| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <string.h> |
| #include <assert.h> |
| #include <console/console.h> |
| #include <delay.h> |
| #include <timer.h> |
| #include <symbols.h> |
| #include <device/mmio.h> |
| #include <soc/i2c.h> |
| #include <soc/i2c_common.h> |
| #include <device/i2c_simple.h> |
| |
| const struct i2c_spec_values standard_mode_spec = { |
| .min_low_ns = 4700 + I2C_STANDARD_MODE_BUFFER, |
| .min_su_sta_ns = 4700 + I2C_STANDARD_MODE_BUFFER, |
| .max_hd_dat_ns = 3450 - I2C_STANDARD_MODE_BUFFER, |
| .min_su_dat_ns = 250 + I2C_STANDARD_MODE_BUFFER, |
| }; |
| |
| const struct i2c_spec_values fast_mode_spec = { |
| .min_low_ns = 1300 + I2C_FAST_MODE_BUFFER, |
| .min_su_sta_ns = 600 + I2C_FAST_MODE_BUFFER, |
| .max_hd_dat_ns = 900 - I2C_FAST_MODE_BUFFER, |
| .min_su_dat_ns = 100 + I2C_FAST_MODE_BUFFER, |
| }; |
| |
| const struct i2c_spec_values fast_mode_plus_spec = { |
| .min_low_ns = 500 + I2C_FAST_MODE_PLUS_BUFFER, |
| .min_su_sta_ns = 260 + I2C_FAST_MODE_PLUS_BUFFER, |
| .max_hd_dat_ns = 400 - I2C_FAST_MODE_PLUS_BUFFER, |
| .min_su_dat_ns = 50 + I2C_FAST_MODE_PLUS_BUFFER, |
| }; |
| |
| __weak void mtk_i2c_dump_more_info(struct mt_i2c_regs *regs) |
| { |
| /* do nothing */ |
| } |
| |
| __weak void mtk_i2c_config_timing(struct mt_i2c_regs *regs, struct mtk_i2c *bus_ctrl) |
| { |
| /* do nothing */ |
| } |
| |
| const struct i2c_spec_values *mtk_i2c_get_spec(uint32_t speed) |
| { |
| if (speed <= I2C_SPEED_STANDARD) |
| return &standard_mode_spec; |
| else if (speed <= I2C_SPEED_FAST) |
| return &fast_mode_spec; |
| else |
| return &fast_mode_plus_spec; |
| } |
| |
| static inline void i2c_hw_reset(uint8_t bus) |
| { |
| struct mt_i2c_regs *regs; |
| struct mt_i2c_dma_regs *dma_regs; |
| |
| regs = mtk_i2c_bus_controller[bus].i2c_regs; |
| dma_regs = mtk_i2c_bus_controller[bus].i2c_dma_regs; |
| |
| if (mtk_i2c_bus_controller[bus].mt_i2c_flag == I2C_APDMA_ASYNC) { |
| write32(&dma_regs->dma_rst, I2C_DMA_WARM_RST); |
| udelay(10); |
| write32(&dma_regs->dma_rst, I2C_DMA_CLR_FLAG); |
| udelay(10); |
| write32(&dma_regs->dma_rst, |
| I2C_DMA_HARD_RST | I2C_DMA_HANDSHAKE_RST); |
| write32(®s->softreset, I2C_SOFT_RST | I2C_HANDSHAKE_RST); |
| udelay(10); |
| write32(&dma_regs->dma_rst, I2C_DMA_CLR_FLAG); |
| write32(®s->softreset, I2C_CLR_FLAG); |
| } else { |
| write32(®s->softreset, I2C_SOFT_RST); |
| write32(&dma_regs->dma_rst, I2C_DMA_WARM_RST); |
| udelay(50); |
| write32(&dma_regs->dma_rst, I2C_DMA_HARD_RST); |
| udelay(50); |
| write32(&dma_regs->dma_rst, I2C_DMA_CLR_FLAG); |
| udelay(50); |
| } |
| } |
| |
| static inline void mtk_i2c_dump_info(struct mt_i2c_regs *regs) |
| { |
| printk(BIOS_DEBUG, "I2C register:\nSLAVE_ADDR %x\nINTR_MASK %x\n" |
| "INTR_STAT %x\nCONTROL %x\nTRANSFER_LEN %x\nTRANSAC_LEN %x\n" |
| "DELAY_LEN %x\nTIMING %x\nSTART %x\nFIFO_STAT %x\nIO_CONFIG %x\n" |
| "HS %x\nDEBUGSTAT %x\nEXT_CONF %x\n", |
| read32(®s->slave_addr), |
| read32(®s->intr_mask), |
| read32(®s->intr_stat), |
| read32(®s->control), |
| read32(®s->transfer_len), |
| read32(®s->transac_len), |
| read32(®s->delay_len), |
| read32(®s->timing), |
| read32(®s->start), |
