| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <arch/exception.h> |
| #include <assert.h> |
| #include <console/console.h> |
| #include <bootmode.h> |
| #include <fmap.h> |
| #include <security/tpm/tspi/crtm.h> |
| #include <security/tpm/tss/vendor/cr50/cr50.h> |
| #include <security/vboot/misc.h> |
| #include <security/vboot/vbnv.h> |
| #include <security/vboot/tpm_common.h> |
| #include <string.h> |
| #include <timestamp.h> |
| #include <vb2_api.h> |
| #include <boot_device.h> |
| |
| #include "antirollback.h" |
| |
| /* The max hash size to expect is for SHA512. */ |
| #define VBOOT_MAX_HASH_SIZE VB2_SHA512_DIGEST_SIZE |
| |
| /* exports */ |
| |
| vb2_error_t vb2ex_read_resource(struct vb2_context *ctx, |
| enum vb2_resource_index index, |
| uint32_t offset, |
| void *buf, |
| uint32_t size) |
| { |
| struct region_device rdev; |
| const char *name; |
| |
| switch (index) { |
| case VB2_RES_GBB: |
| name = "GBB"; |
| break; |
| case VB2_RES_FW_VBLOCK: |
| if (vboot_is_firmware_slot_a(ctx)) |
| name = "VBLOCK_A"; |
| else |
| name = "VBLOCK_B"; |
| break; |
| default: |
| return VB2_ERROR_EX_READ_RESOURCE_INDEX; |
| } |
| |
| if (fmap_locate_area_as_rdev(name, &rdev)) |
| return VB2_ERROR_EX_READ_RESOURCE_SIZE; |
| |
| if (rdev_readat(&rdev, buf, offset, size) != size) |
| return VB2_ERROR_EX_READ_RESOURCE_SIZE; |
| |
| return VB2_SUCCESS; |
| } |
| |
| /* No-op stubs that can be overridden by SoCs with hardware crypto support. */ |
| __weak vb2_error_t vb2ex_hwcrypto_digest_init(enum vb2_hash_algorithm hash_alg, |
| uint32_t data_size) |
| { |
| return VB2_ERROR_EX_HWCRYPTO_UNSUPPORTED; |
| } |
| |
| __weak vb2_error_t vb2ex_hwcrypto_digest_extend(const uint8_t *buf, |
| uint32_t size) |
| { |
| BUG(); /* Should never get called if init() returned an error. */ |
| return VB2_ERROR_UNKNOWN; |
| } |
| |
| __weak vb2_error_t vb2ex_hwcrypto_digest_finalize(uint8_t *digest, |
| uint32_t digest_size) |
| { |
| BUG(); /* Should never get called if init() returned an error. */ |
| return VB2_ERROR_UNKNOWN; |
| } |
| |
| static int handle_digest_result(void *slot_hash, size_t slot_hash_sz) |
| { |
| int is_resume; |
| |
| /* |
| * Chrome EC is the only support for vboot_save_hash() & |
| * vboot_retrieve_hash(), if Chrome EC is not enabled then return. |
| */ |
| if (!CONFIG(EC_GOOGLE_CHROMEEC)) |
| return 0; |
| |
| /* |
| * Nothing to do since resuming on the platform doesn't require |
| * vboot verification again. |
| */ |
| if (!CONFIG(RESUME_PATH_SAME_AS_BOOT)) |
| return 0; |
| |
| /* |
| * Assume that if vboot doesn't start in bootblock verified |
| * RW memory init code is not employed. i.e. memory init code |
| * lives in RO CBFS. |
| */ |
| if (!CONFIG(VBOOT_STARTS_IN_BOOTBLOCK)) |
| return 0; |
| |
| is_resume = platform_is_resuming(); |
| |
| if (is_resume > 0) { |
| uint8_t saved_hash[VBOOT_MAX_HASH_SIZE]; |
| const size_t saved_hash_sz = sizeof(saved_hash); |
| |
| assert(slot_hash_sz == saved_hash_sz); |
| |
| printk(BIOS_DEBUG, "Platform is resuming.\n"); |
| |
| if (vboot_retrieve_hash(saved_hash, saved_hash_sz)) { |
| printk(BIOS_ERR, "Couldn't retrieve saved hash.\n"); |
