| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <arch/io.h> |
| #include <bootmode.h> |
| #include <device/mmio.h> |
| #include <cbmem.h> |
| #include <cpu/x86/smm.h> |
| #include <console/console.h> |
| #include <halt.h> |
| #include <intelblocks/pmclib.h> |
| #include <intelblocks/gpio.h> |
| #include <intelblocks/tco.h> |
| #include <option.h> |
| #include <security/vboot/vboot_common.h> |
| #include <soc/pm.h> |
| #include <stdint.h> |
| #include <string.h> |
| #include <timer.h> |
| |
| static struct chipset_power_state power_state; |
| |
| /* List of Minimum Assertion durations in microseconds */ |
| enum min_assert_dur { |
| MinAssertDur0s = 0, |
| MinAssertDur60us = 60, |
| MinAssertDur1ms = 1000, |
| MinAssertDur50ms = 50000, |
| MinAssertDur98ms = 98000, |
| MinAssertDur500ms = 500000, |
| MinAssertDur1s = 1000000, |
| MinAssertDur2s = 2000000, |
| MinAssertDur3s = 3000000, |
| MinAssertDur4s = 4000000, |
| }; |
| |
| /* Signal Assertion duration values */ |
| struct cfg_assert_dur { |
| /* Minimum assertion duration of SLP_A signal */ |
| enum min_assert_dur slp_a; |
| |
| /* Minimum assertion duration of SLP_4 signal */ |
| enum min_assert_dur slp_s4; |
| |
| /* Minimum assertion duration of SLP_3 signal */ |
| enum min_assert_dur slp_s3; |
| |
| /* PCH PM Power Cycle duration */ |
| enum min_assert_dur pm_pwr_cyc_dur; |
| }; |
| |
| /* Default value of PchPmPwrCycDur */ |
| #define PCH_PM_PWR_CYC_DUR 0 |
| |
| struct chipset_power_state *pmc_get_power_state(void) |
| { |
| struct chipset_power_state *ptr = NULL; |
| |
| if (cbmem_possibly_online()) |
| ptr = cbmem_find(CBMEM_ID_POWER_STATE); |
| |
| /* cbmem is online but ptr is not populated yet */ |
| if (ptr == NULL && !(ENV_RAMSTAGE || ENV_POSTCAR)) |
| return &power_state; |
| |
| return ptr; |
| } |
| |
| static void migrate_power_state(int is_recovery) |
| { |
| struct chipset_power_state *ps_cbmem; |
| |
| ps_cbmem = cbmem_add(CBMEM_ID_POWER_STATE, sizeof(*ps_cbmem)); |
| |
| if (ps_cbmem == NULL) { |
| printk(BIOS_DEBUG, "Not adding power state to cbmem!\n"); |
| return; |
| } |
| memcpy(ps_cbmem, &power_state, sizeof(*ps_cbmem)); |
| } |
| ROMSTAGE_CBMEM_INIT_HOOK(migrate_power_state) |
| |
| static void print_num_status_bits(int num_bits, uint32_t status, |
| const char *const bit_names[]) |
| { |
| int i; |
| |
| if (!status) |
| return; |
| |
| for (i = num_bits - 1; i >= 0; i--) { |
| if (status & (1 << i)) { |
| if (bit_names[i]) |
| printk(BIOS_DEBUG, "%s ", bit_names[i]); |
| else |
| printk(BIOS_DEBUG, "BIT%d ", i); |
| } |
| } |
| } |
| |
| __weak uint32_t soc_get_smi_status(uint32_t generic_sts) |
| { |
| return generic_sts; |
| } |
| |
| int acpi_get_sleep_type(void) |
| { |
| struct chipset_power_state *ps; |
| int prev_sleep_state = ACPI_S0; |
