| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2014 Google Inc. |
| * Copyright (C) 2015 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc. |
| */ |
| |
| /* |
| * Helper functions for dealing with power management registers |
| * and the differences between PCH variants. |
| */ |
| |
| #include <arch/io.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_def.h> |
| #include <console/console.h> |
| #include <stdlib.h> |
| #include <soc/gpio.h> |
| #include <soc/iomap.h> |
| #include <soc/lpc.h> |
| #include <soc/pci_devs.h> |
| #include <soc/pm.h> |
| #include <soc/pmc.h> |
| #include <soc/smbus.h> |
| |
| /* Print status bits with descriptive names */ |
| static void print_status_bits(u32 status, const char *bit_names[]) |
| { |
| int i; |
| |
| if (!status) |
| return; |
| |
| for (i = 31; i >= 0; i--) { |
| if (status & (1 << i)) { |
| if (bit_names[i]) |
| printk(BIOS_DEBUG, "%s ", bit_names[i]); |
| else |
| printk(BIOS_DEBUG, "BIT%d ", i); |
| } |
| } |
| } |
| |
| /* Print status bits as GPIO numbers */ |
| static void print_gpio_status(u32 status, int start) |
| { |
| int i; |
| |
| if (!status) |
| return; |
| |
| for (i = 31; i >= 0; i--) { |
| if (status & (1 << i)) |
| printk(BIOS_DEBUG, "GPIO%d ", start + i); |
| } |
| } |
| |
| |
| /* |
| * PM1_CNT |
| */ |
| |
| /* Enable events in PM1 control register */ |
| void enable_pm1_control(u32 mask) |
| { |
| u32 pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT); |
| pm1_cnt |= mask; |
| outl(pm1_cnt, ACPI_BASE_ADDRESS + PM1_CNT); |
| } |
| |
| /* Disable events in PM1 control register */ |
| void disable_pm1_control(u32 mask) |
| { |
| u32 pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT); |
| pm1_cnt &= ~mask; |
| outl(pm1_cnt, ACPI_BASE_ADDRESS + PM1_CNT); |
| } |
| |
| |
| /* |
| * PM1 |
| */ |
| |
| /* Clear and return PM1 status register */ |
| static u16 reset_pm1_status(void) |
| { |
| u16 pm1_sts = inw(ACPI_BASE_ADDRESS + PM1_STS); |
| outw(pm1_sts, ACPI_BASE_ADDRESS + PM1_STS); |
| return pm1_sts; |
| } |
| |
| /* Print PM1 status bits */ |
| static u16 print_pm1_status(u16 pm1_sts) |
| { |
| const char *pm1_sts_bits[] = { |
| [0] = "TMROF", |
| [4] = "BM", |
| [5] = "GBL", |
| [8] = "PWRBTN", |
| [10] = "RTC", |
| [11] = "PRBTNOR", |
| [14] = "PCIEXPWAK", |
| [15] = "WAK", |
| }; |
| |
| if (!pm1_sts) |
| return 0; |
| |
| printk(BIOS_SPEW, "PM1_STS: "); |
| print_status_bits(pm1_sts, pm1_sts_bits); |
| printk(BIOS_SPEW, "\n"); |
| |
| return pm1_sts; |
| } |
| |
| /* Print, clear, and return PM1 status */ |
| u16 clear_pm1_status(void) |
| { |
| return print_pm1_status(reset_pm1_status()); |
| } |
| |
| /* Set the PM1 register to events */ |
| void enable_pm1(u16 events) |
