| # SPDX-License-Identifier: GPL-2.0-or-later |
| |
| chip soc/amd/cezanne |
| device domain 0 on |
| |
| end # domain |
| |
| register "slow_ppt_limit_mW" = "25000" |
| register "fast_ppt_limit_mW" = "30000" |
| register "slow_ppt_time_constant_s" = "5" |
| register "stapm_time_constant_s" = "275" |
| register "sustained_power_limit_mW" = "15000" |
| register "thermctl_limit_degreeC" = "100" |
| |
| #Update values based on final stardust SDLE test report. |
| register "telemetry_vddcrvddfull_scale_current_mA" = "95359" #mA |
| register "telemetry_vddcrvddoffset" = "449" |
| register "telemetry_vddcrsocfull_scale_current_mA" = "31481" #mA |
| register "telemetry_vddcrsocoffset" = "193" |
| |
| #USB 2.0 phy config |
| register "usb_phy" = "{ |
| /* Left USB C0 Port */ |
| .Usb2PhyPort[0] = { |
| .compdstune = 3, |
| .sqrxtune = 3, |
| .txfslstune = 3, |
| .txpreempamptune = 3, |
| .txpreemppulsetune = 0, |
| .txrisetune = 1, |
| .txvreftune = 6, |
| .txhsxvtune = 3, |
| .txrestune = 1, |
| }, |
| /* Left USB A0 Port */ |
| .Usb2PhyPort[1] = { |
| .compdstune = 3, |
| .sqrxtune = 3, |
| .txfslstune = 3, |
| .txpreempamptune = 3, |
| .txpreemppulsetune = 0, |
| .txrisetune = 1, |
| .txvreftune = 6, |
| .txhsxvtune = 3, |
| .txrestune = 1, |
| }, |
| /* Right USB C1 Port */ |
| .Usb2PhyPort[4] = { |
| .compdstune = 3, |
| .sqrxtune = 3, |
| .txfslstune = 3, |
| .txpreempamptune = 3, |
| .txpreemppulsetune = 0, |
| .txrisetune = 1, |
| .txvreftune = 6, |
| .txhsxvtune = 3, |
| .txrestune = 1, |
| }, |
| }" |
| |
| # general purpose PCIe clock output configuration |
| register "gpp_clk_config[1]" = "GPP_CLK_OFF" |
| register "gpp_clk_config[2]" = "GPP_CLK_OFF" |
| |
| # I2C Config |
| #+-------------------+---------------------------+ |
| #| Field | Value | |
| #+-------------------+---------------------------+ |
| #| I2C0 | Trackpad | |
| #| I2C1 | Touchscreen | |
| #| I2C2 | Speaker, Codec, P-SAR | |
| #| I2C3 | H1/D2 TPM | |
| #+-------------------+---------------------------+ |
| register "i2c[0]" = "{ |
| .speed = I2C_SPEED_FAST, |
| }" |
| |
| register "i2c[1]" = "{ |
| .speed = I2C_SPEED_FAST, |
| }" |
| |
| register "i2c[2]" = "{ |
| .speed = I2C_SPEED_FAST, |
| }" |
| |
| register "i2c[3]" = "{ |
| .speed = I2C_SPEED_FAST, |
| .early_init = true, |
| }" |
| |
| device ref i2c_0 on |
| chip drivers/i2c/generic |
| register "hid" = ""ELAN0000"" |
| register "desc" = ""ELAN Touchpad"" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)" |
| register "wake" = "GEVENT_22" |
| register "probed" = "1" |
| device i2c 15 on end |
| end |
| chip drivers/i2c/hid |
| register "generic.hid" = ""PNP0C50"" |
| register "generic.desc" = ""Synaptics Touchpad"" |
| register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_9)" |
| register "generic.wake" = "GEVENT_22" |
| register "generic.probed" = "1" |
| register "hid_desc_reg_offset" = "0x20" |
| device i2c 2c on end |
| end |
| end # I2C0 |
| device ref i2c_1 on |
| chip drivers/i2c/hid |
| register "generic.hid" = ""ELAN6918"" |
| register "generic.desc" = ""ELAN Touchscreen"" |
| register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_89)" |
| register "generic.probed" = "1" |
| register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_121)" |
| register "generic.reset_delay_ms" = "20" |
| register "generic.reset_off_delay_ms" = "2" |
| register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPIO_120)" |
| register "generic.stop_off_delay_ms" = "2" |
| register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_68)" |
| register "generic.enable_delay_ms" = "1" |
| register "generic.has_power_resource" = "1" |
| register "generic.disable_gpio_export_in_crs" = "1" |
| register "hid_desc_reg_offset" = "0x01" |
| device i2c 10 on end |
| end |
| end # I2C1 |
| device ref i2c_2 on |
| chip drivers/i2c/generic |
| register "hid" = ""10EC5682"" |
| register "name" = ""RT58"" |
| register "desc" = ""Realtek RT5682"" |
| register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPIO_90)" |
| register "property_count" = "1" |
| register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" |
| register "property_list[0].name" = ""realtek,jd-src"" |
| register "property_list[0].integer" = "1" |
| device i2c 1a on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""10EC1019"" |
| register "desc" = ""Realtek SPK AMP R"" |
| register "uid" = "0" |
| device i2c 29 on end |
| end |
| chip drivers/i2c/generic |
| register "hid" = ""10EC1019"" |
| register "desc" = ""Realtek SPK AMP L"" |
| register "uid" = "1" |
| device i2c 2a on end |
| end |
| end # I2C2 |
| end # chip soc/amd/cezanne |