| /* |
| * This file is part of the coreboot project. |
| * |
| * It was originally based on the Linux kernel (arch/i386/kernel/pci-pc.c). |
| * |
| * Modifications are: |
| * Copyright (C) 2003 Eric Biederman <ebiederm@xmission.com> |
| * Copyright (C) 2003-2004 Linux Networx |
| * (Written by Eric Biederman <ebiederman@lnxi.com> for Linux Networx) |
| * Copyright (C) 2003 Ronald G. Minnich <rminnich@gmail.com> |
| * Copyright (C) 2004-2005 Li-Ta Lo <ollie@lanl.gov> |
| * Copyright (C) 2005-2006 Tyan |
| * (Written by Yinghai Lu <yhlu@tyan.com> for Tyan) |
| * Copyright (C) 2005-2006 Stefan Reinauer <stepan@openbios.org> |
| */ |
| |
| /* |
| * (c) 1999--2000 Martin Mares <mj@suse.cz> |
| */ |
| /* lots of mods by ron minnich (rminnich@lanl.gov), with |
| * the final architecture guidance from Tom Merritt (tjm@codegen.com) |
| * In particular, we changed from the one-pass original version to |
| * Tom's recommended multiple-pass version. I wasn't sure about doing |
| * it with multiple passes, until I actually started doing it and saw |
| * the wisdom of Tom's recommendations ... |
| * |
| * Lots of cleanups by Eric Biederman to handle bridges, and to |
| * handle resource allocation for non-pci devices. |
| */ |
| |
| #include <console/console.h> |
| #include <bitops.h> |
| #include <arch/io.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <device/pci_ids.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <smp/spinlock.h> |
| |
| /** Linked list of ALL devices */ |
| struct device *all_devices = &dev_root; |
| /** Pointer to the last device */ |
| extern struct device **last_dev_p; |
| |
| /** The upper limit of MEM resource of the devices. |
| * Reserve 20M for the system */ |
| #define DEVICE_MEM_HIGH 0xFEBFFFFFUL |
| /** The lower limit of IO resource of the devices. |
| * Reserve 4k for ISA/Legacy devices */ |
| #define DEVICE_IO_START 0x1000 |
| |
| /** |
| * @brief Allocate a new device structure. |
| * |
| * Allocte a new device structure and attached it to the device tree as a |
| * child of the parent bus. |
| * |
| * @param parent parent bus the newly created device attached to. |
| * @param path path to the device to be created. |
| * |
| * @return pointer to the newly created device structure. |
| * |
| * @see device_path |
| */ |
| static spinlock_t dev_lock = SPIN_LOCK_UNLOCKED; |
| device_t alloc_dev(struct bus *parent, struct device_path *path) |
| { |
| device_t dev, child; |
| int link; |
| |
| spin_lock(&dev_lock); |
| |
| /* Find the last child of our parent */ |
| for(child = parent->children; child && child->sibling; ) { |
| child = child->sibling; |
| } |
| |
| dev = malloc(sizeof(*dev)); |
| if (dev == 0) { |
| die("DEV: out of memory.\n"); |
| } |
| memset(dev, 0, sizeof(*dev)); |
| memcpy(&dev->path, path, sizeof(*path)); |
| |
| /* Initialize the back pointers in the link fields */ |
| for(link = 0; link < MAX_LINKS; link++) { |
| dev->link[link].dev = dev; |
| dev->link[link].link = link; |
| } |
| |
| /* By default devices are enabled */ |
| dev->enabled = 1; |
| |
| /* Add the new device to the list of children of the bus. */ |
| dev->bus = parent; |
| if (child) { |
| child->sibling = dev; |
| } else { |
| parent->children = dev; |
| } |
| |
| /* Append a new device to the global device list. |
| * The list is used to find devices once everything is set up. |
| */ |
| *last_dev_p = dev; |
| last_dev_p = &dev->next; |
| |
| spin_unlock(&dev_lock); |
| return dev; |
| } |
| |
| /** |
| * @brief round a number up to an alignment. |
| * @param val the starting value |
| * @param roundup Alignment as a power of two |
| * @returns rounded up number |
| */ |
| static resource_t round(resource_t val, unsigned long pow) |
| { |
| resource_t mask; |
| mask = (1ULL << pow) - 1ULL; |
| val += mask; |
| val &= ~mask; |
| return val; |
