| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2011 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| |
| #ifndef _SB900_CFG_H_ |
| #define _SB900_CFG_H_ |
| |
| #include <stdint.h> |
| |
| |
| /** |
| * @section BIOSSize BIOSSize |
| * @li <b>0</b> - 1M |
| * @li <b>1</b> - 2M |
| * @li <b>3</b> - 4M |
| * @li <b>7</b> - 8M |
| * In Hudson-2, default ROM size is 1M Bytes, if your platform |
| * ROM bigger then 1M you have to set the ROM size outside CIMx |
| * module and before AGESA module get call. |
| */ |
| #define BIOS_SIZE_1M 0 |
| #define BIOS_SIZE_2M 1 |
| #define BIOS_SIZE_4M 3 |
| #define BIOS_SIZE_8M 7 |
| |
| #ifndef BIOS_SIZE |
| #if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1 |
| #define BIOS_SIZE BIOS_SIZE_1M |
| #elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 |
| #define BIOS_SIZE BIOS_SIZE_2M |
| #elif CONFIG_COREBOOT_ROMSIZE_KB_4096 == 1 |
| #define BIOS_SIZE BIOS_SIZE_4M |
| #elif CONFIG_COREBOOT_ROMSIZE_KB_8192 == 1 |
| #define BIOS_SIZE BIOS_SIZE_8M |
| #endif |
| #endif |
| |
| /** |
| * @section SBCIMx_LEGACY_FREE SBCIMx_LEGACY_FREE |
| * @li <b>1</b> - Legacy free enable |
| * @li <b>0</b> - Legacy free disable |
| */ |
| #ifndef SBCIMx_LEGACY_FREE |
| #define SBCIMx_LEGACY_FREE 0 |
| #endif |
| |
| /** |
| * @section SpiSpeed |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #ifndef SBCIMX_SPI_SPEED |
| #define SBCIMX_SPI_SPEED 0 |
| #endif |
| |
| /** |
| * @section SpiFastSpeed |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #ifndef SBCIMX_SPI_FASTSPEED |
| #define SBCIMX_SPI_FASTSPEED 0 |
| #endif |
| |
| /** |
| * @section SpiMode |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #ifndef SBCIMX_SPI_MODE |
| #define SBCIMX_SPI_MODE 0 |
| #endif |
| |
| /** |
| * @section SpiBurstWrite |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #ifndef SBCIMX_SPI_BURST_WRITE |
| #define SBCIMX_SPI_BURST_WRITE 0 |
| #endif |
| |
| /** |
| * @section INCHIP_EC_KBD INCHIP_EC_KBD |
| * @li <b>0</b> - Use SIO PS/2 function. |
| * @li <b>1</b> - Use EC PS/2 function. |
| */ |
| #ifndef INCHIP_EC_KBD |
| #define INCHIP_EC_KBD 0 |
| #endif |
| |
| /** |
| * @section INCHIP_EC_CHANNEL10 INCHIP_EC_CHANNEL10 |
| * @li <b>0</b> - EC controller NOT support Channel10 |
| * @li <b>1</b> - EC controller support Channel10. |
| */ |
| #ifndef INCHIP_EC_CHANNEL10 |
| #define INCHIP_EC_CHANNEL10 1 |
| #endif |
| |
| /** |
| * @section Smbus0BaseAddress |
| */ |
| // #ifndef SMBUS0_BASE_ADDRESS |
| // #define SMBUS0_BASE_ADDRESS 0xB00 |
| // #endif |
| |
| /** |
| * @section Smbus1BaseAddress |
| */ |
| // #ifndef SMBUS1_BASE_ADDRESS |
| // #define SMBUS1_BASE_ADDRESS 0xB21 |
| // #endif |
| |
| /** |
| * @section SioPmeBaseAddress |
| */ |
| // #ifndef SIO_PME_BASE_ADDRESS |
| // #define SIO_PME_BASE_ADDRESS 0xE00 |
| // #endif |
| |
| /** |
| * @section WatchDogTimerBase |
| */ |
| // #ifndef WATCHDOG_TIMER_BASE_ADDRESS |
| // #define WATCHDOG_TIMER_BASE_ADDRESS 0xFEC00000 |
| // #endif |
| |
| /** |
| * @section GecShadowRomBase |
| */ |
| #ifndef GEC_ROM_SHADOW_ADDRESS |
| #define GEC_ROM_SHADOW_ADDRESS 0xFED61000 |
| #endif |
| |
