| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright 2013 Google Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <types.h> |
| #include <string.h> |
| #include <stdlib.h> |
| #include <device/device.h> |
| #include <device/device.h> |
| #include <device/pci_def.h> |
| #include <device/pci_ops.h> |
| #include <console/console.h> |
| #include <delay.h> |
| #include <pc80/mc146818rtc.h> |
| #include <arch/acpi.h> |
| #include <arch/io.h> |
| #include <arch/interrupt.h> |
| #include <boot/coreboot_tables.h> |
| #include <smbios.h> |
| #include <device/pci.h> |
| #include <ec/google/chromeec/ec.h> |
| #include <cbfs_core.h> |
| |
| #include <cpu/x86/tsc.h> |
| #include <cpu/x86/cache.h> |
| #include <cpu/x86/mtrr.h> |
| #include <cpu/x86/msr.h> |
| #include <edid.h> |
| #include <drivers/intel/gma/i915.h> |
| #include <northbridge/intel/haswell/haswell.h> |
| #include "mainboard.h" |
| |
| /* |
| * Here is the rough outline of how we bring up the display: |
| * 1. Upon power-on Sink generates a hot plug detection pulse thru HPD |
| * 2. Source determines video mode by reading DPCD receiver capability field |
| * (DPCD 00000h to 0000Dh) including eDP CP capability register (DPCD |
| * 0000Dh). |
| * 3. Sink replies DPCD receiver capability field. |
| * 4. Source starts EDID read thru I2C-over-AUX. |
| * 5. Sink replies EDID thru I2C-over-AUX. |
| * 6. Source determines link configuration, such as MAX_LINK_RATE and |
| * MAX_LANE_COUNT. Source also determines which type of eDP Authentication |
| * method to use and writes DPCD link configuration field (DPCD 00100h to |
| * 0010Ah) including eDP configuration set (DPCD 0010Ah). |
| * 7. Source starts link training. Sink does clock recovery and equalization. |
| * 8. Source reads DPCD link status field (DPCD 00200h to 0020Bh). |
| * 9. Sink replies DPCD link status field. If main link is not stable, Source |
| * repeats Step 7. |
| * 10. Source sends MSA (Main Stream Attribute) data. Sink extracts video |
| * parameters and recovers stream clock. |
| * 11. Source sends video data. |
| */ |
| |
| /* how many bytes do we need for the framebuffer? |
| * Well, this gets messy. To get an exact answer, we have |
| * to ask the panel, but we'd rather zero the memory |
| * and set up the gtt while the panel powers up. So, |
| * we take a reasonable guess, secure in the knowledge that the |
| * MRC has to overestimate the number of bytes used. |
| * 8 MiB is a very safe guess. There may be a better way later, but |
| * fact is, the initial framebuffer is only very temporary. And taking |
| * a little long is ok; this is done much faster than the AUX |
| * channel is ready for IO. |
| */ |
| #define FRAME_BUFFER_BYTES (8*MiB) |
| /* how many 4096-byte pages do we need for the framebuffer? |
| * There are hard ways to get this, and easy ways: |
| * there are FRAME_BUFFER_BYTES/4096 pages, since pages are 4096 |
| * on this chip (and in fact every Intel graphics chip we've seen). |
| */ |
| #define FRAME_BUFFER_PAGES (FRAME_BUFFER_BYTES/(4096)) |
| |
| static int i915_init_done = 0; |
| |
| /* fill the palette. */ |
| static void palette(void) |
| { |
| int i; |
| unsigned long color = 0; |
| |
| for(i = 0; i < 256; i++, color += 0x010101){ |
| gtt_write(_LGC_PALETTE_A + (i<<2),color); |
| } |
| } |
| |
| void mainboard_train_link(struct intel_dp *intel_dp) |
| { |
| u8 read_val; |
| u8 link_status[DP_LINK_STATUS_SIZE]; |
| |
| gtt_write(DP_TP_CTL(intel_dp->port),DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE); |
| gtt_write(DP_A, DP_PORT_EN | DP_LINK_TRAIN_PAT_1 | DP_LINK_TRAIN_PAT_1_CPT | DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0 | DP_PORT_WIDTH_1 | DP_PLL_FREQ_270MHZ | DP_SYNC_VS_HIGH |0x80000011); |
| |
| intel_dp_get_training_pattern(intel_dp, &read_val); |
| intel_dp_set_training_pattern(intel_dp, DP_TRAINING_PATTERN_1 | DP_LINK_QUAL_PATTERN_DISABLE | DP_SYMBOL_ERROR_COUNT_BOTH); |
| intel_dp_get_lane_count(intel_dp, &read_val); |
| intel_dp_set_training_lane0(intel_dp, DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0); |
| intel_dp_get_link_status(intel_dp, link_status); |
| |
