| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <console/console.h> |
| #include <drivers/ipmi/ipmi_kcs.h> |
| #include <drivers/ipmi/ocp/ipmi_ocp.h> |
| #include <drivers/vpd/vpd.h> |
| #include <fsp/api.h> |
| #include <FspmUpd.h> |
| #include <soc/romstage.h> |
| |
| #include "chip.h" |
| #include "ipmi.h" |
| #include "vpd.h" |
| |
| /* |
| * Search from VPD_RW first then VPD_RO for UPD config variables, |
| * overwrites them from VPD if it's found. |
| */ |
| static void mainboard_config_upd(FSPM_UPD *mupd) |
| { |
| uint8_t val; |
| int val_int; |
| |
| /* Send FSP log message to SOL */ |
| if (vpd_get_bool(FSP_LOG, VPD_RW_THEN_RO, &val)) |
| mupd->FspmConfig.SerialIoUartDebugEnable = val; |
| else { |
| printk(BIOS_INFO, "Not able to get VPD %s, default set " |
| "SerialIoUartDebugEnable to %d\n", FSP_LOG, FSP_LOG_DEFAULT); |
| mupd->FspmConfig.SerialIoUartDebugEnable = FSP_LOG_DEFAULT; |
| } |
| mupd->FspmConfig.SerialIoUartDebugIoBase = 0x2f8; |
| |
| if (mupd->FspmConfig.SerialIoUartDebugEnable) { |
| /* FSP debug log level */ |
| if (vpd_get_int(FSP_LOG_LEVEL, VPD_RW_THEN_RO, &val_int)) { |
| if (val_int < 0 || val_int > 0x0f) { |
| printk(BIOS_DEBUG, "Invalid DebugPrintLevel value from VPD: " |
| "%d\n", val_int); |
| val_int = FSP_LOG_LEVEL_DEFAULT; |
| } |
| printk(BIOS_DEBUG, "Setting DebugPrintLevel %d from VPD\n", val_int); |
| mupd->FspmConfig.DebugPrintLevel = (uint8_t)val_int; |
| } else { |
| printk(BIOS_INFO, "Not able to get VPD %s, default set " |
| "DebugPrintLevel to %d\n", FSP_LOG_LEVEL, |
| FSP_LOG_LEVEL_DEFAULT); |
| mupd->FspmConfig.DebugPrintLevel = FSP_LOG_LEVEL_DEFAULT; |
| } |
| } |
| |
| /* Enable DCI */ |
| if (vpd_get_bool(FSP_DCI, VPD_RW_THEN_RO, &val)) { |
| printk(BIOS_DEBUG, "Setting DciEn %d from VPD\n", val); |
| mupd->FspmConfig.PchDciEn = val; |
| } else { |
| printk(BIOS_INFO, "Not able to get VPD %s, default set " |
| "DciEn to %d\n", FSP_DCI, FSP_DCI_DEFAULT); |
| mupd->FspmConfig.PchDciEn = FSP_DCI_DEFAULT; |
| } |
| |
| /* |
| * UnusedUpdSpace0[0] is reserved for Memory Refresh Watermark. |
| * Following code is effective when MemRefreshWaterMark patch is added to FSP |
| * and when corresponding VPD variable is set. |
| */ |
| if (vpd_get_int(FSPM_MEMREFRESHWATERMARK, VPD_RW_THEN_RO, &val_int)) { |
| if (val_int < 0 || val_int > 2) { |
| printk(BIOS_DEBUG, "Invalid MemRefreshWatermark value from VPD: " |
| "%d\n", val_int); |
| val_int = FSPM_MEMREFRESHWATERMARK_DEFAULT; |
| } |
| printk(BIOS_DEBUG, "Setting MemRefreshWatermark %d from VPD\n", val_int); |
| mupd->FspmConfig.UnusedUpdSpace0[0] = (uint8_t)val_int; |
| } |
| } |
| |
| /* Update bifurcation settings according to different Configs */ |
