src/mainboard/system76/tgl-h/variants/oryp8/overridetree.cb

chip soc/intel/tigerlake
	# Power limits
	register "power_limits_config[POWER_LIMITS_H_8_CORE]" = "{
		.tdp_pl1_override = 45,
		.tdp_pl2_override = 90,
	}"
	register "power_limits_config[POWER_LIMITS_H_6_CORE]" = "{
		.tdp_pl1_override = 45,
		.tdp_pl2_override = 90,
	}"

	# Thermal
	register "tcc_offset" = "10"

	device domain 0 on
		subsystemid 0x1558 0x65f1 inherit

		device ref peg1 on
			# PCIe PEG1 x16, Clock 9 (DGPU)
			register "PcieClkSrcUsage[9]" = "0x41"
			register "PcieClkSrcClkReq[9]" = "9"
			chip soc/intel/common/block/pcie/rtd3
				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_F9)" # DGPU_PWR_EN
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_F8)" # DGPU_RST#_PCH
				register "enable_delay_ms" = "16"
				register "enable_off_delay_ms" = "4"
				register "reset_delay_ms" = "10"
				register "reset_off_delay_ms" = "4"
				register "srcclk_pin" = "9" # PEG_CLKREQ#
				device generic 0 on end
			end
		end
		device ref peg0 on
			# PCIe PEG0 x4, Clock 7 (SSD1)
			register "PcieClkSrcUsage[7]" = "0x40"
			register "PcieClkSrcClkReq[7]" = "7"
		end
		device ref tbt_pcie_rp0 on end # TYPEC1
		device ref north_xhci on # TYPEC1
			register "TcssXhciEn" = "1"
		end
		device ref tbt_dma0 on end # TYPEC1
		device ref south_xhci on
			# USB2
			register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.2 Gen 1 (Left)
			register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.2 Gen 1 (Right 1)
			register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.2 Gen 1 (Right 2)
			register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # Per-Key
			register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Camera
			register "usb2_ports[8]" = "USB2_PORT_TYPE_C(OC_SKIP)" # TYPEC1
			register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # Fingerprint
			register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
			# USB3
			register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.2 Gen 1 (Left)
			register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.2 Gen 1 (Right 1)
			register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.2 Gen 1 (Right 2)
		end
		device ref sata on
			register "SataPortsEnable[1]" = "1" # SSD2 (SATA1A)
		end
		device ref pcie_rp5 on
			# PCIe root port #5 x1, Clock 8 (GLAN)
			register "PcieRpEnable[4]" = "1"
			register "PcieRpLtrEnable[4]" = "1"
			register "PcieClkSrcUsage[8]" = "4"
			register "PcieClkSrcClkReq[8]" = "8"
		end
		device ref pcie_rp6 on
			# PCIe root port #6 x1, Clock 10 (CARD)
			register "PcieRpEnable[5]" = "1"
			register "PcieRpLtrEnable[5]" = "1"
			register "PcieClkSrcUsage[10]" = "5"
			register "PcieClkSrcClkReq[10]" = "10"
		end
		device ref pcie_rp8 on
			# PCIe root port #8 x1, Clock 2 (WLAN)
			register "PcieRpEnable[7]" = "1"
			register "PcieRpLtrEnable[7]" = "1"
			register "PcieClkSrcUsage[2]" = "7"
			register "PcieClkSrcClkReq[2]" = "2"
			register "PcieRpSlotImplemented[7]" = "1"
		end
		device ref pcie_rp9 on
			# PCIe root port #9 x4, Clock 6 (SSD2)
			register "PcieRpEnable[8]" = "1"
			register "PcieRpLtrEnable[8]" = "1"
			register "PcieClkSrcUsage[6]" = "8"
			register "PcieClkSrcClkReq[6]" = "6"
			register "PcieRpSlotImplemented[8]" = "1"
		end
		device ref smbus on
			chip drivers/i2c/tas5825m
				register "id" = "0"
				device i2c 4e on end # (8bit address: 0x9c)
			end
		end
	end
end