Falco/Slippy: Patch to refactor haswell/gma.c and mainboard/google/slippy/i915io.c
A large portion of documented registers have been initialized using macros. Only a few
undocumented registers are left out. i915io.c looks lot more cleaner by removing redundant
calls. However, some more work is required to correctly identify which calls are not required.
All the io_writes are replaced by gtt_writes.
Change-Id: I077a235652c7d5eb90346cd6e15cc48b5161e969
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://gerrit.chromium.org/gerrit/66204
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Tested-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 39f3289f68b527575b0a120960ff67f78415815e)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6600
Tested-by: build bot (Jenkins)
diff --git a/src/northbridge/intel/haswell/gma.c b/src/northbridge/intel/haswell/gma.c
index ee447bfc..9dfba9a 100644
--- a/src/northbridge/intel/haswell/gma.c
+++ b/src/northbridge/intel/haswell/gma.c
@@ -25,7 +25,9 @@
#include <device/pci.h>
#include <device/pci_ids.h>
#include <drivers/intel/gma/i915_reg.h>
+#include <drivers/intel/gma/i915.h>
#include <cpu/intel/haswell/haswell.h>
+#include <stdlib.h>
#include "chip.h"
#include "haswell.h"
@@ -126,12 +128,12 @@
static struct resource *gtt_res = NULL;
-static inline u32 gtt_read(u32 reg)
+u32 gtt_read(u32 reg)
{
return read32(gtt_res->base + reg);
}
-static inline void gtt_write(u32 reg, u32 data)
+void gtt_write(u32 reg, u32 data)
{
write32(gtt_res->base + reg, data);
}
@@ -209,7 +211,10 @@
gtt_poll(0x138124, (1 << 31), (0 << 31));
/* Enable PM Interrupts */
- gtt_write(0x4402c, 0x03000076);
+ gtt_write(GEN6_PMIER, GEN6_PM_MBOX_EVENT | GEN6_PM_THERMAL_EVENT |
+ GEN6_PM_RP_DOWN_TIMEOUT | GEN6_PM_RP_UP_THRESHOLD |
+ GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_UP_EI_EXPIRED |
+ GEN6_PM_RP_DOWN_EI_EXPIRED);
/* Enable RC6 in idle */
gtt_write(0x0a094, 0x00040000);
@@ -218,6 +223,26 @@
gtt_write_regs(haswell_gt_lock);
}
+static void init_display_planes(void)
+{
+ int pipe, plane;
+
+ /* Disable cursor mode */
+ for (pipe = PIPE_A; pipe <= PIPE_C; pipe++) {
+ gtt_write(CURCNTR_IVB(pipe), CURSOR_MODE_DISABLE);
+ gtt_write(CURBASE_IVB(pipe), 0x00000000);
+ }
+
+ /* Disable primary plane and set surface base address*/
+ for (plane = PLANE_A; plane <= PLANE_C; plane++) {
+ gtt_write(DSPCNTR(plane), DISPLAY_PLANE_DISABLE);
+ gtt_write(DSPSURF(plane), 0x00000000);
+ }
+
+ /* Disable VGA display */
+ gtt_write(CPU_VGACNTRL, CPU_VGA_DISABLE);
+}
+
static void gma_setup_panel(struct device *dev)
{
struct northbridge_intel_haswell_config *conf = dev->chip_info;
@@ -226,122 +251,90 @@
printk(BIOS_DEBUG, "GT Power Management Init (post VBIOS)\n");
/* Setup Digital Port Hotplug */
- reg32 = gtt_read(0xc4030);
+ reg32 = gtt_read(PCH_PORT_HOTPLUG);
if (!reg32) {
reg32 = (conf->gpu_dp_b_hotplug & 0x7) << 2;
reg32 |= (conf->gpu_dp_c_hotplug & 0x7) << 10;
reg32 |= (conf->gpu_dp_d_hotplug & 0x7) << 18;
- gtt_write(0xc4030, reg32);
+ gtt_write(PCH_PORT_HOTPLUG, reg32);
}
/* Setup Panel Power On Delays */
