| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #ifndef SOUTHBRIDGE_INTEL_LYNXPOINT_PCH_H |
| #define SOUTHBRIDGE_INTEL_LYNXPOINT_PCH_H |
| |
| #include <acpi/acpi.h> |
| #include <southbridge/intel/common/rcba.h> /* IWYU pragma: export */ |
| |
| #define CROS_GPIO_DEVICE_NAME "LynxPoint" |
| |
| /* |
| * Lynx Point PCH PCI Devices: |
| * |
| * Bus 0:Device 31:Function 0 LPC Controller1 |
| * Bus 0:Device 31:Function 2 SATA Controller #1 |
| * Bus 0:Device 31:Function 3 SMBus Controller |
| * Bus 0:Device 31:Function 5 SATA Controller #22 |
| * Bus 0:Device 31:Function 6 Thermal Subsystem |
| * Bus 0:Device 29:Function 03 USB EHCI Controller #1 |
| * Bus 0:Device 26:Function 03 USB EHCI Controller #2 |
| * Bus 0:Device 28:Function 0 PCI Express* Port 1 |
| * Bus 0:Device 28:Function 1 PCI Express Port 2 |
| * Bus 0:Device 28:Function 2 PCI Express Port 3 |
| * Bus 0:Device 28:Function 3 PCI Express Port 4 |
| * Bus 0:Device 28:Function 4 PCI Express Port 5 |
| * Bus 0:Device 28:Function 5 PCI Express Port 6 |
| * Bus 0:Device 28:Function 6 PCI Express Port 7 |
| * Bus 0:Device 28:Function 7 PCI Express Port 8 |
| * Bus 0:Device 27:Function 0 Intel High Definition Audio Controller |
| * Bus 0:Device 25:Function 0 Gigabit Ethernet Controller |
| * Bus 0:Device 22:Function 0 Intel Management Engine Interface #1 |
| * Bus 0:Device 22:Function 1 Intel Management Engine Interface #2 |
| * Bus 0:Device 22:Function 2 IDE-R |
| * Bus 0:Device 22:Function 3 KT |
| * Bus 0:Device 20:Function 0 xHCI Controller |
| */ |
| |
| /* PCH stepping values for LPC device */ |
| #define LPT_H_STEP_B0 0x02 |
| #define LPT_H_STEP_C0 0x03 |
| #define LPT_H_STEP_C1 0x04 |
| #define LPT_H_STEP_C2 0x05 |
| #define LPT_LP_STEP_B0 0x02 |
| #define LPT_LP_STEP_B1 0x03 |
| #define LPT_LP_STEP_B2 0x04 |
| |
| #define SMBUS_SLAVE_ADDR 0x24 |
| |
| #if CONFIG(INTEL_LYNXPOINT_LP) |
| #define DEFAULT_PMBASE 0x1000 |
| #define DEFAULT_GPIOBASE 0x1400 |
| #define DEFAULT_GPIOSIZE 0x400 |
| #else |
| #define DEFAULT_PMBASE 0x500 |
| #define DEFAULT_GPIOBASE 0x480 |
| #define DEFAULT_GPIOSIZE 0x80 |
| #endif |
| |
| #ifndef __ACPI__ |
| |
| #if CONFIG(INTEL_LYNXPOINT_LP) |
| #define MAX_USB2_PORTS 10 |
| #define MAX_USB3_PORTS 4 |
| #else |
| #define MAX_USB2_PORTS 14 |
| #define MAX_USB3_PORTS 6 |
| #endif |
| |
| /* There are 8 OC pins */ |
| #define USB_OC_PIN_SKIP 8 |
| |
| enum usb2_port_location { |
| USB_PORT_SKIP = 0, |
| USB_PORT_BACK_PANEL, |
| USB_PORT_FRONT_PANEL, |
| USB_PORT_DOCK, |
| USB_PORT_MINI_PCIE, |
| USB_PORT_FLEX, |
| USB_PORT_INTERNAL, |
| }; |
| |
| /* |
| * USB port length is in MRC format: binary-coded decimal length in tenths of an inch. |
| * 4.2 inches -> 0x0042 |
| * 12.7 inches -> 0x0127 |
| */ |
| struct usb2_port_config { |
| uint16_t length; |
| bool enable; |
| unsigned short oc_pin; |
| enum usb2_port_location location; |
| }; |
| |
| struct usb3_port_config { |
| bool enable; |
| unsigned int oc_pin; |
| }; |
| |