| read32(®s->fifo_stat), |
| read32(®s->io_config), |
| read32(®s->hs), |
| read32(®s->debug_stat), |
| read32(®s->ext_conf)); |
| |
| mtk_i2c_dump_more_info(regs); |
| } |
| |
| static int mtk_i2c_transfer(uint8_t bus, struct i2c_msg *seg, |
| enum i2c_modes mode) |
| { |
| int ret = I2C_OK; |
| uint16_t status; |
| uint16_t dma_sync = 0; |
| uint32_t time_out_val = 0; |
| uint8_t addr; |
| uint32_t write_len = 0; |
| uint32_t read_len = 0; |
| uint8_t *write_buffer = NULL; |
| uint8_t *read_buffer = NULL; |
| struct mt_i2c_regs *regs; |
| struct mt_i2c_dma_regs *dma_regs; |
| struct stopwatch sw; |
| |
| regs = mtk_i2c_bus_controller[bus].i2c_regs; |
| dma_regs = mtk_i2c_bus_controller[bus].i2c_dma_regs; |
| |
| addr = seg[0].slave; |
| |
| if (mtk_i2c_bus_controller[bus].mt_i2c_flag == I2C_APDMA_ASYNC) { |
| dma_sync = I2C_DMA_SKIP_CONFIG | I2C_DMA_ASYNC_MODE; |
| if (mode == I2C_WRITE_READ_MODE) |
| dma_sync |= I2C_DMA_DIR_CHANGE; |
| } |
| |
| switch (mode) { |
| case I2C_WRITE_MODE: |
| assert(seg[0].len > 0 && seg[0].len <= 255); |
| write_len = seg[0].len; |
| write_buffer = seg[0].buf; |
| break; |
| |
| case I2C_READ_MODE: |
| assert(seg[0].len > 0 && seg[0].len <= 255); |
| read_len = seg[0].len; |
| read_buffer = seg[0].buf; |
| break; |
| |
| /* Must use special write-then-read mode for repeated starts. */ |
| case I2C_WRITE_READ_MODE: |
| assert(seg[0].len > 0 && seg[0].len <= 255); |
| assert(seg[1].len > 0 && seg[1].len <= 255); |
| write_len = seg[0].len; |
| read_len = seg[1].len; |
| write_buffer = seg[0].buf; |
| read_buffer = seg[1].buf; |
| break; |
| } |
| |
| /* Clear interrupt status */ |
| write32(®s->intr_stat, I2C_TRANSAC_COMP | I2C_ACKERR | |
| I2C_HS_NACKERR); |
| |
| write32(®s->fifo_addr_clr, 0x1); |
| |
| /* Enable interrupt */ |
| write32(®s->intr_mask, I2C_HS_NACKERR | I2C_ACKERR | |
| I2C_TRANSAC_COMP); |
| |
| switch (mode) { |
| case I2C_WRITE_MODE: |
| memcpy(_dma_coherent, write_buffer, write_len); |
| |
| /* control registers */ |
| write32(®s->control, ASYNC_MODE | DMAACK_EN | |
| ACK_ERR_DET_EN | DMA_EN | CLK_EXT | |
| REPEATED_START_FLAG); |
| |
| /* Set transfer and transaction len */ |
| write32(®s->transac_len, 1); |
| write32(®s->transfer_len, write_len); |
| |
| /* set i2c write slave address*/ |
| write32(®s->slave_addr, addr << 1); |
| |
| /* Prepare buffer data to start transfer */ |
| write32(&dma_regs->dma_con, I2C_DMA_CON_TX | dma_sync); |
| write32(&dma_regs->dma_tx_mem_addr, (uintptr_t)_dma_coherent); |
| write32(&dma_regs->dma_tx_len, write_len); |
| break; |
| |
| case I2C_READ_MODE: |
| /* control registers */ |
| write32(®s->control, ASYNC_MODE | DMAACK_EN | |
| ACK_ERR_DET_EN | DMA_EN | CLK_EXT | |
| REPEATED_START_FLAG); |
| |
| /* Set transfer and transaction len */ |
| write32(®s->transac_len, 1); |
| write32(®s->transfer_len, read_len); |
| |
| /* set i2c read slave address*/ |
| write32(®s->slave_addr, (addr << 1 | 0x1)); |
| |
| /* Prepare buffer data to start transfer */ |
| write32(&dma_regs->dma_con, I2C_DMA_CON_RX | dma_sync); |
| write32(&dma_regs->dma_rx_mem_addr, (uintptr_t)_dma_coherent); |
| write32(&dma_regs->dma_rx_len, read_len); |
