| chip soc/intel/alderlake |
| # FSP configuration |
| |
| register "eist_enable" = "1" |
| |
| # Sagv Configuration |
| register "sagv" = "SaGv_Enabled" |
| register "RMT" = "0" |
| register "enable_c6dram" = "1" |
| |
| register "pmc_gpe0_dw0" = "GPP_J" |
| register "pmc_gpe0_dw1" = "GPP_VPGIO" |
| register "pmc_gpe0_dw2" = "GPD" |
| |
| # USB Configuration |
| register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC2)" # USB-C LAN_USB1 |
| register "usb2_ports[1]" = "USB2_PORT_MAX(OC1)" # MSI MYSTIC LIGHT |
| register "usb2_ports[2]" = "USB2_PORT_MAX(OC0)" # USB-A LAN_USB1 |
| register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC0)" # JUSB5 |
| register "usb2_ports[4]" = "USB2_PORT_MAX(OC3)" # HUB to rear USB 2.0 |
| register "usb2_ports[5]" = "USB2_PORT_LONG(OC3)" # empty? |
| register "usb2_ports[6]" = "USB2_PORT_LONG(OC7)" # JUSB4 |
| register "usb2_ports[7]" = "USB2_PORT_LONG(OC0)" # JUSB4 |
| register "usb2_ports[8]" = "USB2_PORT_LONG(OC2)" # JUSB3 |
| register "usb2_ports[9]" = "USB2_PORT_LONG(OC7)" # JUSB3 |
| register "usb2_ports[10]" = "USB2_PORT_MAX(OC0)" # PS2_USB1 |
| register "usb2_ports[11]" = "USB2_PORT_MAX(OC0)" # PS2_USB1 |
| register "usb2_ports[12]" = "USB2_PORT_MAX(OC0)" # HUB to USB 2.0 headers |
| register "usb2_ports[13]" = "USB2_PORT_MAX(OC6)" # CNVi BT |
| |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # USB-C LAN_USB1 |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # USB-A LAN_USB1 |
| register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" # JUSB5 |
| register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC0)" # USB-A USB2 |
| register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC7)" # USB-A USB2 |
| register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC7)" # JUSB4 |
| register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC2)" # JUSB4 |
| register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC2)" # JUSB3 |
| register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC0)" # JUSB3 |
| register "usb3_ports[9]" = "USB3_PORT_EMPTY" |
| |
| # LPC generic I/O ranges |
| register "gen1_dec" = "0x00fc0201" |
| register "gen2_dec" = "0x003c0a01" |
| register "gen3_dec" = "0x000c03f1" |
| register "gen4_dec" = "0x000c0081" |
| |
| register "sata_salp_support" = "1" |
| |
| register "sata_ports_enable" = "{ |
| [0] = 1, |
| [1] = 1, |
| [2] = 1, |
| [3] = 1, |
| [4] = 1, |
| [5] = 1, |
| [6] = 1, |
| [7] = 1, |
| }" |
| |
| register "sata_ports_dev_slp" = "{ |
| [0] = 0, |
| [1] = 0, |
| [2] = 0, |
| [3] = 0, |
| [4] = 0, |
| [5] = 0, |
| [6] = 1, |
| [7] = 1, |
| }" |
| |
| # HDMI on port B |
| register "ddi_portB_config" = "1" |
| register "ddi_ports_config" = "{ |
| [DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC, |
| [DDI_PORT_C] = DDI_ENABLE_HPD | DDI_ENABLE_DDC, |
| [DDI_PORT_1] = DDI_ENABLE_HPD | DDI_ENABLE_DDC, |
| [DDI_PORT_2] = DDI_ENABLE_HPD, |
| [DDI_PORT_3] = DDI_ENABLE_HPD | DDI_ENABLE_DDC, |
| [DDI_PORT_4] = DDI_ENABLE_HPD, |
| }" |
| |
| register "hybrid_storage_mode" = "1" |