| /* Mainboard-specific USB configuration */ |
| extern const struct usb2_port_config mainboard_usb2_ports[MAX_USB2_PORTS]; |
| extern const struct usb3_port_config mainboard_usb3_ports[MAX_USB3_PORTS]; |
| |
| static inline int pch_is_lp(void) |
| { |
| return CONFIG(INTEL_LYNXPOINT_LP); |
| } |
| |
| /* PCH platform types, safe for MRC consumption */ |
| enum pch_platform_type { |
| PCH_TYPE_MOBILE = 0, |
| PCH_TYPE_DESKTOP = 1, /* or server */ |
| PCH_TYPE_ULT = 5, |
| }; |
| |
| void usb_ehci_sleep_prepare(pci_devfn_t dev, u8 slp_typ); |
| void usb_ehci_disable(pci_devfn_t dev); |
| void usb_xhci_sleep_prepare(pci_devfn_t dev, u8 slp_typ); |
| void usb_xhci_route_all(void); |
| |
| enum pch_platform_type get_pch_platform_type(void); |
| int pch_silicon_revision(void); |
| int pch_silicon_id(void); |
| u16 get_pmbase(void); |
| u16 get_gpiobase(void); |
| |
| /* Power Management register handling in pmutil.c */ |
| /* PM1_CNT */ |
| void enable_pm1_control(u32 mask); |
| void disable_pm1_control(u32 mask); |
| /* PM1 */ |
| u16 clear_pm1_status(void); |
| void enable_pm1(u16 events); |
| u32 clear_smi_status(void); |
| /* SMI */ |
| void enable_smi(u32 mask); |
| void disable_smi(u32 mask); |
| /* ALT_GP_SMI */ |
| u32 clear_alt_smi_status(void); |
| void enable_alt_smi(u32 mask); |
| /* TCO */ |
| u32 clear_tco_status(void); |
| void enable_tco_sci(void); |
| /* GPE0 */ |
| u32 clear_gpe_status(void); |
| void clear_gpe_enable(void); |
| void enable_all_gpe(u32 set1, u32 set2, u32 set3, u32 set4); |
| void disable_all_gpe(void); |
| void enable_gpe(u32 mask); |
| void disable_gpe(u32 mask); |
| |
| void pch_enable(struct device *dev); |
| void pch_disable_devfn(struct device *dev); |
| void pch_log_state(void); |
| void acpi_create_serialio_ssdt(acpi_header_t *ssdt); |
| |
| void enable_usb_bar(void); |
| void early_pch_init(void); |
| void pch_enable_lpc(void); |
| void uart_bootblock_init(void); |
| void mainboard_config_superio(void); |
| void mainboard_config_rcba(void); |
| |
| #define MAINBOARD_POWER_OFF 0 |
| #define MAINBOARD_POWER_ON 1 |
| #define MAINBOARD_POWER_KEEP 2 |
| |
| /* PCI Configuration Space (D30:F0): PCI2PCI */ |
| #define PSTS 0x06 |
| #define SMLT 0x1b |
| #define SECSTS 0x1e |
| #define INTR 0x3c |
| |
| /* Power Management Control and Status */ |
| #define PCH_PCS 0x84 |
| #define PCH_PCS_PS_D3HOT 3 |
| |
| /* SerialIO */ |
| #define PCH_DEVFN_SDMA PCI_DEVFN(0x15, 0) |
| #define PCH_DEVFN_I2C0 PCI_DEVFN(0x15, 1) |
| #define PCH_DEVFN_I2C1 PCI_DEVFN(0x15, 2) |
| #define PCH_DEVFN_SPI0 PCI_DEVFN(0x15, 3) |
| #define PCH_DEVFN_SPI1 PCI_DEVFN(0x15, 4) |
| #define PCH_DEVFN_UART0 PCI_DEVFN(0x15, 5) |
| #define PCH_DEVFN_UART1 PCI_DEVFN(0x15, 6) |
| |
| #define PCH_DEVFN_SDIO PCI_DEVFN(0x17, 0) |
| |
| #define PCH_EHCI1_DEV PCI_DEV(0, 0x1d, 0) |
| #define PCH_EHCI2_DEV PCI_DEV(0, 0x1a, 0) |
| #define PCH_XHCI_DEV PCI_DEV(0, 0x14, 0) |
| #define PCH_ME_DEV PCI_DEV(0, 0x16, 0) |
| #define PCH_PCIE_DEV_SLOT 28 |
| |
