| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2000, 2007 Ronald G. Minnich <rminnich@gmail.com> |
| * Copyright (C) 2005 Eswar Nallusamy, LANL |
| * Copyright (C) 2005 Tyan (written by Yinghai Lu for Tyan) |
| * Copyright (C) 2007-2010 coresystems GmbH |
| * Copyright (C) 2007 Carl-Daniel Hailfinger |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <cpu/x86/mtrr.h> |
| #include <cpu/x86/cache.h> |
| #include <cpu/x86/lapic_def.h> |
| #include <cpu/x86/post_code.h> |
| |
| #define CacheSize CONFIG_DCACHE_RAM_SIZE |
| #define CacheBase (0xd0000 - CacheSize) |
| |
| /* Save the BIST result. */ |
| movl %eax, %ebp |
| |
| CacheAsRam: |
| /* Check whether the processor has HT capability. */ |
| movl $01, %eax |
| cpuid |
| btl $28, %edx |
| jnc NotHtProcessor |
| bswapl %ebx |
| cmpb $01, %bh |
| jbe NotHtProcessor |
| |
| /* |
| * It is a HT processor. Send SIPI to the other logical processor |
| * within this processor so that the CAR related common system |
| * registers are programmed accordingly. |
| */ |
| |
| /* |
| * Use some register that is common to both logical processors |
| * as semaphore. Refer Appendix B, Vol.3. |
| */ |
| xorl %eax, %eax |
| xorl %edx, %edx |
| movl $MTRR_FIX_64K_00000, %ecx |
| wrmsr |
| |
| /* |
| * Figure out the logical AP's APIC ID; the following logic will |
| * work only for processors with 2 threads. |
| * Refer to Vol 3. Table 7-1 for details about this logic. |
| */ |
| movl $0xFEE00020, %esi |
| movl (%esi), %ebx |
| andl $0xFF000000, %ebx |
| bswapl %ebx |
| btl $0, %ebx |
| jnc LogicalAP0 |
| andb $0xFE, %bl |
| jmp Send_SIPI |
| LogicalAP0: |
| orb $0x01, %bl |
| Send_SIPI: |
| bswapl %ebx /* EBX - logical AP's APIC ID. */ |
| |
| /* |
| * Fill up the IPI command registers in the Local APIC mapped to |
| * default address and issue SIPI to the other logical processor |
| * within this processor die. |
| */ |
| Retry_SIPI: |
| movl %ebx, %eax |
| movl $0xFEE00310, %esi |
| movl %eax, (%esi) |
| |
| /* SIPI vector - F900:0000 */ |
| movl $0x000006F9, %eax |
| movl $0xFEE00300, %esi |
| movl %eax, (%esi) |
| |
| movl $0x30, %ecx |
| SIPI_Delay: |
| pause |
| decl %ecx |
| jnz SIPI_Delay |
| |
| movl (%esi), %eax |
| andl $0x00001000, %eax |
| jnz Retry_SIPI |
| |
| /* Wait for the Logical AP to complete initialization. */ |
| LogicalAP_SIPINotdone: |
| movl $MTRR_FIX_64K_00000, %ecx |
| rdmsr |
| orl %eax, %eax |
| jz LogicalAP_SIPINotdone |
| |
| NotHtProcessor: |
| /* Set the default memory type and enable fixed and variable MTRRs. */ |
| movl $MTRR_DEF_TYPE_MSR, %ecx |
| xorl %edx, %edx |
| movl $(MTRR_DEF_TYPE_EN | MTRR_DEF_TYPE_FIX_EN), %eax |
| wrmsr |
| |
| /* Clear all MTRRs. */ |
| xorl %edx, %edx |
| movl $all_mtrr_msrs, %esi |
| |
| clear_fixed_var_mtrr: |
| lodsl (%esi), %eax |
| testl %eax, %eax |
| jz clear_fixed_var_mtrr_out |
| |
| movl %eax, %ecx |
| xorl %eax, %eax |
| wrmsr |
| |
| jmp clear_fixed_var_mtrr |
| |
| all_mtrr_msrs: |
| /* fixed MTRR MSRs */ |