| |
| ps = pmc_get_power_state(); |
| if (ps) |
| prev_sleep_state = ps->prev_sleep_state; |
| |
| return prev_sleep_state; |
| } |
| |
| static uint32_t pmc_reset_smi_status(void) |
| { |
| uint32_t smi_sts = inl(ACPI_BASE_ADDRESS + SMI_STS); |
| outl(smi_sts, ACPI_BASE_ADDRESS + SMI_STS); |
| |
| return soc_get_smi_status(smi_sts); |
| } |
| |
| static uint32_t print_smi_status(uint32_t smi_sts) |
| { |
| size_t array_size; |
| const char *const *smi_arr; |
| |
| if (!smi_sts) |
| return 0; |
| |
| printk(BIOS_DEBUG, "SMI_STS: "); |
| |
| smi_arr = soc_smi_sts_array(&array_size); |
| |
| print_num_status_bits(array_size, smi_sts, smi_arr); |
| printk(BIOS_DEBUG, "\n"); |
| |
| return smi_sts; |
| } |
| |
| /* |
| * Update supplied events in PM1_EN register. This does not disable any already |
| * set events. |
| */ |
| void pmc_update_pm1_enable(u16 events) |
| { |
| u16 pm1_en = pmc_read_pm1_enable(); |
| pm1_en |= events; |
| pmc_enable_pm1(pm1_en); |
| } |
| |
| /* Read events set in PM1_EN register. */ |
| uint16_t pmc_read_pm1_enable(void) |
| { |
| return inw(ACPI_BASE_ADDRESS + PM1_EN); |
| } |
| |
| uint32_t pmc_clear_smi_status(void) |
| { |
| uint32_t sts = pmc_reset_smi_status(); |
| |
| return print_smi_status(sts); |
| } |
| |
| uint32_t pmc_get_smi_en(void) |
| { |
| return inl(ACPI_BASE_ADDRESS + SMI_EN); |
| } |
| |
| void pmc_enable_smi(uint32_t mask) |
| { |
| uint32_t smi_en = inl(ACPI_BASE_ADDRESS + SMI_EN); |
| smi_en |= mask; |
| outl(smi_en, ACPI_BASE_ADDRESS + SMI_EN); |
| } |
| |
| void pmc_disable_smi(uint32_t mask) |
| { |
| uint32_t smi_en = inl(ACPI_BASE_ADDRESS + SMI_EN); |
| smi_en &= ~mask; |
| outl(smi_en, ACPI_BASE_ADDRESS + SMI_EN); |
| } |
| |
| /* PM1 */ |
| void pmc_enable_pm1(uint16_t events) |
| { |
| outw(events, ACPI_BASE_ADDRESS + PM1_EN); |
| } |
| |
| uint32_t pmc_read_pm1_control(void) |
| { |
| return inl(ACPI_BASE_ADDRESS + PM1_CNT); |
| } |
| |
| void pmc_write_pm1_control(uint32_t pm1_cnt) |
| { |
| outl(pm1_cnt, ACPI_BASE_ADDRESS + PM1_CNT); |
| } |
| |
| void pmc_enable_pm1_control(uint32_t mask) |
| { |
| uint32_t pm1_cnt = pmc_read_pm1_control(); |
| pm1_cnt |= mask; |
| pmc_write_pm1_control(pm1_cnt); |
| } |
| |
| void pmc_disable_pm1_control(uint32_t mask) |
| { |
| uint32_t pm1_cnt = pmc_read_pm1_control(); |
| pm1_cnt &= ~mask; |
| pmc_write_pm1_control(pm1_cnt); |
| } |
| |
| static uint16_t reset_pm1_status(void) |
| { |
| uint16_t pm1_sts = inw(ACPI_BASE_ADDRESS + PM1_STS); |
| outw(pm1_sts, ACPI_BASE_ADDRESS + PM1_STS); |
| return pm1_sts; |
| } |
| |
| static uint16_t print_pm1_status(uint16_t pm1_sts) |
| { |
| static const char *const pm1_sts_bits[] = { |
| [0] = "TMROF", |
| [5] = "GBL", |
| [8] = "PWRBTN", |
| [10] = "RTC", |
| [11] = "PRBTNOR", |
| [13] = "USB", |