| /* PCI Configuration Space (D31:F0): LPC */ |
| #define PCH_LPC_DEV PCI_DEV(0, 0x1f, 0) |
| #define SERIRQ_CNTL 0x64 |
| |
| #define GEN_PMCON_1 0xa0 |
| #define SMI_LOCK (1 << 4) |
| #define GEN_PMCON_2 0xa2 |
| #define SYSTEM_RESET_STS (1 << 4) |
| #define THERMTRIP_STS (1 << 3) |
| #define SYSPWR_FLR (1 << 1) |
| #define PWROK_FLR (1 << 0) |
| #define GEN_PMCON_3 0xa4 |
| #define SUS_PWR_FLR (1 << 14) |
| #define GEN_RST_STS (1 << 9) |
| #define RTC_BATTERY_DEAD (1 << 2) |
| #define PWR_FLR (1 << 1) |
| #define SLEEP_AFTER_POWER_FAIL (1 << 0) |
| #define PMIR 0xac |
| #define PMIR_CF9LOCK (1 << 31) |
| #define PMIR_CF9GR (1 << 20) |
| |
| /* GEN_PMCON_3 bits */ |
| #define RTC_BATTERY_DEAD (1 << 2) |
| #define RTC_POWER_FAILED (1 << 1) |
| #define SLEEP_AFTER_POWER_FAIL (1 << 0) |
| |
| #define PMBASE 0x40 |
| #define ACPI_CNTL 0x44 |
| #define ACPI_EN (1 << 7) |
| #define BIOS_CNTL 0xDC |
| #define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */ |
| #define GPIO_CNTL 0x4C /* LPC GPIO Control Register */ |
| #define GPIO_ROUT 0xb8 |
| |
| #define PIRQA_ROUT 0x60 |
| #define PIRQB_ROUT 0x61 |
| #define PIRQC_ROUT 0x62 |
| #define PIRQD_ROUT 0x63 |
| #define PIRQE_ROUT 0x68 |
| #define PIRQF_ROUT 0x69 |
| #define PIRQG_ROUT 0x6A |
| #define PIRQH_ROUT 0x6B |
| |
| #define LPC_IO_DEC 0x80 /* IO Decode Ranges Register */ |
| #define LPC_EN 0x82 /* LPC IF Enables Register */ |
| #define CNF2_LPC_EN (1 << 13) /* 0x4e/0x4f */ |
| #define CNF1_LPC_EN (1 << 12) /* 0x2e/0x2f */ |
| #define MC_LPC_EN (1 << 11) /* 0x62/0x66 */ |
| #define KBC_LPC_EN (1 << 10) /* 0x60/0x64 */ |
| #define GAMEH_LPC_EN (1 << 9) /* 0x208/0x20f */ |
| #define GAMEL_LPC_EN (1 << 8) /* 0x200/0x207 */ |
| #define FDD_LPC_EN (1 << 3) /* LPC_IO_DEC[12] */ |
| #define LPT_LPC_EN (1 << 2) /* LPC_IO_DEC[9:8] */ |
| #define COMB_LPC_EN (1 << 1) /* LPC_IO_DEC[6:4] */ |
| #define COMA_LPC_EN (1 << 0) /* LPC_IO_DEC[2:0] */ |
| #define LPC_IBDF 0x6C /* I/O APIC bus/dev/fn */ |
| #define LPC_HnBDF(n) (0x70 + (n) * 2) /* HPET n bus/dev/fn */ |
| #define LPC_GEN1_DEC 0x84 /* LPC IF Generic Decode Range 1 */ |
| #define LPC_GEN2_DEC 0x88 /* LPC IF Generic Decode Range 2 */ |
| #define LPC_GEN3_DEC 0x8c /* LPC IF Generic Decode Range 3 */ |
| #define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */ |
| #define LGMR 0x98 /* LPC Generic Memory Range */ |
| |
| /* PCI Configuration Space (D31:F2): SATA */ |
| #define PCH_SATA_DEV PCI_DEV(0, 0x1f, 2) |
| #define PCH_SATA2_DEV PCI_DEV(0, 0x1f, 5) |
| |
| #define IDE_TIM_PRI 0x40 /* IDE timings, primary */ |
| #define IDE_DECODE_ENABLE (1 << 15) |
| #define IDE_TIM_SEC 0x42 /* IDE timings, secondary */ |
| |
| #define SATA_SIRI 0xa0 /* SATA Indexed Register Index */ |
| #define SATA_SIRD 0xa4 /* SATA Indexed Register Data */ |
| #define SATA_SP 0xd0 /* Scratchpad */ |
| |
| /* SATA IOBP Registers */ |
| #define SATA_IOBP_SP0G3IR 0xea000151 |
| #define SATA_IOBP_SP1G3IR 0xea000051 |
| #define SATA_IOBP_SP0DTLE_DATA 0xea002750 |