| /** |
| * @section SpiRomBaseAddress |
| */ |
| // #ifndef SPI_BASE_ADDRESS |
| // #define SPI_BASE_ADDRESS 0xFEC10000 |
| // #endif |
| |
| /** |
| * @section AcpiPm1EvtBlkAddr |
| */ |
| // #ifndef PM1_EVT_BLK_ADDRESS |
| // #define PM1_EVT_BLK_ADDRESS 0x400 |
| // #endif |
| |
| /** |
| * @section AcpiPm1CntBlkAddr |
| */ |
| // #ifndef PM1_CNT_BLK_ADDRESS |
| // #define PM1_CNT_BLK_ADDRESS 0x404 |
| // #endif |
| |
| /** |
| * @section AcpiPmTmrBlkAddr |
| */ |
| // #ifndef PM1_TMR_BLK_ADDRESS |
| // #define PM1_TMR_BLK_ADDRESS 0x408 |
| // #endif |
| |
| /** |
| * @section CpuControlBlkAddr |
| */ |
| // #ifndef CPU_CNT_BLK_ADDRESS |
| // #define CPU_CNT_BLK_ADDRESS 0x410 |
| // #endif |
| |
| /** |
| * @section AcpiGpe0BlkAddr |
| */ |
| // #ifndef GPE0_BLK_ADDRESS |
| // #define GPE0_BLK_ADDRESS 0x420 |
| // #endif |
| |
| /** |
| * @section SmiCmdPortAddr |
| */ |
| // #ifndef SMI_CMD_PORT |
| // #define SMI_CMD_PORT 0xB0 |
| // #endif |
| |
| /** |
| * @section AcpiPmaCntBlkAddr |
| */ |
| // #ifndef ACPI_PMA_CNT_BLK_ADDRESS |
| // #define ACPI_PMA_CNT_BLK_ADDRESS 0xFE00 |
| // #endif |
| |
| /** |
| * @section SataController |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #ifndef INCHIP_SATA_CONTROLLER |
| #define INCHIP_SATA_CONTROLLER 1 |
| #endif |
| |
| /** |
| * @section SataIdeCombMdPriSecOpt |
| * @li <b>0</b> - Primary |
| * @li <b>1</b> - Secondary<TD></TD> |
| * Sata Controller set as primary or |
| * secondary while Combined Mode is enabled |
| */ |
| #ifndef SATA_COMBINE_MODE_CHANNEL |
| #define SATA_COMBINE_MODE_CHANNEL 0 |
| #endif |
| |
| /** |
| * @section SataSetMaxGen2 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| * SataController Set to Max Gen2 mode |
| */ |
| #ifndef SATA_MAX_GEN2_MODE |
| #define SATA_MAX_GEN2_MODE 0 |
| #endif |
| |
| /** |
| * @section SataIdeCombinedMode |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| * Sata IDE Controller set to Combined Mode |
| */ |
| #ifndef SATA_COMBINE_MODE |
| #define SATA_COMBINE_MODE 0 |
| #endif |
| |
| #define SATA_CLK_RESERVED 9 |
| |
| /** |
| * @section NbSbGen2 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #ifndef NB_SB_GEN2 |
| #define NB_SB_GEN2 1 |
| #endif |
| |
| /** |
| * @section SataInternal100Spread |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #ifndef INCHIP_SATA_INTERNAL_100_SPREAD |
| #define INCHIP_SATA_INTERNAL_100_SPREAD 0 |
| #endif |
| |
| /** |
| * @section Cg2Pll |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #ifndef INCHIP_CG2_PLL |
| #define INCHIP_CG2_PLL 0 |
| #endif |
| |
| |
| |
| |
| /** |
| * @section SpreadSpectrum |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| * Spread Spectrum function |
| */ |
| #define INCHIP_SPREAD_SPECTRUM 1 |
| |
| /** |
| * @section INCHIP_USB_CINFIG INCHIP_USB_CINFIG |
| * |
| * - Usb Ohci1 Contoller is define at BIT0 |
| * 0:Disable 1:Enable |
| * (Bus 0 Dev 18 Func0) |
| * - Usb Ehci1 Contoller is define at BIT1 |
| * 0:Disable 1:Enable |
| * (Bus 0 Dev 18 Func2) |
| * - Usb Ohci2 Contoller is define at BIT2 |
| * 0:Disable 1:Enable |
| * (Bus 0 Dev 19 Func0) |
| * - Usb Ehci2 Contoller is define at BIT3 |