| { |
| outw(events, ACPI_BASE_ADDRESS + PM1_EN); |
| } |
| |
| |
| /* |
| * SMI |
| */ |
| |
| /* Clear and return SMI status register */ |
| static u32 reset_smi_status(void) |
| { |
| u32 smi_sts = inl(ACPI_BASE_ADDRESS + SMI_STS); |
| outl(smi_sts, ACPI_BASE_ADDRESS + SMI_STS); |
| return smi_sts; |
| } |
| |
| /* Print SMI status bits */ |
| static u32 print_smi_status(u32 smi_sts) |
| { |
| const char *smi_sts_bits[] = { |
| [2] = "BIOS", |
| [3] = "LEGACY_USB", |
| [4] = "SLP_SMI", |
| [5] = "APM", |
| [6] = "SWSMI_TMR", |
| [8] = "PM1", |
| [9] = "GPE0", |
| [10] = "GPI", |
| [11] = "MCSMI", |
| [12] = "DEVMON", |
| [13] = "TCO", |
| [14] = "PERIODIC", |
| [15] = "SERIRQ_SMI", |
| [16] = "SMBUS_SMI", |
| [17] = "LEGACY_USB2", |
| [18] = "INTEL_USB2", |
| [20] = "PCI_EXP_SMI", |
| [21] = "MONITOR", |
| [26] = "SPI", |
| [27] = "GPIO_UNLOCK" |
| }; |
| |
| if (!smi_sts) |
| return 0; |
| |
| printk(BIOS_DEBUG, "SMI_STS: "); |
| print_status_bits(smi_sts, smi_sts_bits); |
| printk(BIOS_DEBUG, "\n"); |
| |
| return smi_sts; |
| } |
| |
| /* Print, clear, and return SMI status */ |
| u32 clear_smi_status(void) |
| { |
| return print_smi_status(reset_smi_status()); |
| } |
| |
| /* Enable SMI event */ |
| void enable_smi(u32 mask) |
| { |
| u32 smi_en = inl(ACPI_BASE_ADDRESS + SMI_EN); |
| smi_en |= mask; |
| outl(smi_en, ACPI_BASE_ADDRESS + SMI_EN); |
| } |
| |
| /* Disable SMI event */ |
| void disable_smi(u32 mask) |
| { |
| u32 smi_en = inl(ACPI_BASE_ADDRESS + SMI_EN); |
| smi_en &= ~mask; |
| outl(smi_en, ACPI_BASE_ADDRESS + SMI_EN); |
| } |
| |
| |
| /* |
| * ALT_GP_SMI |
| */ |
| |
| /* Clear GPIO SMI status and return events that are enabled and active */ |
| void reset_alt_smi_status(void) |
| { |
| /*Clear GPIO SMI Status*/ |
| gpio_clear_all_smi(); |
| } |
| |
| /* Print GPIO SMI status bits */ |
| static u32 print_alt_smi_status(void) |
| { |
| u32 alt_sts[GPIO_COMMUNITY_MAX]; |
| int gpio_index; |
| /* GPIO Communities GPP_A ~ E support SMI */ |
| const char gpiowell[] = { |
| [0] = 'A', |
| [1] = 'B', |
| [2] = 'C', |
| [3] = 'D', |
| [4] = 'E' |
| }; |
| |
| printk(BIOS_DEBUG, "ALT_STS: "); |
| gpio_get_smi_status(alt_sts); |
| /* GPP_A to GPP_E GPIO has Status and Enable functionality*/ |
| for (gpio_index = 0; gpio_index < ARRAY_SIZE(gpiowell); |
| gpio_index++) { |
| printk(BIOS_DEBUG, "GPIO Group_%c\n", |
| gpiowell[gpio_index]); |
| print_gpio_status(alt_sts[gpio_index], 0); |
| } |
| |
| printk(BIOS_DEBUG, "\n"); |
| |
| return 0; |
| } |
| |
| /* Print, clear, and return GPIO SMI status */ |
| u32 clear_alt_smi_status(void) |
| { |
| reset_alt_smi_status(); |
| return print_alt_smi_status(); |
| } |
| |
| /* Enable GPIO SMI events */ |
