| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2012 Samsung Electronics |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| /* Clock setup for SMDK5250 board based on EXYNOS5 */ |
| |
| #include <console/console.h> |
| #include <delay.h> |
| #include "clk.h" |
| #include "cpu.h" |
| #include "dp.h" |
| #include "setup.h" |
| |
| void system_clock_init(struct mem_timings *mem, |
| struct arm_clk_ratios *arm_clk_ratio) |
| { |
| struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; |
| struct exynos5_mct_regs *mct_regs = |
| (struct exynos5_mct_regs *)EXYNOS5_MULTI_CORE_TIMER_BASE; |
| u32 val, tmp; |
| |
| /* Turn on the MCT as early as possible. */ |
| mct_regs->g_tcon |= (1 << 8); |
| |
| clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK); |
| do { |
| val = readl(&clk->mux_stat_cpu); |
| } while ((val | MUX_APLL_SEL_MASK) != val); |
| |
| clrbits_le32(&clk->src_core1, MUX_MPLL_SEL_MASK); |
| do { |
| val = readl(&clk->mux_stat_core1); |
| } while ((val | MUX_MPLL_SEL_MASK) != val); |
| |
| clrbits_le32(&clk->src_top2, MUX_CPLL_SEL_MASK); |
| clrbits_le32(&clk->src_top2, MUX_EPLL_SEL_MASK); |
| clrbits_le32(&clk->src_top2, MUX_VPLL_SEL_MASK); |
| clrbits_le32(&clk->src_top2, MUX_GPLL_SEL_MASK); |
| tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK |
| | MUX_GPLL_SEL_MASK; |
| do { |
| val = readl(&clk->mux_stat_top2); |
| } while ((val | tmp) != val); |
| |
| clrbits_le32(&clk->src_cdrex, MUX_BPLL_SEL_MASK); |
| do { |
| val = readl(&clk->mux_stat_cdrex); |
| } while ((val | MUX_BPLL_SEL_MASK) != val); |
| |
| /* PLL locktime */ |
| writel(APLL_LOCK_VAL, &clk->apll_lock); |
| |
| writel(MPLL_LOCK_VAL, &clk->mpll_lock); |
| |
| writel(BPLL_LOCK_VAL, &clk->bpll_lock); |
| |
| writel(CPLL_LOCK_VAL, &clk->cpll_lock); |
| |
| writel(GPLL_LOCK_VAL, &clk->gpll_lock); |
| |
| writel(EPLL_LOCK_VAL, &clk->epll_lock); |
| |
| writel(VPLL_LOCK_VAL, &clk->vpll_lock); |
| |
| writel(CLK_REG_DISABLE, &clk->pll_div2_sel); |
| |
| writel(MUX_HPM_SEL_MASK, &clk->src_cpu); |
| do { |
| val = readl(&clk->mux_stat_cpu); |
| } while ((val | HPM_SEL_SCLK_MPLL) != val); |
| |
| val = arm_clk_ratio->arm2_ratio << 28 |
| | arm_clk_ratio->apll_ratio << 24 |
| | arm_clk_ratio->pclk_dbg_ratio << 20 |
| | arm_clk_ratio->atb_ratio << 16 |
| | arm_clk_ratio->periph_ratio << 12 |
| | arm_clk_ratio->acp_ratio << 8 |
| | arm_clk_ratio->cpud_ratio << 4 |
| | arm_clk_ratio->arm_ratio; |
| writel(val, &clk->div_cpu0); |
| do { |
| val = readl(&clk->div_stat_cpu0); |
| } while (0 != val); |
| |
| writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1); |
| do { |
| val = readl(&clk->div_stat_cpu1); |
| } while (0 != val); |
| |
| /* switch A15 clock source to OSC clock before changing APLL */ |
| clrbits_le32(&clk->src_cpu, APLL_FOUT); |
| |
| /* Set APLL */ |
| writel(APLL_CON1_VAL, &clk->apll_con1); |
| val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv, |
| arm_clk_ratio->apll_sdiv); |
| writel(val, &clk->apll_con0); |
| while ((readl(&clk->apll_con0) & APLL_CON0_LOCKED) == 0) |
| ; |
| |
| /* now it is safe to switch to APLL */ |
| setbits_le32(&clk->src_cpu, APLL_FOUT); |
| |
| /* Set MPLL */ |
