| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #ifndef MAINBOARD_HDA_VERB_H |
| #define MAINBOARD_HDA_VERB_H |
| |
| #include <device/azalia_device.h> |
| |
| const u32 cim_verb_data[] = { |
| /* coreboot specific header */ |
| 0x10ec0236, // Codec Vendor / Device ID: Realtek ALC236 |
| 0x103C8C60, // Subsystem ID |
| 0x00000013, // Number of jacks (NID entries) |
| |
| AZALIA_RESET(0x1), |
| /* NID 0x01, HDA Codec Subsystem ID Verb table */ |
| AZALIA_SUBVENDOR(0, 0x103C8C60), |
| |
| /* Pin Widget Verb Table */ |
| |
| /* |
| * DMIC |
| * Requirement is to use PCH DMIC. Hence, |
| * commented out codec's Internal DMIC. |
| * AZALIA_PIN_CFG(0, 0x12, 0x90A60130), |
| * AZALIA_PIN_CFG(0, 0x13, 0x40000000), |
| */ |
| |
| /* Pin widget 0x14 - Front (Port-D) */ |
| AZALIA_PIN_CFG(0, 0x14, 0x90170110), |
| /* Pin widget 0x18 - NPC */ |
| AZALIA_PIN_CFG(0, 0x18, 0x411111F0), |
| /* Pin widget 0x19 - MIC2 (Port-F) */ |
| AZALIA_PIN_CFG(0, 0x19, 0x03A11020), |
| /* Pin widget 0x1A - LINE1 (Port-C) */ |
| AZALIA_PIN_CFG(0, 0x1a, 0x411111F0), |
| /* Pin widget 0x1B - NPC */ |
| AZALIA_PIN_CFG(0, 0x1b, 0x411111F0), |
| /* Pin widget 0x1D - BEEP-IN */ |
| AZALIA_PIN_CFG(0, 0x1d, 0x40600001), |
| /* Pin widget 0x1E - NPC */ |
| AZALIA_PIN_CFG(0, 0x1e, 0x411111F0), |
| /* Pin widget 0x21 - HP1-OUT (Port-I) */ |
| AZALIA_PIN_CFG(0, 0x21, 0x03211040), |
| |
| /* |
| * ;Pin widget 0x19 - MIC2 (Port-F) |
| */ |
| 0x01971C20, |
| 0x01971D10, |
| 0x01971EA1, |
| 0x01971F03, |
| /* |
| * Pin widget 0x21 - HP1-OUT (Port-I) |
| */ |
| 0x02171C40, |
| 0x02171D10, |
| 0x02171E21, |
| 0x02171F03, |
| /* |
| * Widget node 0x20 - 1 |
| * Codec hidden reset and speaker power 2W/4ohm |
| */ |
| 0x0205003C, |
| 0x02040354, |
| 0x0205003C, |
| 0x02040314, |
| /* |
| * Widget node 0x20 - 2 |
| * Class D power on Reset |
| */ |
| 0x0205001B, |
| 0x02040A4B, |
| 0x0205000B, |
| 0x02047778, |
| /* |
| * Widget node 0x20 - 3 |
| * Disable AGC and set AGC limit to -1.5dB |
| */ |
| 0x02050046, |
| 0x02040004, |
| 0x05750003, |
| 0x057409A3, |
| /* |
| * Widget node 0x20 - 4 |
| * Set AGC Post gain +1.5dB then Enable AGC |
| */ |
| 0x02050013, |
| 0x02044023, |
| 0x02050016, |
| 0x02040E50, |
| /* |
| * Widget node 0x20 - 5 |
| * Silence detector enabling + Set EAPD to verb control |
| */ |
| 0x02050037, |
| 0x0204FE15, |
| 0x02050010, |
| 0x02040020, |
| /* |
| * Widget node 0x20 - 6 |
| * Silence data mode Threshold (-90dB) |
| */ |
| 0x02050030, |
| 0x0204A000, |
| 0x0205001B, |
| 0x02040A4B, |
| /* |
| * Widget node 0x20 - 7 |
| * Default setting - 1 |
| */ |
| 0x05750003, |
| 0x05740DA3, |
| 0x02050046, |
| 0x02040004, |
| /* |
| * Widget node 0x20 - 8 |
| * support 1 pin detect two port |
| */ |
| 0x02050009, |
| 0x0204E003, |
| 0x0205000A, |
| 0x02047770, |
| /* |
| * Widget node 0x20 - 9 |
| * To set LDO1/LDO2 as default (used for headset) |
| */ |
| 0x02050008, |
| 0x0204EA0C, |
| 0x02050008, |
| 0x0204EA0C, |
| }; |
| |
| const u32 pc_beep_verbs[] = { |
| /* Dos beep path - 1 */ |
| 0x01470C00, |
| 0x02050036, |
| 0x02047151, |
| 0x01470740, |
| /* Dos beep path - 2 */ |
| 0x0143b000, |
| 0x01470C02, |
| 0x01470C02, |
| 0x01470C02, |
| }; |
| |
| AZALIA_ARRAY_SIZES; |
| |
| #endif |