- reg32 = gtt_read(0xc7208);
+ reg32 = gtt_read(PCH_PP_ON_DELAYS);
if (!reg32) {
reg32 = (conf->gpu_panel_port_select & 0x3) << 30;
reg32 |= (conf->gpu_panel_power_up_delay & 0x1fff) << 16;
reg32 |= (conf->gpu_panel_power_backlight_on_delay & 0x1fff);
- gtt_write(0xc7208, reg32);
+ gtt_write(PCH_PP_ON_DELAYS, reg32);
}
/* Setup Panel Power Off Delays */
- reg32 = gtt_read(0xc720c);
+ reg32 = gtt_read(PCH_PP_OFF_DELAYS);
if (!reg32) {
reg32 = (conf->gpu_panel_power_down_delay & 0x1fff) << 16;
reg32 |= (conf->gpu_panel_power_backlight_off_delay & 0x1fff);
- gtt_write(0xc720c, reg32);
+ gtt_write(PCH_PP_OFF_DELAYS, reg32);
}
/* Setup Panel Power Cycle Delay */
if (conf->gpu_panel_power_cycle_delay) {
- reg32 = gtt_read(0xc7210);
+ reg32 = gtt_read(PCH_PP_DIVISOR);
reg32 &= ~0xff;
reg32 |= conf->gpu_panel_power_cycle_delay & 0xff;
- gtt_write(0xc7210, reg32);
+ gtt_write(PCH_PP_DIVISOR, reg32);
}
/* Enable Backlight if needed */
if (conf->gpu_cpu_backlight) {
- gtt_write(0x48250, (1 << 31));
- gtt_write(0x48254, conf->gpu_cpu_backlight);
+ gtt_write(BLC_PWM_CPU_CTL2, BLC_PWM2_ENABLE);
+ gtt_write(BLC_PWM_CPU_CTL, conf->gpu_cpu_backlight);
}
if (conf->gpu_pch_backlight) {
- gtt_write(0xc8250, (1 << 31));
- gtt_write(0xc8254, conf->gpu_pch_backlight);
+ gtt_write(BLC_PWM_PCH_CTL1, BLM_PCH_PWM_ENABLE);
+ gtt_write(BLC_PWM_PCH_CTL2, conf->gpu_pch_backlight);
}
/* Get display,pipeline,and DDI registers into a basic sane state */
- /* not all these have documented names. */
- gtt_write(0x45400, 0x80000000);
- gtt_poll( 0x00045400, 0xc0000000, 0xc0000000);
- gtt_write(_CURACNTR, 0x00000000);
- gtt_write(_DSPACNTR, (/* DISPPLANE_SEL_PIPE(0=A,1=B) */0x0<<24)|0x00000000);
- gtt_write(_DSPBCNTR, 0x00000000);
- gtt_write(CPU_VGACNTRL, 0x8000298e);
- gtt_write(_DSPASIZE+0xc, 0x00000000);
- gtt_write(_DSPBSURF, 0x00000000);
- gtt_write(0x4f008, 0x00000000);
- gtt_write(0x4f008, 0x00000000);
- gtt_write(0x4f008, 0x00000000);
- gtt_write(0x4f040, 0x01000001);
- gtt_write(0x4f044, 0x00000000);
- gtt_write(0x4f048, 0x00000000);
- gtt_write(0x4f04c, 0x03030000);
- gtt_write(0x4f050, 0x00000000);
- gtt_write(0x4f054, 0x00000001);
- gtt_write(0x4f058, 0x00000000);
- gtt_write(0x4f04c, 0x03450000);
- gtt_write(0x4f04c, 0x45450000);
- gtt_write(0x4f000, 0x03000400);
- gtt_write(DP_A, 0x00000091); /* DDI-A enable */
+ power_well_enable();
+
+ init_display_planes();
+
+ /* DDI-A params set:
+ bit 0: Display detected (RO)
+ bit 4: DDI A supports 4 lanes and DDI E is not used
+ bit 7: DDI buffer is idle
+ */
+ gtt_write(DDI_BUF_CTL_A, DDI_BUF_IS_IDLE | DDI_A_4_LANES | DDI_INIT_DISPLAY_DETECTED);
+
+ /* Set FDI registers - is this required? */
gtt_write(_FDI_RXA_MISC, 0x00200090);
gtt_write(_FDI_RXA_MISC, 0x0a000000);
- gtt_write(0x46408, 0x00000070);
+
+ /* Enable the handshake with PCH display when processing reset */
+ gtt_write(NDE_RSTWRN_OPT, RST_PCH_HNDSHK_EN);
+
+ /* undocumented */
gtt_write(0x42090, 0x04000000);
- gtt_write(0x4f050, 0xc0000000);
gtt_write(0x9840, 0x00000000);
gtt_write(0x42090, 0xa4000000);
- gtt_write(SOUTH_DSPCLK_GATE_D, 0x00001000);