| * 0:Disable 1:Enable |
| * (Bus 0 Dev 19 Func2) |
| * - Usb Ohci3 Contoller is define at BIT4 |
| * 0:Disable 1:Enable |
| * (Bus 0 Dev 22 Func0) |
| * - Usb Ehci3 Contoller is define at BIT5 |
| * 0:Disable 1:Enable |
| * (Bus 0 Dev 22 Func2) |
| * - Usb Ohci4 Contoller is define at BIT6 |
| * 0:Disable 1:Enable |
| * (Bus 0 Dev 20 Func5) |
| */ |
| #define INCHIP_USB_CINFIG 0x7F |
| #define INCHIP_USB_OHCI1_CINFIG 0x01 |
| #define INCHIP_USB_OHCI2_CINFIG 0x01 |
| #if CONFIG_ONBOARD_USB30 == 1 |
| #define INCHIP_USB_OHCI3_CINFIG 0x00 |
| #else |
| #define INCHIP_USB_OHCI3_CINFIG 0x01 |
| #endif |
| #define INCHIP_USB_OHCI4_CINFIG 0x01 |
| #define INCHIP_USB_EHCI1_CINFIG 0x01 |
| #define INCHIP_USB_EHCI2_CINFIG 0x01 |
| #define INCHIP_USB_EHCI3_CINFIG 0x01 |
| |
| /** |
| * @section INCHIP_SATA_MODE INCHIP_SATA_MODE |
| * @li <b>000</b> - Native IDE mode |
| * @li <b>001</b> - RAID mode |
| * @li <b>010</b> - AHCI mode |
| * @li <b>011</b> - Legacy IDE mode |
| * @li <b>100</b> - IDE->AHCI mode |
| * @li <b>101</b> - AHCI mode as 7804 ID (AMD driver) |
| * @li <b>110</b> - IDE->AHCI mode as 7804 ID (AMD driver) |
| */ |
| #define INCHIP_SATA_MODE 0 |
| |
| /** |
| * @section INCHIP_IDE_MODE INCHIP_IDE_MODE |
| * @li <b>0</b> - Legacy IDE mode |
| * @li <b>1</b> - Native IDE mode<TD></TD> |
| * ** DO NOT ALLOW SATA & IDE use same mode ** |
| */ |
| #define INCHIP_IDE_MODE 1 |
| |
| #define SATA_PORT_MULT_CAP_RESERVED 1 |
| |
| /** |
| * @section INCHIP_AZALIA_CONTROLLER INCHIP_AZALIA_CONTROLLER |
| * @li <b>0</b> - Auto : Detect Azalia controller automatically. |
| * @li <b>1</b> - Diable : Disable Azalia controller. |
| * @li <b>2</b> - Enable : Enable Azalia controller. |
| */ |
| #define INCHIP_AZALIA_CONTROLLER 2 |
| #define AZALIA_AUTO 0 |
| #define AZALIA_DISABLE 1 |
| #define AZALIA_ENABLE 2 |
| |
| /** |
| * @section INCHIP_AZALIA_PIN_CONFIG INCHIP_AZALIA_PIN_CONFIG |
| * @li <b>0</b> - disable |
| * @li <b>1</b> - enable |
| */ |
| #define INCHIP_AZALIA_PIN_CONFIG 1 |
| |
| /** |
| * @section AZALIA_PIN_CONFIG AZALIA_PIN_CONFIG |
| * |
| * SDIN0 is define at BIT0 & BIT1 |
| * - 00: GPIO PIN |
| * - 01: Reserved |
| * - 10: As a Azalia SDIN pin<TD></TD> |
| * SDIN1 is define at BIT2 & BIT3 |
| * - 00: GPIO PIN |
| * - 01: Reserved |
| * - 10: As a Azalia SDIN pin<TD></TD> |
| * SDIN2 is define at BIT4 & BIT5 |
| * - 00: GPIO PIN |
| * - 01: Reserved |
| * - 10: As a Azalia SDIN pin<TD></TD> |
| * SDIN3 is define at BIT6 & BIT7 |
| * - 00: GPIO PIN |
| * - 01: Reserved |
| * - 10: As a Azalia SDIN pin |
| */ |
| #define AZALIA_PIN_CONFIG 0x2A |
| |
| /** |
| * @section AzaliaSnoop |
| * @li <b>0</b> - disable |
| * @li <b>1</b> - enable * |
| */ |
| #define INCHIP_AZALIA_SNOOP 0x01 |
| |
| /** |
| * @section NCHIP_GEC_CONTROLLER |
| * @li <b>0</b> - Enable * |
| * @li <b>1</b> - Disable |
| */ |
| #define INCHIP_GEC_CONTROLLER 0x00 |
| |
| /** |
| * @section SB_HPET_TIMER SB_HPET_TIMER |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SB_HPET_TIMER 1 |
| |
| /** |
| * @section SB_GPP_CONTROLLER SB_GPP_CONTROLLER |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SB_GPP_CONTROLLER 1 |
