| # |
| # This file is part of the coreboot project. |
| # |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; version 2 of the License. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| chip northbridge/amd/agesa/family14/root_complex |
| device cpu_cluster 0 on |
| chip cpu/amd/agesa/family14 |
| device lapic 0 on end |
| end |
| end |
| device domain 0 on |
| subsystemid 0x1022 0x1510 inherit |
| chip northbridge/amd/agesa/family14 |
| device pci 0.0 on end # Root Complex |
| device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] |
| #device pci 1.1 on end # Internal HDMI Audio |
| device pci 4.0 on end # PCIE P2P bridge |
| device pci 5.0 on end # PCIE P2P bridge |
| device pci 6.0 on end # PCIE P2P bridge |
| device pci 7.0 on end # PCIE P2P bridge on-board NIC |
| device pci 8.0 off end # NB/SB Link P2P bridge |
| end # agesa northbridge |
| |
| chip southbridge/amd/cimx/sb800 |
| device pci 11.0 on end # SATA |
| device pci 12.0 on end # OHCI USB 0-4 |
| device pci 12.2 on end # EHCI USB 0-4 |
| device pci 13.0 on end # OHCI USB 5-9 |
| device pci 13.2 on end # EHCI USB 5-9 |
| device pci 14.0 on end # SM |
| device pci 14.1 off end # IDE 0x439c |
| device pci 14.2 on end # HDA 0x4383 |
| device pci 14.3 on # LPC 0x439d |
| chip superio/winbond/w83627dhg |
| device pnp 4e.0 off end # Floppy |
| device pnp 4e.1 off end # Parallel Port |
| device pnp 4e.2 on # COM1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 4e.3 on # COM2 |
| io 0x60 = 0x2f8 |
| irq 0x70 = 3 |
| end |
| device pnp 4e.5 on # Keyboard, Mouse |
| io 0x60 = 0x60 |
| io 0x62 = 0x64 |
| irq 0x70 = 1 |
| irq 0x72 = 12 |
| end |
| #device pnp 4e.6 off end # SPI |
| device pnp 4e.307 off end # GPIO6 |
| device pnp 4e.8 off end # WDTO, PLED |
| device pnp 4e.009 off end # GPIO2 |
| device pnp 4e.109 off end # GPIO3 |
| device pnp 4e.209 off end # GPIO4 |
| device pnp 4e.309 off end # GPIO5 |
| device pnp 4e.A off end # ACPI |
| device pnp 4e.B off end # HW Monitor |
| end # w83627dhg |
| end #LPC |
| device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} |
| device pci 14.5 off end # OHCI FS/LS USB |
| device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) |
| device pci 15.0 on end # PCIe PortA |
| device pci 15.1 on end # PCIe PortB |
| device pci 15.2 on end # PCIe PortC |
| device pci 15.3 on end # PCIe PortD |
| device pci 16.0 off end # OHCI USB 10-13 |
| device pci 16.2 off end # EHCI USB 10-13 |
| register "gpp_configuration" = "4" #1:1:1:1 |
| register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE |
| end #southbridge/amd/cimx/sb800 |
| |
| chip northbridge/amd/agesa/family14 |
| |
| # These seem unnecessary |
| device pci 18.0 on end |
| device pci 18.1 on end |
| device pci 18.2 on end |
| device pci 18.3 on end |
| device pci 18.4 on end |
| device pci 18.5 on end |
| device pci 18.6 on end |
| device pci 18.7 on end |
| |
| register "spdAddrLookup" = " |
| { |
| { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses |
| { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses |
| }" |
| end # agesa northbridge |
| |
| end #domain |
| end #northbridge/amd/agesa/family14/root_complex |