| #define SATA_IOBP_SP0DTLE_EDGE 0xea002754 |
| #define SATA_IOBP_SP1DTLE_DATA 0xea002550 |
| #define SATA_IOBP_SP1DTLE_EDGE 0xea002554 |
| |
| #define SATA_DTLE_MASK 0xF |
| #define SATA_DTLE_DATA_SHIFT 24 |
| #define SATA_DTLE_EDGE_SHIFT 16 |
| |
| /* EHCI PCI Registers */ |
| #define EHCI_PWR_CTL_STS 0x54 |
| #define PWR_CTL_SET_MASK 0x3 |
| #define PWR_CTL_SET_D0 0x0 |
| #define PWR_CTL_SET_D3 0x3 |
| #define PWR_CTL_ENABLE_PME (1 << 8) |
| #define PWR_CTL_STATUS_PME (1 << 15) |
| |
| /* EHCI Memory Registers */ |
| #define EHCI_USB_CMD 0x20 |
| #define EHCI_USB_CMD_RUN (1 << 0) |
| #define EHCI_USB_CMD_PSE (1 << 4) |
| #define EHCI_USB_CMD_ASE (1 << 5) |
| #define EHCI_PORTSC(port) (0x64 + (port) * 4) |
| #define EHCI_PORTSC_ENABLED (1 << 2) |
| #define EHCI_PORTSC_SUSPEND (1 << 7) |
| |
| /* XHCI PCI Registers */ |
| #define XHCI_PWR_CTL_STS 0x74 |
| #define XHCI_USB2PR 0xd0 |
| #define XHCI_USB2PRM 0xd4 |
| #define XHCI_USB2PR_HCSEL 0x7fff |
| #define XHCI_USB3PR 0xd8 |
| #define XHCI_USB3PR_SSEN 0x3f |
| #define XHCI_USB3PRM 0xdc |
| #define XHCI_USB3FUS 0xe0 |
| #define XHCI_USB3FUS_SS_MASK 3 |
| #define XHCI_USB3FUS_SS_SHIFT 3 |
| #define XHCI_USB3PDO 0xe8 |
| |
| /* XHCI Memory Registers */ |
| #define XHCI_USB3_PORTSC(port) ((pch_is_lp() ? 0x510 : 0x570) + ((port) * 0x10)) |
| #define XHCI_USB3_PORTSC_CHST (0x7f << 17) |
| #define XHCI_USB3_PORTSC_WCE (1 << 25) /* Wake on Connect */ |
| #define XHCI_USB3_PORTSC_WDE (1 << 26) /* Wake on Disconnect */ |
| #define XHCI_USB3_PORTSC_WOE (1 << 27) /* Wake on Overcurrent */ |
| #define XHCI_USB3_PORTSC_WRC (1 << 19) /* Warm Reset Complete */ |
| #define XHCI_USB3_PORTSC_LWS (1 << 16) /* Link Write Strobe */ |
| #define XHCI_USB3_PORTSC_PED (1 << 1) /* Port Enabled/Disabled */ |
| #define XHCI_USB3_PORTSC_WPR (1 << 31) /* Warm Port Reset */ |
| #define XHCI_USB3_PORTSC_PLS (0xf << 5) /* Port Link State */ |
| #define XHCI_PLSR_DISABLED (4 << 5) /* Port is disabled */ |
| #define XHCI_PLSR_RXDETECT (5 << 5) /* Port is disconnected */ |
| #define XHCI_PLSR_POLLING (7 << 5) /* Port is polling */ |
| #define XHCI_PLSW_ENABLE (5 << 5) /* Transition from disabled */ |
| |
| /* Serial IO IOBP Registers */ |
| #define SIO_IOBP_PORTCTRL0 0xcb000000 /* SDIO D23:F0 */ |
| #define SIO_IOBP_PORTCTRL0_ACPI_IRQ_EN (1 << 5) |
| #define SIO_IOBP_PORTCTRL0_PCI_CONF_DIS (1 << 4) |
| #define SIO_IOBP_PORTCTRL1 0xcb000014 /* SDIO D23:F0 */ |
| #define SIO_IOBP_PORTCTRL1_SNOOP_SELECT(x) (((x) & 3) << 13) |
| #define SIO_IOBP_GPIODF 0xcb000154 |
| #define SIO_IOBP_GPIODF_SDIO_IDLE_DET_EN (1 << 4) |
| #define SIO_IOBP_GPIODF_DMA_IDLE_DET_EN (1 << 3) |
| #define SIO_IOBP_GPIODF_UART_IDLE_DET_EN (1 << 2) |
| #define SIO_IOBP_GPIODF_I2C_IDLE_DET_EN (1 << 1) |
| #define SIO_IOBP_GPIODF_SPI_IDLE_DET_EN (1 << 0) |
| #define SIO_IOBP_PORTCTRL2 0xcb000240 /* DMA D21:F0 */ |
| #define SIO_IOBP_PORTCTRL3 0xcb000248 /* I2C0 D21:F1 */ |
| #define SIO_IOBP_PORTCTRL4 0xcb000250 /* I2C1 D21:F2 */ |
| #define SIO_IOBP_PORTCTRL5 0xcb000258 /* SPI0 D21:F3 */ |