| [14] = "PCIEXPWAK", |
| [15] = "WAK", |
| }; |
| |
| if (!pm1_sts) |
| return 0; |
| |
| printk(BIOS_SPEW, "PM1_STS: "); |
| print_num_status_bits(ARRAY_SIZE(pm1_sts_bits), pm1_sts, pm1_sts_bits); |
| printk(BIOS_SPEW, "\n"); |
| |
| return pm1_sts; |
| } |
| |
| uint16_t pmc_clear_pm1_status(void) |
| { |
| return print_pm1_status(reset_pm1_status()); |
| } |
| |
| /* TCO */ |
| |
| static uint32_t print_tco_status(uint32_t tco_sts) |
| { |
| size_t array_size; |
| const char *const *tco_arr; |
| |
| if (!tco_sts) |
| return 0; |
| |
| printk(BIOS_DEBUG, "TCO_STS: "); |
| |
| tco_arr = soc_tco_sts_array(&array_size); |
| |
| print_num_status_bits(array_size, tco_sts, tco_arr); |
| printk(BIOS_DEBUG, "\n"); |
| |
| return tco_sts; |
| } |
| |
| uint32_t pmc_clear_tco_status(void) |
| { |
| return print_tco_status(tco_reset_status()); |
| } |
| |
| /* GPE */ |
| static void pmc_enable_gpe(int gpe, uint32_t mask) |
| { |
| uint32_t gpe0_en = inl(ACPI_BASE_ADDRESS + GPE0_EN(gpe)); |
| gpe0_en |= mask; |
| outl(gpe0_en, ACPI_BASE_ADDRESS + GPE0_EN(gpe)); |
| } |
| |
| static void pmc_disable_gpe(int gpe, uint32_t mask) |
| { |
| uint32_t gpe0_en = inl(ACPI_BASE_ADDRESS + GPE0_EN(gpe)); |
| gpe0_en &= ~mask; |
| outl(gpe0_en, ACPI_BASE_ADDRESS + GPE0_EN(gpe)); |
| } |
| |
| void pmc_enable_std_gpe(uint32_t mask) |
| { |
| pmc_enable_gpe(GPE_STD, mask); |
| } |
| |
| void pmc_disable_std_gpe(uint32_t mask) |
| { |
| pmc_disable_gpe(GPE_STD, mask); |
| } |
| |
| void pmc_disable_all_gpe(void) |
| { |
| int i; |
| for (i = 0; i < GPE0_REG_MAX; i++) |
| pmc_disable_gpe(i, ~0); |
| } |
| |
| /* Clear the gpio gpe0 status bits in ACPI registers */ |
| static void pmc_clear_gpi_gpe_status(void) |
| { |
| int i; |
| |
| for (i = 0; i < GPE0_REG_MAX; i++) { |
| /* This is reserved GPE block and specific to chipset */ |
| if (i == GPE_STD) |
| continue; |
| uint32_t gpe_sts = inl(ACPI_BASE_ADDRESS + GPE0_STS(i)); |
| outl(gpe_sts, ACPI_BASE_ADDRESS + GPE0_STS(i)); |
| } |
| } |
| |
| static uint32_t reset_std_gpe_status(void) |
| { |
| uint32_t gpe_sts = inl(ACPI_BASE_ADDRESS + GPE0_STS(GPE_STD)); |
| outl(gpe_sts, ACPI_BASE_ADDRESS + GPE0_STS(GPE_STD)); |
| return gpe_sts; |
| } |
| |
| static uint32_t print_std_gpe_sts(uint32_t gpe_sts) |
| { |
| size_t array_size; |
| const char *const *sts_arr; |
| |
| if (!gpe_sts) |
| return gpe_sts; |
| |
| printk(BIOS_DEBUG, "GPE0 STD STS: "); |
| |
| sts_arr = soc_std_gpe_sts_array(&array_size); |
| print_num_status_bits(array_size, gpe_sts, sts_arr); |
| printk(BIOS_DEBUG, "\n"); |
| |
| return gpe_sts; |
| } |
| |
| static void pmc_clear_std_gpe_status(void) |
| { |
| print_std_gpe_sts(reset_std_gpe_status()); |
| } |
| |
| void pmc_clear_all_gpe_status(void) |
| { |
| pmc_clear_std_gpe_status(); |