| register "dmi_power_optimize_disable" = "1" |
| |
| # FIVR configuration |
| register "fivr_rfi_frequency" = "1394" |
| register "fivr_spread_spectrum" = "FIVR_SS_1_5" |
| register "ext_fivr_settings" = "{ |
| .configure_ext_fivr = 1, |
| }" |
| |
| device domain 0 on |
| subsystemid 0x1462 0x7d25 inherit |
| device ref pcie5_0 on |
| register "cpu_pcie_rp[CPU_RP(2)]" = "{ |
| .clk_src = 0, |
| .clk_req = 0, |
| .flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_HOTPLUG, |
| .PcieRpL1Substates = L1_SS_L1_2, |
| .pcie_rp_aspm = ASPM_L0S_L1, |
| }" |
| smbios_slot_desc "SlotTypePciExpressGen5x16" "SlotLengthLong" |
| "PCI_E1" "SlotDataBusWidth16X" |
| end |
| device ref pcie5_1 off end |
| device ref igpu on end |
| device ref pcie4_0 on |
| register "cpu_pcie_rp[CPU_RP(1)]" = "{ |
| .clk_src = 9, |
| .clk_req = 9, |
| .flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_CLK_REQ_DETECT, |
| .PcieRpL1Substates = L1_SS_L1_2, |
| .pcie_rp_aspm = ASPM_L0S_L1, |
| }" |
| smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" |
| "M2_1" "SlotDataBusWidth4X" |
| end |
| device ref crashlog off end |
| device ref xhci on end |
| device ref cnvi_wifi on |
| # Enable CNVi BT |
| register "cnvi_bt_core" = "true" |
| register "cnvi_bt_audio_offload" = "false" |
| chip drivers/wifi/generic |
| register "wake" = "GPE0_PME_B0" |
| register "enable_cnvi_ddr_rfim" = "true" |
| device generic 0 on end |
| end |
| end |
| device ref heci1 on end |
| device ref heci2 off end |
| device ref ide_r off end |
| device ref kt off end |
| device ref heci3 off end |
| device ref heci4 off end |
| device ref sata on end |
| device ref pcie_rp1 on |
| register "pch_pcie_rp[PCH_RP(1)]" = "{ |
| .clk_src = 10, |
| .clk_req = 10, |
| .flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_HOTPLUG | PCIE_RP_CLK_REQ_DETECT, |
| .PcieRpL1Substates = L1_SS_L1_2, |
| .pcie_rp_aspm = ASPM_L0S_L1, |
| }" |
| smbios_slot_desc "SlotTypePciExpressGen3X1" "SlotLengthShort" |
| "PCI_E2" "SlotDataBusWidth1X" |
| end |
| device ref pcie_rp2 on |
| register "pch_pcie_rp[PCH_RP(2)]" = "{ |
| .clk_src = 17, |
| .clk_req = 17, |
| .flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_HOTPLUG | PCIE_RP_CLK_REQ_DETECT, |
| .PcieRpL1Substates = L1_SS_L1_2, |
| .pcie_rp_aspm = ASPM_L0S_L1, |
| }" |
| smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthLong" |
| "PCI_E4" "SlotDataBusWidth1X" |
| end |
| device ref pcie_rp3 on |
| # i225 Ethernet, Clock PM unsupported, onboard device |
| register "pch_pcie_rp[PCH_RP(3)]" = "{ |
| .clk_src = 12, |
| .flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_CLK_REQ_UNUSED | PCIE_RP_BUILT_IN, |
| .PcieRpL1Substates = L1_SS_L1_2, |
| .pcie_rp_aspm = ASPM_L0S_L1, |
| }" |
| end |
| device ref pcie_rp4 off end |
| |
| device ref pcie_rp5 on |
| register "pch_pcie_rp[PCH_RP(5)]" = "{ |
| .clk_src = 15, |
| .clk_req = 15, |
| .flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_HOTPLUG | PCIE_RP_CLK_REQ_DETECT, |
| .PcieRpL1Substates = L1_SS_L1_2, |