| } |
| |
| /** Read the resources on all devices of a given bus. |
| * @param bus bus to read the resources on. |
| */ |
| static void read_resources(struct bus *bus) |
| { |
| struct device *curdev; |
| |
| printk_spew("%s read_resources bus %d link: %d\n", |
| dev_path(bus->dev), bus->secondary, bus->link); |
| |
| /* Walk through all of the devices and find which resources they need. */ |
| for(curdev = bus->children; curdev; curdev = curdev->sibling) { |
| unsigned links; |
| int i; |
| if (curdev->have_resources) { |
| continue; |
| } |
| if (!curdev->enabled) { |
| continue; |
| } |
| if (!curdev->ops || !curdev->ops->read_resources) { |
| printk_err("%s missing read_resources\n", |
| dev_path(curdev)); |
| continue; |
| } |
| curdev->ops->read_resources(curdev); |
| curdev->have_resources = 1; |
| /* Read in subtractive resources behind the current device */ |
| links = 0; |
| for(i = 0; i < curdev->resources; i++) { |
| struct resource *resource; |
| unsigned link; |
| resource = &curdev->resource[i]; |
| if (!(resource->flags & IORESOURCE_SUBTRACTIVE)) |
| continue; |
| link = IOINDEX_SUBTRACTIVE_LINK(resource->index); |
| if (link > MAX_LINKS) { |
| printk_err("%s subtractive index on link: %d\n", |
| dev_path(curdev), link); |
| continue; |
| } |
| if (!(links & (1 << link))) { |
| links |= (1 << link); |
| read_resources(&curdev->link[link]); |
| } |
| } |
| } |
| printk_spew("%s read_resources bus %d link: %d done\n", |
| dev_path(bus->dev), bus->secondary, bus->link); |
| } |
| |
| struct pick_largest_state { |
| struct resource *last; |
| struct device *result_dev; |
| struct resource *result; |
| int seen_last; |
| }; |
| |
| static void pick_largest_resource(void *gp, |
| struct device *dev, struct resource *resource) |
| { |
| struct pick_largest_state *state = gp; |
| struct resource *last; |
| last = state->last; |
| /* Be certain to pick the successor to last */ |
| if (resource == last) { |
| state->seen_last = 1; |
| return; |
| } |
| if (resource->flags & IORESOURCE_FIXED ) return; //skip it |
| if (last && ( |
| (last->align < resource->align) || |
| ((last->align == resource->align) && |
| (last->size < resource->size)) || |
| ((last->align == resource->align) && |
| (last->size == resource->size) && |
| (!state->seen_last)))) { |
| return; |
| } |
| if (!state->result || |
| (state->result->align < resource->align) || |
| ((state->result->align == resource->align) && |
| (state->result->size < resource->size))) |
| { |
| state->result_dev = dev; |
| state->result = resource; |
| } |
| } |
| |
| static struct device *largest_resource(struct bus *bus, struct resource **result_res, |
| unsigned long type_mask, unsigned long type) |
| { |
| struct pick_largest_state state; |
| |
| state.last = *result_res; |
| state.result_dev = 0; |
| state.result = 0; |
| state.seen_last = 0; |
| |
| search_bus_resources(bus, type_mask, type, pick_largest_resource, &state); |
| |
| *result_res = state.result; |
| return state.result_dev; |
| } |
| |
| /* Compute allocate resources is the guts of the resource allocator. |
| * |
| * The problem. |
| * - Allocate resources locations for every device. |
| * - Don't overlap, and follow the rules of bridges. |
| * - Don't overlap with resources in fixed locations. |
| * - Be efficient so we don't have ugly strategies. |
| * |
| * The strategy. |
| * - Devices that have fixed addresses are the minority so don't |
| * worry about them too much. Instead only use part of the address |
| * space for devices with programmable addresses. This easily handles |
| * everything except bridges. |
| * |
| * - PCI devices are required to have thier sizes and their alignments |
| * equal. In this case an optimal solution to the packing problem |
| * exists. Allocate all devices from highest alignment to least |