| pmc_clear_gpi_gpe_status(); |
| } |
| |
| __weak |
| void soc_clear_pm_registers(uintptr_t pmc_bar) |
| { |
| } |
| |
| void pmc_clear_prsts(void) |
| { |
| uint32_t prsts; |
| uintptr_t pmc_bar; |
| |
| /* Read PMC base address from soc */ |
| pmc_bar = soc_read_pmc_base(); |
| |
| prsts = read32((void *)(pmc_bar + PRSTS)); |
| write32((void *)(pmc_bar + PRSTS), prsts); |
| |
| soc_clear_pm_registers(pmc_bar); |
| } |
| |
| __weak |
| int soc_prev_sleep_state(const struct chipset_power_state *ps, |
| int prev_sleep_state) |
| { |
| return prev_sleep_state; |
| } |
| |
| /* |
| * Returns prev_sleep_state and also prints all power management registers. |
| * Calls soc_prev_sleep_state which may be implemented by SOC. |
| */ |
| static int pmc_prev_sleep_state(const struct chipset_power_state *ps) |
| { |
| /* Default to S0. */ |
| int prev_sleep_state = ACPI_S0; |
| |
| if (ps->pm1_sts & WAK_STS) { |
| switch (acpi_sleep_from_pm1(ps->pm1_cnt)) { |
| case ACPI_S3: |
| if (CONFIG(HAVE_ACPI_RESUME)) |
| prev_sleep_state = ACPI_S3; |
| break; |
| case ACPI_S5: |
| prev_sleep_state = ACPI_S5; |
| break; |
| } |
| |
| /* Clear SLP_TYP. */ |
| pmc_write_pm1_control(ps->pm1_cnt & ~(SLP_TYP)); |
| } |
| return soc_prev_sleep_state(ps, prev_sleep_state); |
| } |
| |
| void pmc_fill_pm_reg_info(struct chipset_power_state *ps) |
| { |
| int i; |
| |
| memset(ps, 0, sizeof(*ps)); |
| |
| ps->pm1_sts = inw(ACPI_BASE_ADDRESS + PM1_STS); |
| ps->pm1_en = inw(ACPI_BASE_ADDRESS + PM1_EN); |
| ps->pm1_cnt = pmc_read_pm1_control(); |
| |
| printk(BIOS_DEBUG, "pm1_sts: %04x pm1_en: %04x pm1_cnt: %08x\n", |
| ps->pm1_sts, ps->pm1_en, ps->pm1_cnt); |
| |
| for (i = 0; i < GPE0_REG_MAX; i++) { |
| ps->gpe0_sts[i] = inl(ACPI_BASE_ADDRESS + GPE0_STS(i)); |
| ps->gpe0_en[i] = inl(ACPI_BASE_ADDRESS + GPE0_EN(i)); |
| printk(BIOS_DEBUG, "gpe0_sts[%d]: %08x gpe0_en[%d]: %08x\n", |
| i, ps->gpe0_sts[i], i, ps->gpe0_en[i]); |
| } |
| |
| soc_fill_power_state(ps); |
| } |
| |
| /* Reads and prints ACPI specific PM registers */ |
| int pmc_fill_power_state(struct chipset_power_state *ps) |
| { |
| pmc_fill_pm_reg_info(ps); |
| |
| ps->prev_sleep_state = pmc_prev_sleep_state(ps); |
| printk(BIOS_DEBUG, "prev_sleep_state %d\n", ps->prev_sleep_state); |
| |
| return ps->prev_sleep_state; |
| } |
| |
| #if CONFIG(PMC_GLOBAL_RESET_ENABLE_LOCK) |
| void pmc_global_reset_disable_and_lock(void) |
| { |
| uint32_t *etr = soc_pmc_etr_addr(); |
| uint32_t reg; |
| |
| reg = read32(etr); |
| reg = (reg & ~CF9_GLB_RST) | CF9_LOCK; |
| write32(etr, reg); |
| } |
| |
| void pmc_global_reset_enable(bool enable) |
| { |
| uint32_t *etr = soc_pmc_etr_addr(); |
| uint32_t reg; |
| |
| reg = read32(etr); |
| reg = enable ? reg | CF9_GLB_RST : reg & ~CF9_GLB_RST; |
| write32(etr, reg); |
| } |