| writel(MPLL_CON1_VAL, &clk->mpll_con1); |
| val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv); |
| writel(val, &clk->mpll_con0); |
| while ((readl(&clk->mpll_con0) & MPLL_CON0_LOCKED) == 0) |
| ; |
| |
| /* |
| * Configure MUX_MPLL_FOUT to choose the direct clock source |
| * path and avoid the fixed DIV/2 block to save power |
| */ |
| setbits_le32(&clk->pll_div2_sel, MUX_MPLL_FOUT_SEL); |
| |
| /* Set BPLL */ |
| if (mem->use_bpll) { |
| writel(BPLL_CON1_VAL, &clk->bpll_con1); |
| val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv); |
| writel(val, &clk->bpll_con0); |
| while ((readl(&clk->bpll_con0) & BPLL_CON0_LOCKED) == 0) |
| ; |
| |
| setbits_le32(&clk->pll_div2_sel, MUX_BPLL_FOUT_SEL); |
| } |
| |
| /* Set CPLL */ |
| writel(CPLL_CON1_VAL, &clk->cpll_con1); |
| val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv); |
| writel(val, &clk->cpll_con0); |
| while ((readl(&clk->cpll_con0) & CPLL_CON0_LOCKED) == 0) |
| ; |
| |
| /* Set GPLL */ |
| writel(GPLL_CON1_VAL, &clk->gpll_con1); |
| val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv); |
| writel(val, &clk->gpll_con0); |
| while ((readl(&clk->gpll_con0) & GPLL_CON0_LOCKED) == 0) |
| ; |
| |
| /* Set EPLL */ |
| writel(EPLL_CON2_VAL, &clk->epll_con2); |
| writel(EPLL_CON1_VAL, &clk->epll_con1); |
| val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv); |
| writel(val, &clk->epll_con0); |
| while ((readl(&clk->epll_con0) & EPLL_CON0_LOCKED) == 0) |
| ; |
| |
| /* Set VPLL */ |
| writel(VPLL_CON2_VAL, &clk->vpll_con2); |
| writel(VPLL_CON1_VAL, &clk->vpll_con1); |
| val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv); |
| writel(val, &clk->vpll_con0); |
| while ((readl(&clk->vpll_con0) & VPLL_CON0_LOCKED) == 0) |
| ; |
| |
| writel(CLK_SRC_CORE0_VAL, &clk->src_core0); |
| writel(CLK_DIV_CORE0_VAL, &clk->div_core0); |
| while (readl(&clk->div_stat_core0) != 0) |
| ; |
| |
| writel(CLK_DIV_CORE1_VAL, &clk->div_core1); |
| while (readl(&clk->div_stat_core1) != 0) |
| ; |
| |
| writel(CLK_DIV_SYSRGT_VAL, &clk->div_sysrgt); |
| while (readl(&clk->div_stat_sysrgt) != 0) |
| ; |
| |
| writel(CLK_DIV_ACP_VAL, &clk->div_acp); |
| while (readl(&clk->div_stat_acp) != 0) |
| ; |
| |
| writel(CLK_DIV_SYSLFT_VAL, &clk->div_syslft); |
| while (readl(&clk->div_stat_syslft) != 0) |
| ; |
| |
| writel(CLK_SRC_TOP0_VAL, &clk->src_top0); |
| writel(CLK_SRC_TOP1_VAL, &clk->src_top1); |
| writel(TOP2_VAL, &clk->src_top2); |
| writel(CLK_SRC_TOP3_VAL, &clk->src_top3); |
| |
| writel(CLK_DIV_TOP0_VAL, &clk->div_top0); |
| while (readl(&clk->div_stat_top0)) |
| ; |
| |
| writel(CLK_DIV_TOP1_VAL, &clk->div_top1); |
| while (readl(&clk->div_stat_top1)) |
| ; |
| |
| writel(CLK_SRC_LEX_VAL, &clk->src_lex); |
| while (1) { |
| val = readl(&clk->mux_stat_lex); |
| if (val == (val | 1)) |
| break; |
| } |
| |
| writel(CLK_DIV_LEX_VAL, &clk->div_lex); |
| while (readl(&clk->div_stat_lex)) |
| ; |
| |
| writel(CLK_DIV_R0X_VAL, &clk->div_r0x); |
| while (readl(&clk->div_stat_r0x)) |
| ; |
| |
| writel(CLK_DIV_R0X_VAL, &clk->div_r0x); |
| while (readl(&clk->div_stat_r0x)) |
| ; |
| |
| writel(CLK_DIV_R1X_VAL, &clk->div_r1x); |