| break; |
| |
| case I2C_WRITE_READ_MODE: |
| memcpy(_dma_coherent, write_buffer, write_len); |
| |
| /* control registers */ |
| write32(®s->control, ASYNC_MODE | DMAACK_EN | |
| DIR_CHG | ACK_ERR_DET_EN | DMA_EN | |
| CLK_EXT | REPEATED_START_FLAG); |
| |
| /* Set transfer and transaction len */ |
| write32(®s->transfer_len, write_len); |
| write32(®s->transfer_aux_len, read_len); |
| write32(®s->transac_len, 2); |
| |
| /* set i2c write slave address*/ |
| write32(®s->slave_addr, addr << 1); |
| |
| /* Prepare buffer data to start transfer */ |
| write32(&dma_regs->dma_con, I2C_DMA_CLR_FLAG | dma_sync); |
| write32(&dma_regs->dma_tx_mem_addr, (uintptr_t)_dma_coherent); |
| write32(&dma_regs->dma_tx_len, write_len); |
| write32(&dma_regs->dma_rx_mem_addr, (uintptr_t)_dma_coherent); |
| write32(&dma_regs->dma_rx_len, read_len); |
| break; |
| } |
| |
| write32(&dma_regs->dma_int_flag, I2C_DMA_CLR_FLAG); |
| write32(&dma_regs->dma_en, I2C_DMA_START_EN); |
| |
| /* start transfer transaction */ |
| write32(®s->start, 0x1); |
| |
| stopwatch_init_usecs_expire(&sw, CONFIG_I2C_TRANSFER_TIMEOUT_US); |
| |
| /* polling mode : see if transaction complete */ |
| while (1) { |
| status = read32(®s->intr_stat); |
| if (status & I2C_HS_NACKERR) { |
| ret = I2C_TRANSFER_FAIL_HS_NACKERR; |
| printk(BIOS_ERR, "[i2c%d] transfer NACK error\n", bus); |
| mtk_i2c_dump_info(regs); |
| break; |
| } else if (status & I2C_ACKERR) { |
| ret = I2C_TRANSFER_FAIL_ACKERR; |
| printk(BIOS_ERR, "[i2c%d] transfer ACK error\n", bus); |
| mtk_i2c_dump_info(regs); |
| break; |
| } else if (status & I2C_TRANSAC_COMP) { |
| ret = I2C_OK; |
| memcpy(read_buffer, _dma_coherent, read_len); |
| break; |
| } |
| |
| if (stopwatch_expired(&sw)) { |
| ret = I2C_TRANSFER_FAIL_TIMEOUT; |
| printk(BIOS_ERR, "[i2c%d] transfer timeout:%d\n", bus, |
| time_out_val); |
| mtk_i2c_dump_info(regs); |
| break; |
| } |
| } |
| |
| write32(®s->intr_stat, I2C_TRANSAC_COMP | I2C_ACKERR | |
| I2C_HS_NACKERR); |
| |
| /* clear bit mask */ |
| write32(®s->intr_mask, I2C_HS_NACKERR | I2C_ACKERR | |
| I2C_TRANSAC_COMP); |
| |
| /* reset the i2c controller for next i2c transfer. */ |
| i2c_hw_reset(bus); |
| |
| return ret; |
| } |
| |
| static bool mtk_i2c_should_combine(struct i2c_msg *seg, int left_count) |
| { |
| return (left_count >= 2 && |
| !(seg[0].flags & I2C_M_RD) && |
| (seg[1].flags & I2C_M_RD) && |
| seg[0].slave == seg[1].slave); |
| } |
| |
| static int mtk_i2c_max_step_cnt(uint32_t target_speed) |
| { |
| if (target_speed > I2C_SPEED_FAST_PLUS) |
| return MAX_HS_STEP_CNT_DIV; |
| else |
| return MAX_STEP_CNT_DIV; |
| } |
| |
| int platform_i2c_transfer(unsigned int bus, struct i2c_msg *segments, |
| int seg_count) |
| { |
| int ret; |
| int i; |
| int mode; |
| |
| for (i = 0; i < seg_count; i++) { |
| if (mtk_i2c_should_combine(&segments[i], seg_count - i)) { |
| mode = I2C_WRITE_READ_MODE; |
| } else { |
| mode = (segments[i].flags & I2C_M_RD) ? |
| I2C_READ_MODE : I2C_WRITE_MODE; |
| } |
| |
| ret = mtk_i2c_transfer(bus, &segments[i], mode); |
| if (ret < 0) |
| return ret; |
| |
| if (mode == I2C_WRITE_READ_MODE) |