| return -1; |
| } |
| |
| if (memcmp(saved_hash, slot_hash, slot_hash_sz)) { |
| printk(BIOS_ERR, "Hash mismatch on resume.\n"); |
| return -1; |
| } |
| } else if (is_resume < 0) |
| printk(BIOS_ERR, "Unable to determine if platform resuming.\n"); |
| |
| printk(BIOS_DEBUG, "Saving vboot hash.\n"); |
| |
| /* Always save the hash for the current boot. */ |
| if (vboot_save_hash(slot_hash, slot_hash_sz)) { |
| printk(BIOS_ERR, "Error saving vboot hash.\n"); |
| /* Though this is an error don't report it up since it could |
| * lead to a reboot loop. The consequence of this is that |
| * we will most likely fail resuming because of EC issues or |
| * the hash digest not matching. */ |
| return 0; |
| } |
| |
| return 0; |
| } |
| |
| static vb2_error_t hash_body(struct vb2_context *ctx, |
| struct region_device *fw_body) |
| { |
| uint64_t load_ts; |
| uint32_t remaining; |
| uint8_t block[CONFIG_VBOOT_HASH_BLOCK_SIZE]; |
| uint8_t hash_digest[VBOOT_MAX_HASH_SIZE]; |
| const size_t hash_digest_sz = sizeof(hash_digest); |
| size_t block_size = sizeof(block); |
| size_t offset; |
| vb2_error_t rv; |
| |
| /* Clear the full digest so that any hash digests less than the |
| * max have trailing zeros. */ |
| memset(hash_digest, 0, hash_digest_sz); |
| |
| /* |
| * Since loading the firmware and calculating its hash is intertwined, |
| * we use this little trick to measure them separately and pretend it |
| * was first loaded and then hashed in one piece with the timestamps. |
| * (This split won't make sense with memory-mapped media like on x86.) |
| */ |
| load_ts = timestamp_get(); |
| timestamp_add(TS_START_HASH_BODY, load_ts); |
| |
| remaining = region_device_sz(fw_body); |
| offset = 0; |
| |
| /* Start the body hash */ |
| rv = vb2api_init_hash(ctx, VB2_HASH_TAG_FW_BODY); |
| if (rv) |
| return rv; |
| |
| /* Extend over the body */ |
| while (remaining) { |
| uint64_t temp_ts; |
| if (block_size > remaining) |
| block_size = remaining; |
| |
| temp_ts = timestamp_get(); |
| if (rdev_readat(fw_body, block, offset, block_size) < 0) |
| return VB2_ERROR_UNKNOWN; |
| load_ts += timestamp_get() - temp_ts; |
| |
| rv = vb2api_extend_hash(ctx, block, block_size); |
| if (rv) |
| return rv; |
| |
| remaining -= block_size; |
| offset += block_size; |
| } |
| |
| timestamp_add(TS_DONE_LOADING, load_ts); |
| timestamp_add_now(TS_DONE_HASHING); |
| |
| /* Check the result (with RSA signature verification) */ |
| rv = vb2api_check_hash_get_digest(ctx, hash_digest, hash_digest_sz); |
| if (rv) |
| return rv; |
| |
| timestamp_add_now(TS_END_HASH_BODY); |
| |
| if (handle_digest_result(hash_digest, hash_digest_sz)) |
| return VB2_ERROR_UNKNOWN; |
| |
| return VB2_SUCCESS; |
| } |
| |
| static uint32_t extend_pcrs(struct vb2_context *ctx) |
| { |
| return vboot_extend_pcr(ctx, 0, BOOT_MODE_PCR) || |
| vboot_extend_pcr(ctx, 1, HWID_DIGEST_PCR); |
| } |
| |
| #define EC_EFS_BOOT_MODE_VERIFIED_RW 0x00 |
| #define EC_EFS_BOOT_MODE_UNTRUSTED_RO 0x01 |
| #define EC_EFS_BOOT_MODE_TRUSTED_RO 0x02 |
| |
| static const char *get_boot_mode_string(uint8_t boot_mode) |
| { |
| if (boot_mode == EC_EFS_BOOT_MODE_TRUSTED_RO) |
