| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <string.h> |
| #include <cbfs.h> |
| #include <console/console.h> |
| #include <cpu/intel/haswell/haswell.h> |
| #include <northbridge/intel/haswell/haswell.h> |
| #include <northbridge/intel/haswell/raminit.h> |
| #include <southbridge/intel/lynxpoint/pch.h> |
| #include <southbridge/intel/lynxpoint/lp_gpio.h> |
| #include "../../variant.h" |
| |
| /* Copy SPD data for on-board memory */ |
| void copy_spd(struct pei_data *peid) |
| { |
| const int gpio_vector[] = {13, 9, 47, -1}; |
| int spd_index = get_gpios(gpio_vector); |
| char *spd_file; |
| size_t spd_file_len; |
| size_t spd_len = sizeof(peid->spd_data[0]); |
| |
| printk(BIOS_DEBUG, "SPD index %d\n", spd_index); |
| spd_file = cbfs_map("spd.bin", &spd_file_len); |
| if (!spd_file) |
| die("SPD data not found."); |
| |
| if (spd_file_len < ((spd_index + 1) * spd_len)) { |
| printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n"); |
| spd_index = 0; |
| } |
| |
| if (spd_file_len < spd_len) |
| die("Missing SPD data."); |
| |
| memcpy(peid->spd_data[0], spd_file + (spd_index * spd_len), spd_len); |
| |
| /* Limiting to a single dimm for 2GB configuration |
| * Identified by bit 3 |
| */ |
| if (spd_index & 0x4) |
| peid->dimm_channel1_disabled = 3; |
| else |
| memcpy(peid->spd_data[1], |
| spd_file + (spd_index * spd_len), spd_len); |
| } |
| |
| void variant_romstage_entry(struct pei_data *pei_data) |
| { |
| struct usb2_port_setting usb2_ports[MAX_USB2_PORTS] = { |
| /* Length, Enable, OCn#, Location */ |
| { 0x0040, 1, 0, /* P0: Port A, CN10 */ |
| USB_PORT_BACK_PANEL }, |
| { 0x0040, 1, 2, /* P1: Port B, CN11 */ |
| USB_PORT_BACK_PANEL }, |
| { 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */ |
| USB_PORT_INTERNAL }, |
| { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */ |
| USB_PORT_MINI_PCIE }, |
| { 0x0080, 1, USB_OC_PIN_SKIP, /* P4: SD Card */ |
| USB_PORT_INTERNAL }, |
| { 0x0040, 1, USB_OC_PIN_SKIP, /* P5: LTE */ |
| USB_PORT_INTERNAL }, |
| { 0x0040, 1, USB_OC_PIN_SKIP, /* P6: SIM CARD */ |
| USB_PORT_FLEX }, |
| { 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */ |
| USB_PORT_SKIP }, |
| }; |
| |
| struct usb3_port_setting usb3_ports[MAX_USB3_PORTS] = { |
| /* Enable, OCn# */ |
| { 1, 0 }, /* P1; Port A, CN10 */ |
| { 1, 2 }, /* P2; Port B, CN11 */ |
| { 0, USB_OC_PIN_SKIP }, /* P3; */ |
| { 0, USB_OC_PIN_SKIP }, /* P4; */ |
| }; |
| |
| memcpy(pei_data->usb2_ports, usb2_ports, sizeof(usb2_ports)); |
| memcpy(pei_data->usb3_ports, usb3_ports, sizeof(usb3_ports)); |
| } |