| chip soc/intel/alderlake |
| |
| device cpu_cluster 0 on |
| device lapic 0 on end |
| end |
| |
| # GPE configuration |
| # Note that GPE events called out in ASL code rely on this |
| # route. i.e. If this route changes then the affected GPE |
| # offset bits also need to be changed. |
| register "pmc_gpe0_dw0" = "GPP_B" |
| register "pmc_gpe0_dw1" = "GPP_D" |
| register "pmc_gpe0_dw2" = "GPP_E" |
| |
| # FSP configuration |
| |
| register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" # Type-C Port1 |
| register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" # Type-C Port2 |
| register "usb2_ports[2]" = "USB2_PORT_MID(OC3)" # Type-C Port3 |
| register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WWAN |
| register "usb2_ports[4]" = "USB2_PORT_MID(OC3)" # Type-C Port4 |
| register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # FPS connector |
| register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port1 |
| register "usb2_ports[7]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port2 |
| register "usb2_ports[8]" = "USB2_PORT_MID(OC3)" # USB3/2 Type A port3 |
| register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WLAN |
| |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC3)" # USB3/2 Type A port1 |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port2 |
| register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port3 |
| register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # M.2 WWAN |
| |
| # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f |
| register "gen1_dec" = "0x00fc0801" |
| register "gen2_dec" = "0x000c0201" |
| # EC memory map range is 0x900-0x9ff |
| register "gen3_dec" = "0x00fc0901" |
| register "gen4_dec" = "0x000c0081" |
| |
| register "PrmrrSize" = "0" |
| |
| # Enable PCH PCIE RP 5 using CLK 2 |
| register "PcieRpEnable[4]" = "1" |
| register "PcieClkSrcClkReq[2]" = "2" |
| register "PcieClkSrcUsage[2]" = "0x4" |
| register "PcieRpClkReqDetect[4]" = "1" |
| |
| # Enable PCH PCIE RP 6 using CLK 5 |
| register "PcieRpEnable[5]" = "1" |
| register "PcieClkSrcClkReq[5]" = "5" |
| register "PcieClkSrcUsage[5]" = "0x5" |
| register "PcieRpClkReqDetect[5]" = "1" |
| |
| # Enable PCH PCIE RP 9 using CLK 1 |
| register "PcieRpEnable[8]" = "1" |
| register "PcieClkSrcClkReq[1]" = "1" |
| register "PcieClkSrcUsage[1]" = "0x8" |
| register "PcieRpClkReqDetect[8]" = "1" |
| |
| # Enable PCH PCIE RP 11 for optane |
| register "PcieRpEnable[10]" = "1" |
| # Hybrid storage mode |
| register "HybridStorageMode" = "1" |
| |
| # Enable CPU PCIE RP 1 using PEG CLK 0 |
| register "PcieClkSrcUsage[0]" = "0x40" |
| |
| # Enable PCU PCIE PEG Slot 1 and 2 |
| register "PcieClkSrcUsage[3]" = "0x41" |
| register "PcieClkSrcUsage[4]" = "0x42" |
| |
| # Mark LAN CLK pins as unused as GbE 0:0x1f.6 is disabled below |
| register "PcieClkSrcUsage[6]" = "0xff" |
| |
| register "SataSalpSupport" = "1" |
| |
| register "SataPortsEnable" = "{ |
| [0] = 1, |
| [1] = 1, |
| [2] = 1, |
| [3] = 1, |
| }" |
| |
| register "SataPortsDevSlp" = "{ |
| [0] = 1, |
| [1] = 1, |
| [2] = 1, |
| [3] = 1, |
| }" |
| |
| # Enable EDP in PortA |
| register "DdiPortAConfig" = "1" |
| # Enable HDMI in Port B |
| register "DdiPortBDdc" = "1" |
| register "DdiPortBHpd" = "1" |
| |
| # TCSS USB3 |
| register "TcssAuxOri" = "0" |
| |
| register "s0ix_enable" = "1" |
| |
| register "SerialIoI2cMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoPci, |
| [PchSerialIoIndexI2C1] = PchSerialIoPci, |
| [PchSerialIoIndexI2C2] = PchSerialIoPci, |
| [PchSerialIoIndexI2C3] = PchSerialIoPci, |
| [PchSerialIoIndexI2C4] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C5] = PchSerialIoPci, |
| }" |
| |
| register "SerialIoGSpiMode" = "{ |
| [PchSerialIoIndexGSPI0] = PchSerialIoPci, |
| [PchSerialIoIndexGSPI1] = PchSerialIoDisabled, |
| [PchSerialIoIndexGSPI2] = PchSerialIoDisabled, |
| [PchSerialIoIndexGSPI3] = PchSerialIoDisabled, |
| }" |
| |
| register "SerialIoGSpiCsMode" = "{ |
| [PchSerialIoIndexGSPI0] = 0, |
| [PchSerialIoIndexGSPI1] = 0, |
| [PchSerialIoIndexGSPI2] = 0, |
| [PchSerialIoIndexGSPI3] = 0, |
| }" |
| |
| register "SerialIoGSpiCsState" = "{ |
| [PchSerialIoIndexGSPI0] = 0, |
| [PchSerialIoIndexGSPI1] = 0, |
| [PchSerialIoIndexGSPI2] = 0, |
| [PchSerialIoIndexGSPI3] = 0, |
| }" |
| |
| register "SerialIoUartMode" = "{ |
| [PchSerialIoIndexUART0] = PchSerialIoSkipInit, |