| * alignment or vice versa. Use this. |
| * |
| * - So we can handle more than PCI run two allocation passes on |
| * bridges. The first to see how large the resources are behind |
| * the bridge, and what their alignment requirements are. The |
| * second to assign a safe address to the devices behind the |
| * bridge. This allows me to treat a bridge as just a device with |
| * a couple of resources, and not need to special case it in the |
| * allocator. Also this allows handling of other types of bridges. |
| * |
| */ |
| |
| void compute_allocate_resource( |
| struct bus *bus, |
| struct resource *bridge, |
| unsigned long type_mask, |
| unsigned long type) |
| { |
| struct device *dev; |
| struct resource *resource; |
| resource_t base; |
| unsigned long align, min_align; |
| min_align = 0; |
| base = bridge->base; |
| |
| printk_spew("%s compute_allocate_resource %s: base: %08Lx size: %08Lx align: %d gran: %d\n", |
| dev_path(bus->dev), |
| (bridge->flags & IORESOURCE_IO)? "io": |
| (bridge->flags & IORESOURCE_PREFETCH)? "prefmem" : "mem", |
| base, bridge->size, bridge->align, bridge->gran); |
| |
| /* We want different minimum alignments for different kinds of |
| * resources. These minimums are not device type specific |
| * but resource type specific. |
| */ |
| if (bridge->flags & IORESOURCE_IO) { |
| min_align = log2(DEVICE_IO_ALIGN); |
| } |
| if (bridge->flags & IORESOURCE_MEM) { |
| min_align = log2(DEVICE_MEM_ALIGN); |
| } |
| |
| /* Make certain I have read in all of the resources */ |
| read_resources(bus); |
| |
| /* Remember I haven't found anything yet. */ |
| resource = 0; |
| |
| /* Walk through all the devices on the current bus and |
| * compute the addresses. |
| */ |
| while((dev = largest_resource(bus, &resource, type_mask, type))) { |
| resource_t size; |
| /* Do NOT I repeat do not ignore resources which have zero size. |
| * If they need to be ignored dev->read_resources should not even |
| * return them. Some resources must be set even when they have |
| * no size. PCI bridge resources are a good example of this. |
| */ |
| /* Make certain we are dealing with a good minimum size */ |
| size = resource->size; |
| align = resource->align; |
| if (align < min_align) { |
| align = min_align; |
| } |
| |
| /* Propagate the resource alignment to the bridge register */ |
| if (align > bridge->align) { |
| bridge->align = align; |
| } |
| |
| if (resource->flags & IORESOURCE_FIXED) { |
| continue; |
| } |
| |
| /* Propogate the resource limit to the bridge register */ |
| if (bridge->limit > resource->limit) { |
| bridge->limit = resource->limit; |
| } |
| #warning This heuristic should be replaced by real devices with fixed resources. |
| /* Artificially deny limits between DEVICE_MEM_HIGH and 0xffffffff */ |
| if ((bridge->limit > DEVICE_MEM_HIGH) && (bridge->limit <= 0xffffffff)) { |
| bridge->limit = DEVICE_MEM_HIGH; |
| } |
| |
| if (resource->flags & IORESOURCE_IO) { |
| /* Don't allow potential aliases over the |
| * legacy pci expansion card addresses. |
| * The legacy pci decodes only 10 bits, |
| * uses 100h - 3ffh. Therefor, only 0 - ff |
| * can be used out of each 400h block of io |
| * space. |
| */ |
| if ((base & 0x300) != 0) { |
| base = (base & ~0x3ff) + 0x400; |
| } |
| /* Don't allow allocations in the VGA IO range. |
| * PCI has special cases for that. |
| */ |
| else if ((base >= 0x3b0) && (base <= 0x3df)) { |
| base = 0x3e0; |
| } |
| } |
| if (((round(base, align) + size) -1) <= resource->limit) { |
| /* base must be aligned to size */ |
| base = round(base, align); |
| resource->base = base; |
| resource->flags |= IORESOURCE_ASSIGNED; |
| resource->flags &= ~IORESOURCE_STORED; |
| base += size; |
| |
| printk_spew("%s %02lx * [0x%08Lx - 0x%08Lx] %s\n", |
| dev_path(dev), |
| resource->index, |