| void enable_alt_smi(int gpionum, u32 mask) |
| { |
| /*Set GPIO EN Status*/ |
| gpio_enable_groupsmi(gpionum, mask); |
| } |
| |
| |
| /* |
| * TCO |
| */ |
| |
| /* Clear TCO status and return events that are enabled and active */ |
| static u32 reset_tco_status(void) |
| { |
| u16 tco1_sts; |
| u16 tco2_sts; |
| u16 tcobase; |
| |
| tcobase = pmc_tco_regs(); |
| |
| /* TCO Status 2 register*/ |
| tco2_sts = inw(tcobase + TCO2_STS); |
| tco2_sts |= (TCO2_STS_SECOND_TO | TCO2_STS_BOOT); |
| outw(tco2_sts, tcobase + TCO2_STS); |
| |
| /* TCO Status 1 register*/ |
| tco1_sts = inw(tcobase + TCO1_STS); |
| |
| /* Clear SECOND_TO_STS bit */ |
| if (tco2_sts & TCO2_STS_SECOND_TO) |
| outw(tco2_sts & ~TCO2_STS_SECOND_TO, tcobase + TCO2_STS); |
| |
| return (tco2_sts << 16) | tco1_sts; |
| } |
| |
| /* Print TCO status bits */ |
| static u32 print_tco_status(u32 tco_sts) |
| { |
| const char *tco_sts_bits[] = { |
| [0] = "NMI2SMI", |
| [1] = "SW_TCO", |
| [2] = "TCO_INT", |
| [3] = "TIMEOUT", |
| [7] = "NEWCENTURY", |
| [8] = "BIOSWR", |
| [9] = "DMISCI", |
| [10] = "DMISMI", |
| [12] = "DMISERR", |
| [13] = "SLVSEL", |
| [16] = "INTRD_DET", |
| [17] = "SECOND_TO", |
| [18] = "BOOT", |
| [20] = "SMLINK_SLV" |
| }; |
| |
| if (!tco_sts) |
| return 0; |
| |
| printk(BIOS_DEBUG, "TCO_STS: "); |
| print_status_bits(tco_sts, tco_sts_bits); |
| printk(BIOS_DEBUG, "\n"); |
| |
| return tco_sts; |
| } |
| |
| /* Print, clear, and return TCO status */ |
| u32 clear_tco_status(void) |
| { |
| return print_tco_status(reset_tco_status()); |
| } |
| |
| /* Enable TCO SCI */ |
| void enable_tco_sci(void) |
| { |
| /* Clear pending events */ |
| outl(TCOSCI_STS, ACPI_BASE_ADDRESS + GPE0_STS(3)); |
| |
| /* Enable TCO SCI events */ |
| enable_gpe(TCOSCI_EN); |
| } |
| |
| |
| /* |
| * GPE0 |
| */ |
| |
| /* Clear a GPE0 status and return events that are enabled and active */ |
| static u32 reset_gpe(u16 sts_reg, u16 en_reg) |
| { |
| u32 gpe0_sts = inl(ACPI_BASE_ADDRESS + sts_reg); |
| u32 gpe0_en = inl(ACPI_BASE_ADDRESS + en_reg); |
| |
| outl(gpe0_sts, ACPI_BASE_ADDRESS + sts_reg); |
| |
| /* Only report enabled events */ |
| return gpe0_sts & gpe0_en; |
| } |
| |
| /* Print GPE0 status bits */ |
| static u32 print_gpe_status(u32 gpe0_sts, const char *bit_names[]) |
| { |
| if (!gpe0_sts) |
| return 0; |
| |
| printk(BIOS_DEBUG, "GPE0_STS: "); |
| print_status_bits(gpe0_sts, bit_names); |
| printk(BIOS_DEBUG, "\n"); |
| |
| return gpe0_sts; |
| } |
| |
| /* Print GPE0 GPIO status bits */ |
| static u32 print_gpe_gpio(u32 gpe0_sts, int start) |
| { |
| if (!gpe0_sts) |
| return 0; |
| |
| printk(BIOS_DEBUG, "GPE0_STS: "); |
| print_gpio_status(gpe0_sts, start); |
| printk(BIOS_DEBUG, "\n"); |
