| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2013 Damien Zammit <damien@zamaudio.com> |
| * Copyright (C) 2014 Edward O'Callaghan <eocallaghan@alterapraxis.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <arch/io.h> |
| #include <device/pnp.h> |
| #include <stdint.h> |
| #include "ite.h" |
| |
| /* Global configuration registers. */ |
| #define ITE_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */ |
| #define ITE_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ |
| #define ITE_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */ |
| #define ITE_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */ |
| #define ITE_CONFIG_REG_MFC 0x2a /* multi function pin */ |
| #define ITE_CONFIG_REG_WATCHDOG 0x72 /* watchdog config */ |
| |
| /* Helper procedure */ |
| static void ite_sio_write(pnp_devfn_t dev, u8 reg, u8 value) |
| { |
| pnp_set_logical_device(dev); |
| pnp_write_config(dev, reg, value); |
| } |
| |
| /* Enable configuration */ |
| static void pnp_enter_conf_state(pnp_devfn_t dev) |
| { |
| u16 port = dev >> 8; |
| |
| outb(0x87, port); |
| outb(0x01, port); |
| outb(0x55, port); |
| outb((port == 0x4e) ? 0xaa : 0x55, port); |
| } |
| |
| /* Disable configuration */ |
| static void pnp_exit_conf_state(pnp_devfn_t dev) |
| { |
| ite_sio_write(dev, ITE_CONFIG_REG_CC, 0x02); |
| } |
| |
| void ite_reg_write(pnp_devfn_t dev, u8 reg, u8 value) |
| { |
| pnp_enter_conf_state(dev); |
| ite_sio_write(dev, reg, value); |
| pnp_exit_conf_state(dev); |
| } |
| |
| |
| /* |
| * in romstage.c |
| * #define CLKIN_DEV PNP_DEV(0x2e, ITE_GPIO) |
| * and pass: CLKIN_DEV |
| * ITE_UART_CLK_PREDIVIDE_24 |
| * ITE_UART_CLK_PREDIVIDE_48 (default) |
| */ |
| void ite_conf_clkin(pnp_devfn_t dev, u8 predivide) |
| { |
| ite_reg_write(dev, ITE_CONFIG_REG_CLOCKSEL, (0x1 & predivide)); |
| } |
| |
| /* Bring up early serial debugging output before the RAM is initialized. */ |
| void ite_enable_serial(pnp_devfn_t dev, u16 iobase) |
| { |
| pnp_enter_conf_state(dev); |
| pnp_set_logical_device(dev); |
| pnp_set_enable(dev, 0); |
| pnp_set_iobase(dev, PNP_IDX_IO0, iobase); |
| pnp_set_enable(dev, 1); |
| pnp_exit_conf_state(dev); |
| } |
| |
| /* |
| * |
| * LDN 7, reg 0x2a - needed for S3, or memory power will be cut off |
| * this was documented only in IT8712F_V0.9.2! |
| * |
| * Enable 3VSBSW#. (For System Suspend-to-RAM) |
| * 0: 3VSBSW# will be always inactive. |
| * 1: 3VSBSW# enabled. It will be (NOT SUSB#) NAND SUSC#. |
| * |
| * in romstage.c |
| * #define GPIO_DEV PNP_DEV(0x2e, ITE_GPIO) |
| * and pass: GPIO_DEV |
| */ |
| |
| void ite_enable_3vsbsw(pnp_devfn_t dev) |
| { |
| u8 tmp; |
| pnp_enter_conf_state(dev); |
| pnp_set_logical_device(dev); |
| tmp = pnp_read_config(dev, ITE_CONFIG_REG_MFC); |
| tmp |= 0x80; |
| pnp_write_config(dev, ITE_CONFIG_REG_MFC, tmp); |
| pnp_exit_conf_state(dev); |
| } |
| |
| /* |
| * in romstage.c |
| * #define GPIO_DEV PNP_DEV(0x2e, ITE_GPIO) |
| * and pass: GPIO_DEV |
| */ |
| |
| void ite_kill_watchdog(pnp_devfn_t dev) |
| { |
| pnp_enter_conf_state(dev); |
| ite_sio_write(dev, ITE_CONFIG_REG_WATCHDOG, 0x00); |
| pnp_exit_conf_state(dev); |
| } |