| # SPDX-License-Identifier: GPL-2.0-or-later |
| |
| chip soc/intel/broadwell |
| chip cpu/intel/haswell |
| device cpu_cluster 0 on ops broadwell_cpu_bus_ops end |
| end |
| device domain 0 on |
| ops broadwell_pci_domain_ops |
| subsystemid 0x103c 0x225a inherit |
| |
| device pci 00.0 on end # Broadwell Host bridge |
| device pci 02.0 on # Internal graphics VGA controller |
| register "gfx" = "GMA_STATIC_DISPLAYS(0)" |
| register "gpu_dp_b_hotplug" = "4" |
| register "gpu_dp_c_hotplug" = "4" |
| register "panel_cfg" = "{ |
| .up_delay_ms = 200, |
| .down_delay_ms = 50, |
| .cycle_delay_ms = 500, |
| .backlight_on_delay_ms = 1, |
| .backlight_off_delay_ms = 1, |
| .backlight_pwm_hz = 200, |
| }" |
| end |
| device pci 03.0 on end # Mini-HD audio |
| |
| chip soc/intel/broadwell/pch # Wildcat Point PCH |
| device pci 13.0 off end # Smart Sound Audio DSP |
| device pci 14.0 on end # xHCI Controller |
| device pci 15.0 off end # Serial I/O DMA |
| device pci 15.1 off end # I2C0 |
| device pci 15.2 off end # I2C1 |
| device pci 15.3 off end # GSPI0 |
| device pci 15.4 off end # GSPI1 |
| device pci 15.5 off end # UART0 |
| device pci 15.6 off end # UART1 |
| device pci 16.0 on end # Management Engine Interface 1 |
| device pci 16.1 off end # Management Engine Interface 2 |
| device pci 16.2 off end # Management Engine IDE-R |
| device pci 16.3 off end # Management Engine KT |
| device pci 17.0 off end # SDIO |
| device pci 19.0 on end # Intel Gigabit Ethernet |
| device pci 1b.0 on end # High Definition Audio |
| device pci 1c.0 on end # PCIe Port #1 |
| device pci 1c.1 on end # PCIe Port #2, Card Reader |
| device pci 1c.2 off end # PCIe Port #3 |
| device pci 1c.3 on # PCIe Port #4, WLAN |
| smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther" |
| "M.2/E 2230" "SlotDataBusWidth1X" |
| end |
| device pci 1c.4 off end # PCIe Port #5 |
| device pci 1c.5 on # PCIe Port #6, PCIe SSD |
| smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" |
| "M.2/M 2242/2260" "SlotDataBusWidth2X" |
| end |
| device pci 1d.0 on end # USB2 EHCI #1 |
| device pci 1f.0 on # LPC bridge |
| register "gen1_dec" = "0x007c0201" |
| register "gen2_dec" = "0x000c0101" |
| register "gen4_dec" = "0x000402e9" |
| register "gpe0_en_1" = "0x40" |
| register "gpe0_en_2" = "0x600" |
| register "gpe0_en_4" = "0x46" |
| chip drivers/pc80/tpm |
| device pnp 0c31.0 on end |
| end |
| # This laptop uses MEC1324, but it has the same interface |
| # as the KBC1126 laptops |
| chip ec/hp/kbc1126 |
| register "ec_data_port" = "0x62" |
| register "ec_cmd_port" = "0x66" |
| register "ec_ctrl_reg" = "0x81" |
| register "ec_fan_ctrl_value" = "0x6b" |
| device pnp ff.1 off end |
| end |
| end |
| device pci 1f.2 on # SATA Controller (AHCI) |
| register "sata_port1_gen3_dtle" = "0x2" |
| register "sata_port1_gen3_tx" = "0x80" |
| register "sata_port3_gen3_dtle" = "0x4" |
| register "sata_port3_gen3_tx" = "0x80" |
| # SATA (1), M.2 (3) |
| register "sata_port_map" = "0xa" |
| end |
| device pci 1f.3 on end # SMBus |
| device pci 1f.6 off end # Thermal |
| end |
| end |
| end |