| |
| return gpe0_sts; |
| } |
| |
| /* Clear all GPE status and return "standard" GPE event status */ |
| u32 clear_gpe_status(void) |
| { |
| const char *gpe0_sts_3_bits[] = { |
| [1] = "HOTPLUG", |
| [2] = "SWGPE", |
| [6] = "TCO_SCI", |
| [7] = "SMB_WAK", |
| [9] = "PCI_EXP", |
| [10] = "BATLOW", |
| [11] = "PME", |
| [12] = "ME", |
| [13] = "PME_B0", |
| [16] = "GPIO27", |
| [18] = "WADT" |
| }; |
| |
| print_gpe_gpio(reset_gpe(GPE0_STS(GPE_31_0), GPE0_EN(GPE_31_0)), 0); |
| print_gpe_gpio(reset_gpe(GPE0_STS(GPE_63_32), GPE0_EN(GPE_63_32)), 32); |
| print_gpe_gpio(reset_gpe(GPE0_STS(GPE_94_64), GPE0_EN(GPE_94_64)), 64); |
| return print_gpe_status(reset_gpe(GPE0_STS(GPE_STD), GPE0_EN(GPE_STD)), |
| gpe0_sts_3_bits); |
| } |
| |
| /* Enable all requested GPE */ |
| void enable_all_gpe(u32 set1, u32 set2, u32 set3, u32 set4) |
| { |
| outl(set1, ACPI_BASE_ADDRESS + GPE0_EN(GPE_31_0)); |
| outl(set2, ACPI_BASE_ADDRESS + GPE0_EN(GPE_63_32)); |
| outl(set3, ACPI_BASE_ADDRESS + GPE0_EN(GPE_94_64)); |
| outl(set4, ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); |
| } |
| |
| /* Disable all GPE */ |
| void disable_all_gpe(void) |
| { |
| enable_all_gpe(0, 0, 0, 0); |
| } |
| |
| /* Enable a standard GPE */ |
| void enable_gpe(u32 mask) |
| { |
| u32 gpe0_en = inl(ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); |
| gpe0_en |= mask; |
| outl(gpe0_en, ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); |
| } |
| |
| /* Disable a standard GPE */ |
| void disable_gpe(u32 mask) |
| { |
| u32 gpe0_en = inl(ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); |
| gpe0_en &= ~mask; |
| outl(gpe0_en, ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); |
| } |
| |
| int acpi_sci_irq(void) |
| { |
| int scis = pci_read_config32(PCH_DEV_PMC, ACTL) & SCI_IRQ_SEL; |
| int sci_irq = 9; |
| |
| /* Determine how SCI is routed. */ |
| switch (scis) { |
| case SCIS_IRQ9: |
| case SCIS_IRQ10: |
| case SCIS_IRQ11: |
| sci_irq = scis - SCIS_IRQ9 + 9; |
| break; |
| case SCIS_IRQ20: |
| case SCIS_IRQ21: |
| case SCIS_IRQ22: |
| case SCIS_IRQ23: |
| sci_irq = scis - SCIS_IRQ20 + 20; |
| break; |
| default: |
| printk(BIOS_DEBUG, "Invalid SCI route! Defaulting to IRQ9.\n"); |
| sci_irq = 9; |
| break; |
| } |
| |
| printk(BIOS_DEBUG, "SCI is IRQ%d\n", sci_irq); |
| return sci_irq; |
| } |
| |
| uint8_t *pmc_mmio_regs(void) |
| { |
| uint32_t reg32; |
| |
| reg32 = pci_read_config32(PCH_DEV_PMC, PWRMBASE); |
| |
| /* 4KiB alignment. */ |
| reg32 &= ~0xfff; |
| |
| return (void *)(uintptr_t)reg32; |
| } |
| |
| uint16_t pmc_tco_regs(void) |
| { |
| uint16_t reg16; |
| |
| reg16 = pci_read_config16(PCH_DEV_SMBUS, TCOBASE); |
| |
| reg16 &= ~0x1f; |
| |
| return reg16; |
| } |