| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2007-2008 coresystems GmbH |
| * Copyright (C) 2009 Thomas Jourdan <thomas.jourdan@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; version 2 of |
| * the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| */ |
| |
| #include <delay.h> |
| #include <stdint.h> |
| #include <arch/io.h> |
| #include <device/pci_def.h> |
| #include <device/pnp_def.h> |
| #include <cpu/x86/lapic.h> |
| #include <pc80/mc146818rtc.h> |
| #include <console/console.h> |
| #include <cpu/x86/bist.h> |
| #include <cpu/intel/speedstep.h> |
| #include "southbridge/intel/i3100/early_smbus.c" |
| #include "southbridge/intel/i3100/early_lpc.c" |
| #include "southbridge/intel/i3100/reset.c" |
| #include <superio/intel/i3100/i3100.h> |
| #include <superio/smsc/smscsuperio/smscsuperio.h> |
| #include <northbridge/intel/i3100/i3100.h> |
| #include <southbridge/intel/i3100/i3100.h> |
| #include "lib/debug.c" // XXX |
| |
| #define DEVPRES_CONFIG (DEVPRES_D1F0 | DEVPRES_D2F0 | DEVPRES_D3F0) |
| #define DEVPRES1_CONFIG (DEVPRES1_D0F1 | DEVPRES1_D8F0) |
| |
| #define RCBA_RPC 0x0224 /* 32 bit */ |
| |
| #define RCBA_TCTL 0x3000 /* 8 bit */ |
| |
| #define RCBA_D31IP 0x3100 /* 32 bit */ |
| #define RCBA_D30IP 0x3104 /* 32 bit */ |
| #define RCBA_D29IP 0x3108 /* 32 bit */ |
| #define RCBA_D28IP 0x310C /* 32 bit */ |
| #define RCBA_D31IR 0x3140 /* 16 bit */ |
| #define RCBA_D30IR 0x3142 /* 16 bit */ |
| #define RCBA_D29IR 0x3144 /* 16 bit */ |
| #define RCBA_D28IR 0x3146 /* 16 bit */ |
| |
| #define RCBA_RTC 0x3400 /* 32 bit */ |
| #define RCBA_HPTC 0x3404 /* 32 bit */ |
| #define RCBA_GCS 0x3410 /* 32 bit */ |
| #define RCBA_BUC 0x3414 /* 8 bit */ |
| #define RCBA_FD 0x3418 /* 32 bit */ |
| #define RCBA_PRC 0x341C /* 32 bit */ |
| |
| static inline int spd_read_byte(u16 device, u8 address) |
| { |
| return smbus_read_byte(device, address); |
| } |
| |
| #include <northbridge/intel/i3100/raminit.h> |
| #include "northbridge/intel/i3100/memory_initialized.c" |
| #include "northbridge/intel/i3100/raminit.c" |
| #include "lib/generic_sdram.c" |
| #include "northbridge/intel/i3100/reset_test.c" |
| #include <spd.h> |
| |
| #define SERIAL_DEV PNP_DEV(0x4e, I3100_SP1) |
| |
| static void early_config(void) |
| { |
| u32 gcs, rpc, fd; |
| |
| /* Enable RCBA */ |
| pci_write_config32(PCI_DEV(0, 0x1F, 0), RCBA, DEFAULT_RCBA | 1); |
| |
| /* Disable watchdog */ |
| gcs = read32(DEFAULT_RCBA + RCBA_GCS); |
| gcs |= (1 << 5); /* No reset */ |
| write32(DEFAULT_RCBA + RCBA_GCS, gcs); |
| |
| /* Configure PCIe port B as 4x */ |
| rpc = read32(DEFAULT_RCBA + RCBA_RPC); |
| rpc |= (3 << 0); |
