intel/dcp847ske: Add Intel NUC DCP847SKE
https://ark.intel.com/products/71620/Intel-NUC-Board-DCP847SKE
Created using autoport and manual edits.
mainboard_fill_pei_data copied and adjusted from samsung/lumpy.
Tested:
- RAM slots with 2x4GB Kingston KVR1333D3S9/4G (DDR3-1333 1.5V).
- RAM slots with 2x4GB Kingston KVR16LS11/4G (DDR3L-1600 1.35V).
- SeaBIOS stable payload.
- Linux 4.13.14 payload.
- Booting into Linux 4.13.14 with Debian/unstable installed on the
internal mSATA slot.
- Non-native raminit (works).
- Native raminit
- KVR1333D3S9 doesn't work.
- KVR16LS11 only works at 1.5V.
- Native VGA init, HDMI port detection with libgfxinit.
- Basic ACPI functions (power button event; power-off; reboot).
- Suspend to RAM and resume works.
- PCIe WLAN in half-minicard slot.
- USB device in half-minicard slot.
- PCIe device in full-minicard slot.
- mSATA device in full-minicard slot.
- Fan spins up/down in response to CPU load.
Known issues:
- Native raminit fails timC calibration with the RAM I have.
- Technical Product Specification mentions overcurrent protection
for back panel and front panel USB connectors, but I haven't
been able to trigger it with either native fw or coreboot
(tried up to 2.5A load).
Untested:
- USB debug port.
Change-Id: I6e210310f55c051eaf61e0698fed855eda5d7d90
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/22683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
diff --git a/src/mainboard/intel/dcp847ske/usb.h b/src/mainboard/intel/dcp847ske/usb.h
new file mode 100644
index 0000000..c6a5295
--- /dev/null
+++ b/src/mainboard/intel/dcp847ske/usb.h
@@ -0,0 +1,35 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Tobias Diedrich <ranma+coreboot@tdiedrich.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef DCP847SKE_USB_H
+#define DPC847SKE_USB_H
+
+USB_CONFIG(1, 1, 0), /* back, towards HDMI plugs */
+USB_CONFIG(1, 1, 0), /* back, towards power plug */
+USB_CONFIG(1, 1, 1), /* half-width miniPCIe */
+USB_CONFIG(1, 1, 1), /* full-width miniPCIe */
+USB_CONFIG(1, 1, 2), /* front-panel header */
+USB_CONFIG(1, 1, 2), /* front-panel header */
+USB_CONFIG(1, 1, 3), /* front connector */
+USB_CONFIG(0, 1, 3), /* not available */
+USB_CONFIG(0, 1, 4), /* not available */
+USB_CONFIG(0, 1, 4), /* not available */
+USB_CONFIG(0, 1, 5), /* not available */
+USB_CONFIG(0, 1, 5), /* not available */
+USB_CONFIG(0, 1, 6), /* not available */
+USB_CONFIG(0, 1, 6), /* not available */
+
+#endif