| #endif // CONFIG_PMC_GLOBAL_RESET_ENABLE_LOCK |
| |
| int platform_is_resuming(void) |
| { |
| if (!(inw(ACPI_BASE_ADDRESS + PM1_STS) & WAK_STS)) |
| return 0; |
| |
| return acpi_sleep_from_pm1(pmc_read_pm1_control()) == ACPI_S3; |
| } |
| |
| /* Read and clear GPE status (defined in acpi/acpi.h) */ |
| int acpi_get_gpe(int gpe) |
| { |
| int bank; |
| uint32_t mask, sts; |
| struct stopwatch sw; |
| int rc = 0; |
| |
| if (gpe < 0 || gpe > GPE_MAX) |
| return -1; |
| |
| bank = gpe / 32; |
| mask = 1 << (gpe % 32); |
| |
| /* Wait up to 1ms for GPE status to clear */ |
| stopwatch_init_msecs_expire(&sw, 1); |
| do { |
| if (stopwatch_expired(&sw)) |
| return rc; |
| |
| sts = inl(ACPI_BASE_ADDRESS + GPE0_STS(bank)); |
| if (sts & mask) { |
| outl(mask, ACPI_BASE_ADDRESS + GPE0_STS(bank)); |
| rc = 1; |
| } |
| } while (sts & mask); |
| |
| return rc; |
| } |
| |
| /* |
| * The PM1 control is set to S5 when vboot requests a reboot because the power |
| * state code above may not have collected its data yet. Therefore, set it to |
| * S5 when vboot requests a reboot. That's necessary if vboot fails in the |
| * resume path and requests a reboot. This prevents a reboot loop where the |
| * error is continually hit on the failing vboot resume path. |
| */ |
| void vboot_platform_prepare_reboot(void) |
| { |
| uint32_t pm1_cnt; |
| pm1_cnt = (pmc_read_pm1_control() & ~(SLP_TYP)) | |
| (SLP_TYP_S5 << SLP_TYP_SHIFT); |
| pmc_write_pm1_control(pm1_cnt); |
| } |
| |
| void poweroff(void) |
| { |
| pmc_enable_pm1_control(SLP_EN | (SLP_TYP_S5 << SLP_TYP_SHIFT)); |
| |
| /* |
| * Setting SLP_TYP_S5 in PM1 triggers SLP_SMI, which is handled by SMM |
| * to transition to S5 state. If halt is called in SMM, then it prevents |
| * the SMI handler from being triggered and system never enters S5. |
| */ |
| if (!ENV_SMM) |
| halt(); |
| } |
| |
| void pmc_gpe_init(void) |
| { |
| uint32_t gpio_cfg = 0; |
| uint32_t gpio_cfg_reg; |
| uint8_t dw0, dw1, dw2; |
| |
| /* Read PMC base address from soc. This is implemented in soc */ |
| uintptr_t pmc_bar = soc_read_pmc_base(); |
| |
| /* |
| * Get the dwX values for pmc gpe settings. |
| */ |
| soc_get_gpi_gpe_configs(&dw0, &dw1, &dw2); |
| |
| const uint32_t gpio_cfg_mask = |
| (GPE0_DWX_MASK << GPE0_DW_SHIFT(0)) | |
| (GPE0_DWX_MASK << GPE0_DW_SHIFT(1)) | |
| (GPE0_DWX_MASK << GPE0_DW_SHIFT(2)); |
| |
| /* Making sure that bad values don't bleed into the other fields */ |
| dw0 &= GPE0_DWX_MASK; |
| dw1 &= GPE0_DWX_MASK; |
| dw2 &= GPE0_DWX_MASK; |
| |
| /* |
| * Route the GPIOs to the GPE0 block. Determine that all values |
| * are different, and if they aren't use the reset values. |
| */ |
| if (dw0 == dw1 || dw1 == dw2) { |
| printk(BIOS_INFO, "PMC: Using default GPE route.\n"); |