| write32(DEFAULT_RCBA + RCBA_RPC, rpc); |
| |
| /* Disable Modem, Audio, PCIe ports 2/3/4 */ |
| fd = read32(DEFAULT_RCBA + RCBA_FD); |
| fd |= (1 << 19) | (1 << 18) | (1 << 17) | (1 << 6) | (1 << 5); |
| write32(DEFAULT_RCBA + RCBA_FD, fd); |
| |
| /* Enable HPET */ |
| write32(DEFAULT_RCBA + RCBA_HPTC, (1 << 7)); |
| |
| /* Improve interrupt routing |
| * D31:F2 SATA INTB# -> PIRQD |
| * D31:F3 SMBUS INTB# -> PIRQD |
| * D31:F4 CHAP INTD# -> PIRQA |
| * D29:F0 USB1#1 INTA# -> PIRQH |
| * D29:F1 USB1#2 INTB# -> PIRQD |
| * D29:F7 USB2 INTA# -> PIRQH |
| * D28:F0 PCIe Port 1 INTA# -> PIRQE |
| */ |
| |
| write16(DEFAULT_RCBA + RCBA_D31IR, 0x0230); |
| write16(DEFAULT_RCBA + RCBA_D30IR, 0x3210); |
| write16(DEFAULT_RCBA + RCBA_D29IR, 0x3237); |
| write16(DEFAULT_RCBA + RCBA_D28IR, 0x3214); |
| |
| /* Setup sata mode */ |
| pci_write_config8(PCI_DEV(0, 0x1F, 2), SATA_MAP, (SATA_MODE_AHCI << 6) | (0 << 0)); |
| } |
| |
| #include <cpu/intel/romstage.h> |
| void main(unsigned long bist) |
| { |
| /* int boot_mode = 0; */ |
| |
| static const struct mem_controller mch[] = { |
| { |
| .node_id = 0, |
| .f0 = PCI_DEV(0, 0x00, 0), |
| .f1 = PCI_DEV(0, 0x00, 1), |
| .f2 = PCI_DEV(0, 0x00, 2), |
| .f3 = PCI_DEV(0, 0x00, 3), |
| .channel0 = { DIMM3, DIMM2, DIMM1, DIMM0 }, |
| .channel1 = { DIMM7, DIMM6, DIMM5, DIMM4 }, |
| } |
| }; |
| |
| if (bist == 0) |
| enable_lapic(); |
| |
| /* Setup the console */ |
| i3100_enable_superio(); |
| i3100_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); |
| i3100_configure_uart_clk(SERIAL_DEV, I3100_UART_CLK_PREDIVIDE_26); |
| |
| console_init(); |
| |
| /* Halt if there was a built in self test failure */ |
| report_bist_failure(bist); |
| |
| /* Perform early board specific init */ |
| early_config(); |
| |
| /* Prevent the TCO timer from rebooting us */ |
| i3100_halt_tco_timer(); |
| |
| /* Enable SPD ROMs and DDR-II DRAM */ |
| enable_smbus(); |
| |
| /* Enable SpeedStep and automatic thermal throttling */ |
| { |
| msr_t msr; |
| u16 perf; |
| |
| msr = rdmsr(IA32_MISC_ENABLES); |
| msr.lo |= (1 << 3) | (1 << 16); |
| wrmsr(IA32_MISC_ENABLES, msr); |
| |
| /* Set CPU frequency/voltage to maximum */ |
| |
| /* Read performance status register and keep |
| * bits 47:32, where BUS_RATIO_MAX and VID_MAX |
| * are encoded |
| */ |
| msr = rdmsr(IA32_PERF_STS); |
| perf = msr.hi & 0x0000ffff; |
| |
| /* Write VID_MAX & BUS_RATIO_MAX to |
| * performance control register |
| */ |
| msr = rdmsr(IA32_PERF_CTL); |
| msr.lo &= 0xffff0000; |
| msr.lo |= perf; |
| wrmsr(IA32_PERF_CTL, msr); |
| } |
| |
| /* Initialize memory */ |
| sdram_initialize(ARRAY_SIZE(mch), mch); |
| } |