| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include "mainboard.h" |
| |
| #include <vendorcode/amd/agesa/f15tn/AGESA.h> |
| |
| /* Include the files that instantiate the configuration definitions. */ |
| #include <vendorcode/amd/agesa/f15tn/Include/AdvancedApi.h> |
| #include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuFamilyTranslation.h> |
| #include <vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatures.h> |
| #include <vendorcode/amd/agesa/f15tn/Proc/CPU/heapManager.h> |
| /* AGESA nonsense: the next two headers depend on heapManager.h */ |
| #include <vendorcode/amd/agesa/f15tn/Proc/Common/CreateStruct.h> |
| #include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuEarlyInit.h> |
| /* These tables are optional and may be used to adjust memory timing settings */ |
| #include <vendorcode/amd/agesa/f15tn/Proc/Mem/mm.h> |
| #include <vendorcode/amd/agesa/f15tn/Proc/Mem/mn.h> |
| |
| /* Select the CPU family */ |
| #define INSTALL_FAMILY_15_MODEL_1x_SUPPORT TRUE |
| |
| /* Select the CPU socket type */ |
| #define INSTALL_FS1_SOCKET_SUPPORT TRUE |
| #define INSTALL_FP2_SOCKET_SUPPORT TRUE |
| |
| //#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE |
| //#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE |
| #define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE |
| //#define BLDOPT_REMOVE_ECC_SUPPORT TRUE |
| #define BLDOPT_REMOVE_SRAT FALSE |
| #define BLDOPT_REMOVE_WHEA FALSE |
| #define BLDOPT_REMOVE_CRAT TRUE |
| |
| /* Build configuration values here. */ |
| #define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE |
| |
| #define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE |
| #define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE |
| #define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE |
| #define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE |
| #define BLDCFG_ENABLE_ECC_FEATURE TRUE |
| #define BLDCFG_ECC_SYNC_FLOOD FALSE |
| |
| #define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED |
| #define BLDCFG_UMA_ALLOCATION_SIZE 0x2000 /* (0x2000 << 16) = 512M */ |
| |
| #define BLDCFG_IOMMU_SUPPORT TRUE |
| |
| #define BLDCFG_CFG_GNB_HD_AUDIO TRUE |
| |
| /* |
| * The GPIO control is not well documented in AGESA, but is in the BKDG |
| * |
| * Eg. FANIN1/GPIO57 on datasheet means power-on default (Function0) is to route |
| * from this ball to hardware monitor as FAN1 tacho input. Selecting Function1 |
| * routes this to the GPIO block instead. Seems ACPI GPIOs and related GEVENTs |
| * are mostly in Function1, sometimes Function2. |
| * |
| * Note that the GpioOut bit does not mean that the GPIO is an output. That bit |
| * actually controls the output value, so GpioOut means "default to set". |
| * PullUpB is an inverted logic, so setting this bit means we're actually |
| * disabling the internal pull-up. The PullDown bit is NOT inverted logic. |
| * The output driver can be disabled with the GpioOutEnB bit, which is again, |
| * inverted logic. To make the list more readable, we define a few local macros |
| * to state what we mean. |
| */ |
| #define OUTPUT_HIGH (GpioOut) |
| #define OUTPUT_LOW (0) |
| #define INPUT (GpioOutEnB) |
| #define PULL_UP (0) |
| #define PULL_DOWN (PullDown | PullUpB) |
| #define PULL_NONE (PullUpB) |
| |
| GPIO_CONTROL pavilion_m6_1035dx_gpio[] = { |
| {57, Function1, OUTPUT_HIGH | PULL_NONE}, /* WLAN enable */ |
| {-1} |
| }; |
| #define BLDCFG_FCH_GPIO_CONTROL_LIST (pavilion_m6_1035dx_gpio) |
| |
| /* |
| * These definitions could be moved to a common Hudson header, should we decide |
| * to provide our own, saner SCI mapping function |
| */ |
| #define GEVENT_PIN(gpe) ((gpe) + 0x40) |
| #define SCI_MAP_OHCI_12_0 0x58 |
| #define SCI_MAP_OHCI_13_0 0x59 |
| #define SCI_MAP_XHCI_10_0 0x78 |
| #define SCI_MAP_PWRBTN 0x73 |
| |
| SCI_MAP_CONTROL m6_1035dx_sci_map[] = { |
| {GEVENT_PIN(EC_SCI_GEVENT), EC_SCI_GPE}, |
| {GEVENT_PIN(EC_LID_GEVENT), EC_LID_GPE}, |
| {GEVENT_PIN(PCIE_GEVENT), PCIE_GPE}, |
| {SCI_MAP_OHCI_12_0, PME_GPE}, |
| {SCI_MAP_OHCI_13_0, PME_GPE}, |
| {SCI_MAP_XHCI_10_0, PME_GPE}, |
| {SCI_MAP_PWRBTN, PME_GPE}, |
| }; |
| #define BLDCFG_FCH_SCI_MAP_LIST (m6_1035dx_sci_map) |
| |
| /* |
| * Process the options... |
| * This file include MUST occur AFTER the user option selection settings. |
| * AGESA nonsense: Moving this include up will break AGESA. |
| */ |
| #include <PlatformInstall.h> |