| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2007-2010 coresystems GmbH |
| * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <stdint.h> |
| #include <string.h> |
| #include <lib.h> |
| #include <timestamp.h> |
| #include <arch/byteorder.h> |
| #include <arch/io.h> |
| #include <device/pci_def.h> |
| #include <device/pnp_def.h> |
| #include <cpu/x86/lapic.h> |
| #include <pc80/mc146818rtc.h> |
| #include <arch/acpi.h> |
| #include <cbmem.h> |
| #include <console/console.h> |
| #include <bootmode.h> |
| #include <superio/ite/common/ite.h> |
| #include <superio/ite/it8772f/it8772f.h> |
| #include "northbridge/intel/sandybridge/sandybridge.h" |
| #include "northbridge/intel/sandybridge/raminit.h" |
| #include "southbridge/intel/bd82x6x/pch.h" |
| #include "southbridge/intel/bd82x6x/gpio.h" |
| #include <arch/cpu.h> |
| #include <cpu/x86/bist.h> |
| #include <cpu/x86/msr.h> |
| #include <halt.h> |
| #include "gpio.h" |
| #if CONFIG_DRIVERS_UART_8250IO |
| #include <superio/smsc/lpc47n207/lpc47n207.h> |
| #include "superio/smsc/lpc47n207/early_serial.c" |
| #endif |
| #if CONFIG_CHROMEOS |
| #include <vendorcode/google/chromeos/chromeos.h> |
| #endif |
| |
| /* Stumpy USB Reset Disable defined in cmos.layout */ |
| #if CONFIG_USE_OPTION_TABLE |
| #include "option_table.h" |
| #define CMOS_USB_RESET_DISABLE (CMOS_VSTART_stumpy_usb_reset_disable >> 3) |
| #else |
| #define CMOS_USB_RESET_DISABLE (400 >> 3) |
| #endif |
| #define USB_RESET_DISABLE_MAGIC (0xdd) /* Disable if set to this */ |
| |
| #define DUMMY_DEV PNP_DEV(0x2e, 0) |
| #define SERIAL_DEV PNP_DEV(0x2e, IT8772F_SP1) |
| #define GPIO_DEV PNP_DEV(0x2e, IT8772F_GPIO) |
| |
| static void pch_enable_lpc(void) |
| { |
| /* Set COM1/COM2 decode range */ |
| pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0010); |
| |
| #if CONFIG_DRIVERS_UART_8250IO |
| /* Enable SuperIO + PS/2 Keyboard/Mouse + COM1 + lpc47n207 config*/ |
| pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | KBC_LPC_EN |\ |
| CNF2_LPC_EN | COMA_LPC_EN); |
| |
| /* map full 256 bytes at 0x1600 to the LPC bus */ |
| pci_write_config32(PCH_LPC_DEV, LPC_GEN1_DEC, 0xfc1601); |
| |
| try_enabling_LPC47N207_uart(); |
| #else |
| /* Enable SuperIO + PS/2 Keyboard/Mouse */ |
| pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | KBC_LPC_EN); |
| #endif |
| } |
| |
| static void rcba_config(void) |
| { |
| u32 reg32; |
| |
| southbridge_configure_default_intmap(); |
| |
| /* Disable unused devices (board specific) */ |
| reg32 = RCBA32(FD); |
| reg32 |= PCH_DISABLE_ALWAYS; |
| RCBA32(FD) = reg32; |
| } |
| |
| static void early_pch_init(void) |
| { |
| u8 reg8; |
| |
| // reset rtc power status |
| reg8 = pci_read_config8(PCH_LPC_DEV, 0xa4); |
| reg8 &= ~(1 << 2); |
| pci_write_config8(PCH_LPC_DEV, 0xa4, reg8); |
| } |
| |
| static void setup_sio_gpios(void) |
| { |
| /* |
| * GPIO10 as USBPWRON12# |
| * GPIO12 as USBPWRON13# |
| */ |
| it8772f_gpio_setup(DUMMY_DEV, 1, 0x05, 0x05, 0x00, 0x05, 0x05); |
| |
| /* |
| * GPIO22 as wake SCI# |
| */ |
| it8772f_gpio_setup(DUMMY_DEV, 2, 0x04, 0x04, 0x00, 0x04, 0x04); |
| |
| /* |
| * GPIO32 as EXTSMI# |
| */ |
| it8772f_gpio_setup(DUMMY_DEV, 3, 0x04, 0x04, 0x00, 0x04, 0x04); |
| |
| /* |
| * GPIO45 as LED_POWER# |
| */ |
| it8772f_gpio_setup(DUMMY_DEV, 4, 0x20, 0x20, 0x20, 0x20, 0x20); |
| |
| /* |
| * GPIO51 as USBPWRON8# |
| * GPIO52 as USBPWRON1# |
| */ |
| it8772f_gpio_setup(DUMMY_DEV, 5, 0x06, 0x06, 0x00, 0x06, 0x06); |
| it8772f_gpio_setup(DUMMY_DEV, 6, 0x00, 0x00, 0x00, 0x00, 0x00); |
| } |
| |
| #include <cpu/intel/romstage.h> |
| void main(unsigned long bist) |
| { |
| int boot_mode = 0; |
| int cbmem_was_initted; |
| |
| struct pei_data pei_data = { |
| .pei_version = PEI_VERSION, |
| .mchbar = DEFAULT_MCHBAR, |
| .dmibar = DEFAULT_DMIBAR, |
| .epbar = DEFAULT_EPBAR, |
| .pciexbar = CONFIG_MMCONF_BASE_ADDRESS, |
| .smbusbar = SMBUS_IO_BASE, |
| .wdbbar = 0x4000000, |
| .wdbsize = 0x1000, |
| .hpet_address = CONFIG_HPET_ADDRESS, |
| .rcba = DEFAULT_RCBABASE, |
| .pmbase = DEFAULT_PMBASE, |
| .gpiobase = DEFAULT_GPIOBASE, |