| resource->base, |
| resource->base + resource->size - 1, |
| (resource->flags & IORESOURCE_IO)? "io": |
| (resource->flags & IORESOURCE_PREFETCH)? "prefmem": "mem"); |
| } |
| #if CONFIG_PCIE_CONFIGSPACE_HOLE |
| #warning Handle PCIe hole differently... |
| if (base >= 0xf0000000 && base < 0xf4000000) { |
| base = 0xf4000000; |
| } |
| #endif |
| } |
| /* A pci bridge resource does not need to be a power |
| * of two size, but it does have a minimum granularity. |
| * Round the size up to that minimum granularity so we |
| * know not to place something else at an address postitively |
| * decoded by the bridge. |
| */ |
| bridge->size = round(base, bridge->gran) - bridge->base; |
| |
| printk_spew("%s compute_allocate_resource %s: base: %08Lx size: %08Lx align: %d gran: %d done\n", |
| dev_path(bus->dev), |
| (bridge->flags & IORESOURCE_IO)? "io": |
| (bridge->flags & IORESOURCE_PREFETCH)? "prefmem" : "mem", |
| base, bridge->size, bridge->align, bridge->gran); |
| |
| |
| } |
| |
| #if CONFIG_CONSOLE_VGA == 1 |
| device_t vga_pri = 0; |
| static void allocate_vga_resource(void) |
| { |
| #warning "FIXME modify allocate_vga_resource so it is less pci centric!" |
| #warning "This function knows to much about PCI stuff, it should be just a ietrator/visitor." |
| |
| /* FIXME handle the VGA pallette snooping */ |
| struct device *dev, *vga, *vga_onboard, *vga_first, *vga_last; |
| struct bus *bus; |
| bus = 0; |
| vga = 0; |
| vga_onboard = 0; |
| vga_first = 0; |
| vga_last = 0; |
| for(dev = all_devices; dev; dev = dev->next) { |
| if (!dev->enabled) continue; |
| if (((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) && |
| ((dev->class >> 8) != PCI_CLASS_DISPLAY_OTHER)) |
| { |
| if (!vga_first) { |
| if (dev->on_mainboard) { |
| vga_onboard = dev; |
| } else { |
| vga_first = dev; |
| } |
| } else { |
| if (dev->on_mainboard) { |
| vga_onboard = dev; |
| } else { |
| vga_last = dev; |
| } |
| } |
| |
| /* It isn't safe to enable other VGA cards */ |
| dev->command &= ~(PCI_COMMAND_MEMORY | PCI_COMMAND_IO); |
| } |
| } |
| |
| vga = vga_last; |
| |
| if(!vga) { |
| vga = vga_first; |
| } |
| |
| #if CONFIG_CONSOLE_VGA_ONBOARD_AT_FIRST == 1 |
| if (vga_onboard) // will use on board vga as pri |
| #else |
| if (!vga) // will use last add on adapter as pri |
| #endif |
| { |
| vga = vga_onboard; |
| } |
| |
| |
| if (vga) { |
| /* vga is first add on card or the only onboard vga */ |
| printk_debug("Allocating VGA resource %s\n", dev_path(vga)); |
| /* All legacy VGA cards have MEM & I/O space registers */ |
| vga->command |= (PCI_COMMAND_MEMORY | PCI_COMMAND_IO); |
| vga_pri = vga; |
| bus = vga->bus; |
| } |
| /* Now walk up the bridges setting the VGA enable */ |
| while(bus) { |
| printk_debug("Setting PCI_BRIDGE_CTL_VGA for bridge %s\n", |
| dev_path(bus->dev)); |
| bus->bridge_ctrl |= PCI_BRIDGE_CTL_VGA; |
| bus = (bus == bus->dev->bus)? 0 : bus->dev->bus; |
| } |
| } |
| |
| #endif |
| |
| |
| /** |
| * @brief Assign the computed resources to the devices on the bus. |
| * |
| * @param bus Pointer to the structure for this bus |
| * |
| * Use the device specific set_resources method to store the computed |
| * resources to hardware. For bridge devices, the set_resources() method |
| * has to recurse into every down stream buses. |
| * |
| * Mutual recursion: |
| * assign_resources() -> device_operation::set_resources() |
| * device_operation::set_resources() -> assign_resources() |
| */ |
| void assign_resources(struct bus *bus) |
| { |
| struct device *curdev; |
| |
| printk_spew("%s assign_resources, bus %d link: %d\n", |
| dev_path(bus->dev), bus->secondary, bus->link); |
| |
| for(curdev = bus->children; curdev; curdev = curdev->sibling) { |
| if (!curdev->enabled || !curdev->resources) { |
| continue; |
| } |
| if (!curdev->ops || !curdev->ops->set_resources) { |