| .long MTRR_FIX_64K_00000 |
| .long MTRR_FIX_16K_80000 |
| .long MTRR_FIX_16K_A0000 |
| .long MTRR_FIX_4K_C0000 |
| .long MTRR_FIX_4K_C8000 |
| .long MTRR_FIX_4K_D0000 |
| .long MTRR_FIX_4K_D8000 |
| .long MTRR_FIX_4K_E0000 |
| .long MTRR_FIX_4K_E8000 |
| .long MTRR_FIX_4K_F0000 |
| .long MTRR_FIX_4K_F8000 |
| |
| /* var MTRR MSRs */ |
| .long MTRR_PHYS_BASE(0) |
| .long MTRR_PHYS_MASK(0) |
| .long MTRR_PHYS_BASE(1) |
| .long MTRR_PHYS_MASK(1) |
| .long MTRR_PHYS_BASE(2) |
| .long MTRR_PHYS_MASK(2) |
| .long MTRR_PHYS_BASE(3) |
| .long MTRR_PHYS_MASK(3) |
| .long MTRR_PHYS_BASE(4) |
| .long MTRR_PHYS_MASK(4) |
| .long MTRR_PHYS_BASE(5) |
| .long MTRR_PHYS_MASK(5) |
| .long MTRR_PHYS_BASE(6) |
| .long MTRR_PHYS_MASK(6) |
| .long MTRR_PHYS_BASE(7) |
| .long MTRR_PHYS_MASK(7) |
| |
| .long 0x000 /* NULL, end of table */ |
| |
| clear_fixed_var_mtrr_out: |
| |
| /* |
| * 0x06 is the WB IO type for a given 4k segment. |
| * segs is the number of 4k segments in the area of the particular |
| * register we want to use for CAR. |
| * reg is the register where the IO type should be stored. |
| */ |
| .macro extractmask segs, reg |
| .if \segs <= 0 |
| /* |
| * The xorl here is superfluous because at the point of first execution |
| * of this macro, %eax and %edx are cleared. Later invocations of this |
| * macro will have a monotonically increasing segs parameter. |
| */ |
| xorl \reg, \reg |
| .elseif \segs == 1 |
| movl $0x06000000, \reg /* WB IO type */ |
| .elseif \segs == 2 |
| movl $0x06060000, \reg /* WB IO type */ |
| .elseif \segs == 3 |
| movl $0x06060600, \reg /* WB IO type */ |
| .elseif \segs >= 4 |
| movl $0x06060606, \reg /* WB IO type */ |
| .endif |
| .endm |
| |
| /* |
| * carsize is the cache size in bytes we want to use for CAR. |
| * windowoffset is the 32k-aligned window into CAR size. |
| */ |
| .macro simplemask carsize, windowoffset |
| .set gas_bug_workaround,(((\carsize - \windowoffset) >> 12) - 4) |
| extractmask gas_bug_workaround, %eax |
| .set gas_bug_workaround,(((\carsize - \windowoffset) >> 12)) |
| extractmask gas_bug_workaround, %edx |
| /* |
| * Without the gas bug workaround, the entire macro would consist |
| * only of the two lines below: |
| * extractmask (((\carsize - \windowoffset) >> 12) - 4), %eax |
| * extractmask (((\carsize - \windowoffset) >> 12)), %edx |
| */ |
| .endm |
| |
| #if CacheSize > 0x10000 |
| #error Invalid CAR size, must be at most 64k. |
| #endif |
| #if CacheSize < 0x1000 |
| #error Invalid CAR size, must be at least 4k. This is a processor limitation. |
| #endif |
| #if (CacheSize & (0x1000 - 1)) |
| #error Invalid CAR size, is not a multiple of 4k. This is a processor limitation. |
| #endif |
| |
| #if CacheSize > 0x8000 |
| /* Enable caching for 32K-64K using fixed MTRR. */ |
| movl $MTRR_FIX_4K_C0000, %ecx |
| simplemask CacheSize, 0x8000 |
| wrmsr |
| #endif |
| |
| /* Enable caching for 0-32K using fixed MTRR. */ |
| movl $MTRR_FIX_4K_C8000, %ecx |