| #define SIO_IOBP_PORTCTRL6 0xcb000260 /* SPI1 D21:F4 */ |
| #define SIO_IOBP_PORTCTRL7 0xcb000268 /* UART0 D21:F5 */ |
| #define SIO_IOBP_PORTCTRL8 0xcb000270 /* UART1 D21:F6 */ |
| #define SIO_IOBP_PORTCTRLX(x) (0xcb000240 + ((x) * 8)) |
| /* PORTCTRL 2-8 have the same layout */ |
| #define SIO_IOBP_PORTCTRL_ACPI_IRQ_EN (1 << 21) |
| #define SIO_IOBP_PORTCTRL_PCI_CONF_DIS (1 << 20) |
| #define SIO_IOBP_PORTCTRL_SNOOP_SELECT(x) (((x) & 3) << 18) |
| #define SIO_IOBP_PORTCTRL_INT_PIN(x) (((x) & 0xf) << 2) |
| #define SIO_IOBP_PORTCTRL_PM_CAP_PRSNT (1 << 1) |
| #define SIO_IOBP_FUNCDIS0 0xce00aa07 /* DMA D21:F0 */ |
| #define SIO_IOBP_FUNCDIS1 0xce00aa47 /* I2C0 D21:F1 */ |
| #define SIO_IOBP_FUNCDIS2 0xce00aa87 /* I2C1 D21:F2 */ |
| #define SIO_IOBP_FUNCDIS3 0xce00aac7 /* SPI0 D21:F3 */ |
| #define SIO_IOBP_FUNCDIS4 0xce00ab07 /* SPI1 D21:F4 */ |
| #define SIO_IOBP_FUNCDIS5 0xce00ab47 /* UART0 D21:F5 */ |
| #define SIO_IOBP_FUNCDIS6 0xce00ab87 /* UART1 D21:F6 */ |
| #define SIO_IOBP_FUNCDIS7 0xce00ae07 /* SDIO D23:F0 */ |
| #define SIO_IOBP_FUNCDIS_DIS (1 << 8) |
| |
| /* Serial IO Devices */ |
| #define SIO_ID_SDMA 0 /* D21:F0 */ |
| #define SIO_ID_I2C0 1 /* D21:F1 */ |
| #define SIO_ID_I2C1 2 /* D21:F2 */ |
| #define SIO_ID_SPI0 3 /* D21:F3 */ |
| #define SIO_ID_SPI1 4 /* D21:F4 */ |
| #define SIO_ID_UART0 5 /* D21:F5 */ |
| #define SIO_ID_UART1 6 /* D21:F6 */ |
| #define SIO_ID_SDIO 7 /* D23:F0 */ |
| |
| #define SIO_REG_PPR_CLOCK 0x800 |
| #define SIO_REG_PPR_CLOCK_EN (1 << 0) |
| #define SIO_REG_PPR_CLOCK_UPDATE (1 << 31) |
| #define SIO_REG_PPR_CLOCK_M_DIV 0x25a |
| #define SIO_REG_PPR_CLOCK_N_DIV 0x7fff |
| #define SIO_REG_PPR_RST 0x804 |
| #define SIO_REG_PPR_RST_ASSERT 0x3 |
| #define SIO_REG_PPR_GEN 0x808 |
| #define SIO_REG_PPR_GEN_LTR_MODE_MASK (1 << 2) |
| #define SIO_REG_PPR_GEN_VOLTAGE_MASK (1 << 3) |
| #define SIO_REG_PPR_GEN_VOLTAGE(x) (((x) & 1) << 3) |
| #define SIO_REG_AUTO_LTR 0x814 |
| |
| #define SIO_REG_SDIO_PPR_GEN 0x1008 |
| #define SIO_REG_SDIO_PPR_SW_LTR 0x1010 |
| #define SIO_REG_SDIO_PPR_CMD12 0x3c |
| #define SIO_REG_SDIO_PPR_CMD12_B30 (1 << 30) |
| |
| #define SIO_PIN_INTA 1 /* IRQ5 in ACPI mode */ |
| #define SIO_PIN_INTB 2 /* IRQ6 in ACPI mode */ |
| #define SIO_PIN_INTC 3 /* IRQ7 in ACPI mode */ |
| #define SIO_PIN_INTD 4 /* IRQ13 in ACPI mode */ |
| |
| /* PCI Configuration Space (D31:F3): SMBus */ |
| #define PCH_SMBUS_DEV PCI_DEV(0, 0x1f, 3) |
| #define SMB_BASE 0x20 |
| #define HOSTC 0x40 |
| |
| /* HOSTC bits */ |
| #define I2C_EN (1 << 2) |
| #define SMB_SMI_EN (1 << 1) |
| #define HST_EN (1 << 0) |
| |
| /* Southbridge IO BARs */ |
| |
| #define GPIOBASE 0x48 |
| |
| #define PMBASE 0x40 |
| |
| #define RPC 0x0400 /* 32bit */ |
| #define RPFN 0x0404 /* 32bit */ |
| |
| /* Root Port configuratinon space hide */ |
| #define RPFN_HIDE(port) (1 << (((port) * 4) + 3)) |
| /* Get the function number assigned to a Root Port */ |
| #define RPFN_FNGET(reg,port) (((reg) >> ((port) * 4)) & 7) |