| printk_err("%s missing set_resources\n", |
| dev_path(curdev)); |
| continue; |
| } |
| curdev->ops->set_resources(curdev); |
| } |
| printk_spew("%s assign_resources, bus %d link: %d\n", |
| dev_path(bus->dev), bus->secondary, bus->link); |
| } |
| |
| /** |
| * @brief Enable the resources for a specific device |
| * |
| * @param dev the device whose resources are to be enabled |
| * |
| * Enable resources of the device by calling the device specific |
| * enable_resources() method. |
| * |
| * The parent's resources should be enabled first to avoid having enabling |
| * order problem. This is done by calling the parent's enable_resources() |
| * method and let that method to call it's children's enable_resoruces() |
| * method via the (global) enable_childrens_resources(). |
| * |
| * Indirect mutual recursion: |
| * enable_resources() -> device_operations::enable_resource() |
| * device_operations::enable_resource() -> enable_children_resources() |
| * enable_children_resources() -> enable_resources() |
| */ |
| void enable_resources(struct device *dev) |
| { |
| if (!dev->enabled) { |
| return; |
| } |
| if (!dev->ops || !dev->ops->enable_resources) { |
| printk_err("%s missing enable_resources\n", dev_path(dev)); |
| return; |
| } |
| dev->ops->enable_resources(dev); |
| } |
| |
| /** |
| * @brief Reset all of the devices a bus |
| * |
| * Reset all of the devices on a bus and clear the bus's reset_needed flag. |
| * |
| * @param bus pointer to the bus structure |
| * |
| * @return 1 if the bus was successfully reset, 0 otherwise. |
| * |
| */ |
| int reset_bus(struct bus *bus) |
| { |
| if (bus && bus->dev && bus->dev->ops && bus->dev->ops->reset_bus) |
| { |
| bus->dev->ops->reset_bus(bus); |
| bus->reset_needed = 0; |
| return 1; |
| } |
| return 0; |
| } |
| |
| /** |
| * @brief Scan for devices on a bus. |
| * |
| * If there are bridges on the bus, recursively scan the buses behind the bridges. |
| * If the setting up and tuning of the bus causes a reset to be required, |
| * reset the bus and scan it again. |
| * |
| * @param bus pointer to the bus device |
| * @param max current bus number |
| * |
| * @return The maximum bus number found, after scanning all subordinate busses |
| */ |
| unsigned int scan_bus(device_t bus, unsigned int max) |
| { |
| unsigned int new_max; |
| int do_scan_bus; |
| if ( !bus || |
| !bus->enabled || |
| !bus->ops || |
| !bus->ops->scan_bus) |
| { |
| return max; |
| } |
| do_scan_bus = 1; |
| while(do_scan_bus) { |
| int link; |
| new_max = bus->ops->scan_bus(bus, max); |
| do_scan_bus = 0; |
| for(link = 0; link < bus->links; link++) { |
| if (bus->link[link].reset_needed) { |
| if (reset_bus(&bus->link[link])) { |
| do_scan_bus = 1; |
| } else { |
| bus->bus->reset_needed = 1; |
| } |
| } |
| } |
| } |
| return new_max; |
| } |
| |
| |
| /** |
| * @brief Determine the existence of devices and extend the device tree. |
| * |
| * Most of the devices in the system are listed in the mainboard Config.lb |
| * file. The device structures for these devices are generated at compile |
| * time by the config tool and are organized into the device tree. This |
| * function determines if the devices created at compile time actually exist |
| * in the physical system. |
| * |
| * For devices in the physical system but not listed in the Config.lb file, |
| * the device structures have to be created at run time and attached to the |
| * device tree. |
| * |
| * This function starts from the root device 'dev_root', scan the buses in |
| * the system recursively, modify the device tree according to the result of |
| * the probe. |
| * |
| * This function has no idea how to scan and probe buses and devices at all. |
| * It depends on the bus/device specific scan_bus() method to do it. The |
