| # sample config for avalue/EAX-785E |
| chip northbridge/amd/amdfam10/root_complex |
| device cpu_cluster 0 on |
| chip cpu/amd/socket_AM3 #L1 and DDR3 |
| device lapic 0 on end |
| end |
| end |
| device domain 0 on |
| subsystemid 0x1612 0x3060 inherit #TODO: Set the correctly subsystem id. |
| chip northbridge/amd/amdfam10 |
| device pci 18.0 on # northbridge |
| chip southbridge/amd/rs780 |
| device pci 0.0 on end # HT 0x9600 |
| device pci 1.0 on end # Internal Graphics P2P bridge 0x9712 |
| device pci 2.0 on end # GFX_RX0-7/TX0-7 PCIEx16_1 slot |
| device pci 3.0 on end # GFX_RX8-15/TX8-15 PCIEx16_2 slot |
| device pci 4.0 on end # PortB GPP_RX/TX0 PCIEx1_1 slot |
| device pci 5.0 on end # PortC GPP_RX/TX1 PCIEx1_2 slot |
| device pci 6.0 on end # PortD GPP_RX/TX2 PCIEx1_3 slot |
| device pci 7.0 on end # PortE GPP_RX/TX3 PCIEx1_4 slot |
| device pci 8.0 off end # NB/SB Link P2P bridge |
| device pci 9.0 on end # Ethernet |
| device pci a.0 on end # Ethernet |
| register "gppsb_configuration" = "4" # Configuration E |
| register "gpp_configuration" = "3" # Configuration D |
| register "port_enable" = "0x6FE" |
| register "gfx_dev2_dev3" = "0" #no use |
| register "gfx_dual_slot" = "1" # 0 single slot, 1 dual slot |
| register "gfx_lane_reversal" = "0" |
| register "gfx_compliance" = "0" |
| register "gfx_reconfiguration" = "1" |
| register "gfx_link_width" = "0" |
| register "gfx_tmds" = "1" |
| register "gfx_pcie_config" = "4" # 2x8 GFX, one on Lanes 0-7, one on Lanes 8-15 |
| register "gfx_ddi_config" = "0" # no DDI_SL |
| end |
| chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pci bus |
| device pci 11.0 on end # SATA |
| device pci 12.0 on end # USB |
| device pci 12.2 on end # USB |
| device pci 13.0 on end # USB |
| device pci 13.2 on end # USB |
| device pci 14.0 on end # SM |
| device pci 14.1 on end # IDE 0x439c |
| device pci 14.2 on end # HDA 0x4383 |
| device pci 14.3 on |
| chip superio/winbond/w83627hf |
| device pnp 2e.0 off # Floppy |
| io 0x60 = 0x3f0 |
| irq 0x70 = 6 |
| drq 0x74 = 2 |
| end |
| device pnp 2e.1 off # Parallel Port |
| io 0x60 = 0x378 |
| irq 0x70 = 7 |
| end |
| device pnp 2e.2 on # Com1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 2e.3 on # Com2 |
| io 0x60 = 0x2f8 |
| irq 0x70 = 3 |
| end |
| device pnp 2e.5 on # PS/2 Keyboard & mouse |
| io 0x60 = 0x60 |
| io 0x62 = 0x64 |
| irq 0x70 = 1 |
| irq 0x72 = 12 |
| end |
| device pnp 2e.6 off # SFI |
| io 0x62 = 0x100 |
| end |
| device pnp 2e.7 off # GPIO_GAME_MIDI |
| io 0x60 = 0x220 |
| io 0x62 = 0x300 |
| irq 0x70 = 9 |
| end |
| device pnp 2e.8 off end # WDTO_PLED |
| device pnp 2e.9 off end # GPIO_SUSLED |
| device pnp 2e.a off end # ACPI |
| device pnp 2e.b on # HW Monitor |
| io 0x60 = 0x290 |
| irq 0x70 = 5 |
| end |
| end #superio/winbond/w83627hf |
| end # LPC 0x439d |
| device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} |
| device pci 14.5 on end # USB 2 |
| device pci 14.6 off end # Gec |
| device pci 15.0 off end # PCIe 0 |
| device pci 15.1 off end # PCIe 1 |
| device pci 15.2 off end # PCIe 2 |
| device pci 15.3 on end # PCIe 3 |
| device pci 16.0 on end # USB |
| device pci 16.2 on end # USB |
| #register "gpp_configuration" = "0" #4:0:0:0 |
| #register "gpp_configuration" = "2" #2:2:0:0 |
| #register "gpp_configuration" = "3" #2:1:1:0 |
| register "gpp_configuration" = "4" #1:1:1:1 |
| register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE |
| end #southbridge/amd/cimx/sb800 |
| end # device pci 18.0 |
| |
| device pci 18.1 on end |
| device pci 18.2 on end |
| device pci 18.3 on end |
| device pci 18.4 on end |
| end |
| end #domain |
| end |