| /* Set the function number for a Root Port */ |
| #define RPFN_FNSET(port,func) (((func) & 7) << ((port) * 4)) |
| /* Root Port function number mask */ |
| #define RPFN_FNMASK(port) (7 << ((port) * 4)) |
| |
| #define TRSR 0x1e00 /* 8bit */ |
| #define TRCR 0x1e10 /* 64bit */ |
| #define TWDR 0x1e18 /* 64bit */ |
| |
| #define IOTR0 0x1e80 /* 64bit */ |
| #define IOTR1 0x1e88 /* 64bit */ |
| #define IOTR2 0x1e90 /* 64bit */ |
| #define IOTR3 0x1e98 /* 64bit */ |
| |
| #define TCTL 0x3000 /* 8bit */ |
| |
| #define NOINT 0 |
| #define INTA 1 |
| #define INTB 2 |
| #define INTC 3 |
| #define INTD 4 |
| |
| #define DIR_IDR 12 /* Interrupt D Pin Offset */ |
| #define DIR_ICR 8 /* Interrupt C Pin Offset */ |
| #define DIR_IBR 4 /* Interrupt B Pin Offset */ |
| #define DIR_IAR 0 /* Interrupt A Pin Offset */ |
| |
| #define PIRQA 0 |
| #define PIRQB 1 |
| #define PIRQC 2 |
| #define PIRQD 3 |
| #define PIRQE 4 |
| #define PIRQF 5 |
| #define PIRQG 6 |
| #define PIRQH 7 |
| |
| /* IO Buffer Programming */ |
| #define IOBPIRI 0x2330 |
| #define IOBPD 0x2334 |
| #define IOBPS 0x2338 |
| #define IOBPS_READY 0x0001 |
| #define IOBPS_TX_MASK 0x0006 |
| #define IOBPS_MASK 0xff00 |
| #define IOBPS_READ 0x0600 |
| #define IOBPS_WRITE 0x0700 |
| #define IOBPU 0x233a |
| #define IOBPU_MAGIC 0xf000 |
| #define IOBP_PCICFG_READ 0x0400 |
| #define IOBP_PCICFG_WRITE 0x0500 |
| |
| #define D31IP 0x3100 /* 32bit */ |
| #define D31IP_TTIP 24 /* Thermal Throttle Pin */ |
| #define D31IP_SIP2 20 /* SATA Pin 2 */ |
| #define D31IP_SMIP 12 /* SMBUS Pin */ |
| #define D31IP_SIP 8 /* SATA Pin */ |
| #define D30IP 0x3104 /* 32bit */ |
| #define D30IP_PIP 0 /* PCI Bridge Pin */ |
| #define D29IP 0x3108 /* 32bit */ |
| #define D29IP_E1P 0 /* EHCI #1 Pin */ |
| #define D28IP 0x310c /* 32bit */ |
| #define D28IP_P8IP 28 /* PCI Express Port 8 */ |
| #define D28IP_P7IP 24 /* PCI Express Port 7 */ |
| #define D28IP_P6IP 20 /* PCI Express Port 6 */ |
| #define D28IP_P5IP 16 /* PCI Express Port 5 */ |
| #define D28IP_P4IP 12 /* PCI Express Port 4 */ |
| #define D28IP_P3IP 8 /* PCI Express Port 3 */ |
| #define D28IP_P2IP 4 /* PCI Express Port 2 */ |
| #define D28IP_P1IP 0 /* PCI Express Port 1 */ |
| #define D27IP 0x3110 /* 32bit */ |
| #define D27IP_ZIP 0 /* HD Audio Pin */ |
| #define D26IP 0x3114 /* 32bit */ |
| #define D26IP_E2P 0 /* EHCI #2 Pin */ |
| #define D25IP 0x3118 /* 32bit */ |
| #define D25IP_LIP 0 /* GbE LAN Pin */ |
| #define D22IP 0x3124 /* 32bit */ |
| #define D22IP_KTIP 12 /* KT Pin */ |
| #define D22IP_IDERIP 8 /* IDE-R Pin */ |
| #define D22IP_MEI2IP 4 /* MEI #2 Pin */ |
| #define D22IP_MEI1IP 0 /* MEI #1 Pin */ |
| #define D20IP 0x3128 /* 32bit */ |
| #define D20IP_XHCI 0 /* XHCI Pin */ |
| #define D31IR 0x3140 /* 16bit */ |
| #define D30IR 0x3142 /* 16bit */ |
| #define D29IR 0x3144 /* 16bit */ |
| #define D28IR 0x3146 /* 16bit */ |
| #define D27IR 0x3148 /* 16bit */ |
| #define D26IR 0x314c /* 16bit */ |
| #define D25IR 0x3150 /* 16bit */ |