| i++; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Check and calculate i2c ac-timing. |
| * |
| * Hardware design: |
| * sample_ns = (1000000000 * (sample_cnt + 1)) / clk_src |
| * xxx_cnt_div = spec->min_xxx_ns / sample_ns |
| * |
| * The calculation of sample_ns is rounded down; |
| * otherwise xxx_cnt_div would be greater than the smallest spec. |
| * The sda_timing is chosen as the middle value between |
| * the largest and smallest. |
| */ |
| int mtk_i2c_check_ac_timing(uint8_t bus, uint32_t clk_src, |
| uint32_t check_speed, |
| uint32_t step_cnt, |
| uint32_t sample_cnt) |
| { |
| const struct i2c_spec_values *spec; |
| uint32_t su_sta_cnt, low_cnt, high_cnt, max_step_cnt; |
| uint32_t sda_max, sda_min, clk_ns, max_sta_cnt = 0x100; |
| uint32_t sample_ns = ((uint64_t)NSECS_PER_SEC * (sample_cnt + 1)) / clk_src; |
| struct mtk_i2c_ac_timing *ac_timing; |
| |
| spec = mtk_i2c_get_spec(check_speed); |
| |
| clk_ns = NSECS_PER_SEC / clk_src; |
| |
| su_sta_cnt = DIV_ROUND_UP(spec->min_su_sta_ns, clk_ns); |
| if (su_sta_cnt > max_sta_cnt) |
| return -1; |
| |
| low_cnt = DIV_ROUND_UP(spec->min_low_ns, sample_ns); |
| max_step_cnt = mtk_i2c_max_step_cnt(check_speed); |
| if (2 * step_cnt > low_cnt && low_cnt < max_step_cnt) { |
| if (low_cnt > step_cnt) { |
| high_cnt = 2 * step_cnt - low_cnt; |
| } else { |
| high_cnt = step_cnt; |
| low_cnt = step_cnt; |
| } |
| } else { |
| return -2; |
| } |
| |
| sda_max = spec->max_hd_dat_ns / sample_ns; |
| if (sda_max > low_cnt) |
| sda_max = 0; |
| |
| sda_min = DIV_ROUND_UP(spec->min_su_dat_ns, sample_ns); |
| if (sda_min < low_cnt) |
| sda_min = 0; |
| |
| if (sda_min > sda_max) |
| return -3; |
| |
| ac_timing = &mtk_i2c_bus_controller[bus].ac_timing; |
| if (check_speed > I2C_SPEED_FAST_PLUS) { |
| ac_timing->hs = I2C_TIME_DEFAULT_VALUE | (sample_cnt << 12) | (high_cnt << 8); |
| ac_timing->ltiming &= ~GENMASK(15, 9); |
| ac_timing->ltiming |= (sample_cnt << 12) | (low_cnt << 9); |
| ac_timing->ext &= ~GENMASK(7, 1); |
| ac_timing->ext |= (su_sta_cnt << 1) | (1 << 0); |
| } else { |
| ac_timing->htiming = (sample_cnt << 8) | (high_cnt); |
| ac_timing->ltiming = (sample_cnt << 6) | (low_cnt); |
| ac_timing->ext = (su_sta_cnt << 8) | (1 << 0); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Calculate i2c port speed. |
| * |
| * Hardware design: |
| * i2c_bus_freq = parent_clk / (clock_div * 2 * sample_cnt * step_cnt) |
| * clock_div: fixed in hardware, but may be various in different SoCs |
| * |
| * To calculate sample_cnt and step_cnt, we pick the highest bus frequency |
| * that is still no larger than i2c->speed_hz. |
| */ |
| int mtk_i2c_calculate_speed(uint8_t bus, uint32_t clk_src, |
| uint32_t target_speed, |
| uint32_t *timing_step_cnt, |
| uint32_t *timing_sample_cnt) |
| { |
| uint32_t step_cnt; |
| uint32_t sample_cnt; |
| uint32_t max_step_cnt; |
| uint32_t base_sample_cnt = MAX_SAMPLE_CNT_DIV; |
| uint32_t base_step_cnt; |
| uint32_t opt_div; |
| uint32_t best_mul; |
| uint32_t cnt_mul; |
| uint32_t clk_div = mtk_i2c_bus_controller[bus].ac_timing.inter_clk_div; |
| int32_t clock_div_constraint = 0; |
| int success = 0; |
| |
| if (target_speed > I2C_SPEED_HIGH) |
