| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2007 Juergen Beisert <juergen@kreuzholzen.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| /** |
| * @file |
| * Interrupt routing description for BCOM's Winnet100 board. |
| * It was not possible to read back the pirq-Table. In the 0xF segment was |
| * no string like $PIRQ... |
| * But the already running 2.4.21 kernel provides eth0 IRQ15 and USB IRQ 11. |
| * The Realtek was device 0.f.0, the USB 0.13.0. |
| * |
| * This is the physical routing on this board: |
| * |
| * 5530 USB Network |
| * northbridge device device |
| * 00.13.0 00.0f.00 |
| * ------------------------------------ |
| * INTA# INTA# n.c. |
| * INTB# n.c. n.c. |
| * INTC# n.c. INTA# |
| * INTD# n.c. n.c. |
| */ |
| |
| #include <arch/pirq_routing.h> |
| |
| #define INT_A 0x01 |
| #define INT_B 0x02 |
| #define INT_C 0x03 |
| #define INT_D 0x04 |
| |
| /* |
| * The USB controller should be connected to IRQ11, |
| * the network controller should be connected to IRQ15. |
| */ |
| #define IRQ_BITMAP_LINK0 0x0800 |
| #define IRQ_BITMAP_LINK1 0x0400 |
| #define IRQ_BITMAP_LINK2 0x8000 |
| #define IRQ_BITMAP_LINK3 0x0200 |
| |
| /** Reserved interrupt channels for exclusive PCI usage. */ |
| #define IRQ_DEVOTED_TO_PCI (IRQ_BITMAP_LINK0 | IRQ_BITMAP_LINK2) |
| |
| /** |
| * Routing description. |
| * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx |
| */ |
| static const struct irq_routing_table intel_irq_routing_table = { |
| .signature = PIRQ_SIGNATURE, /* PIRQ signature */ |
| .version = PIRQ_VERSION, /* PIRQ version */ |
| .size = 32 +16 * CONFIG_IRQ_SLOT_COUNT,/* Max. CONFIG_IRQ_SLOT_COUNT devices */ |
| .rtr_bus = 0x00, /* Interrupt router bus */ |
| .rtr_devfn = (0x12 << 3) | 0x0, /* Interrupt router device */ |
| .exclusive_irqs = IRQ_DEVOTED_TO_PCI, /* IRQs devoted to PCI */ |
| .rtr_vendor = 0x1078, /* Vendor */ |
| .rtr_device = 0x0100, /* Device */ |
| .miniport_data = 0, /* Miniport data */ |
| .checksum = 0xbf + 16, /* Checksum */ |
| .slots = { |
| /* |
| * Definition for "slot#1". There is no real slot, |
| * the USB device is embedded... |
| */ |
| [0] = { |
| .bus = 0x00, |
| .devfn = (0x13 << 3) | 0x0, |
| .irq = { |
| /* Link Bitmap */ |
| [0] = { INT_A, IRQ_BITMAP_LINK0 }, |
| [1] = { INT_B, IRQ_BITMAP_LINK1 }, |
| [2] = { INT_C, IRQ_BITMAP_LINK2 }, |
| [3] = { INT_D, IRQ_BITMAP_LINK3 }, |
| }, |
| .slot = 0x0, |
| }, |
| |
| /* |
| * Definition for "slot#3". There is no real slot, |
| * the network device is soldered... |
| */ |
| [1] = { |
| .bus = 0x00, |
| .devfn = (0x0f << 3) | 0x0, |
| .irq = { |
| /* Link Bitmap */ |
| [0] = { INT_C, IRQ_BITMAP_LINK2 }, |
| [1] = { INT_D, IRQ_BITMAP_LINK3 }, |
| [2] = { INT_A, IRQ_BITMAP_LINK0 }, |
| [3] = { INT_B, IRQ_BITMAP_LINK1 }, |
| }, |
| .slot = 0x0, |
| } |
| } |
| }; |
| |
| /** |
| * Copy the IRQ routing table to memory. |
| * |
| * @param[in] addr Destination address (between 0xF0000...0x100000). |
| * @return TODO. |
| */ |
| unsigned long write_pirq_routing_table(unsigned long addr) |
| { |
| return copy_pirq_routing_table(addr, &intel_irq_routing_table); |
| } |