| |
| /** |
| * @section GPP_LINK_CONFIG GPP_LINK_CONFIG |
| * @li <b>0000</b> - Port ABCD -> 4:0:0:0 |
| * @li <b>0001</b> - N/A |
| * @li <b>0010</b> - Port ABCD -> 2:2:0:0 |
| * @li <b>0011</b> - Port ABCD -> 2:1:1:0 |
| * @li <b>0100</b> - Port ABCD -> 1:1:1:1 |
| */ |
| #define GPP_LINK_CONFIG 4 |
| |
| /** |
| * @section SB_GPP_PORT0 SB_GPP_PORT0 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SB_GPP_PORT0 1 |
| |
| /** |
| * @section SB_GPP_PORT1 SB_GPP_PORT1 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SB_GPP_PORT1 1 |
| |
| /** |
| * @section SB_GPP_PORT2 SB_GPP_PORT2 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SB_GPP_PORT2 1 |
| |
| /** |
| * @section SB_GPP_PORT3 SB_GPP_PORT3 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SB_GPP_PORT3 1 |
| |
| /** |
| * @section SB_IR_CONTROLLER |
| * @li <b>00 </b> - disable |
| * @li <b>01 </b> - Rx and Tx0 |
| * @li <b>10 </b> - Rx and Tx1 |
| * @li <b>11 </b> - Rx and both Tx0,Tx1 |
| */ |
| #define SB_IR_CONTROLLER 3 |
| |
| /** |
| * @section INCHIP_USB_PHY_POWER_DOWN |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_USB_PHY_POWER_DOWN 0 |
| |
| /** |
| * @section INCHIP_NATIVE_PCIE_SUPPOORT |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_NATIVE_PCIE_SUPPOORT 1 |
| |
| /** |
| * @section INCHIP_NB_SB_GEN2 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_NB_SB_GEN2 1 |
| |
| /** |
| * @section INCHIP_GPP_GEN2 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_GPP_GEN2 1 |
| |
| /** |
| * @section INCHIP_GPP_MEMORY_WRITE_IMPROVE |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_GPP_MEMORY_WRITE_IMPROVE 1 |
| |
| /** |
| * @section INCHIP_GEC_PHY_STATUS |
| * @li <b>0</b> - Gb PHY Mode * |
| * @li <b>1</b> - 100/10 PHY Mode |
| */ |
| #define INCHIP_GEC_PHY_STATUS 0 |
| |
| /** |
| * @section INCHIP_GEC_POWER_POLICY |
| * @li <b>0</b> - S3/S5 |
| * @li <b>1</b> - S5 |
| * @li <b>2</b> - S3 |
| * @li <b>3</b> - Never power down * |
| */ |
| #define INCHIP_GEC_POWER_POLICY 3 |
| |
| /** |
| * @section INCHIP_GEC_DEBUGBUS |
| * @li <b>0</b> - Disable * |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_GEC_DEBUGBUS 0 |
| |
| /** |
| * @section SATA_MAX_GEN2_MODE SATA_MAX_GEN2_MODE |
| * @li <b>0</b> - Disable * |
| * @li <b>1</b> - Enable |
| * SataController Set to Max Gen2 mode |
| */ |
| #define SATA_MAX_GEN2_MODE 0 |
| |
| /** |
| * @section INCHIP_SATA_AGGR_LINK_PM_CAP |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable * |
| * SataController Set to aggressive link PM capability |
| */ |
| #define INCHIP_SATA_AGGR_LINK_PM_CAP 0 |
| |
| /** |
| * @section INCHIP_SATA_PORT_MULT_CAP |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable * |
| * SataController Set to Port Multiple capability |
| */ |
| #define INCHIP_SATA_PORT_MULT_CAP 1 |
| |
| /** |
| * @section INCHIP_SATA_PSC_CAP |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable * |
| */ |
| #define INCHIP_SATA_PSC_CAP 0 |
| |
| /** |
| * @section INCHIP_SATA_SSC_CAP |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable * |
| */ |
| #define INCHIP_SATA_SSC_CAP 0 |