| return "TRUSTED_RO"; |
| else if (boot_mode == EC_EFS_BOOT_MODE_UNTRUSTED_RO) |
| return "UNTRUSTED_RO"; |
| else if (boot_mode == EC_EFS_BOOT_MODE_VERIFIED_RW) |
| return "VERIFIED_RW"; |
| else |
| return "UNDEFINED"; |
| } |
| |
| static void check_boot_mode(struct vb2_context *ctx) |
| { |
| uint8_t boot_mode; |
| int rv; |
| |
| rv = tlcl_cr50_get_boot_mode(&boot_mode); |
| switch (rv) { |
| case TPM_E_NO_SUCH_COMMAND: |
| printk(BIOS_WARNING, "Cr50 does not support GET_BOOT_MODE.\n"); |
| /* Proceed to legacy boot model. */ |
| return; |
| case TPM_SUCCESS: |
| break; |
| default: |
| printk(BIOS_ERR, |
| "Communication error in getting Cr50 boot mode.\n"); |
| if (ctx->flags & VB2_CONTEXT_RECOVERY_MODE) |
| /* Continue to boot in recovery mode */ |
| return; |
| vb2api_fail(ctx, VB2_RECOVERY_CR50_BOOT_MODE, rv); |
| vboot_save_data(ctx); |
| vboot_reboot(); |
| return; |
| } |
| |
| printk(BIOS_INFO, "Cr50 says boot_mode is %s(0x%02x).\n", |
| get_boot_mode_string(boot_mode), boot_mode); |
| |
| if (boot_mode == EC_EFS_BOOT_MODE_UNTRUSTED_RO) |
| ctx->flags |= VB2_CONTEXT_NO_BOOT; |
| else if (boot_mode == EC_EFS_BOOT_MODE_TRUSTED_RO) |
| ctx->flags |= VB2_CONTEXT_EC_TRUSTED; |
| } |
| |
| /** |
| * Verify and select the firmware in the RW image |
| * |
| * TODO: Avoid loading a stage twice (once in hash_body & again in load_stage). |
| * when per-stage verification is ready. |
| */ |
| void verstage_main(void) |
| { |
| struct vb2_context *ctx; |
| struct region_device fw_body; |
| vb2_error_t rv; |
| |
| timestamp_add_now(TS_START_VBOOT); |
| |
| /* Lockdown SPI flash controller if required */ |
| if (CONFIG(BOOTMEDIA_LOCK_IN_VERSTAGE)) |
| boot_device_security_lockdown(); |
| |
| /* Set up context and work buffer */ |
| ctx = vboot_get_context(); |
| |
| /* Initialize and read nvdata from non-volatile storage. */ |
| vbnv_init(ctx->nvdata); |
| |
| /* Set S3 resume flag if vboot should behave differently when selecting |
| * which slot to boot. This is only relevant to vboot if the platform |
| * does verification of memory init and thus must ensure it resumes with |
| * the same slot that it booted from. */ |
| if (CONFIG(RESUME_PATH_SAME_AS_BOOT) && |
| platform_is_resuming()) |
| ctx->flags |= VB2_CONTEXT_S3_RESUME; |
| |
| /* Read secdata from TPM. Initialize TPM if secdata not found. We don't |
| * check the return value here because vb2api_fw_phase1 will catch |
| * invalid secdata and tell us what to do (=reboot). */ |
| timestamp_add_now(TS_START_TPMINIT); |
| if (vboot_setup_tpm(ctx) == TPM_SUCCESS) { |
| antirollback_read_space_firmware(ctx); |
| antirollback_read_space_kernel(ctx); |
| } |
| timestamp_add_now(TS_END_TPMINIT); |
| |
| if (get_recovery_mode_switch()) { |
| ctx->flags |= VB2_CONTEXT_FORCE_RECOVERY_MODE; |
| if (CONFIG(VBOOT_DISABLE_DEV_ON_RECOVERY)) |
| ctx->flags |= VB2_CONTEXT_DISABLE_DEVELOPER_MODE; |
| } |
| |
| if (CONFIG(VBOOT_WIPEOUT_SUPPORTED) && |
| get_wipeout_mode_switch()) |
| ctx->flags |= VB2_CONTEXT_FORCE_WIPEOUT_MODE; |
| |
| if (CONFIG(VBOOT_LID_SWITCH) && !get_lid_switch()) |
| ctx->flags |= VB2_CONTEXT_NOFAIL_BOOT; |