+
+ gtt_write(SOUTH_DSPCLK_GATE_D, PCH_LP_PARTITION_LEVEL_DISABLE);
+
+ /* undocumented */
gtt_write(0x42080, 0x00004000);
- gtt_write(0x64f80, 0x00ffffff);
- gtt_write(0x64f84, 0x0007000e);
- gtt_write(0x64f88, 0x00d75fff);
- gtt_write(0x64f8c, 0x000f000a);
- gtt_write(0x64f90, 0x00c30fff);
- gtt_write(0x64f94, 0x00060006);
- gtt_write(0x64f98, 0x00aaafff);
- gtt_write(0x64f9c, 0x001e0000);
- gtt_write(0x64fa0, 0x00ffffff);
- gtt_write(0x64fa4, 0x000f000a);
- gtt_write(0x64fa8, 0x00d75fff);
- gtt_write(0x64fac, 0x00160004);
- gtt_write(0x64fb0, 0x00c30fff);
- gtt_write(0x64fb4, 0x001e0000);
- gtt_write(0x64fb8, 0x00ffffff);
- gtt_write(0x64fbc, 0x00060006);
- gtt_write(0x64fc0, 0x00d75fff);
- gtt_write(0x64fc4, 0x001e0000);
- gtt_write(DDI_BUF_TRANS_A, 0x00ffffff);
- gtt_write(DDI_BUF_TRANS_A+0x4, 0x0006000e);
- gtt_write(DDI_BUF_TRANS_A+0x8, 0x00d75fff);
- gtt_write(DDI_BUF_TRANS_A+0xc, 0x0005000a);
- gtt_write(DDI_BUF_TRANS_A+0x10, 0x00c30fff);
- gtt_write(DDI_BUF_TRANS_A+0x14, 0x00040006);
- gtt_write(DDI_BUF_TRANS_A+0x18, 0x80aaafff);
- gtt_write(DDI_BUF_TRANS_A+0x1c, 0x000b0000);
- gtt_write(DDI_BUF_TRANS_A+0x20, 0x00ffffff);
- gtt_write(DDI_BUF_TRANS_A+0x24, 0x0005000a);
- gtt_write(DDI_BUF_TRANS_A+0x28, 0x00d75fff);
- gtt_write(DDI_BUF_TRANS_A+0x2c, 0x000c0004);
- gtt_write(DDI_BUF_TRANS_A+0x30, 0x80c30fff);
- gtt_write(DDI_BUF_TRANS_A+0x34, 0x000b0000);
- gtt_write(DDI_BUF_TRANS_A+0x38, 0x00ffffff);
- gtt_write(DDI_BUF_TRANS_A+0x3c, 0x00040006);
- gtt_write(DDI_BUF_TRANS_A+0x40, 0x80d75fff);
- gtt_write(DDI_BUF_TRANS_A+0x44, 0x000b0000);
- gtt_write(DIGITAL_PORT_HOTPLUG_CNTRL,
- DIGITAL_PORTA_HOTPLUG_ENABLE |0x00000010);
- gtt_write(SDEISR+0x30,
- PORTD_HOTPLUG_ENABLE | PORTB_HOTPLUG_ENABLE |0x10100010);
+
+ /* Prepare DDI buffers for DP and FDI */
+ intel_prepare_ddi();
+
+ /* Hot plug detect buffer enabled for port A */
+ gtt_write(DIGITAL_PORT_HOTPLUG_CNTRL, DIGITAL_PORTA_HOTPLUG_ENABLE);
+
+ /* Enable HPD buffer for digital port D and B */
+ gtt_write(PCH_PORT_HOTPLUG, PORTD_HOTPLUG_ENABLE | PORTB_HOTPLUG_ENABLE);
+
+ /* Bits 4:0 - Power cycle delay (default 0x6 --> 500ms)
+ Bits 31:8 - Reference divider (0x0004af ----> 24MHz)
+ */
gtt_write(PCH_PP_DIVISOR, 0x0004af06);
}
@@ -406,19 +399,16 @@
#if CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT
printk(BIOS_SPEW, "NATIVE graphics, run native enable\n");
- u32 iobase, mmiobase, physbase;
+ u32 mmiobase, physbase;
/* Default set to 1 since it might be required for
stuff like seabios */
unsigned int init_fb = 1;
- iobase = dev->resource_list[2].base;
mmiobase = dev->resource_list[0].base;
physbase = pci_read_config32(dev, 0x5c) & ~0xf;
#ifdef CONFIG_CHROMEOS
init_fb = developer_mode_enabled() || recovery_mode_enabled();
#endif
- int i915lightup(unsigned int physbase, unsigned int iobase, unsigned int mmio,
- unsigned int gfx, unsigned int init_fb);
- lightup_ok = i915lightup(physbase, iobase, mmiobase, graphics_base, init_fb);
+ lightup_ok = i915lightup(physbase, mmiobase, graphics_base, init_fb);
if (lightup_ok)
gfx_set_init_done(1);
#endif