| fw_config |
| field AUDIO_CODEC_SOURCE 41 43 |
| option AUDIO_CODEC_ALC5682I_VS 0 |
| option AUDIO_CODEC_ALC5682_VD 1 |
| end |
| end |
| |
| |
| chip soc/intel/jasperlake |
| |
| # Intel Common SoC Config |
| #+-------------------+---------------------------+ |
| #| Field | Value | |
| #+-------------------+---------------------------+ |
| #| GSPI0 | cr50 TPM. Early init is | |
| #| | required to set up a BAR | |
| #| | for TPM communication | |
| #| | before memory is up | |
| #| I2C4 | Audio | |
| #+-------------------+---------------------------+ |
| register "common_soc_config" = "{ |
| .gspi[0] = { |
| .speed_mhz = 1, |
| .early_init = 1, |
| }, |
| .i2c[4] = { |
| .speed_config[0] = { |
| .speed = I2C_SPEED_FAST, |
| .scl_lcnt = 190, |
| .scl_hcnt = 100, |
| .sda_hold = 40, |
| } |
| }, |
| }" |
| |
| # Power limit config |
| register "power_limits_config[JSL_N4500_6W_CORE]" = "{ |
| .tdp_pl1_override = 6, |
| .tdp_pl2_override = 20, |
| .tdp_pl4 = 60, |
| }" |
| |
| register "power_limits_config[JSL_N5100_6W_CORE]" = "{ |
| .tdp_pl1_override = 6, |
| .tdp_pl2_override = 20, |
| .tdp_pl4 = 60, |
| }" |
| |
| # Enable Root Port 3 (index 2) for LAN |
| # External PCIe port 7 is mapped to PCIe Root Port 3 |
| register "PcieRpEnable[2]" = "1" |
| register "PcieClkSrcUsage[4]" = "2" |
| |
| # Enable Root Port 7 (index 6) for WLAN |
| # External PCIe port 3 is mapped to PCIe Root Port 7 |
| register "PcieRpEnable[6]" = "1" |
| register "PcieClkSrcUsage[3]" = "6" |
| |
| # Disable PCIe Root Port 8 |
| register "PcieRpEnable[7]" = "0" |
| |
| # Audio related configurations |
| register "PchHdaAudioLinkDmicEnable[0]" = "0" |
| register "PchHdaAudioLinkDmicEnable[1]" = "0" |
| |
| # Disable SD card |
| register "sdcard_cd_gpio" = "0" |
| register "SdCardPowerEnableActiveHigh" = "0" |
| |
| # Disable eDP on port A |
| register "DdiPortAConfig" = "0" |
| |
| # Enable HPD and DDC for DDI port A |
| register "DdiPortAHpd" = "1" |
| register "DdiPortADdc" = "1" |
| |
| # Does not support external vnn power rail |
| register "disable_external_bypass_vr" = "1" |
| |
| # USB Port Configuration |
| register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port A0 |
| register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port A1 |
| register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Type-C Port C1 |
| |
| device domain 0 on |
| device pci 04.0 on |
| chip drivers/intel/dptf |
| ## Passive Policy |
| register "policies.passive" = "{ |
| [0] = DPTF_PASSIVE(CPU, CPU, 90, 10000), |
| [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 80, 60000), |
| [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 75, 15000), |
| [3] = DPTF_PASSIVE(CPU, TEMP_SENSOR_2, 55, 15000) |
| }" |
| |
| ## Critical Policy |
| register "policies.critical" = "{ |
| [0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN), |
| [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 90, SHUTDOWN), |
| [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 80, SHUTDOWN), |
| [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 80, SHUTDOWN) |
| }" |
| |
| register "controls.power_limits" = "{ |
| .pl1 = { |
| .min_power = 3000, |
| .max_power = 6000, |
| .time_window_min = 1 * MSECS_PER_SEC, |
| .time_window_max = 1 * MSECS_PER_SEC, |
| .granularity = 100, |
| }, |
| .pl2 = { |
| .min_power = 20000, |
| .max_power = 20000, |
| .time_window_min = 1 * MSECS_PER_SEC, |
| .time_window_max = 1 * MSECS_PER_SEC, |
| .granularity = 1000, |
| } |
| }" |
| |
| register "options.tsr[0].desc" = ""Memory"" |