| .pcie_rp_aspm = ASPM_L0S_L1, |
| }" |
| smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthLong" |
| "PCI_E3" "SlotDataBusWidth4X" |
| end |
| |
| device ref pcie_rp9 on |
| register "pch_pcie_rp[PCH_RP(9)]" = "{ |
| .clk_src = 13, |
| .clk_req = 13, |
| .flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_CLK_REQ_DETECT, |
| .PcieRpL1Substates = L1_SS_L1_2, |
| .pcie_rp_aspm = ASPM_L0S_L1, |
| }" |
| smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" |
| "M2_3" "SlotDataBusWidth4X" |
| end |
| |
| # These are not enabled. The Flex I/O mode is SATA to cover all 8 SATA ports. |
| # There is an ASMedia switch on-board to mux the SATA ports 7, 8 and PCIe |
| # 9-12, 21-24 to M2_3 and M2_4 slots |
| device ref pcie_rp13 off end |
| device ref pcie_rp14 off end |
| device ref pcie_rp15 off end |
| device ref pcie_rp16 off end |
| device ref pcie_rp17 off end |
| device ref pcie_rp18 off end |
| device ref pcie_rp19 off end |
| device ref pcie_rp20 off end |
| |
| device ref pcie_rp21 on |
| register "pch_pcie_rp[PCH_RP(21)]" = "{ |
| .clk_src = 14, |
| .clk_req = 14, |
| .flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_CLK_REQ_DETECT, |
| .PcieRpL1Substates = L1_SS_L1_2, |
| .pcie_rp_aspm = ASPM_L0S_L1, |
| }" |
| smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" |
| "M2_4" "SlotDataBusWidth4X" |
| end |
| |
| device ref pcie_rp25 on |
| register "pch_pcie_rp[PCH_RP(25)]" = "{ |
| .clk_src = 8, |
| .clk_req = 8, |
| .flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_CLK_REQ_DETECT, |
| .PcieRpL1Substates = L1_SS_L1_2, |
| .pcie_rp_aspm = ASPM_L0S_L1, |
| }" |
| smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" |
| "M2_2" "SlotDataBusWidth4X" |
| end |
| device ref pch_espi on |
| chip superio/nuvoton/nct6687d |
| device pnp 4e.1 off end # Parallel port |
| device pnp 4e.2 on # COM1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 4e.3 off end # COM2, IR |
| device pnp 4e.5 on # Keyboard |
| io 0x60 = 0x60 |
| io 0x62 = 0x64 |
| irq 0x70 = 1 |
| irq 0x72 = 12 |
| end |
| device pnp 4e.6 off end # CIR |
| device pnp 4e.7 off end # GPIO0-7 |
| device pnp 4e.8 off end # P80 UART |
| device pnp 4e.9 off end # GPIO8-9, GPIO1-8 AF |
| device pnp 4e.a on # ACPI |
| # Vendor firmware did not assign I/O and IRQ |
| end |
| device pnp 4e.b on # EC |
| io 0x60 = 0xa20 |
| # Vendor firmware did not assign IRQ |
| end |
| device pnp 4e.c off end # RTC |
| device pnp 4e.d off end # Deep Sleep |
| device pnp 4e.e off end # TACH/PWM assignment |
| device pnp 4e.f off end # Function register |
| end |
| end |
| device ref p2sb on end |
| device ref hda on |
| subsystemid 0x1462 0x9d25 |
| register "pch_hda_audio_link_hda_enable" = "1" |
| register "pch_hda_dsp_enable" = "0" |
| register "pch_hda_idisp_link_tmode" = "HDA_TMODE_8T" |
| register "pch_hda_idisp_link_frequency" = "HDA_LINKFREQ_96MHZ" |
| register "pch_hda_idisp_codec_enable" = "true" |
| end |
| device ref smbus on end |
| |
| chip drivers/crb |
| device mmio 0xfed40000 on end |
| end |
| end |
| end |