| gpio_cfg = read32((void *)pmc_bar + GPIO_GPE_CFG); |
| |
| dw0 = (gpio_cfg >> GPE0_DW_SHIFT(0)) & GPE0_DWX_MASK; |
| dw1 = (gpio_cfg >> GPE0_DW_SHIFT(1)) & GPE0_DWX_MASK; |
| dw2 = (gpio_cfg >> GPE0_DW_SHIFT(2)) & GPE0_DWX_MASK; |
| } else { |
| gpio_cfg |= (uint32_t) dw0 << GPE0_DW_SHIFT(0); |
| gpio_cfg |= (uint32_t) dw1 << GPE0_DW_SHIFT(1); |
| gpio_cfg |= (uint32_t) dw2 << GPE0_DW_SHIFT(2); |
| } |
| |
| gpio_cfg_reg = read32((void *)pmc_bar + GPIO_GPE_CFG) & ~gpio_cfg_mask; |
| gpio_cfg_reg |= gpio_cfg & gpio_cfg_mask; |
| |
| write32((void *)pmc_bar + GPIO_GPE_CFG, gpio_cfg_reg); |
| |
| /* Set the routes in the GPIO communities as well. */ |
| gpio_route_gpe(dw0, dw1, dw2); |
| } |
| |
| void pmc_set_power_failure_state(const bool target_on) |
| { |
| bool on; |
| |
| uint8_t state = CONFIG_MAINBOARD_POWER_FAILURE_STATE; |
| get_option(&state, "power_on_after_fail"); |
| |
| switch (state) { |
| case MAINBOARD_POWER_STATE_OFF: |
| printk(BIOS_INFO, "Set power off after power failure.\n"); |
| on = false; |
| break; |
| case MAINBOARD_POWER_STATE_ON: |
| printk(BIOS_INFO, "Set power on after power failure.\n"); |
| on = true; |
| break; |
| case MAINBOARD_POWER_STATE_PREVIOUS: |
| printk(BIOS_INFO, "Keep power state after power failure.\n"); |
| on = target_on; |
| break; |
| default: |
| printk(BIOS_WARNING, "WARNING: Unknown power-failure state: %d\n", state); |
| on = false; |
| break; |
| } |
| |
| pmc_soc_set_afterg3_en(on); |
| } |
| |
| /* This function returns the highest assertion duration of the SLP_Sx assertion widths */ |
| static enum min_assert_dur get_high_assert_width(const struct cfg_assert_dur *cfg_assert_dur) |
| { |
| enum min_assert_dur max_assert_dur = cfg_assert_dur->slp_s4; |
| |
| if (max_assert_dur < cfg_assert_dur->slp_s3) |
| max_assert_dur = cfg_assert_dur->slp_s3; |
| |
| if (max_assert_dur < cfg_assert_dur->slp_a) |
| max_assert_dur = cfg_assert_dur->slp_a; |
| |
| return max_assert_dur; |
| } |
| |
| /* This function converts assertion durations from register-encoded to microseconds */ |
| static void get_min_assert_dur(uint8_t slp_s4_min_assert, uint8_t slp_s3_min_assert, |
| uint8_t slp_a_min_assert, uint8_t pm_pwr_cyc_dur, |
| struct cfg_assert_dur *cfg_assert_dur) |
| { |
| /* |
| * Ensure slp_x_dur_list[] elements in the devicetree config are in sync with |
| * FSP encoded values. |
| */ |
| |
| /* slp_s4_assert_dur_list : 1s, 1s(default), 2s, 3s, 4s */ |
| const enum min_assert_dur slp_s4_assert_dur_list[] = { |
| MinAssertDur1s, MinAssertDur1s, MinAssertDur2s, MinAssertDur3s, MinAssertDur4s |
| }; |
| |
| /* slp_s3_assert_dur_list: 50ms, 60us, 1ms, 50ms (Default), 2s */ |
| const enum min_assert_dur slp_s3_assert_dur_list[] = { |
| MinAssertDur50ms, MinAssertDur60us, MinAssertDur1ms, MinAssertDur50ms, |