| #define D23IR 0x3158 /* 16bit */ |
| #define D22IR 0x315c /* 16bit */ |
| #define D20IR 0x3160 /* 16bit */ |
| #define D21IR 0x3164 /* 16bit */ |
| #define D19IR 0x3168 /* 16bit */ |
| #define ACPIIRQEN 0x31e0 /* 32bit */ |
| #define OIC 0x31fe /* 16bit */ |
| #define PMSYNC_CONFIG 0x33c4 /* 32bit */ |
| #define PMSYNC_CONFIG2 0x33cc /* 32bit */ |
| #define SOFT_RESET_CTRL 0x38f4 |
| #define SOFT_RESET_DATA 0x38f8 |
| |
| #define DIR_ROUTE(a,b,c,d) \ |
| (((d) << DIR_IDR) | ((c) << DIR_ICR) | \ |
| ((b) << DIR_IBR) | ((a) << DIR_IAR)) |
| |
| #define RC 0x3400 /* 32bit */ |
| #define HPTC 0x3404 /* 32bit */ |
| #define GCS 0x3410 /* 32bit */ |
| #define BUC 0x3414 /* 32bit */ |
| #define PCH_DISABLE_GBE (1 << 5) |
| #define FD 0x3418 /* 32bit */ |
| #define DISPBDF 0x3424 /* 16bit */ |
| #define FD2 0x3428 /* 32bit */ |
| #define CG 0x341c /* 32bit */ |
| |
| /* Function Disable 1 RCBA 0x3418 */ |
| #define PCH_DISABLE_ALWAYS (1 << 0) |
| #define PCH_DISABLE_ADSPD (1 << 1) |
| #define PCH_DISABLE_SATA1 (1 << 2) |
| #define PCH_DISABLE_SMBUS (1 << 3) |
| #define PCH_DISABLE_HD_AUDIO (1 << 4) |
| #define PCH_DISABLE_EHCI2 (1 << 13) |
| #define PCH_DISABLE_LPC (1 << 14) |
| #define PCH_DISABLE_EHCI1 (1 << 15) |
| #define PCH_DISABLE_PCIE(x) (1 << (16 + (x))) |
| #define PCH_DISABLE_THERMAL (1 << 24) |
| #define PCH_DISABLE_SATA2 (1 << 25) |
| #define PCH_DISABLE_XHCI (1 << 27) |
| |
| /* Function Disable 2 RCBA 0x3428 */ |
| #define PCH_DISABLE_KT (1 << 4) |
| #define PCH_DISABLE_IDER (1 << 3) |
| #define PCH_DISABLE_MEI2 (1 << 2) |
| #define PCH_DISABLE_MEI1 (1 << 1) |
| #define PCH_ENABLE_DBDF (1 << 0) |
| |
| #define PCH_IOAPIC_PCI_BUS 250 |
| #define PCH_IOAPIC_PCI_SLOT 31 |
| #define PCH_HPET_PCI_BUS 250 |
| #define PCH_HPET_PCI_SLOT 15 |
| |
| /* ICH7 PMBASE */ |
| #define PM1_STS 0x00 |
| #define WAK_STS (1 << 15) |
| #define PCIEXPWAK_STS (1 << 14) |
| #define PRBTNOR_STS (1 << 11) |
| #define RTC_STS (1 << 10) |
| #define PWRBTN_STS (1 << 8) |
| #define GBL_STS (1 << 5) |
| #define BM_STS (1 << 4) |
| #define TMROF_STS (1 << 0) |
| #define PM1_EN 0x02 |
| #define PCIEXPWAK_DIS (1 << 14) |
| #define RTC_EN (1 << 10) |
| #define PWRBTN_EN (1 << 8) |
| #define GBL_EN (1 << 5) |
| #define TMROF_EN (1 << 0) |
| #define PM1_CNT 0x04 |
| #define GBL_RLS (1 << 2) |
| #define BM_RLD (1 << 1) |
| #define SCI_EN (1 << 0) |
| #define PM1_TMR 0x08 |
| #define PROC_CNT 0x10 |
| #define LV2 0x14 |
| #define LV3 0x15 |
| #define LV4 0x16 |
| #define GPE0_STS 0x20 |
| #define PME_B0_STS (1 << 13) |
| #define PME_STS (1 << 11) |
| #define BATLOW_STS (1 << 10) |
| #define PCI_EXP_STS (1 << 9) |
| #define RI_STS (1 << 8) |
| #define SMB_WAK_STS (1 << 7) |
| #define TCOSCI_STS (1 << 6) |
| #define SWGPE_STS (1 << 2) |
| #define HOT_PLUG_STS (1 << 1) |
| #define GPE0_STS_2 0x24 |
| #define GPE0_EN 0x28 |
| #define PME_B0_EN (1 << 13) |
| #define PME_EN (1 << 11) |
| #define TCOSCI_EN (1 << 6) |
| #define GPE0_EN_2 0x2c |
| #define SMI_EN 0x30 |
