| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright 2014 Rockchip Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <arch/cache.h> |
| #include <arch/exception.h> |
| #include <arch/io.h> |
| #include <arch/stages.h> |
| #include <armv7.h> |
| #include <assert.h> |
| #include <cbfs.h> |
| #include <cbmem.h> |
| #include <console/console.h> |
| #include <delay.h> |
| #include <program_loading.h> |
| #include <soc/sdram.h> |
| #include <soc/clock.h> |
| #include <soc/pwm.h> |
| #include <soc/grf.h> |
| #include <soc/rk808.h> |
| #include <soc/tsadc.h> |
| #include <stdlib.h> |
| #include <symbols.h> |
| #include <timestamp.h> |
| #include <types.h> |
| #include <vendorcode/google/chromeos/chromeos.h> |
| |
| #include "board.h" |
| |
| static void regulate_vdd_log(unsigned int mv) |
| { |
| unsigned int duty_ns; |
| const u32 period_ns = 2000; /* pwm period: 2000ns */ |
| const u32 max_regulator_mv = 1350; /* 1.35V */ |
| const u32 min_regulator_mv = 870; /* 0.87V */ |
| |
| write32(&rk3288_grf->iomux_pwm1, IOMUX_PWM1); |
| |
| assert((mv >= min_regulator_mv) && (mv <= max_regulator_mv)); |
| |
| duty_ns = (max_regulator_mv - mv) * period_ns / |
| (max_regulator_mv - min_regulator_mv); |
| |
| pwm_init(1, period_ns, duty_ns); |
| } |
| |
| static void configure_l2ctlr(void) |
| { |
| uint32_t l2ctlr; |
| |
| l2ctlr = read_l2ctlr(); |
| l2ctlr &= 0xfffc0000; /* clear bit0~bit17 */ |
| |
| /* |
| * Data RAM write latency: 2 cycles |
| * Data RAM read latency: 2 cycles |
| * Data RAM setup latency: 1 cycle |
| * Tag RAM write latency: 1 cycle |
| * Tag RAM read latency: 1 cycle |
| * Tag RAM setup latency: 1 cycle |
| */ |
| l2ctlr |= (1 << 3 | 1 << 0); |
| write_l2ctlr(l2ctlr); |
| } |
| |
| static void sdmmc_power_off(void) |
| { |
| rk808_configure_ldo(4, 0); /* VCCIO_SD */ |
| rk808_configure_ldo(5, 0); /* VCC33_SD */ |
| } |
| |
| void main(void) |
| { |
| timestamp_add_now(TS_START_ROMSTAGE); |
| |
| console_init(); |
| configure_l2ctlr(); |
| tsadc_init(); |
| |
| /* Need to power cycle SD card to ensure it is properly reset. */ |
| sdmmc_power_off(); |
| |
| /* vdd_log 1200mv is enough for ddr run 666Mhz */ |
| regulate_vdd_log(1200); |
| |
| timestamp_add_now(TS_BEFORE_INITRAM); |
| |
| sdram_init(get_sdram_config()); |
| |
| timestamp_add_now(TS_AFTER_INITRAM); |
| |
| /* Now that DRAM is up, add mappings for it and DMA coherency buffer. */ |
| mmu_config_range((uintptr_t)_dram/MiB, |
| sdram_size_mb(), DCACHE_WRITEBACK); |
| mmu_config_range((uintptr_t)_dma_coherent/MiB, |
| _dma_coherent_size/MiB, DCACHE_OFF); |
| |
| cbmem_initialize_empty(); |
| |
| run_ramstage(); |
| } |