| MinAssertDur2s |
| }; |
| |
| /* slp_a_assert_dur_list: 2s, 0s, 4s, 98ms, 2s(Default) */ |
| const enum min_assert_dur slp_a_assert_dur_list[] = { |
| MinAssertDur2s, MinAssertDur0s, MinAssertDur4s, MinAssertDur98ms, MinAssertDur2s |
| }; |
| |
| /* pm_pwr_cyc_dur_list: 4s(Default), 1s, 2s, 3s, 4s */ |
| const enum min_assert_dur pm_pwr_cyc_dur_list[] = { |
| MinAssertDur4s, MinAssertDur1s, MinAssertDur2s, MinAssertDur3s, MinAssertDur4s |
| }; |
| |
| /* Get signal assertion width */ |
| if (slp_s4_min_assert < ARRAY_SIZE(slp_s4_assert_dur_list)) |
| cfg_assert_dur->slp_s4 = slp_s4_assert_dur_list[slp_s4_min_assert]; |
| |
| if (slp_s3_min_assert < ARRAY_SIZE(slp_s3_assert_dur_list)) |
| cfg_assert_dur->slp_s3 = slp_s3_assert_dur_list[slp_s3_min_assert]; |
| |
| if (slp_a_min_assert < ARRAY_SIZE(slp_a_assert_dur_list)) |
| cfg_assert_dur->slp_a = slp_a_assert_dur_list[slp_a_min_assert]; |
| |
| if (pm_pwr_cyc_dur < ARRAY_SIZE(pm_pwr_cyc_dur_list)) |
| cfg_assert_dur->pm_pwr_cyc_dur = pm_pwr_cyc_dur_list[pm_pwr_cyc_dur]; |
| } |
| |
| /* |
| * This function ensures that the duration programmed in the PchPmPwrCycDur will never be |
| * smaller than the SLP_Sx assertion widths. |
| * If the pm_pwr_cyc_dur is less than any of the SLP_Sx assertion widths then it returns the |
| * default value PCH_PM_PWR_CYC_DUR. |
| */ |
| uint8_t get_pm_pwr_cyc_dur(uint8_t slp_s4_min_assert, uint8_t slp_s3_min_assert, |
| uint8_t slp_a_min_assert, uint8_t pm_pwr_cyc_dur) |
| { |
| /* Set default values for the minimum assertion duration */ |
| struct cfg_assert_dur cfg_assert_dur = { |
| .slp_a = MinAssertDur2s, |
| .slp_s4 = MinAssertDur1s, |
| .slp_s3 = MinAssertDur50ms, |
| .pm_pwr_cyc_dur = MinAssertDur4s |
| }; |
| |
| enum min_assert_dur high_assert_width; |
| |
| /* Convert assertion durations from register-encoded to microseconds */ |
| get_min_assert_dur(slp_s4_min_assert, slp_s3_min_assert, slp_a_min_assert, |
| pm_pwr_cyc_dur, &cfg_assert_dur); |
| |
| /* Get the highest assertion duration among PCH EDS specified signals for pwr_cyc_dur */ |
| high_assert_width = get_high_assert_width(&cfg_assert_dur); |
| |
| if (cfg_assert_dur.pm_pwr_cyc_dur >= high_assert_width) |
| return pm_pwr_cyc_dur; |
| |
| printk(BIOS_DEBUG, |
| "Set PmPwrCycDur to 4s as configured PmPwrCycDur (%d) violates PCH EDS " |
| "spec\n", pm_pwr_cyc_dur); |
| |
| return PCH_PM_PWR_CYC_DUR; |
| } |
| |
| #if CONFIG(PMC_LOW_POWER_MODE_PROGRAM) |
| void pmc_disable_acpi_timer(void) |
| { |
| uint8_t *pmcbase = pmc_mmio_regs(); |
| |
| setbits8(pmcbase + PCH_PWRM_ACPI_TMR_CTL, ACPI_TIM_DIS); |
| } |
| #endif /* PMC_LOW_POWER_MODE_PROGRAM */ |
| |
| void pmc_set_acpi_mode(void) |
| { |
| if (!CONFIG(NO_SMM) && !acpi_is_wakeup_s3()) { |
| apm_control(APM_CNT_ACPI_DISABLE); |
| } |
| } |