| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2013 Google Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /* The devicetree parser expects chip.h to reside directly in the path |
| * specified by the devicetree. */ |
| |
| #ifndef _BAYTRAIL_CHIP_H_ |
| #define _BAYTRAIL_CHIP_H_ |
| |
| #include <stdint.h> |
| |
| struct soc_intel_baytrail_config { |
| uint8_t enable_xdp_tap; |
| uint8_t sata_port_map; |
| uint8_t sata_ahci; |
| uint8_t ide_legacy_combined; |
| uint8_t clkreq_enable; |
| |
| /* VR low power settings -- enable PS2 mode for gfx and core */ |
| int vnn_ps2_enable; |
| int vcc_ps2_enable; |
| |
| /* Disable SLP_X stretching after SUS power well loss. */ |
| int disable_slp_x_stretch_sus_fail; |
| |
| /* USB Port Disable mask */ |
| uint16_t usb2_port_disable_mask; |
| uint16_t usb3_port_disable_mask; |
| |
| /* USB routing */ |
| int usb_route_to_xhci; |
| |
| /* USB PHY settings specific to the board */ |
| uint32_t usb2_per_port_lane0; |
| uint32_t usb2_per_port_rcomp_hs_pullup0; |
| uint32_t usb2_per_port_lane1; |
| uint32_t usb2_per_port_rcomp_hs_pullup1; |
| uint32_t usb2_per_port_lane2; |
| uint32_t usb2_per_port_rcomp_hs_pullup2; |
| uint32_t usb2_per_port_lane3; |
| uint32_t usb2_per_port_rcomp_hs_pullup3; |
| uint32_t usb2_comp_bg; |
| |
| /* LPE Audio Clock configuration. */ |
| int lpe_codec_clk_freq; /* 19 or 25 are valid. */ |
| int lpe_codec_clk_num; /* Platform clock pins. [0:5] are valid. */ |
| |
| /* Native SD Card controller - override controller capabilities. */ |
| uint32_t sdcard_cap_low; |
| uint32_t sdcard_cap_high; |
| |
| /* Enable devices in ACPI mode */ |
| int lpss_acpi_mode; |
| int scc_acpi_mode; |
| int lpe_acpi_mode; |
| |
| /* Allow PCIe devices to wake system from suspend. */ |
| int pcie_wake_enable; |
| |
| uint8_t gpu_pipea_port_select; /* Port select: 1=DP_B 2=DP_C */ |
| uint16_t gpu_pipea_power_on_delay; |
| uint16_t gpu_pipea_light_on_delay; |
| uint16_t gpu_pipea_power_off_delay; |
| uint16_t gpu_pipea_light_off_delay; |
| uint16_t gpu_pipea_power_cycle_delay; |
| int gpu_pipea_pwm_freq_hz; |
| |
| uint8_t gpu_pipeb_port_select; /* Port select: 1=DP_B 2=DP_C */ |
| uint16_t gpu_pipeb_power_on_delay; |
| uint16_t gpu_pipeb_light_on_delay; |
| uint16_t gpu_pipeb_power_off_delay; |
| uint16_t gpu_pipeb_light_off_delay; |
| uint16_t gpu_pipeb_power_cycle_delay; |
| int gpu_pipeb_pwm_freq_hz; |
| int disable_ddr_2x_refresh_rate; |
| }; |
| |
| extern struct chip_operations soc_intel_baytrail_ops; |
| #endif /* _BAYTRAIL_CHIP_H_ */ |