot process. |
| The current FSP specification supports three notify phases: |
| - Post PCI enumeration |
| - Ready to Boot |
| - End of Firmware |
| This option allows FSP to execute Notify Phase API (Post PCI enumeration). |
| SoC users can override this config to use coreboot native implementations |
| to perform the required lock down and chipset register configuration prior |
| to executing any 3rd-party code during PCI enumeration (i.e. Option ROM). |
| |
| coreboot native implementation to skip FSP Notify Phase (Post PCI enumeration) |
| is still WIP. |
| |
| config USE_FSP_NOTIFY_PHASE_READY_TO_BOOT |
| bool |
| help |
| The FSP API is used to notify the FSP about different phases in the boot process. |
| The current FSP specification supports three notify phases: |
| - Post PCI enumeration |
| - Ready to Boot |
| - End of Firmware |
| This option allows FSP to execute Notify Phase API (Ready to Boot). |
| SoC users can override this config to use coreboot native implementations |
| to perform the required lock down and chipset register configuration prior |
| boot to payload. |
| |
| config USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE |
| bool |
| help |
| The FSP API is used to notify the FSP about different phases in the boot process. |
| The current FSP specification supports three notify phases: |
| - Post PCI enumeration |
| - Ready to Boot |
| - End of Firmware |
| This option allows FSP to execute Notify Phase API (End of Firmware). |
| SoC users can override this config to use coreboot native implementations |
| to perform the required lock down and chipset register configuration prior |
| boot to payload. |
| |
| config FSP_USES_CB_DEBUG_EVENT_HANDLER |
| bool |
| default n |
| help |
| This option allows to create `Debug Event Handler` to print FSP debug messages |
| to output device using coreboot native implementation. |
| |
| config DISPLAY_FSP_TIMESTAMPS |
| bool "Display FSP Timestamps" |
| default n |
| help |
| Select this config to retrieve FSP timestamps from Firmware Performance Data Table |
| (FPDT) and display from ramstage after FSP-S is executed. |
| |
| To be able to use this, FSP has to be compiled with `PcdFspPerformanceEnable` set to |
| `TRUE`. |
| |
| config FSP_ENABLE_SERIAL_DEBUG |
| bool "Output FSP debug messages on serial console" |
| default y |
| depends on FSP_USES_CB_DEBUG_EVENT_HANDLER |
| help |
| Output FSP debug messages on serial console. |
| |
| The config option is selected based on your FSP configuration i.e., debug or |
| release. Enable this option from site-local to print FSP serial messages using |
| coreboot native debug driver when coreboot has integrated the debug FSP |
| binaries. coreboot disables serial messages when this config is not enabled. |
| |
| config FSP_NVS_DATA_POST_SILICON_INIT |
| bool |
| default n |
| help |
| Select this config to enable the workaround for Intel SoC platforms that |
| do not adhere to the FSP 2.x specification requirement, where the FSP |
| Silicon Init API produces Non-Volatile Storage (NVS) data instead of the |
| FSP-Memory Init API. |
| |
| According to the FSP 2.x specification (section 11.3), the FSP populates the |
| NVS data using the FSP_NON_VOLATILE_STORAGE_HOB and expects the boot firmware |
| to parse the FSP_NON_VOLATILE_STORAGE_HOB after the FspMemoryInit() API in API |
| mode. |
| |
| However, not all Intel SoC platforms that support the FSP 2.x specification |
| adhere to this requirement. For example, the FSP binary for XEON SP platform |
| produces NVS data (aka FSP_NON_VOLATILE_STORAGE_HOB) after the FspSiliconInit() |
| API. Therefore, attempting to locate NVS data after the FspMemoryInit() API on |
| these platforms would result in an error. Use this config to find the NVS data |
| and store it in Non-Volatile Storage after the FspSiliconInit() API. |
| |
| config FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN |
| bool |
| default n |
| depends on PLATFORM_USES_FSP2_2 |
| help |
| Select this config for Intel SoC platform where FSP MultiPhaseSiInit API is unable |
| to return ERROR status properly. |
| |
| The config option will be selected based on the target SoC platform and if the |
| problem existed inside the FSP MultiPhaseSiInit. At present the problem has only |
| reported with Alder Lake and Raptor Lake FSP where MultiPhaseSiInit API is unable |
| to return any ERROR status. |
| |
| endif |