| simplemask CacheSize, 0 |
| wrmsr |
| |
| #if CONFIG_XIP_ROM_SIZE |
| |
| /* |
| * Enable write base caching so we can do execute in place (XIP) |
| * on the flash ROM. |
| */ |
| movl $MTRR_PHYS_BASE(1), %ecx |
| xorl %edx, %edx |
| /* |
| * IMPORTANT: The following calculation _must_ be done at runtime. See |
| * http://www.coreboot.org/pipermail/coreboot/2010-October/060855.html |
| */ |
| movl $copy_and_run, %eax |
| andl $(~(CONFIG_XIP_ROM_SIZE - 1)), %eax |
| orl $MTRR_TYPE_WRBACK, %eax |
| wrmsr |
| |
| movl $MTRR_PHYS_MASK(1), %ecx |
| movl $0x0000000f, %edx |
| movl $(~(CONFIG_XIP_ROM_SIZE - 1) | MTRR_PHYS_MASK_VALID), %eax |
| wrmsr |
| #endif /* CONFIG_XIP_ROM_SIZE */ |
| |
| /* Enable cache. */ |
| movl %cr0, %eax |
| andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax |
| movl %eax, %cr0 |
| |
| /* Read the range with lodsl. */ |
| movl $CacheBase, %esi |
| cld |
| movl $(CacheSize >> 2), %ecx |
| rep lodsl |
| |
| /* Clear the range. */ |
| movl $CacheBase, %edi |
| movl $(CacheSize >> 2), %ecx |
| xorl %eax, %eax |
| rep stosl |
| |
| #if 0 |
| /* Check the cache as ram. */ |
| movl $CacheBase, %esi |
| movl $(CacheSize >> 2), %ecx |
| .xin1: |
| movl %esi, %eax |
| movl %eax, (%esi) |
| decl %ecx |
| je .xout1 |
| add $4, %esi |
| jmp .xin1 |
| .xout1: |
| |
| movl $CacheBase, %esi |
| // movl $(CacheSize >> 2), %ecx |
| movl $4, %ecx |
| .xin1x: |
| movl %esi, %eax |
| |
| movl $0x4000, %edx |
| movb %ah, %al |
| .testx1: |
| outb %al, $0x80 |
| decl %edx |
| jnz .testx1 |
| |
| movl (%esi), %eax |
| cmpb 0xff, %al |
| je .xin2 /* Don't show. */ |
| |
| movl $0x4000, %edx |
| .testx2: |
| outb %al, $0x80 |
| decl %edx |
| jnz .testx2 |
| |
| .xin2: |
| decl %ecx |
| je .xout1x |
| add $4, %esi |
| jmp .xin1x |
| .xout1x: |
| #endif |
| |
| movl $(CacheBase + CacheSize - 4), %eax |
| movl %eax, %esp |
| lout: |
| /* Restore the BIST result. */ |
| movl %ebp, %eax |
| |
| /* We need to set EBP? No need. */ |
| movl %esp, %ebp |
| pushl %eax /* BIST */ |
| call main |
| |
| /* We don't need CAR from now on. */ |
| |
| /* Disable cache. */ |
| movl %cr0, %eax |
| orl $CR0_CacheDisable, %eax |
| movl %eax, %cr0 |
| |
| /* Clear sth. */ |
| movl $MTRR_FIX_4K_C8000, %ecx |
| xorl %edx, %edx |
| xorl %eax, %eax |
| wrmsr |
| |
| #if CONFIG_DCACHE_RAM_SIZE > 0x8000 |
| movl $MTRR_FIX_4K_C0000, %ecx |
| wrmsr |
| #endif |
| |
| /* |
| * Set the default memory type and disable fixed |
| * and enable variable MTRRs. |
| */ |
| movl $MTRR_DEF_TYPE_MSR, %ecx |
| xorl %edx, %edx |
| movl $MTRR_DEF_TYPE_EN, %eax /* Enable variable and disable fixed MTRRs. */ |
| wrmsr |
| |
| /* Enable cache. */ |
| movl %cr0, %eax |
| andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax |
| movl %eax, %cr0 |
| |
| __main: |
| post_code(POST_PREPARE_RAMSTAGE) |
| cld /* Clear direction flag. */ |
| |
| movl $CONFIG_RAMTOP, %esp |
| movl %esp, %ebp |
| call copy_and_run |
| |
| .Lhlt: |
| post_code(POST_DEAD_CODE) |
| hlt |
| jmp .Lhlt |