| while (readl(&clk->div_stat_r1x)) |
| ; |
| |
| if (mem->use_bpll) { |
| writel(MUX_BPLL_SEL_MASK | MUX_MCLK_CDREX_SEL | |
| MUX_MCLK_DPHY_SEL, &clk->src_cdrex); |
| } else { |
| writel(CLK_REG_DISABLE, &clk->src_cdrex); |
| } |
| |
| writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex); |
| while (readl(&clk->div_stat_cdrex)) |
| ; |
| |
| val = readl(&clk->src_cpu); |
| val |= CLK_SRC_CPU_VAL; |
| writel(val, &clk->src_cpu); |
| |
| val = readl(&clk->src_top2); |
| val |= CLK_SRC_TOP2_VAL; |
| writel(val, &clk->src_top2); |
| |
| val = readl(&clk->src_core1); |
| val |= CLK_SRC_CORE1_VAL; |
| writel(val, &clk->src_core1); |
| |
| writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys); |
| writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0); |
| while (readl(&clk->div_stat_fsys0)) |
| ; |
| |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_cpu); |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_core); |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_acp); |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_top); |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_lex); |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_r0x); |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_r1x); |
| writel(CLK_REG_DISABLE, &clk->clkout_cmu_cdrex); |
| |
| writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0); |
| writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0); |
| |
| writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1); |
| writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1); |
| writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2); |
| writel(SCLK_SRC_ISP_VAL, &clk->sclk_src_isp); |
| writel(SCLK_DIV_ISP_VAL, &clk->sclk_div_isp); |
| writel(CLK_DIV_ISP0_VAL, &clk->div_isp0); |
| writel(CLK_DIV_ISP1_VAL, &clk->div_isp1); |
| writel(CLK_DIV_ISP2_VAL, &clk->div_isp2); |
| |
| /* FIMD1 SRC CLK SELECTION */ |
| writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp1_0); |
| |
| val = MMC2_PRE_RATIO_VAL << MMC2_PRE_RATIO_OFFSET |
| | MMC2_RATIO_VAL << MMC2_RATIO_OFFSET |
| | MMC3_PRE_RATIO_VAL << MMC3_PRE_RATIO_OFFSET |
| | MMC3_RATIO_VAL << MMC3_RATIO_OFFSET; |
| writel(val, &clk->div_fsys2); |
| } |
| |
| void clock_gate(void) |
| { |
| struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; |
| |
| /* CLK_GATE_IP_SYSRGT */ |
| clrbits_le32(&clk->gate_ip_sysrgt, CLK_C2C_MASK); |
| |
| /* CLK_GATE_IP_ACP */ |
| clrbits_le32(&clk->gate_ip_acp, CLK_SMMUG2D_MASK | |
| CLK_SMMUSSS_MASK | |
| CLK_SMMUMDMA_MASK | |
| CLK_ID_REMAPPER_MASK | |
| CLK_G2D_MASK | |
| CLK_SSS_MASK | |
| CLK_MDMA_MASK | |
| CLK_SECJTAG_MASK); |
| |
| /* CLK_GATE_BUS_SYSLFT */ |
| clrbits_le32(&clk->gate_bus_syslft, CLK_EFCLK_MASK); |
| |
| /* CLK_GATE_IP_ISP0 */ |
| clrbits_le32(&clk->gate_ip_isp0, CLK_UART_ISP_MASK | |
| CLK_WDT_ISP_MASK | |
| CLK_PWM_ISP_MASK | |
| CLK_MTCADC_ISP_MASK | |
| CLK_I2C1_ISP_MASK | |
| CLK_I2C0_ISP_MASK | |
| CLK_MPWM_ISP_MASK | |
| CLK_MCUCTL_ISP_MASK | |
| CLK_INT_COMB_ISP_MASK | |
| CLK_SMMU_MCUISP_MASK | |
| CLK_SMMU_SCALERP_MASK | |
| CLK_SMMU_SCALERC_MASK | |
| CLK_SMMU_FD_MASK | |
| CLK_SMMU_DRC_MASK | |