| gtt_write(DP_TP_CTL(intel_dp->port),DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE | DP_TP_CTL_LINK_TRAIN_PAT2); |
| |
| intel_dp_get_training_pattern(intel_dp, &read_val); |
| intel_dp_set_training_pattern(intel_dp, DP_TRAINING_PATTERN_2 | DP_LINK_QUAL_PATTERN_DISABLE | DP_SYMBOL_ERROR_COUNT_BOTH); |
| intel_dp_get_link_status(intel_dp, link_status); |
| intel_dp_get_lane_align_status(intel_dp, &read_val); |
| intel_dp_get_training_pattern(intel_dp, &read_val); |
| intel_dp_set_training_pattern(intel_dp, DP_TRAINING_PATTERN_DISABLE | DP_LINK_QUAL_PATTERN_DISABLE | DP_SYMBOL_ERROR_COUNT_BOTH); |
| } |
| |
| #define TEST_GFX 0 |
| |
| #if TEST_GFX |
| static void test_gfx(struct intel_dp *dp) |
| { |
| int i; |
| |
| /* This is a sanity test code which fills the screen with two bands -- |
| green and blue. It is very useful to ensure all the initializations |
| are made right. Thus, to be used only for testing, not otherwise |
| */ |
| for (i = 0; i < (dp->edid.va - 4); i++) { |
| u32 *l; |
| int j; |
| u32 tcolor = 0x0ff; |
| for (j = 0; j < (dp->edid.ha-4); j++) { |
| if (j == (dp->edid.ha/2)) { |
| tcolor = 0xff00; |
| } |
| l = (u32*)(graphics + i * dp->stride + j * sizeof(tcolor)); |
| memcpy(l,&tcolor,sizeof(tcolor)); |
| } |
| } |
| } |
| #else |
| static void test_gfx(struct intel_dp *dp) {} |
| #endif |
| |
| |
| void mainboard_set_port_clk_dp(struct intel_dp *intel_dp) |
| { |
| u32 ddi_pll_sel = 0; |
| |
| switch (intel_dp->link_bw) { |
| case DP_LINK_BW_1_62: |
| ddi_pll_sel = PORT_CLK_SEL_LCPLL_810; |
| break; |
| case DP_LINK_BW_2_7: |
| ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350; |
| break; |
| case DP_LINK_BW_5_4: |
| ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700; |
| break; |
| default: |
| printk(BIOS_ERR, "invalid link bw %d\n", intel_dp->link_bw); |
| return; |
| } |
| |
| gtt_write(PORT_CLK_SEL(intel_dp->port), ddi_pll_sel); |
| } |
| |
| int panel_lightup(struct intel_dp *dp, unsigned int init_fb) |
| { |
| int i; |
| int edid_ok; |
| int pixels = FRAME_BUFFER_BYTES/64; |
| |
| void runio(struct intel_dp *dp); |
| |
| dp->gen = 8; // This is gen 8 which we believe is Haswell |
| dp->is_haswell = 1; |
| dp->DP = 0x2; |
| /* These values are used for training the link */ |
| dp->lane_count = 2; |
| dp->link_bw = DP_LINK_BW_2_7; |
| dp->panel_power_down_delay = 600; |
| dp->panel_power_up_delay = 200; |
| dp->panel_power_cycle_delay = 600; |
| dp->pipe = PIPE_A; |
| dp->port = PORT_A; |
| dp->plane = PLANE_A; |
| dp->clock = 160000; |
| dp->pipe_bits_per_pixel = 32; |
| dp->type = INTEL_OUTPUT_EDP; |
| dp->output_reg = DP_A; |
| /* observed from YABEL. */ |
| dp->aux_clock_divider = 0xe1; |
| dp->precharge = 3; |
| |
| /* 1. Normal mode: Set the first page to zero and make |
| all GTT entries point to the same page |
| 2. Developer/Recovery mode: We do not zero out all |
| the pages pointed to by GTT in order to avoid wasting time */ |
| if (init_fb){ |
| set_translation_table(0, FRAME_BUFFER_PAGES, dp->physbase, 4096); |
| memset((void *)dp->graphics, 0x55, FRAME_BUFFER_PAGES*4096); |
| } else { |
| set_translation_table(0, FRAME_BUFFER_PAGES, dp->physbase, 0); |
| memset((void*)dp->graphics, 0, 4096); |
| } |
| |
| dp->address = 0x50; |
| |
| if ( !intel_dp_get_dpcd(dp) ) |
| goto fail; |
| |
| intel_dp_i2c_aux_ch(dp, MODE_I2C_WRITE, 0, NULL); |
| for(dp->edidlen = i = 0; i < sizeof(dp->rawedid); i++){ |
| if (intel_dp_i2c_aux_ch(dp, MODE_I2C_READ, |
| 0x50, &dp->rawedid[i]) < 0) |
| break; |
| dp->edidlen++; |
| } |
| |
| edid_ok = decode_edid(dp->rawedid, dp->edidlen, &dp->edid); |
| printk(BIOS_SPEW, "decode edid returns %d\n", edid_ok); |
| |
| compute_display_params(dp); |
| |
| intel_ddi_set_pipe_settings(dp); |
| |
| runio(dp); |
| |
| palette(); |
| |
| pixels = dp->edid.ha * (dp->edid.va-4) * 4; |
| printk(BIOS_SPEW, "ha=%d, va=%d\n",dp->edid.ha, dp->edid.va); |
| |
| test_gfx(dp); |
| |
| set_vbe_mode_info_valid(&dp->edid, (uintptr_t)dp->graphics); |
| i915_init_done = 1; |
| return i915_init_done; |
| |
| fail: |
| printk(BIOS_SPEW, "Graphics could not be started;"); |
| printk(BIOS_SPEW, "Returning.\n"); |
| return 0; |
| } |