| static void oem_update_iio(FSPM_UPD *mupd) |
| { |
| uint8_t pcie_config = 0; |
| |
| /* Default set to PCIE_CONFIG_C first */ |
| mupd->FspmConfig.IioConfigIOU0[0] = IIO_BIFURCATE_x4x4x4x4; |
| mupd->FspmConfig.IioConfigIOU1[0] = IIO_BIFURCATE_x4x4x4x4; |
| mupd->FspmConfig.IioConfigIOU2[0] = IIO_BIFURCATE_xxxxxxxx; |
| mupd->FspmConfig.IioConfigIOU3[0] = IIO_BIFURCATE_xxxxxx16; |
| mupd->FspmConfig.IioConfigIOU4[0] = IIO_BIFURCATE_xxxxxxxx; |
| /* Update IIO bifurcation according to different Configs */ |
| if (ipmi_get_pcie_config(&pcie_config) == CB_SUCCESS) { |
| printk(BIOS_DEBUG, "get IPMI PCIe config: %d\n", pcie_config); |
| switch (pcie_config) { |
| case PCIE_CONFIG_A: |
| mupd->FspmConfig.IioConfigIOU0[0] = IIO_BIFURCATE_xxxxxxxx; |
| mupd->FspmConfig.IioConfigIOU3[0] = IIO_BIFURCATE_xxxxxxxx; |
| break; |
| case PCIE_CONFIG_B: |
| mupd->FspmConfig.IioConfigIOU0[0] = IIO_BIFURCATE_xxxxxxxx; |
| mupd->FspmConfig.IioConfigIOU3[0] = IIO_BIFURCATE_x4x4x4x4; |
| break; |
| case PCIE_CONFIG_D: |
| mupd->FspmConfig.IioConfigIOU3[0] = IIO_BIFURCATE_x4x4x4x4; |
| break; |
| case PCIE_CONFIG_C: |
| default: |
| break; |
| } |
| } else { |
| printk(BIOS_ERR, "%s failed to get IPMI PCIe config\n", __func__); |
| } |
| } |
| |
| /* |
| * Configure GPIO depend on platform |
| */ |
| static void mainboard_config_gpios(FSPM_UPD *mupd) |
| { |
| /* To be implemented */ |
| } |
| |
| static void mainboard_config_iio(FSPM_UPD *mupd) |
| { |
| uint8_t index; |
| const config_t *config = config_of_soc(); |
| |
| oem_update_iio(mupd); |
| |
| for (index = 0; index < MAX_PCH_PCIE_PORT; index++) { |
| mupd->FspmConfig.PchPcieForceEnable[index] = |
| config->pch_pci_port[index].ForceEnable; |
| mupd->FspmConfig.PchPciePortLinkSpeed[index] = |
| config->pch_pci_port[index].PortLinkSpeed; |
| } |
| |
| mupd->FspmConfig.PchPcieRootPortFunctionSwap = 0x00; |
| /* The default value is 0XFF in FSP, set it to 0xFE by platform */ |
| mupd->FspmConfig.PchPciePllSsc = 0xFE; |
| } |
| |
| void mainboard_memory_init_params(FSPM_UPD *mupd) |
| { |
| /* Since it's the first IPMI command, it's better to run get BMC |
| selftest result first */ |
| if (ipmi_kcs_premem_init(CONFIG_BMC_KCS_BASE, 0) == CB_SUCCESS) { |
| ipmi_set_post_start(CONFIG_BMC_KCS_BASE); |
| init_frb2_wdt(); |
| } |
| |
| mainboard_config_gpios(mupd); |
| mainboard_config_iio(mupd); |
| mainboard_config_upd(mupd); |
| } |
| |
| void mainboard_rtc_failed(void) |
| { |
| if (ipmi_set_cmos_clear() == CB_SUCCESS) |
| printk(BIOS_DEBUG, "%s: IPMI set cmos clear successful\n", __func__); |
| else |
| printk(BIOS_ERR, "%s: IPMI set cmos clear failed\n", __func__); |
| } |