| |
| /** |
| * @section INCHIP_SATA_CLK_AUTO_OFF |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable * |
| */ |
| #define INCHIP_SATA_CLK_AUTO_OFF 1 |
| |
| /** |
| * @section INCHIP_SATA_FIS_BASE_SW |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable * |
| */ |
| #define INCHIP_SATA_FIS_BASE_SW 1 |
| |
| /** |
| * @section INCHIP_SATA_CCC_SUPPORT |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable * |
| */ |
| #define INCHIP_SATA_CCC_SUPPORT 1 |
| |
| /** |
| * @section INCHIP_SATA_MSI_CAP |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable * |
| */ |
| #define INCHIP_SATA_MSI_CAP 1 |
| |
| /** |
| * @section CIMXSB_SATA_TARGET_8DEVICE_CAP |
| * @li <b>0</b> - Disable * |
| * @li <b>1</b> - Enable |
| */ |
| #define CIMXSB_SATA_TARGET_8DEVICE_CAP 0 |
| |
| /** |
| * @section SATA_DISABLE_GENERIC_MODE |
| * @li <b>0</b> - Disable * |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_DISABLE_GENERIC_MODE_CAP 0 |
| |
| /** |
| * @section SATA_AHCI_ENCLOSURE_CAP |
| * @li <b>0</b> - Disable * |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_AHCI_ENCLOSURE_CAP 0 |
| |
| /** |
| * @section SataForceRaid (RISD5 mode) |
| * @li <b>0</b> - Disable * |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_SATA_FORCE_RAID5 0 |
| |
| /** |
| * @section SATA_GPIO_0_CAP |
| * @li <b>0</b> - Disable * |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_GPIO_0_CAP 0 |
| |
| /** |
| * @section SATA_GPIO_1_CAP |
| * @li <b>0</b> - Disable * |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_GPIO_1_CAP 0 |
| |
| /** |
| * @section SataPhyPllShutDown |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable * |
| */ |
| #define SATA_PHY_PLL_SHUTDOWN 1 |
| |
| /** |
| * @section ImcEnableOverWrite |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define IMC_ENABLE_OVER_WRITE 0 |
| |
| /** |
| * @section UsbMsi |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define USB_MSI 0 |
| |
| /** |
| * @section HdAudioMsi |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define HDAUDIO_MSI 0 |
| |
| /** |
| * @section LpcMsi |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define LPC_MSI 0 |
| |
| /** |
| * @section PcibMsi |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define PCIB_MSI 0 |
| |
| /** |
| * @section AbMsi |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define AB_MSI 0 |
| |
| /** |
| * @section GecShadowRomBase |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable * |
| */ |
| #define GEC_SHADOWROM_BASE 0xFED61000 |
| |
| /** |
| * @section SataController |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable * |
| */ |
| #define SATA_CONTROLLER 1 |
| |
| /** |
| * @section SataIdeCombMdPriSecOpt |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_IDE_COMBMD_PRISEC_OPT 0 |
| |
| /** |
| * @section SataIdeCombinedMode |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_IDECOMBINED_MODE 0 |
| |
| /** |
| * @section sdConfig |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable * |
| */ |
| #define SB_SD_CONFIG 1 |
| |
| /** |
| * @section sdSpeed |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable * |
