| # Load all chipsets |
| source "src/soc/intel/*/Kconfig" |
| |
| # Load common config |
| source "src/soc/intel/common/Kconfig.common" |
| |
| config INTEL_HAS_TOP_SWAP |
| bool |
| help |
| Set this config if the Intel SoC supports top swap feature |
| |
| config INTEL_ADD_TOP_SWAP_BOOTBLOCK |
| bool "Include a Top swap bootblock" |
| default n |
| depends on INTEL_HAS_TOP_SWAP |
| help |
| Intel PCH/Southbridges have feature that it is possible to have |
| the southbridge/PCH look for the bootblock at a 64K or |
| 128K/256K/512K/1MB (in case of newer SoCs) offset |
| instead of the usual top of flash. |
| Select this to put a 'second' bootblock. |
| |
| config INTEL_TOP_SWAP_BOOTBLOCK_SIZE |
| hex "Size of top swap boot block" |
| depends on INTEL_ADD_TOP_SWAP_BOOTBLOCK |
| default 0x10000 |
| help |
| Set this config to a supported topswap size. |
| Valid sizes: 0x10000 0x20000 0x40000 0x80000 0x100000 |
| |
| config INTEL_TOP_SWAP_FIT_ENTRY_FMAP_REG |
| string |
| depends on INTEL_ADD_TOP_SWAP_BOOTBLOCK |
| help |
| Use this config to specify the name of a FMAP region (which should |
| hold a microcode) whose address as the first entry in the topswap FIT. |
| This is useful in creating a asymmetric FIT in top swap bootblock |
| than the one in non-topswap bootblock. This string will be passed |
| onto ifittool (-A -n option). ifittool will not parse the region for MCU |
| entries, and only locate the region and insert its address into FIT. |