| register "options.tsr[1].desc" = ""Power"" |
| register "options.tsr[2].desc" = ""Chassis"" |
| |
| ## Charger Performance Control (Control, mA) |
| register "controls.charger_perf" = "{ |
| [0] = { 255, 3000 }, |
| [1] = { 24, 1500 }, |
| [2] = { 16, 1000 }, |
| [3] = { 8, 500 } |
| }" |
| |
| device generic 0 on end |
| end |
| end # SA Thermal device |
| device pci 14.0 on |
| chip drivers/usb/acpi |
| # TODO (b/264960828) verify PLD values |
| device usb 0.0 on |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-C Port C0"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(1, 1)" |
| device usb 2.0 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Port A0"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(1, 2)" |
| device usb 2.1 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-A Port A1"" |
| register "type" = "UPC_TYPE_A" |
| register "group" = "ACPI_PLD_GROUP(1, 3)" |
| device usb 2.2 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB2 Type-C Port C1"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(1, 4)" |
| device usb 2.3 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-C Port C0"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(1, 1)" |
| device usb 3.0 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-C Port C1"" |
| register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" |
| register "group" = "ACPI_PLD_GROUP(1, 2)" |
| device usb 3.1 off end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-A Port A0"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(1, 3)" |
| device usb 3.2 on end |
| end |
| chip drivers/usb/acpi |
| register "desc" = ""USB3 Type-A Port A1"" |
| register "type" = "UPC_TYPE_USB3_A" |
| register "group" = "ACPI_PLD_GROUP(1, 4)" |
| device usb 3.3 on end |
| end |
| end |
| end |
| end # USB xHCI |
| device pci 15.0 off end # I2C 0 |
| device pci 15.1 off end # I2C 1 |
| device pci 15.2 off end # I2C 2 |
| device pci 15.3 off end # I2C 3 |
| device pci 19.0 on |
| chip drivers/i2c/generic |
| register "hid" = ""10EC5682"" |
| register "name" = ""RT58"" |
| register "desc" = ""Realtek RT5682"" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" |
| register "property_count" = "1" |
| register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" |
| register "property_list[0].name" = ""realtek,jd-src"" |
| register "property_list[0].integer" = "1" |
| device i2c 1a on |
| probe AUDIO_CODEC_SOURCE AUDIO_CODEC_ALC5682_VD |
| end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""RTL5682"" |
| register "name" = ""RT58"" |
| register "desc" = ""Realtek RT5682"" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D16)" |
| register "property_count" = "1" |
| register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" |
| register "property_list[0].name" = ""realtek,jd-src"" |
| register "property_list[0].integer" = "1" |
| device i2c 1a on |
| probe AUDIO_CODEC_SOURCE AUDIO_CODEC_ALC5682I_VS |
| end |
| end |
| end # I2C 4 |
| device pci 1c.2 on |
| chip drivers/net |
| register "customized_leds" = "0x05af" |
| register "wake" = "GPE0_DW0_03" # GPP_B3 |
| register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)" |
| register "device_index" = "0" |
| device pci 00.0 on end |
| end |
| end # PCI Express Root Port 3 - RTL8111H LAN |
| device pci 1c.6 on |
| chip drivers/wifi/generic |
| register "wake" = "GPE0_DW2_03" |
| device pci 00.0 on end |
| end |
| end # PCI Express Root Port 7 - WLAN |
| device pci 1c.7 off end # PCI Express Root Port 8 |
| device pci 1f.3 on end # Intel HDA |
| end |
| end |