| */ |
| #define SB_SD_SPEED 1 |
| |
| /** |
| * @section sdBitwidth |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable * |
| */ |
| #define SB_SD_BITWIDTH 1 |
| |
| /** |
| * @section SataDisUnusedIdePChannel |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_DISUNUSED_IDE_P_CHANNEL 0 |
| |
| /** |
| * @section SataDisUnusedIdeSChannel |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_DISUNUSED_IDE_S_CHANNEL 0 |
| |
| /** |
| * @section IdeDisUnusedIdePChannel |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define IDE_DISUNUSED_IDE_P_CHANNEL 0 |
| |
| /** |
| * @section IdeDisUnusedIdeSChannel |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define IDE_DISUNUSED_IDE_S_CHANNEL 0 |
| |
| /** |
| * @section IdeDisUnusedIdeSChannel |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| |
| /** |
| * @section SataEspPort0 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_ESP_PORT0 0 |
| |
| /** |
| * @section SataEspPort1 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_ESP_PORT1 0 |
| |
| /** |
| * @section SataEspPort2 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_ESP_PORT2 0 |
| |
| /** |
| * @section SataEspPort3 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_ESP_PORT3 0 |
| |
| /** |
| * @section SataEspPort4 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_ESP_PORT4 0 |
| |
| /** |
| * @section SataEspPort5 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_ESP_PORT5 0 |
| |
| /** |
| * @section SataEspPort6 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_ESP_PORT6 0 |
| |
| /** |
| * @section SataEspPort7 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_ESP_PORT7 0 |
| |
| /** |
| * @section SataPortPower0 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORT_POWER_PORT0 0 |
| |
| /** |
| * @section SataPortPower1 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORT_POWER_PORT1 0 |
| |
| /** |
| * @section SataPortPower2 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORT_POWER_PORT2 0 |
| |
| /** |
| * @section SataPortPower3 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORT_POWER_PORT3 0 |
| |
| /** |
| * @section SataPortPower4 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORT_POWER_PORT4 0 |
| |
| /** |
| * @section SataPortPower5 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORT_POWER_PORT5 0 |
| |
| /** |
| * @section SataPortPower6 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORT_POWER_PORT6 0 |
| |
| /** |
| * @section SataPortPower7 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORT_POWER_PORT7 0 |
| |
| /** |
| * @section SataPortMd0 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORTMODE_PORT0 3 |
| |
| /** |
| * @section SataPortMd1 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORTMODE_PORT1 3 |
| |
| /** |
| * @section SataPortMd2 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORTMODE_PORT2 3 |
| |
| /** |
| * @section SataPortMd3 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORTMODE_PORT3 3 |
| |
| /** |
| * @section SataPortMd4 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORTMODE_PORT4 0 |
| |
| /** |