| target_speed = I2C_SPEED_HIGH; |
| |
| max_step_cnt = mtk_i2c_max_step_cnt(target_speed); |
| base_step_cnt = max_step_cnt; |
| |
| /* Find the best combination */ |
| opt_div = DIV_ROUND_UP(clk_src >> 1, target_speed); |
| best_mul = MAX_SAMPLE_CNT_DIV * max_step_cnt; |
| |
| /* Search for the best pair (sample_cnt, step_cnt) with |
| * 0 < sample_cnt < MAX_SAMPLE_CNT_DIV |
| * 0 < step_cnt < max_step_cnt |
| * sample_cnt * step_cnt >= opt_div |
| * optimizing for sample_cnt * step_cnt being minimal |
| */ |
| for (sample_cnt = 1; sample_cnt <= MAX_SAMPLE_CNT_DIV; sample_cnt++) { |
| if (sample_cnt == 1) { |
| if (clk_div != 0) |
| clock_div_constraint = 1; |
| else |
| clock_div_constraint = 0; |
| } else { |
| if (clk_div > 1) |
| clock_div_constraint = 1; |
| else if (clk_div == 0) |
| clock_div_constraint = -1; |
| else |
| clock_div_constraint = 0; |
| } |
| |
| step_cnt = DIV_ROUND_UP(opt_div + clock_div_constraint, sample_cnt); |
| if (step_cnt > max_step_cnt) |
| continue; |
| |
| cnt_mul = step_cnt * sample_cnt; |
| if (cnt_mul >= best_mul) |
| continue; |
| |
| if (mtk_i2c_check_ac_timing(bus, clk_src, |
| target_speed, step_cnt - 1, |
| sample_cnt - 1)) |
| continue; |
| |
| success = 1; |
| best_mul = cnt_mul; |
| base_sample_cnt = sample_cnt; |
| base_step_cnt = step_cnt; |
| if (best_mul == opt_div + clock_div_constraint) |
| break; |
| |
| } |
| |
| if (!success) |
| return -1; |
| |
| sample_cnt = base_sample_cnt; |
| step_cnt = base_step_cnt; |
| |
| if (clk_src / (2 * (sample_cnt * step_cnt - clock_div_constraint)) > |
| target_speed) |
| return -1; |
| |
| *timing_step_cnt = step_cnt - 1; |
| *timing_sample_cnt = sample_cnt - 1; |
| |
| return 0; |
| } |
| |
| void mtk_i2c_speed_init(uint8_t bus, uint32_t speed) |
| { |
| uint32_t max_clk_div = MAX_CLOCK_DIV; |
| uint32_t clk_src, clk_div, step_cnt, sample_cnt; |
| uint32_t l_step_cnt, l_sample_cnt; |
| struct mtk_i2c *bus_ctrl; |
| |
| if (bus >= I2C_BUS_NUMBER) { |
| printk(BIOS_ERR, "%s, error bus num:%d\n", __func__, bus); |
| return; |
| } |
| |
| bus_ctrl = &mtk_i2c_bus_controller[bus]; |
| |
| for (clk_div = 1; clk_div <= max_clk_div; clk_div++) { |
| clk_src = I2C_CLK_HZ / clk_div; |
| bus_ctrl->ac_timing.inter_clk_div = clk_div - 1; |
| |
| if (speed > I2C_SPEED_FAST_PLUS) { |
| /* Set master code speed register */ |
| if (mtk_i2c_calculate_speed(bus, clk_src, I2C_SPEED_FAST, |
| &l_step_cnt, &l_sample_cnt)) |
| continue; |
| |
| /* Set the high speed mode register */ |
| if (mtk_i2c_calculate_speed(bus, clk_src, speed, |
| &step_cnt, &sample_cnt)) |
| continue; |
| |
| bus_ctrl->ac_timing.inter_clk_div = (clk_div - 1) << 8 | (clk_div - 1); |
| } else { |
| if (mtk_i2c_calculate_speed(bus, clk_src, speed, |
| &l_step_cnt, &l_sample_cnt)) |
| continue; |
| |
| /* Disable the high speed transaction */ |
| bus_ctrl->ac_timing.hs = I2C_TIME_CLR_VALUE; |
| } |
| |
| break; |
| } |
| |
| if (clk_div > max_clk_div) { |
| printk(BIOS_ERR, "%s, cannot support %d hz on i2c-%d\n", __func__, speed, bus); |
| return; |
| } |
| |
| /* Init i2c bus timing register. */ |
| mtk_i2c_config_timing(bus_ctrl->i2c_regs, bus_ctrl); |
| } |