| [PchSerialIoIndexUART1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUART2] = PchSerialIoDisabled, |
| }" |
| |
| # HD Audio |
| register "PchHdaDspEnable" = "1" |
| register "PchHdaAudioLinkHdaEnable" = "0" |
| register "PchHdaAudioLinkDmicEnable[0]" = "1" |
| register "PchHdaAudioLinkDmicEnable[1]" = "1" |
| register "PchHdaAudioLinkSndwEnable[0]" = "1" |
| register "PchHdaAudioLinkSndwEnable[1]" = "1" |
| # iDisp-Link T-Mode 0: 2T, 2: 4T, 3: 8T, 4: 16T |
| register "PchHdaIDispLinkTmode" = "2" |
| # iDisp-Link Freq 4: 96MHz, 3: 48MHz. |
| register "PchHdaIDispLinkFrequency" = "4" |
| # Not disconnected/enumerable |
| register "PchHdaIDispCodecDisconnect" = "0" |
| |
| # Intel Common SoC Config |
| register "common_soc_config" = "{ |
| .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, |
| .i2c[0] = { |
| .speed = I2C_SPEED_FAST, |
| }, |
| .i2c[1] = { |
| .speed = I2C_SPEED_FAST, |
| }, |
| .i2c[2] = { |
| .speed = I2C_SPEED_FAST, |
| }, |
| .i2c[3] = { |
| .speed = I2C_SPEED_FAST, |
| }, |
| .i2c[5] = { |
| .speed = I2C_SPEED_FAST, |
| }, |
| }" |
| |
| device domain 0 on |
| device pci 00.0 on end # Host Bridge |
| device pci 02.0 on end # Graphics |
| device pci 04.0 on end # DPTF |
| device pci 05.0 on end # IPU |
| device pci 06.0 on end # PEG60 |
| device pci 07.0 on end # TBT_PCIe0 |
| device pci 07.1 on end # TBT_PCIe1 |
| device pci 07.2 on end # TBT_PCIe2 |
| device pci 07.3 on end # TBT_PCIe3 |
| device pci 08.0 off end # GNA |
| device pci 09.0 off end # NPK |
| device pci 0a.0 off end # Crash-log SRAM |
| device pci 0d.0 on end # USB xHCI |
| device pci 0d.1 on end # USB xDCI (OTG) |
| device pci 0d.2 on end # TBT DMA0 |
| device pci 0d.3 on end # TBT DMA1 |
| device pci 0e.0 off end # VMD |
| device pci 10.0 off end |
| device pci 10.1 off end |
| device pci 10.2 on end # CNVi: BT |
| device pci 10.6 off end # THC0 |
| device pci 10.7 off end # THC1 |
| device pci 11.0 off end |
| device pci 11.1 off end |
| device pci 11.2 off end |
| device pci 11.3 off end |
| device pci 11.4 off end |
| device pci 11.5 off end |
| device pci 12.0 off end # SensorHUB |
| device pci 12.5 off end |
| device pci 12.6 off end # GSPI2 |
| device pci 13.0 off end # GSPI3 |
| device pci 13.1 off end |
| device pci 14.0 on |
| chip drivers/usb/acpi |
| register "desc" = ""Root Hub"" |
| register "type" = "UPC_TYPE_HUB" |
| device usb 0.0 on |
| chip drivers/usb/acpi |
| register "desc" = ""Bluetooth"" |
| register "type" = "UPC_TYPE_INTERNAL" |
| device usb 2.9 on end |
| end |
| end |
| end |
| end # USB3.1 xHCI |
| device pci 14.1 off end # USB3.1 xDCI |
| device pci 14.2 off end # Shared RAM |
| device pci 14.3 on |
| chip drivers/wifi/generic |
| register "wake" = "GPE0_PME_B0" |
| device generic 0 on end |
| end |
| end # CNVi: WiFi |
| device pci 15.0 on end # I2C0 |
| device pci 15.1 on end # I2C1 |
| device pci 15.2 on end # I2C2 |
| device pci 15.3 on end # I2C3 |
| device pci 16.0 on end # HECI1 |
| device pci 16.1 off end # HECI2 |
| device pci 16.2 off end # CSME |
| device pci 16.3 off end # CSME |
| device pci 16.4 off end # HECI3 |
| device pci 16.5 off end # HECI4 |
| device pci 17.0 on end # SATA |
| device pci 19.0 off end # I2C4 |
| device pci 19.1 on end # I2C5 |
| device pci 19.2 off end # UART2 |
| device pci 1c.0 on end # RP1 |
| device pci 1c.1 off end # RP2 |
| device pci 1c.2 off end # RP3 |
| device pci 1c.3 off end # RP4 |
| device pci 1c.4 on end # RP5 |
| device pci 1c.5 on end # RP6 |
| device pci 1c.6 off end # RP7 |
| device pci 1c.7 off end # RP8 |
| device pci 1d.0 on end # RP9 |
| device pci 1d.1 off end # RP10 |
| device pci 1d.2 on end # RP11 |
| device pci 1d.3 off end # RP12 |
| device pci 1e.0 on end # UART0 |
| device pci 1e.1 off end # UART1 |
| device pci 1e.2 on end # GSPI0 |
| device pci 1e.3 off end # GSPI1 |
| device pci 1f.0 on end # eSPI |
| device pci 1f.1 on end # P2SB |
| device pci 1f.2 hidden end # PMC |
| device pci 1f.3 on |
| chip drivers/intel/soundwire |
| device generic 0 on |
| chip drivers/soundwire/alc711 |
| # SoundWire Link 0 ID 1 |
| register "desc" = ""Headset Codec"" |
| device generic 0.1 on end |
| end |
| end |
| end |
| end # Intel Audio SNDW |
| device pci 1f.4 on end # SMBus |
| device pci 1f.5 on end # SPI |
| device pci 1f.6 off end # GbE |
| device pci 1f.7 off end # TH |
| end |
| end |