| CLK_SMMU_ISP_MASK | |
| CLK_GICISP_MASK | |
| CLK_ARM9S_MASK | |
| CLK_MCUISP_MASK | |
| CLK_SCALERP_MASK | |
| CLK_SCALERC_MASK | |
| CLK_FD_MASK | |
| CLK_DRC_MASK | |
| CLK_ISP_MASK); |
| |
| /* CLK_GATE_IP_ISP1 */ |
| clrbits_le32(&clk->gate_ip_isp1, CLK_SPI1_ISP_MASK | |
| CLK_SPI0_ISP_MASK | |
| CLK_SMMU3DNR_MASK | |
| CLK_SMMUDIS1_MASK | |
| CLK_SMMUDIS0_MASK | |
| CLK_SMMUODC_MASK | |
| CLK_3DNR_MASK | |
| CLK_DIS_MASK | |
| CLK_ODC_MASK); |
| |
| /* CLK_GATE_SCLK_ISP */ |
| clrbits_le32(&clk->gate_sclk_isp, SCLK_MPWM_ISP_MASK); |
| |
| /* CLK_GATE_IP_GSCL */ |
| clrbits_le32(&clk->gate_ip_gscl, CLK_SMMUFIMC_LITE2_MASK | |
| CLK_SMMUFIMC_LITE1_MASK | |
| CLK_SMMUFIMC_LITE0_MASK | |
| CLK_SMMUGSCL3_MASK | |
| CLK_SMMUGSCL2_MASK | |
| CLK_SMMUGSCL1_MASK | |
| CLK_SMMUGSCL0_MASK | |
| CLK_GSCL_WRAP_B_MASK | |
| CLK_GSCL_WRAP_A_MASK | |
| CLK_CAMIF_TOP_MASK | |
| CLK_GSCL3_MASK | |
| CLK_GSCL2_MASK | |
| CLK_GSCL1_MASK | |
| CLK_GSCL0_MASK); |
| |
| /* CLK_GATE_IP_DISP1 */ |
| clrbits_le32(&clk->gate_ip_disp1, CLK_SMMUTVX_MASK | |
| CLK_ASYNCTVX_MASK | |
| CLK_HDMI_MASK | |
| CLK_MIXER_MASK | |
| CLK_DSIM1_MASK); |
| |
| /* CLK_GATE_IP_MFC */ |
| clrbits_le32(&clk->gate_ip_mfc, CLK_SMMUMFCR_MASK | |
| CLK_SMMUMFCL_MASK | |
| CLK_MFC_MASK); |
| |
| /* CLK_GATE_IP_GEN */ |
| clrbits_le32(&clk->gate_ip_gen, CLK_SMMUMDMA1_MASK | |
| CLK_SMMUJPEG_MASK | |
| CLK_SMMUROTATOR_MASK | |
| CLK_MDMA1_MASK | |
| CLK_JPEG_MASK | |
| CLK_ROTATOR_MASK); |
| |
| /* CLK_GATE_IP_FSYS */ |
| clrbits_le32(&clk->gate_ip_fsys, CLK_WDT_IOP_MASK | |
| CLK_SMMUMCU_IOP_MASK | |
| CLK_SATA_PHY_I2C_MASK | |
| CLK_SATA_PHY_CTRL_MASK | |
| CLK_MCUCTL_MASK | |
| CLK_NFCON_MASK | |
| CLK_SMMURTIC_MASK | |
| CLK_RTIC_MASK | |
| CLK_MIPI_HSI_MASK | |
| CLK_USBOTG_MASK | |
| CLK_SATA_MASK | |
| CLK_PDMA1_MASK | |
| CLK_PDMA0_MASK | |
| CLK_MCU_IOP_MASK); |
| |
| /* CLK_GATE_IP_PERIC */ |
| clrbits_le32(&clk->gate_ip_peric, CLK_HS_I2C3_MASK | |
| CLK_HS_I2C2_MASK | |
| CLK_HS_I2C1_MASK | |
| CLK_HS_I2C0_MASK | |
| CLK_AC97_MASK | |
| CLK_SPDIF_MASK | |
| CLK_PCM2_MASK | |
| CLK_PCM1_MASK | |
| CLK_I2S2_MASK | |
| CLK_SPI2_MASK | |
| CLK_SPI0_MASK); |
| |
| /* |
| * CLK_GATE_IP_PERIS |
| * Note: Keep CHIPID_APBIF ungated to ensure reading the product ID |
| * register (PRO_ID) works correctly when the OS kernel determines |
| * which chip it is running on. |
| */ |
| clrbits_le32(&clk->gate_ip_peris, CLK_RTC_MASK | |
| CLK_TZPC9_MASK | |
| CLK_TZPC8_MASK | |
| CLK_TZPC7_MASK | |
| CLK_TZPC6_MASK | |
| CLK_TZPC5_MASK | |
| CLK_TZPC4_MASK | |
| CLK_TZPC3_MASK | |
| CLK_TZPC2_MASK | |
| CLK_TZPC1_MASK | |
| CLK_TZPC0_MASK); |
| |
| /* CLK_GATE_BLOCK */ |
| clrbits_le32(&clk->gate_block, CLK_ACP_MASK); |
| |
| /* CLK_GATE_IP_CDREX */ |
| clrbits_le32(&clk->gate_ip_cdrex, CLK_DPHY0_MASK | |
| CLK_DPHY1_MASK | |
| CLK_TZASC_DRBXR_MASK); |
| |
| } |
| |
| void clock_init_dp_clock(void) |
| { |
| struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; |
| |
| /* DP clock enable */ |
| setbits_le32(&clk->gate_ip_disp1, CLK_GATE_DP1_ALLOW); |
| |
| /* We run DP at 267 Mhz */ |
| setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1); |
| } |