| #define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic |
| #define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic |
| #define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS |
| #define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al) |
| #define MCSMI_EN (1 << 11) // Trap microcontroller range access |
| #define BIOS_RLS (1 << 7) // asserts SCI on bit set |
| #define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set |
| #define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI# |
| #define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI# |
| #define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic |
| #define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit |
| #define EOS (1 << 1) // End of SMI (deassert SMI#) |
| #define GBL_SMI_EN (1 << 0) // SMI# generation at all? |
| #define SMI_STS 0x34 |
| #define ALT_GP_SMI_EN 0x38 |
| #define ALT_GP_SMI_STS 0x3a |
| #define GPE_CNTL 0x42 |
| #define DEVACT_STS 0x44 |
| #define PM2_CNT 0x50 // mobile only |
| #define C3_RES 0x54 |
| |
| #if CONFIG(TCO_SPACE_NOT_YET_SPLIT) |
| #define TCO1_STS 0x64 |
| #define DMISCI_STS (1 << 9) |
| #define TCO2_STS 0x66 |
| #define TCO2_STS_SECOND_TO (1 << 1) |
| #endif |
| |
| #define ALT_GP_SMI_EN2 0x5c |
| #define ALT_GP_SMI_STS2 0x5e |
| |
| /* Lynxpoint LP */ |
| #define LP_GPE0_STS_1 0x80 /* GPIO 0-31 */ |
| #define LP_GPE0_STS_2 0x84 /* GPIO 32-63 */ |
| #define LP_GPE0_STS_3 0x88 /* GPIO 64-94 */ |
| #define LP_GPE0_STS_4 0x8c /* Standard GPE */ |
| #define LP_GPE0_EN_1 0x90 |
| #define LP_GPE0_EN_2 0x94 |
| #define LP_GPE0_EN_3 0x98 |
| #define LP_GPE0_EN_4 0x9c |
| |
| /* |
| * SPI Opcode Menu setup for SPIBAR lockdown |
| * should support most common flash chips. |
| */ |
| |
| #define SPIBAR_OFFSET 0x3800 |
| #define SPIBAR8(x) RCBA8((x) + SPIBAR_OFFSET) |
| #define SPIBAR16(x) RCBA16((x) + SPIBAR_OFFSET) |
| #define SPIBAR32(x) RCBA32((x) + SPIBAR_OFFSET) |
| |
| /* Registers within the SPIBAR */ |
| #define SSFC 0x91 |
| #define FDOC 0xb0 |
| #define FDOD 0xb4 |
| |
| #define SPIBAR_HSFS 0x3804 /* SPI hardware sequence status */ |
| #define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */ |
| #define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */ |
| #define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */ |
| #define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */ |
| #define SPIBAR_HSFC 0x3806 /* SPI hardware sequence control */ |
| #define SPIBAR_HSFC_BYTE_COUNT(c) ((((c) - 1) & 0x3f) << 8) |
| #define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */ |
| #define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */ |
| #define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */ |
| #define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */ |
| #define SPIBAR_FADDR 0x3808 /* SPI flash address */ |
| #define SPIBAR_FDATA(n) (0x3810 + (4 * (n))) /* SPI flash data */ |
| |
| #endif /* __ACPI__ */ |
| #endif /* SOUTHBRIDGE_INTEL_LYNXPOINT_PCH_H */ |