| * @section SataPortMd5 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORTMODE_PORT5 0 |
| |
| /** |
| * @section SataPortMd6 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORTMODE_PORT6 0 |
| |
| /** |
| * @section SataPortMd7 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_PORTMODE_PORT7 0 |
| |
| /** |
| * @section SataHotRemovelEnh0 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_HOTREMOVEL_ENH_PORT0 0 |
| |
| /** |
| * @section SataHotRemovelEnh1 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_HOTREMOVEL_ENH_PORT1 0 |
| |
| /** |
| * @section SataHotRemovelEnh2 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_HOTREMOVEL_ENH_PORT2 0 |
| |
| /** |
| * @section SataHotRemovelEnh3 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_HOTREMOVEL_ENH_PORT3 0 |
| |
| /** |
| * @section SataHotRemovelEnh4 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_HOTREMOVEL_ENH_PORT4 0 |
| |
| /** |
| * @section SataHotRemovelEnh5 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_HOTREMOVEL_ENH_PORT5 0 |
| |
| /** |
| * @section SataHotRemovelEnh6 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_HOTREMOVEL_ENH_PORT6 0 |
| |
| /** |
| * @section SataHotRemovelEnh7 |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define SATA_HOTREMOVEL_ENH_PORT7 0 |
| |
| /** |
| * @section XhciSwitch |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #if CONFIG_ONBOARD_USB30 == 1 |
| #define SB_XHCI_SWITCH 0 |
| #else |
| #define SB_XHCI_SWITCH 1 |
| #endif |
| |
| /** |
| * @section FrontPanelDetected |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_FRONT_PANEL_DETECTED 0 |
| |
| /** |
| * @section AnyHT200MhzLink |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_ANY_HT_200MHZ_LINK 0 |
| |
| /** |
| * @section PcibClkStopOverride |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_PCIB_CLK_STOP_OVERRIDE 0 |
| |
| /** |
| * @section GppLinkConfig |
| * @li <b>0000</b> - Port ABCD -> 4:0:0:0 |
| * @li <b>0001</b> - N/A |
| * @li <b>0010</b> - Port ABCD -> 2:2:0:0 |
| * @li <b>0011</b> - Port ABCD -> 2:1:1:0 |
| * @li <b>0100</b> - Port ABCD -> 1:1:1:1 |
| */ |
| #define INCHIP_GPP_LINK_CONFIG 4 |
| |
| /** |
| * @section GppUnhidePorts |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_GPP_UNHIDE_PORTS 0 |
| |
| /** |
| * @section GppPortAspm |
| * @li <b>01</b> - Disabled |
| * @li <b>01</b> - L0s |
| * @li <b>10</b> - L1 |
| * @li <b>11</b> - L0s + L1 |
| */ |
| #define INCHIP_GPP_PORT_ASPM 3 |
| |
| /** |
| * @section GppLaneReversal |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_GPP_LANEREVERSAL 0 |
| |
| /** |
| * @section AlinkPhyPllPowerDown |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_ALINK_PHY_PLL_POWER_DOWN 1 |
| |
| /** |
| * @section GppPhyPllPowerDown |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_GPP_PHY_PLL_POWER_DOWN 1 |
| |
| /** |
| * @section GppDynamicPowerSaving |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_GPP_DYNAMIC_POWER_SAVING 1 |
| |
| /** |
| * @section PcieAER |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_PCIE_AER 0 |
| |
| /** |
