| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <stdint.h> |
| #include <string.h> |
| #include <arch/io.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include "pch.h" |
| #include "gpio.h" |
| |
| #define MAX_GPIO_NUMBER 75 /* zero based */ |
| |
| static u16 get_gpio_base(void) |
| { |
| #if defined(__PRE_RAM__) || defined(__SMM__) |
| return pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; |
| #else |
| return pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), |
| GPIO_BASE) & 0xfffc; |
| #endif |
| } |
| |
| void setup_pch_gpios(const struct pch_gpio_map *gpio) |
| { |
| u16 gpiobase = get_gpio_base(); |
| |
| /* GPIO Set 1 */ |
| if (gpio->set1.level) |
| outl(*((u32*)gpio->set1.level), gpiobase + GP_LVL); |
| if (gpio->set1.mode) |
| outl(*((u32*)gpio->set1.mode), gpiobase + GPIO_USE_SEL); |
| if (gpio->set1.direction) |
| outl(*((u32*)gpio->set1.direction), gpiobase + GP_IO_SEL); |
| if (gpio->set1.reset) |
| outl(*((u32*)gpio->set1.reset), gpiobase + GP_RST_SEL1); |
| if (gpio->set1.invert) |
| outl(*((u32*)gpio->set1.invert), gpiobase + GPI_INV); |
| if (gpio->set1.blink) |
| outl(*((u32*)gpio->set1.blink), gpiobase + GPO_BLINK); |
| |
| /* GPIO Set 2 */ |
| if (gpio->set2.level) |
| outl(*((u32*)gpio->set2.level), gpiobase + GP_LVL2); |
| if (gpio->set2.mode) |
| outl(*((u32*)gpio->set2.mode), gpiobase + GPIO_USE_SEL2); |
| if (gpio->set2.direction) |
| outl(*((u32*)gpio->set2.direction), gpiobase + GP_IO_SEL2); |
| if (gpio->set2.reset) |
| outl(*((u32*)gpio->set2.reset), gpiobase + GP_RST_SEL2); |
| |
| /* GPIO Set 3 */ |
| if (gpio->set3.level) |
| outl(*((u32*)gpio->set3.level), gpiobase + GP_LVL3); |
| if (gpio->set3.mode) |
| outl(*((u32*)gpio->set3.mode), gpiobase + GPIO_USE_SEL3); |
| if (gpio->set3.direction) |
| outl(*((u32*)gpio->set3.direction), gpiobase + GP_IO_SEL3); |
| if (gpio->set3.reset) |
| outl(*((u32*)gpio->set3.reset), gpiobase + GP_RST_SEL3); |
| } |
| |
| int get_gpio(int gpio_num) |
| { |
| static const int gpio_reg_offsets[] = {0xc, 0x38, 0x48}; |
| u16 gpio_base = get_gpio_base(); |
| int index, bit; |
| |
| if (gpio_num > MAX_GPIO_NUMBER) |
| return 0; /* Just ignore wrong gpio numbers. */ |
| |
| index = gpio_num / 32; |
| bit = gpio_num % 32; |
| |
| return (inl(gpio_base + gpio_reg_offsets[index]) >> bit) & 1; |
| } |
| |
| /* |
| * get a number comprised of multiple GPIO values. gpio_num_array points to |
| * the array of gpio pin numbers to scan, terminated by -1. |
| */ |
| unsigned get_gpios(const int *gpio_num_array) |
| { |
| int gpio; |
| unsigned bitmask = 1; |
| unsigned vector = 0; |
| |
| while (bitmask && |
| ((gpio = *gpio_num_array++) != -1)) { |
| if (get_gpio(gpio)) |
| vector |= bitmask; |
| bitmask <<= 1; |
| } |
| return vector; |
| } |
| |
| void set_gpio(int gpio_num, int value) |
| { |
| static const int gpio_reg_offsets[] = {0xc, 0x38, 0x48}; |
| u16 gpio_base = get_gpio_base(); |
| int index, bit; |
| u32 config; |
| |
| if (gpio_num > MAX_GPIO_NUMBER) |
| return; /* Just ignore wrong gpio numbers. */ |
| |
| index = gpio_num / 32; |
| bit = gpio_num % 32; |
| |
| config = inl(gpio_base + gpio_reg_offsets[index]); |
| config &= ~(1 << bit); |
| config |= value << bit; |
| outl(config, gpio_base + gpio_reg_offsets[index]); |
| } |
| |
| int gpio_is_native(int gpio_num) |
| { |
| static const int gpio_reg_offsets[] = { |
| GPIO_USE_SEL, GPIO_USE_SEL2, GPIO_USE_SEL3 |
| }; |
| u16 gpio_base = get_gpio_base(); |
| int index, bit; |
| u32 config; |
| |
| if (gpio_num > MAX_GPIO_NUMBER) |
| return 0; /* Just ignore wrong gpio numbers. */ |
| |
| index = gpio_num / 32; |
| bit = gpio_num % 32; |
| |
| config = inl(gpio_base + gpio_reg_offsets[index]); |
| return !(config & (1 << bit)); |
| } |