| /* |
| * This file is part of the coreboot project. |
| * |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <console/console.h> |
| #include <device/pci.h> |
| #include <device/pci_def.h> |
| #include <arch/ioapic.h> |
| #include "lpc.h" |
| #include <device/pci_ops.h> |
| |
| void lpc_read_resources(struct device *dev) |
| { |
| struct resource *res; |
| |
| printk(BIOS_DEBUG, "SB800 - Lpc.c - lpc_read_resources - Start.\n"); |
| /* Get the normal pci resources of this device */ |
| pci_dev_read_resources(dev); /* We got one for APIC, or one more for TRAP */ |
| |
| /* Add an extra subtractive resource for both memory and I/O. */ |
| res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); |
| res->base = 0; |
| res->size = 0x1000; |
| res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | |
| IORESOURCE_ASSIGNED | IORESOURCE_FIXED; |
| |
| res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); |
| res->base = 0xff800000; |
| res->size = 0x00800000; /* 8 MB for flash */ |
| res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | |
| IORESOURCE_ASSIGNED | IORESOURCE_FIXED; |
| |
| /* Add a memory resource for the SPI BAR. */ |
| fixed_mem_resource(dev, 2, SPI_BASE_ADDRESS / 1024, 1, IORESOURCE_SUBTRACTIVE); |
| |
| res = new_resource(dev, 3); |
| res->base = IO_APIC_ADDR; |
| res->size = 0x00001000; |
| res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; |
| |
| compact_resources(dev); |
| printk(BIOS_DEBUG, "SB800 - Lpc.c - lpc_read_resources - End.\n"); |
| } |
| |
| void lpc_set_resources(struct device *dev) |
| { |
| struct resource *res; |
| |
| printk(BIOS_DEBUG, "SB800 - Lpc.c - lpc_set_resources - Start.\n"); |
| |
| /* Special case. SPI Base Address. The SpiRomEnable should STAY set. */ |
| res = find_resource(dev, 2); |
| pci_write_config32(dev, SPIROM_BASE_ADDRESS_REGISTER, res->base | SPI_ROM_ENABLE); |
| |
| pci_dev_set_resources(dev); |
| |
| printk(BIOS_DEBUG, "SB800 - Lpc.c - lpc_set_resources - End.\n"); |
| } |
| |
| /** |
| * @brief Enable resources for children devices |
| * |
| * @param dev the device whose children's resources are to be enabled |
| * |
| */ |
| void lpc_enable_childrens_resources(struct device *dev) |
| { |
| struct bus *link; |
| u32 reg, reg_x; |
| int var_num = 0; |
| u16 reg_var[3]; |
| |
| printk(BIOS_DEBUG, "SB800 - Lpc.c - lpc_enable_childrens_resources - Start.\n"); |
| reg = pci_read_config32(dev, 0x44); |
| reg_x = pci_read_config32(dev, 0x48); |
| |
| for (link = dev->link_list; link; link = link->next) { |
| struct device *child; |
| for (child = link->children; child; |
| child = child->sibling) { |
| if (child->enabled |
| && (child->path.type == DEVICE_PATH_PNP)) { |
| struct resource *res; |
| for (res = child->resource_list; res; res = res->next) { |
| u32 base; /* don't need long long */ |
| if (!(res->flags & IORESOURCE_IO)) |
| continue; |
| base = res->base; |
| /* |
| printk(BIOS_DEBUG, "sb800 lpc decode:%s, |
| base=0x%08x, end=0x%08x\n", |
| dev_path(child), base, |
| resource_end(res)); |
| */ |
| switch (base) { |
| case 0x60: /* KB */ |
| case 0x64: /* MS */ |
| reg |= (1 << 29); |
| break; |
| case 0x3f8: /* COM1 */ |
| reg |= (1 << 6); |
| break; |
| case 0x2f8: /* COM2 */ |
| reg |= (1 << 7); |
| break; |
| case 0x378: /* Parallel 1 */ |
| reg |= (1 << 0); |
| break; |
| case 0x3f0: /* FD0 */ |
| reg |= (1 << 26); |
| break; |
| case 0x220: /* Audio 0 */ |
| reg |= (1 << 8); |
| break; |
| case 0x300: /* Midi 0 */ |
| reg |= (1 << 18); |
| break; |
| case 0x400: |
| reg_x |= (1 << 16); |
| break; |
| case 0x480: |
| reg_x |= (1 << 17); |
| break; |
| case 0x500: |
| reg_x |= (1 << 18); |
| break; |
| case 0x580: |
| reg_x |= (1 << 19); |
| break; |
| case 0x4700: |
| reg_x |= (1 << 22); |
| break; |
| case 0xfd60: |
| reg_x |= (1 << 23); |
| break; |
| default: |
| if (var_num >= 3) |
| continue; /* only 3 var ; compact them ? */ |
| switch (var_num) { |
| case 0: |
| reg_x |= (1 << 2); |
| break; |
| case 1: |
| reg_x |= (1 << 24); |
| break; |
| case 2: |
| reg_x |= (1 << 25); |
| break; |
| } |
| reg_var[var_num++] = |
| base & 0xffff; |
| } |
| } |
| } |
| } |
| } |
| pci_write_config32(dev, 0x44, reg); |
| pci_write_config32(dev, 0x48, reg_x); |
| /* Set WideIO for as many IOs found (fall through is on purpose) */ |
| switch (var_num) { |
| case 3: |
| pci_write_config16(dev, 0x90, reg_var[2]); |
| /* fall through */ |
| case 2: |
| pci_write_config16(dev, 0x66, reg_var[1]); |
| /* fall through */ |
| case 1: |
| //pci_write_config16(dev, 0x64, reg_var[0]); //cause filo can not find sata |
| break; |
| } |
| printk(BIOS_DEBUG, "SB800 - Lpc.c - lpc_enable_childrens_resources - End.\n"); |
| } |