| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <baseboard/variants.h> |
| #include <bootstate.h> |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci_def.h> |
| #include <device/pci_ops.h> |
| #include <device/pci_ids.h> |
| #include <hwilib.h> |
| #include <i210.h> |
| #include <soc/gpio.h> |
| #include <string.h> |
| #include <timer.h> |
| #include <timestamp.h> |
| |
| #define MAX_PATH_DEPTH 12 |
| #define MAX_NUM_MAPPINGS 10 |
| |
| /** \brief This function can decide if a given MAC address is valid or not. |
| * Currently, addresses filled with 0xff or 0x00 are not valid. |
| * @param mac Buffer to the MAC address to check |
| * @return 0 if address is not valid, otherwise 1 |
| */ |
| static uint8_t is_mac_adr_valid(uint8_t mac[MAC_ADDR_LEN]) |
| { |
| for (size_t i = 0; i < MAC_ADDR_LEN; i++) { |
| if (mac[i] != 0x00 && mac[i] != 0xff) |
| return 1; |
| if (mac[i] != mac[0]) |
| return 1; |
| } |
| return 0; |
| } |
| |
| /** \brief This function will search for a MAC address which can be assigned |
| * to a MACPHY. |
| * @param dev pointer to PCI device |
| * @param mac buffer where to store the MAC address |
| * @return cb_err CB_ERR or CB_SUCCESS |
| */ |
| enum cb_err mainboard_get_mac_address(struct device *dev, uint8_t mac[MAC_ADDR_LEN]) |
| { |
| struct bus *parent = dev->bus; |
| uint8_t buf[16], mapping[16], i = 0, chain_len = 0; |
| |
| memset(buf, 0, sizeof(buf)); |
| memset(mapping, 0, sizeof(mapping)); |
| |
| /* The first entry in the tree is the device itself. */ |
| buf[0] = dev->path.pci.devfn; |
| chain_len = 1; |
| for (i = 1; i < MAX_PATH_DEPTH && parent->dev->bus->subordinate; i++) { |
| buf[i] = parent->dev->path.pci.devfn; |
| chain_len++; |
| parent = parent->dev->bus; |
| } |
| if (i == MAX_PATH_DEPTH) { |
| /* The path is deeper than MAX_PATH_DEPTH devices, error. */ |
| printk(BIOS_ERR, "Too many bridges for %s\n", dev_path(dev)); |
| return CB_ERR; |
| } |
| /* |
| * Now construct the mapping based on the device chain starting from |
| * root bridge device to the device itself. |
| */ |
| mapping[0] = 1; |
| mapping[1] = chain_len; |
| for (i = 0; i < chain_len; i++) |
| mapping[i + 4] = buf[chain_len - i - 1]; |
| |
| /* Open main hwinfo block */ |
| if (hwilib_find_blocks("hwinfo.hex") != CB_SUCCESS) |
| return CB_ERR; |
| /* Now try to find a valid MAC address in hwinfo for this mapping. */ |
| for (i = 0; i < MAX_NUM_MAPPINGS; i++) { |
| if (hwilib_get_field(XMac1Mapping + i, buf, 16) != 16) |
| continue; |
| if (memcmp(buf, mapping, chain_len + 4)) |
| continue; |
| /* There is a matching mapping available, get MAC address. */ |
| if (hwilib_get_field(XMac1 + i, mac, MAC_ADDR_LEN) == MAC_ADDR_LEN) { |
| if (is_mac_adr_valid(mac)) |
| return CB_SUCCESS; |
| } |
| return CB_ERR; |
| } |
| /* No MAC address found for */ |
| return CB_ERR; |
| } |
| |
| static void wait_for_legacy_dev(void *unused) |
| { |
| uint32_t legacy_delay, us_since_boot; |
| struct stopwatch sw; |
| |
| /* Open main hwinfo block. */ |
| if (hwilib_find_blocks("hwinfo.hex") != CB_SUCCESS) |
| return; |
| |
| /* Get legacy delay parameter from hwinfo. */ |
| if (hwilib_get_field(LegacyDelay, (uint8_t *) &legacy_delay, |
| sizeof(legacy_delay)) != sizeof(legacy_delay)) |
| return; |
| |
| us_since_boot = get_us_since_boot(); |
| /* No need to wait if the time since boot is already long enough.*/ |
| if (us_since_boot > legacy_delay) |
| return; |
| stopwatch_init_msecs_expire(&sw, (legacy_delay - us_since_boot) / 1000); |
| printk(BIOS_NOTICE, "Wait remaining %d of %d us for legacy devices...", |
| legacy_delay - us_since_boot, legacy_delay); |
| stopwatch_wait_until_expired(&sw); |
| printk(BIOS_NOTICE, "done!\n"); |
| } |
| |
| static void mainboard_init(void *chip_info) |
| { |
| const struct pad_config *pads; |
| size_t num; |
| |
| pads = variant_gpio_table(&num); |
| gpio_configure_pads(pads, num); |
| } |
| |
| static void mainboard_final(void *chip_info) |
| { |
| struct device *dev; |
| |
| if (CONFIG(PCI_ALLOW_BUS_MASTER_ANY_DEVICE)) { |
| /* Set Master Enable for on-board PCI devices if allowed. */ |
| dev = dev_find_device(PCI_VENDOR_ID_SIEMENS, 0x403e, 0); |
| if (dev) |
| pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER); |
| |
| dev = dev_find_device(PCI_VENDOR_ID_SIEMENS, 0x403f, 0); |
| if (dev) |
| pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER); |
| } |
| } |
| |
| struct chip_operations mainboard_ops = { |
| .init = mainboard_init, |
| .final = mainboard_final |
| }; |
| |
| BOOT_STATE_INIT_ENTRY(BS_DEV_ENUMERATE, BS_ON_ENTRY, wait_for_legacy_dev, NULL); |