| |
| /* Mainboard/SoC always initializes display. */ |
| if (!CONFIG(VBOOT_MUST_REQUEST_DISPLAY) || CONFIG(VBOOT_ALWAYS_ENABLE_DISPLAY)) |
| ctx->flags |= VB2_CONTEXT_DISPLAY_INIT; |
| |
| /* Do early init (set up secdata and NVRAM, load GBB) */ |
| printk(BIOS_INFO, "Phase 1\n"); |
| rv = vb2api_fw_phase1(ctx); |
| |
| if (rv) { |
| /* |
| * If vb2api_fw_phase1 fails, check for return value. |
| * If it is set to VB2_ERROR_API_PHASE1_RECOVERY, then continue |
| * into recovery mode. |
| * For any other error code, save context if needed and reboot. |
| */ |
| if (rv == VB2_ERROR_API_PHASE1_RECOVERY) { |
| printk(BIOS_INFO, "Recovery requested (%x)\n", rv); |
| vboot_save_data(ctx); |
| extend_pcrs(ctx); /* ignore failures */ |
| goto verstage_main_exit; |
| } |
| |
| printk(BIOS_INFO, "Reboot requested (%x)\n", rv); |
| vboot_save_data(ctx); |
| vboot_reboot(); |
| } |
| |
| /* Determine which firmware slot to boot (based on NVRAM) */ |
| printk(BIOS_INFO, "Phase 2\n"); |
| rv = vb2api_fw_phase2(ctx); |
| if (rv) { |
| printk(BIOS_INFO, "Reboot requested (%x)\n", rv); |
| vboot_save_data(ctx); |
| vboot_reboot(); |
| } |
| |
| /* Try that slot (verify its keyblock and preamble) */ |
| printk(BIOS_INFO, "Phase 3\n"); |
| timestamp_add_now(TS_START_VERIFY_SLOT); |
| rv = vb2api_fw_phase3(ctx); |
| timestamp_add_now(TS_END_VERIFY_SLOT); |
| if (rv) { |
| printk(BIOS_INFO, "Reboot requested (%x)\n", rv); |
| vboot_save_data(ctx); |
| vboot_reboot(); |
| } |
| |
| printk(BIOS_INFO, "Phase 4\n"); |
| rv = vboot_locate_firmware(ctx, &fw_body); |
| if (rv) |
| die_with_post_code(POST_INVALID_ROM, |
| "Failed to read FMAP to locate firmware"); |
| |
| rv = hash_body(ctx, &fw_body); |
| vboot_save_data(ctx); |
| if (rv) { |
| printk(BIOS_INFO, "Reboot requested (%x)\n", rv); |
| vboot_reboot(); |
| } |
| |
| /* Only extend PCRs once on boot. */ |
| if (!(ctx->flags & VB2_CONTEXT_S3_RESUME)) { |
| timestamp_add_now(TS_START_TPMPCR); |
| rv = extend_pcrs(ctx); |
| if (rv) { |
| printk(BIOS_WARNING, |
| "Failed to extend TPM PCRs (%#x)\n", rv); |
| vb2api_fail(ctx, VB2_RECOVERY_RO_TPM_U_ERROR, rv); |
| vboot_save_data(ctx); |
| vboot_reboot(); |
| } |
| timestamp_add_now(TS_END_TPMPCR); |
| } |
| |
| if (CONFIG(TPM_CR50)) |
| check_boot_mode(ctx); |
| |
| /* Lock TPM */ |
| |
| timestamp_add_now(TS_START_TPMLOCK); |
| rv = antirollback_lock_space_firmware(); |
| if (rv) { |
| printk(BIOS_INFO, "Failed to lock TPM (%x)\n", rv); |
| vb2api_fail(ctx, VB2_RECOVERY_RO_TPM_L_ERROR, 0); |
| vboot_save_data(ctx); |
| vboot_reboot(); |
| } |
| timestamp_add_now(TS_END_TPMLOCK); |
| |
| /* Lock rec hash space if available. */ |
| if (CONFIG(VBOOT_HAS_REC_HASH_SPACE)) { |
| rv = antirollback_lock_space_mrc_hash(MRC_REC_HASH_NV_INDEX); |
| if (rv) { |
| printk(BIOS_INFO, "Failed to lock rec hash space(%x)\n", |
| rv); |
| vb2api_fail(ctx, VB2_RECOVERY_RO_TPM_REC_HASH_L_ERROR, |
| 0); |
| vboot_save_data(ctx); |
| vboot_reboot(); |
| } |
| } |
| |
| printk(BIOS_INFO, "Slot %c is selected\n", |
| vboot_is_firmware_slot_a(ctx) ? 'A' : 'B'); |
| |
| verstage_main_exit: |
| timestamp_add_now(TS_END_VBOOT); |
| } |