| .thermalbase = 0xfed08000, |
| .system_type = 0, // 0 Mobile, 1 Desktop/Server |
| .tseg_size = CONFIG_SMM_TSEG_SIZE, |
| .spd_addresses = { 0xa0, 0x00,0xa4,0x00 }, |
| .ts_addresses = { 0x00, 0x00, 0x00, 0x00 }, |
| .ec_present = 0, |
| // 0 = leave channel enabled |
| // 1 = disable dimm 0 on channel |
| // 2 = disable dimm 1 on channel |
| // 3 = disable dimm 0+1 on channel |
| .dimm_channel0_disabled = 2, |
| .dimm_channel1_disabled = 2, |
| .max_ddr3_freq = 1333, |
| .usb_port_config = { |
| { 1, 0, 0x0080 }, /* P0: Front port (OC0) */ |
| { 1, 1, 0x0040 }, /* P1: Back port (OC1) */ |
| { 1, 0, 0x0040 }, /* P2: MINIPCIE1 (no OC) */ |
| { 1, 0, 0x0040 }, /* P3: MMC (no OC) */ |
| { 1, 2, 0x0080 }, /* P4: Front port (OC2) */ |
| { 0, 0, 0x0000 }, /* P5: Empty */ |
| { 0, 0, 0x0000 }, /* P6: Empty */ |
| { 0, 0, 0x0000 }, /* P7: Empty */ |
| { 1, 4, 0x0040 }, /* P8: Back port (OC4) */ |
| { 1, 4, 0x0040 }, /* P9: MINIPCIE3 (no OC) */ |
| { 1, 4, 0x0040 }, /* P10: BLUETOOTH (no OC) */ |
| { 0, 4, 0x0000 }, /* P11: Empty */ |
| { 1, 6, 0x0040 }, /* P12: Back port (OC6) */ |
| { 1, 5, 0x0040 }, /* P13: Back port (OC5) */ |
| }, |
| }; |
| |
| timestamp_init(get_initial_timestamp()); |
| timestamp_add_now(TS_START_ROMSTAGE); |
| |
| if (bist == 0) |
| enable_lapic(); |
| |
| pch_enable_lpc(); |
| |
| /* Enable GPIOs */ |
| pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); |
| pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); |
| setup_pch_gpios(&stumpy_gpio_map); |
| setup_sio_gpios(); |
| |
| /* Early SuperIO setup */ |
| it8772f_ac_resume_southbridge(DUMMY_DEV); |
| ite_kill_watchdog(GPIO_DEV); |
| ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); |
| console_init(); |
| |
| init_bootmode_straps(); |
| |
| /* Halt if there was a built in self test failure */ |
| report_bist_failure(bist); |
| |
| if (MCHBAR16(SSKPD) == 0xCAFE) { |
| printk(BIOS_DEBUG, "soft reset detected\n"); |
| boot_mode = 1; |
| |
| /* System is not happy after keyboard reset... */ |
| printk(BIOS_DEBUG, "Issuing CF9 warm reset\n"); |
| outb(0x6, 0xcf9); |
| halt(); |
| } |
| |
| /* Perform some early chipset initialization required |
| * before RAM initialization can work |
| */ |
| sandybridge_early_initialization(SANDYBRIDGE_MOBILE); |
| printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); |
| |
| boot_mode = southbridge_detect_s3_resume() ? 2 : 0; |
| |
| post_code(0x38); |
| /* Enable SPD ROMs and DDR-III DRAM */ |
| enable_smbus(); |
| |
| /* Prepare USB controller early in S3 resume */ |
| if (boot_mode == 2) { |
| /* |
| * For Stumpy the back USB ports are reset on resume |
| * so default to resetting the controller to make the |
| * kernel happy. There is a CMOS flag to disable the |
| * controller reset in case the kernel can tolerate |
| * the device power loss better in the future. |
| */ |
| u8 magic = cmos_read(CMOS_USB_RESET_DISABLE); |
| |
| if (magic == USB_RESET_DISABLE_MAGIC) { |
| printk(BIOS_DEBUG, "USB Controller Reset Disabled\n"); |
| enable_usb_bar(); |
| } else { |
| printk(BIOS_DEBUG, "USB Controller Reset Enabled\n"); |
| } |
| } else { |
| /* Ensure USB reset on resume is enabled at boot */ |
| cmos_write(0, CMOS_USB_RESET_DISABLE); |
| } |
| |
| post_code(0x39); |
| pei_data.boot_mode = boot_mode; |
| timestamp_add_now(TS_BEFORE_INITRAM); |
| sdram_initialize(&pei_data); |
| |
| timestamp_add_now(TS_AFTER_INITRAM); |
| post_code(0x3a); |
| /* Perform some initialization that must run before stage2 */ |
| early_pch_init(); |
| post_code(0x3b); |
| |
| rcba_config(); |
| post_code(0x3c); |
| |
| quick_ram_check(); |
| post_code(0x3e); |
| |
| cbmem_was_initted = !cbmem_recovery(boot_mode==2); |
| if (boot_mode!=2) |
| save_mrc_data(&pei_data); |
| |
| if (boot_mode==2 && !cbmem_was_initted) { |
| /* Failed S3 resume, reset to come up cleanly */ |
| outb(0x6, 0xcf9); |
| halt(); |
| } |
| northbridge_romstage_finalize(boot_mode==2); |
| |
| post_code(0x3f); |
| #if CONFIG_CHROMEOS |
| init_chromeos(boot_mode); |
| #endif |
| timestamp_add_now(TS_END_ROMSTAGE); |
| } |