| * @section PcieRAS |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_PCIE_RAS 0 |
| |
| /** |
| * @section GppHardwareDowngrade |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_GPP_HARDWARE_DOWNGRADE 0 |
| |
| /** |
| * @section GppToggleReset |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_GPP_TOGGLE_RESET 0 |
| |
| /** |
| * @section SbPcieOrderRule |
| * @li <b>00</b> - Disable |
| * @li <b>01</b> - Rule 1 |
| * @li <b>10</b> - Rule 2 |
| */ |
| #define INCHIP_SB_PCIE_ORDER_RULE 2 |
| |
| /** |
| * @section AcDcMsg |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_ACDC_MSG 0 |
| |
| /** |
| * @section TimerTickTrack |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_TIMER_TICK_TRACK 1 |
| |
| /** |
| * @section ClockInterruptTag |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_CLOCK_INTERRUPT_TAG 1 |
| |
| /** |
| * @section OhciTrafficHanding |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_OHCI_TRAFFIC_HANDING 0 |
| |
| /** |
| * @section EhciTrafficHanding |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_EHCI_TRAFFIC_HANDING 0 |
| |
| /** |
| * @section FusionMsgCMultiCore |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_FUSION_MSGC_MULTICORE 0 |
| |
| /** |
| * @section FusionMsgCStage |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_FUSION_MSGC_STAGE 0 |
| |
| /** |
| * @section ALinkClkGateOff |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_ALINK_CLK_GATE_OFF 0 |
| |
| /** |
| * @section BLinkClkGateOff |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_BLINK_CLK_GATE_OFF 0 |
| |
| /** |
| * @section SlowSpeedABlinkClock |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_SLOW_SPEED_ABLINK_CLOCK 0 |
| |
| /** |
| * @section AbClockGating |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_AB_CLOCK_GATING 1 |
| |
| /** |
| * @section GppClockGating |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_GPP_CLOCK_GATING 1 |
| |
| /** |
| * @section L1TimerOverwrite |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_L1_TIMER_OVERWRITE 0 |
| |
| /** |
| * @section UmiDynamicSpeedChange |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_UMI_DYNAMIC_SPEED_CHANGE 0 |
| |
| /** |
| * @section SbAlinkGppTxDriverStrength |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_ALINK_GPP_TX_DRV_STRENGTH 0 |
| |
| /** |
| * @section StressResetMode |
| * @li <b>0</b> - Disable |
| * @li <b>1</b> - Enable |
| */ |
| #define INCHIP_STRESS_RESET_MODE 0 |
| |
| #ifndef SB_PCI_CLOCK_RESERVED |
| #define SB_PCI_CLOCK_RESERVED 0x0 //according to CIMx change 0x1F |
| #endif |
| |
| /** |
| * @brief South Bridge CIMx configuration |
| * |
| */ |
| void sb900_cimx_config(AMDSBCFG *sb_cfg); |
| void SbPowerOnInit_Config(AMDSBCFG *sb_cfg); |
| |
| /** |
| * @brief Entry point of Southbridge CIMx callout |
| * |
| * prototype UINT32 (*SBCIM_HOOK_ENTRY)(UINT32 Param1, UINT32 Param2, void* pConfig) |
| * |
| * @param[in] func Southbridge CIMx Function ID. |
| * @param[in] data Southbridge Input Data. |
| * @param[in] sb_cfg Southbridge configuration structure pointer. |
| * |
| */ |
| u32 sb900_callout_entry(u32 func, u32 data, void* sb_cfg); |
| |
| #endif |