| * scan_bus() method also has to create the device structure and attach |
| * it to the device tree. |
| */ |
| void dev_enumerate(void) |
| { |
| struct device *root; |
| unsigned subordinate; |
| printk_info("Enumerating buses...\n"); |
| root = &dev_root; |
| if (root->chip_ops && root->chip_ops->enable_dev) { |
| root->chip_ops->enable_dev(root); |
| } |
| if (!root->ops || !root->ops->scan_bus) { |
| printk_err("dev_root missing scan_bus operation"); |
| return; |
| } |
| subordinate = scan_bus(root, 0); |
| printk_info("done\n"); |
| } |
| |
| /** |
| * @brief Configure devices on the devices tree. |
| * |
| * Starting at the root of the device tree, travel it recursively in two |
| * passes. In the first pass, we compute and allocate resources (ranges) |
| * requried by each device. In the second pass, the resources ranges are |
| * relocated to their final position and stored to the hardware. |
| * |
| * I/O resources start at DEVICE_IO_START and grow upward. MEM resources start |
| * at DEVICE_MEM_HIGH and grow downward. |
| * |
| * Since the assignment is hierarchical we set the values into the dev_root |
| * struct. |
| */ |
| void dev_configure(void) |
| { |
| struct resource *io, *mem; |
| struct device *root; |
| |
| printk_info("Allocating resources...\n"); |
| |
| root = &dev_root; |
| if (!root->ops || !root->ops->read_resources) { |
| printk_err("dev_root missing read_resources\n"); |
| return; |
| } |
| if (!root->ops || !root->ops->set_resources) { |
| printk_err("dev_root missing set_resources\n"); |
| return; |
| } |
| |
| printk_info("Reading resources...\n"); |
| root->ops->read_resources(root); |
| printk_info("Done reading resources.\n"); |
| |
| /* Get the resources */ |
| io = &root->resource[0]; |
| mem = &root->resource[1]; |
| /* Make certain the io devices are allocated somewhere safe. */ |
| io->base = DEVICE_IO_START; |
| io->flags |= IORESOURCE_ASSIGNED; |
| io->flags &= ~IORESOURCE_STORED; |
| /* Now reallocate the pci resources memory with the |
| * highest addresses I can manage. |
| */ |
| mem->base = resource_max(&root->resource[1]); |
| mem->flags |= IORESOURCE_ASSIGNED; |
| mem->flags &= ~IORESOURCE_STORED; |
| |
| #if CONFIG_CONSOLE_VGA == 1 |
| /* Allocate the VGA I/O resource.. */ |
| allocate_vga_resource(); |
| #endif |
| |
| /* Store the computed resource allocations into device registers ... */ |
| printk_info("Setting resources...\n"); |
| root->ops->set_resources(root); |
| printk_info("Done setting resources.\n"); |
| #if 0 |
| mem->flags |= IORESOURCE_STORED; |
| report_resource_stored(root, mem, ""); |
| #endif |
| |
| printk_info("Done allocating resources.\n"); |
| } |
| |
| /** |
| * @brief Enable devices on the device tree. |
| * |
| * Starting at the root, walk the tree and enable all devices/bridges by |
| * calling the device's enable_resources() method. |
| */ |
| void dev_enable(void) |
| { |
| printk_info("Enabling resources...\n"); |
| |
| /* now enable everything. */ |
| enable_resources(&dev_root); |
| |
| printk_info("done.\n"); |
| } |
| |
| /** |
| * @brief Initialize all devices in the global device list. |
| * |
| * Starting at the first device on the global device link list, |
| * walk the list and call the device's init() method to do deivce |
| * specific setup. |
| */ |
| void dev_initialize(void) |
| { |
| struct device *dev; |
| |
| printk_info("Initializing devices...\n"); |
| for(dev = all_devices; dev; dev = dev->next) { |
| if (dev->enabled && !dev->initialized && |
| dev->ops && dev->ops->init) |
| { |
| if (dev->path.type == DEVICE_PATH_I2C) { |
| printk_debug("smbus: %s[%d]->", |
| dev_path(dev->bus->dev), dev->bus->link); |
| } |
| printk_debug("%s init\n", dev_path(dev)); |
| dev->initialized = 1; |
| dev->ops->init(dev); |
| } |
| } |
| printk_info("Devices initialized\n"); |
| } |
| |